Used Dmf 220 for sale (4,975)

Condition: excellent (used), Year of construction: 2004, Deckel Maho 3 axis vertical machining center in good condition with 15781 spindle hours. Well maintained by DMG services in the Netherlands. Immediately available for delivery. Viewing possible upon appointment. More info available on request. Including: ELECTRONIC HANDWHEEL 18.000 RPM HEIDENHAIN MEASURING PROBE MODE 4 DIVIDING WALL CHIP CONVEYOR SCRAPER BELT TYPE IKZ WITH PAPER BELT FILTER BLOWN AIR THROUGH SPINDLE EXTERNAL COOLING OIL MIST SEPARATOR BREAK REMOVAL TOOL WITH LASER RESIN GUN NET SERVICE EXTENSION IBN NET SERVICE Optional: Large set of SK40 tooling and vises/clamping systems available. Cnc control SIEMENS Sinumerik 840D Number of axes 3 Maximum Reach X 2200 mm Maximum Reach Y 560 mm Maximum Reach Z 720 mm Maximum Clamping Height 600 mm Table Size (LxW) 2600x600 mm Maximum Table Load 2200 kg Guide Type Linear Max. Speed 18,000 rpm Max. Power 35 kW Tool Holder SK40 Tool Magazine Capacity 60 Tool Change Duration 9.6 sec Fjloz Hmmrehccqpogh Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Fjlhsy Diabsccqpjgh

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain iTNC 530 Folhcjzg Nmkocqpogh Travel ranges X/Y/Z: 2200 x 560 x 720 mm Spindle speed: 18,000 min-1 Clamping area: 2600 x 600 mm Max. table load: 2200 kg Swiveling head Coolant pressure: 25 bar Tool magazine for 30 tools, SK 40 Optional C or A axis Measuring probe: Heidenhain TS 640 Chip conveyor Paper band filter

Condition: excellent (used), Year of construction: 2008, Vertical machining center Deckel Maho DMF 220 Linear Year of manufacture: 2008 Control: Siemens 840 D Technical specifications: CNC control: Siemens Sinumerik 840D Number of axes: 3 Fgslhccqjy Nbbzjpeh X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Max. clamping height: 600 mm Table size (LxW): 2,600 x 600 mm Max. table load: 2,200 kg Guideway type: Linear guide Max. power: 35 kW Tool holder: SK40 Tool magazine capacity: 60 Tool change time: 9.6 s The machine was in active serial production until recently and was predominantly used for machining steel and aluminum. Equipment: ⦁ Partition wall for setup time optimization (parallel machining / setup in one cabin half) ⦁ Conveyor belt filter system for coolant processing ⦁ Automatic tool changer ⦁ Generous working area for complex components

Condition: used, Year of construction: 2003, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control iTNC 530 Heidenhain turning speed range - milling 20 ~ 12.000 U/min tool taper SK 40 power capacity - milling spindle 35 / 25 kW tool piece magazine with 100 pos. table surface area 2.600 x 600 mm rapid traverse X-axis 100 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg max. table load 2.200 kg total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 7,0 x 4,2 x 2,7 m Fjlhcotumqvecqpsgh Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - incl. 4th Axis 560mm and tailstock (center height 350mm)

Condition: used, mileage: 1,016,268 km, first registration: 03/2011, fuel type: diesel, overall weight: 115 kg, color: white, driver cabin: sleeper cab, emission class: euro5, suspension: air, Year of construction: 2011, RENAULT MIDLUM, TWO-AXLE, WITH WHEELBASE EXTENSION AND RETRACTABLE TAILGATE Fjlhcszk D Nnecqpjgh

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, controller model: Siemens 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 2,200 mm Travel range Y-axis: 560 mm Travel range Z-axis: 720 mm Spindle speed: 20–12,000 rpm Tool holder: SK 40 Spindle power: 35 / 25 kW Tool positions: 32 Felhccszmyd Teqpogh Max. tool length: 300 mm Max. tool weight: 6 kg Table clamping area: 2,600 × 600 mm Max. table load: 2,200 kg Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min MACHINE DETAILS Control system: Siemens 840D Power supply: Three-phase Dimensions & Weight Space requirement: approx. 7,000 × 4,200 × 2,700 mm Machine weight: approx. 12,000 kg EQUIPMENT Documentation / Manual Infinitely adjustable speed Chip conveyor Internal cooling: 40 bar Measuring probe: Renishaw OP60

