Used Fps for sale (288)

Condition: used, Year of construction: 2021, Universal tool milling machine Manufacturer: FPS Model: 620 M-NC Year of manufacture: 2021 - workshop inspected Machine No.: 00 7020 Approx. 1,200 operating hours for the spindle Geometric acceptance with test report Accessories and installed options: - 3D control system SIEMENS 840D sl - Portable electronic handwheel - LED machine light - Machine type switch via key switch to machine tool type, manually controlled milling machine. With the machine open, the manual operation mode and the electronic handwheel can be used. The functions of axis movement and speed control are possible without having to continuously press the enable button. The machine type switch only affects the vertical machining. - Mechanical safety handwheels with scale in all axes - Orientated spindle holder, vertical and horizontal with cycle for thread cutting without a collet - Fixed table 820 x 420 (T-slot: 14 mm) - Tool holder, vertical and horizontal SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system, free-standing, 80 liters - Splash guard cabin, moving with the machine with sliding doors and foldable, electrically secured - Control panel mounted on the lower frame and swiveling - CE documentation in printed form and on USB stick Dodpszy Eqrsfx Acpjku - CE declaration of conformity Used, as is The machine is technically in the condition of its year of manufacture.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : Dsdpfxevbifge Acpeku We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, Deckel FP1 FPS retrofitted tool milling machine with 3-axis Heidenhain digital readout. The machine is in very good condition and comes from a training department. Adjustable tilting table, SK 40 spindle taper. Accessories include various collets and arbor holders. In good, ready-to-use condition. Test run under power can be arranged by appointment. Dedpfx Aoy Dz T Tscpeku

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Djdpfx Acszac Sbopoku

Condition: good (used), 1 x Carrot Batton Machine. 3 Phase. Dkodpfx Acozzzgropou

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake Dkodpfeu Dm E Hjx Acpeu >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 60 mm, total height: 1,935 mm, total length: 2,000 mm, total width: 200 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, overall weight: 1,445 kg, table length: 460 mm, workpiece weight (max.): 400 kg, table load: 400 kg, table width: 800 mm, year of last overhaul: 2013, warranty duration: 6 months, The machine was completely and professionally overhauled by us in 2013. We were able to repurchase the machine from a customer who had used it very little, and we fully serviced and inspected it. Control 3-axis - Active - Digital display HEIDENHAIN TNC 113 Speed 50 - 2500 rpm, geometrically stepped direct drive with 18 speed stages for maximum torque / milling performance Feed 6.3 to 630 mm/min, steplessly adjustable Rapid Traverse 1.3 m/min Quill Extendable quill, vertical 60 mm, SK40 with M16 drawbar thread, optionally: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 500/400/400 mm Djdpfx Aeyitxqocpsku Table Rigid angle table 800x460 mm Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Central lubrication Options • Z-axis bellows • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-holder • etc.

Condition: new, Year of construction: 2026, Through our many years of experience in service, we have decided to develop and produce our own milling machines. The FPS 500M is a conventional milling machine perfect for training and production. Through the Heidenhain Positip 8016 active digital display positioning and for example the creation and approach of a bolt hole circle is possible. Control Heidenhain Positip 8016 Active - Digital display Speed 0 - 3000 rpm geometrically stepped direct gear with 16 gear steps for maximum torque / milling power Feed rate 0 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill extendable quill, vertical 80 mm SK40 optional: horizontal work spindle or horizontal quill (approx. 100mm extendable) Pulling system: hydraulic tightening system - DIN 69872 optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x480mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. - Travelling chip tray - Machine light - Central lubrication - Z-axis bellows Options - universal table - rotary table - Shaper head - dividing head - counterholder Dsdoh Su Ipopfx Acpeku - etc. Further technical data can be found in the attached data sheet.