Condition: used, Year of construction: 2002, x-travel 2.200 mm y-travel 560 mm z-travel 720 mm control 840 D Powerline ShopMill Siemens Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper SK 40 internal coolant system feed 40 bar work table: table surface area 2.600 x 600 mm max. table load 2.200 kg number of T-slots 6 T-slot - width 18 H7 mm T-slot - distance 100 mm Tool-Presetter: number of toolpositions 30 pos. max. tool length 300 mm max. tool weight 6 kg max. tool diameter 80 / 125 mm feeds: feed speeds 20.000 mm/min input unit 0,01 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min Fgslhccqetqmr Ropsh measuring system Resolution 0,001 mm total power requirement 60 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 6,0 x 3,7 x 2,9 m CNC - Machining Center Vertical DECKEL MAHO - DMF 220 linear - from individual part production (aluminium, brass and stainless steel) - incl. workroom wall - M26 function (switching to blown air through spindle center) - new ball screw Z-axis incl. bearing (April 2015) - new milling spindle (2016) - Spindle hours: ca. 11,966 h - WITHOUT vices

Condition: used, Year of construction: 2002, operating hours: 14,704 h, functionality: limited functionality, machine/vehicle number: 15115220654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 660 mm, controller model: Heidenhain iTNC 530, workpiece weight (max.): 2,200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel range X-axis: 2,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 660 mm Rotation B-axis: 105° Spindle speed: max. 18,000 rpm Interface: SK40 Table size, length: 2,600 mm Table size, width: 600 mm Workpiece weight: max. 2,200 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions and weight Dimensions (L x W x H): 6,000 x 3,700 x 2,900 mm Dry weight: 12,500 kg Operating hours: 14,704 h EQUIPMENT Fourth axis with 550 mm clamping surface and hydraulic tailstock Heidenhain measuring probe Spindle cooling Measurement log Coolant tank Filter separator Documentation CE marking Felhjzdd Tneccqpegh Note: Machine vices are not included. The machine is not immediately ready for operation and requires minor repairs. A linear field segment is causing problems.

Year of construction: 2010, condition: new, Spare part for CNC BAZ Manufacturer: DMG MORI Type: DMF 220 Linea Parts are new. Ball screw for Y and Z axis. Folhced S A Unjcqpjgh Guide rail kit for the complete X axis, including brake.

Condition: used, machine/vehicle number: 008700, X axis working area: 3050 mm Y axis working area: 1300 mm Main Electrospindle power: 7.5 KW Folhccqozq Ur Hopogh Number of controlled axes: 3 axes Total number of drilling spindles: 52 Total number of tool changer positions: 6

Condition: good (used), Year of construction: 2019, operating hours: 18,400 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 700 mm, total height: 2,700 mm, total length: 6,335 mm, total width: 4,600 mm, table load: 1,500 kg, overall weight: 16,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 20 rpm, operating hours of spindle: 11,370 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Travel ranges & dynamics • X-axis: 2,600 mm • Y-axis: 700 mm • Z-axis: 700 mm • Rapid traverse rate / feed rate: 40 m/min Folhccez Indhsqpegh Work table (fixed table) • Clamping area: 2,900 x 700 mm • Max. table load: 2,150 kg Milling spindle (standard configuration) • Max. speed: 15,000 rpm • Drive power (40% duty cycle): approx. 18.9 – 20 kW • Tool holder: SK 40 Tool magazine • Tool positions: 30 • Max. tool length: 300 mm

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, pressing force: 220 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table width: 120 mm, table length: 4,270 mm, table height: 900 mm, throat depth: 400 mm, ram plate length: 4,270 mm, distance table to ram: 400 mm, clearance between the columns: 3,820 mm, oil tank capacity: 350 l, total length: 5,370 mm, total width: 2,160 mm, total height: 3,275 mm, overall weight: 16,950 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM-10 220/4270 Touch-B Year of manufacture: 2010 Serial number: 33189 Technical specifications Force: 2200kN Working length: 4270mm Distance between uprights: 3820mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Turbo: PP5400 Approach speed: 120mm/s Working speed: 21mm/s Return speed: 200mm/s Weight: 16950 kg Motor: 37kW Oil capacity: 350 COMMAND CONTROL TOUCH-B • Table PP8170 V-axis • EFL 90/130 • Top tool clamping PP3090 – Wila Felhez Eqwljccqpegh • Back gauge X600 X’ R Z1 Z2 PP8096 • Safety: CE PP3580 – laser-safe • PP1115 manual front support: 2pcs • T-axis Heavy duty 200kg

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Fgolhccoz Dtbwjqpoh Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: L220G0109, turning length: 305 mm, turning diameter: 170 mm, spindle bore: 53 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 330 mm, total height: 1,800 mm, total length: 2,325 mm, total width: 1,600 mm, overall weight: 4,000 kg, bar passage: 45 mm, spindle nose: A2#5, Equipment: documentation/manual, DOOSAN DAEWOO Lynx 220 G CNC lathe - Rated power: 23.68 kVA - Max. load: 11.0 kW - Swing diameter over bed: 510 mm - Swing diameter over cross slide: 290 mm - Max. turning diameter: 170 mm (recommended) - Max. turning diameter (technical): 320 mm Fjlhccsz I Ncxjqpjgh - Travels: X-axis: 400 mm (160 + 15 mm) - Z-axis travel: 330 [550] mm - For further technical data, see the photographed machine specification - Includes documentation and accessories, including a two-jaw chuck, diameter: 165 mm, a tool holder, and a collet chuck 173E-42 B, max. speed: 6000 rpm FCA D-97711 Maßbach – loaded onto a truck.

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving platform Load capacity of the moving platform: 50 kg for VT3 7012 S2 All-round grids in the moving platform secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The hot chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Fgslhccqox Exmtspeh Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Refrigerating unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_2K in the steady state in the moving platform Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you: CNC bed milling machine Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2020 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 46 / 30 kW Torque: 200 / 130 Nm Work table: Table clamping surface: 4,200 x 1,100 mm Rotary table: d 1,050 mm Max. table load: 1,200 kg Tool changer: Number of tool positions: 120 Tool holder: HSK-A 63 Feeds: Rapid traverse (x/y/z): 40 / 40 / 40 m/min Operating hours: approx. 23,850 h Spindle hours: approx. 11,500 h Technical features & accessories: - 5-axis simultaneous machining - NC swivel milling head (B-axis) - Integrated rotary table, arranged on the left, hydraulically clamped - Full enclosure - Coolant tank - Direct measuring systems Fgslhccqjz A Ap Ijpeh - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter, 600 l - 2 rotating viewing windows - Purge air for linear measuring systems - Rotary coupling for spindle - Flushing gun for chip flushing - 2x oil and emulsion mist separators - Blow-off air through the spindle center - Infrared measuring probe, Heidenhain TS 460 (if available) - Preparation for 3D quickSET - MPC – Machine Protection Control - Operating mode 4 - ATC (Application Tuning Cycle) - Preparation for Hofmann dividing head RW-NC 300 (dividing head not included) - Alternating operation - Tool breakage monitoring TRS2 - Tracy surface interpolation Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. Fgjlhccqsz I T Rmopjh tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: HEIDENHAIN TNC 640 CELOS, rotational speed (min.): 20 rpm, rotational speed (max.): 10,000 rpm, DMG MORI DMF 360|11 linear – Traveling Column Milling Machine For sale is a DMG MORI DMF 360|11 linear with extensive equipment and a HEIDENHAIN TNC 640 / CELOS control system. Technical data Travel ranges X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Rapid traverse rate X/Y/Z: 80 / 60 / 60 m/min Linear drive in the X-axis Milling head / Spindle Fgslhccezv Egleqpjh NC swivel milling head, B-axis Spindle speed: 20 – 10,000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK50 / DIN ISO 7388-1-A50 Tool magazine 120 tool positions Chain magazine with dual gripper Mechanical setup aid for tool loading Work table Fixed table with integrated rotary table Rotary table: Ø 1,050 mm Rotary table arranged on the left side Max. load capacity of rotary table: 1,200 kg Hydraulic clamping Control system HEIDENHAIN TNC 640 CELOS 21.5" ERGOline® Control Multi-touch screen Equipment / Options Internal coolant supply 40 bar / 980 l Paper band filter Chip conveyor HEIDENHAIN TS 460 infrared measuring probe Preparation and software option for 3D quickSET MPC – Machine Protection Control Compressed air through the spindle center Oil and emulsion mist extraction system, 2 × 1,600 m³/h 2 rotating viewing windows Purge air for linear measuring systems Direct measuring systems Active cooling for main spindle and linear motor Automatic door drive Electronic handwheel IoTconnector Machine Data Connector (OPC UA / MTConnect / MQTT) NETservice Machine can be inspected by arrangement. Further information, photos and videos available on request.