Condition: new, Year of construction: 2026, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. The FPS 300M is a conventional milling machine perfect for training and production. Control 3-axis - FPS Active - digital display Dsdpfx Acjh I Nqwspsku Speed 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780 — As new condition! Technical specifications: >> Machine No. 55249/08, year 2010 >> Fixed angle table >> Spindle speed: 40–2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories & features: >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the machine: For sale is a Universal Milling Machine Deckel FP1, repowered by FPS, in like-new condition. Included in the scope of delivery are the hydraulic vice with rotary base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel on site under power. The machine is available immediately. Djdpjxu Hbhofx Acpoku

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 10 cup wheels vertical edging machine + Clean 20 floculant water treatment system variable angle 0-45° glass thikness : 3 - 55 mm min. glass dimension : 100 x 100 mm max. load : 1800 kg Dksdpsymxk Hjfx Acpsu height of work surface : 840 mm total power : 20 Kw tank capacity 340 L forward speed : 0,4 - 5,5 m/min. total weight : 3800 kg

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Djdpfx Aetgvgpscpjku Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: used, Year of construction: 2016, functionality: fully functional, working height: 720 mm, Equipment: documentation/manual, Insulating glass production line without automatic sealing machine Maximum pane size: 2500x1600mm Min. pane size: 250x180mm Dksdpfx Ajwikn Recpeu Gas filling press: Models and triple available

Condition: like new (used), Year of construction: 2022, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 20220807 01320A, type of input current: AC, total length: 6,000 mm, total height: 1,850 mm, total width: 1,100 mm, input voltage: 220,380 V, overall weight: 550 kg, input current: 1,215 A, Equipment: clamp, High-Speed Automatic Horizontal Flow Wrapper (Pillow Pack Machine) – Ultra-Low Usage Heavy-duty automatic horizontal flow packaging machine manufactured by Qingdao Bostar Packing Machinery Co., Ltd. Used for a very short period with under 450 total working hours. The machine is in excellent, like-new operational condition. Dedpfxez Ihbao Acpsku Key Technical Specifications & Features: • Condition: Used – Like New (< 450 operating hours) • Gas Flush Option: Equipped with gas flushing capabilities (e.g., Nitrogen injection) for Modified Atmosphere Packaging (MAP) to extend product shelf life. • Construction: Stainless steel frame, machine housing, contact parts, and long product infeed conveyor • Automation & Controls: Integrated Panasonic FP-XH C40T PLC automation unit • Motion Drive: 3-Axis Panasonic Servo Motor System for precise, independent control of infeed, film feeding, and sealing jaw cross-cuts • Infeed & Film Handling: Extended stainless steel belt conveyor with pushers, dual film roll holders, photoelectric eye-mark registration sensor for precise print alignment, and adjustable bag-forming box • Sealing & Cutting: Rotary horizontal sealing jaws with integrated heating elements, rotary brush discharge belt, and pneumatic pressure regulation • HMI Interface: Touchscreen control panel mounted on a swivel arm for easy recipe settings and diagnostics Ideal Applications: Pillow-pack packaging of bakery items (biscuits, wafers, croissants, cakes), confectionery, energy bars, snacks, trays, and various non-food/industrial products. Location: Amman, Jordan Terms: EXW

Condition: used, Year of construction: 1987, Uncoiler manufactured by DREHER, type 2380 F-FPS. Press force approximately --- tons. Year of manufacture 1994. Summary provided – a full technical translation will follow if required for this lot. Djdpfx Ajzynmvocpsku

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: FP11383, The tray sealing machine shown in the photos is for sale. It is in very good condition. The machine seals trays only; it does not have vacuum or modified atmosphere packaging (MAP) functions. It comes with tooling for 5 different tray sizes: - 227x178 mm, -218x128 -218x128mm rounded corners, see pictures, -318x258, 178x128. It can be inspected and tested in Hungary. Djdpfx Acoz Hcpvepoku The price excludes shipping and taxes.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors Dodpfx Asywuihjcpjku - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, 10 cup wheels vertical glass edging machine + water cleaning system Clean 20 glass thikness : 3 - 30 mm min. glass size : 50 x 50 mm max. glass weight : 1000 kg working height : 812 mm total power : 16,3 Kw water tank capacity : 422 L working speed : 0,5 - 5,5 m/min. weight : 2890 kg The machine has worked with a flocculant . 67000 working meters Dkodpfx Acoyhpqaepeu total machine lenght : 720 cm