Condition: excellent (used), Year of construction: 2014, 5-axis machining center Brand: DMG MORI Type: DMF DMU 75 Monoblock Year: 2014 CNC: Heidenhain iTNC530 Equipped with: Integrated rotary table, dia. 600mm / 600kg 35 kW spindle – 18,000 rpm 60-position tool changer TS 649 probe Fjloz E R D Sohccqpogh 3D quickset Center coolant system, 40 bar 600l coolant tank with paper filtration Infrared tool probe Coolant gun Chip conveyor Specifications: Table surface 800 x 650 mm (dia 600 inclinable) X-axis travel 750 mm Y-axis travel 650 mm Z-axis travel 560 mm B-axis -/+120° C-axis 360,000° Spindle speed 2 - 18,000 rpm Spindle power 35 KW Spindle taper SK 40 Rapid traverse XYZ 40 m/min Machine dimensions approx. 3200 x 2600 x H 2900 mm Weight approx. 11,600 kg

Condition: used, Year of construction: 2017, Roll production line, dough band system, Lippelt Rustica Round 220 - Softrounder Year of manufacture: 2017 Condition: used, fully functional Approx. 5530 operating hours Rustica with Softrounder – the all-rounder for processing square and round-shaped wheat rolls With punching station and cutting guillotine – for individual and unique rolls Processes all types of dough, cuts all sizes, stamps patterns into your rolls, or cuts out triangles Ideal for producing rose rolls with fat application 1 to 6-row operation Discharge device for baking trays with a maximum size of 670 x 1000 mm With transverse belt, retractable for the discharge device for further processing Transverse belt with pressure roller and shaping board With seed station (water bath and seed rotating disc), type: Rumo 6 for double-sided seeding Touchscreen control with recipe memory Dough band width 220 mm Fjlsz A Ry Uehccqpsgh Includes 2 punching dies (Veronese 5-row and double oblique cut) Includes shaping cups for 40-80g (5-row) and 80-120g (3-row)

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3mm, solid edge up to 6mm Workpiece height: approx. 10 - 60mm Feed rate: approx. 10m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x120mm, 1x100mm, 3x80mm Easy-Touch control panel EC+ for easy operation of the machine 4 programs can be saved. Machine in Highflex version, highly automated, switching between thin and thick edges via programs. Units: Extended infeed zone Chain track central lubrication, pneumatically manual Glue pot quick-change device, one glue pot currently installed Upper pressure: manual adjustment, PU rollers Infeed guide: manual adjustment with SIKO counter for chip removal Jointing cutter with diamond cutters, sharpened Contact heating shoe for preheating the board Gluing section with automatic edge feed for roll material up to 3mm, switchable for co-rotating and counter-rotating operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edges Cut-off saw with 2 motors, for straight cuts or bevel cuts (program adjustment) Combination milling unit, pneumatically controlled for flush trimming, beveling, and radius Corner rounding cutter R2 with diamond cutter with integrated sensing ring Fgslhccjzzqwmjqpoh Radius trimming blade R2, pneumatically retractable with quick-change device Glue joint trimming blade with large roller, pneumatically controlled Hood locking CE marking All cutting inserts of the milling units and the trimming blades have been replaced or resharpened, saws sharpened, diamond jointing cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been replaced, but is still sharp. Original paint, only a few spots have been touched up. Unfortunately, the machine does not have an operating hour counter, but it still looks very good. Very good condition, see original photos. Machine dimensions: approx. 4550 x 1250 x 1550mm (LxWxH) Weight: approx. 1400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 1950, Safag Type 27 Special Carbide Bit Grinder Brand: Safag Model: 27 Serial Number: 296 Year of Manufacture: Vintage 1950s (approx.) Dual 6" diamond grinding wheels with fine grit (700) Universal tool holder Fgelhsh Izv Ajccqpoh Tool holder for up to 10 mm square-shank tools Coolant tank mounted on the back of the machine 3/4 HP main drive 220 Volts 3-phase Complete factory closure, large selection of storage platforms, pallet racking, shelving units, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2011, Connected load: 10 kW, dust extraction: 1x 120 / 3x 60 / 1x 100 mm, feed rate: 10 m/min, workpiece thickness: 8 - 50 mm, edge thickness: 0.4 - 3.0 mm, roll separation: max. 0.4 - 3.0 mm x 45 mm, working height: 950 mm, dimensions: 4280 x 1300 x 2180 mm, weight: approx. 1400 kg. Location: Nattheim. Fgjlhcszx Tlnjcqpjh

Condition: excellent (used), Year of construction: 2010, Engel Victory 1050/220 Tech with Wittmann W721 robot Year of manufacture: 2010 Injection unit: Screw diameter: 55 mm Shot weight: approx. 480 g Injection pressure: 2053 bar Dosing volume: 511 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 0x0 mm Platen size: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Fslhoz Iprmoccqpegh Air valve x 3 Hydraulic core pull x 3 Control system with hot runner system x 30 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 12200 kg Length/Width/Height: 5.66x1.88x2.10 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request