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 2202 - 11141, Deckel FP 2 M with 3-axis digital Heidenhain ND 780 control Original condition, not repainted Stepless feed rate + rapid traverse Spindle speeds: 25 - 2500 Travel distances: X 400 Y 220 Z Drilling spindle, horizontal + vertical, SK 40 Central lubrication, manual Weight: approx. 1400 kg Electrically monitored chip guard, 2 x emergency stop for compliance with CE standards Dksdpfx Asz Ayzkscpeu Machine vice, collet set, 6 tool holders SK 40, machine feet, lighting. Condition very good, smooth operation at all spindle speeds and flawless guides. Can of course be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Year of construction: 1999, condition: excellent (used), MAJA FPS-40 Dsdopcdfkopfx Acpeku ID.NO. 2560 Maja FPS-40 porting machine for boneless meat products. Portiner with a margin of 0-3 gr. Very easy machine to use and maintain. Dimensions 280 x 70 cm H 175 cm.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Internal article number: 26082 Universal milling machine Dkjdszxgy Sopfx Acpsu Deckel FP4M Overhauled by FPS in 2021 + Hydraulic machine vice, Röhm 135 + Machine lamp / protective cover + Operating manual Dimensions (L x W x H): 140 x 210 x 200 cm Weight: approx. 1500 kg The machine comes from a training workshop and is in very good condition.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, total length: 6,800 mm, total width: 2,500 mm, total height: 3,700 mm, working height: 500 mm, input voltage: 400 V, overall weight: 6,000 kg, type of input current: three-phase, Lisec gas filling press FPS-36/27US, year 2006, working diresction from left to right, consisting of following: - RTVN-27/27MZ, measuring section for gas filling press (length, height, glass thickness and spacer size) - FPS-36/27US, gas filling for argon gas - GML, gas dosing device The machine is in good working condition and will be sold as is EXW current location in Romania, dismantled and loaded to truck. It is available immediately Dkodpfxszpvx Sj Acpou

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: CNC tool milling machine, Deckel Type FP 5 – 80 Year of manufacture 1995 CNC control: Dialog 12 Universal table: 750 x 520 mm Travel distances X / Y / Z: 800 / 550 / 500 mm Dedpfoz Ixi Usx Acpjku Drive power: 9 kW Spindle quill stroke: 80 mm Electronic handwheel Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard.

Condition: used, Year of construction: 2002, CASCADE 100D-FPS-C61X (2002) Reliable forklift attachment from CASCADE, manufactured in 2002. Inspected by our own workshop and ready for immediate use. Dkodpfszwvh Nsx Acpou Why choose this unit? FEM 3 suspension – fits directly onto the corresponding fork carriage. Opening range: 560-2100 mm Fork dimensions: 1050x150x50 Own weight: 774 kg Chassis number: SEL58564-A-251314-3 Delivered after a complete inspection. Available for immediate delivery from 2Bro Trading in Mol. Delivery throughout the Benelux region is possible. Delivered with a new inspection certificate – complete pre-delivery service.

Condition: used, Year of construction: 1988, total length: 1,250 mm, total width: 1,250 mm, total height: 2,400 mm, Colour: Blue Empty weight: 3.000 kg Price: On request - Year: 1988 - Documentation available: No - CE certificate present: No - Serial number: 4441 - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 50 - Min. stroke [mm]: 0 - Max. stroke [mm]: 85 - Table length [mm]: 440 - Table width [mm]: 700 - Table bore diameter [mm]: 270 - Ram width [mm]: 300 - Max. opening height [mm]: 360 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 145 - Transport dimensions: 1250mm x 1250mm x 2400mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Dsdpfez Avbtex Acpsku VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum