Used machining centers (vertical) X-axis travel 800-999mm for sale (164)

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 3449, travel distance X-axis: 800 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 700 kg, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 410 mm Z-axis travel: 510 mm Max. workpiece weight: 700 kg Max. spindle speed: 8,000 rpm Spindle taper: ISO 40 Hnolhcjyyi Ukjdwzek MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 2,800 mm Total weight: 6,050 kg EQUIPMENT 20-position tool carousel with ISO 40 tool holder Various tool holders Documentation Fanuc CNC control

Condition: used, Year of construction: 2018, An immaculate ex University research facility machine that is hardly been used. Photographed as it it arrived and not yet cleaned! 2018 built HAAS Mini Mill... Machine Control: Haas CNC Table Size: 36" x 12" Machine Travels (X/Y/Z) : 16" x 12" x 10" (406 x 305 x 254 mm) Spindle To Table Distance : 4" - 14" (100 - 346mm) Table Capacity : 500 Lbs.(1200 Kgs) Spindle Speeds : 6,000 Max RPM Hnslhcjwzyd Esdwzjk Rapid Traverse Rate (X/Y/Z) : 600 IPM (15M/Min) Maximum Cutting Feed Rate : 500 IPM (13 M/Min) Tool Changer Style : Carousel Tool Changer Capacity : 10 Stations Tool Change Time : 4.2 Seconds Max Tool weight : 12 Lbs. Spindle Drive : 7.5 HP Equipped with: 40 Spindle Taper, 10 Station Automatic Tool Changer, Coolant system, Rigid Tapping, Tooling & Manuals Control: HAAS Spec: Travel X406 Y305 Z254 mm | 8000RPM | BT40 Accessories: 40 Spindle Taper, 10 Station Automatic Tool Changer, Coolant system, Rigid Tapping, Tooling & Manuals

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 925 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of axes: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining centre we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Table–spindle distance: 60 – 660 mm • Rapid feed (X/Y/Z): 50 m/min • Max working feed: 50,000 mm/min Helhcey Dc Niodwzjnk • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X–Y–Z optical scales • Operational hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-axis continuous Super-NURBS kit, Center tool programming, Tool length compensation, DNC-DT connection, Tool orientation command Additional equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Shower wash • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper Size BT 50

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 645 mm, workpiece weight (max.): 300 kg, number of axes: 5, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 3,400 mm, total length: 4,430 mm, total width: 2,910 mm, overall weight: 11,000 kg, table length: 500 mm, table width: 500 mm, Equipment: CE marking, LAGUN L 5AX-500 5-Axis Simultaneous Machining Center – Immediately Available The LAGUN L 5AX 500 machining center stands for high precision, robust construction, and cost-effective manufacturing. Ideal for single-part and series production in mechanical engineering, mold making, and contract manufacturing. Your Benefits at a Glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Financing / leasing options available ✔ Compact design with high stability ✔ 24-month warranty Why LAGUN: LAGUN is one of Spain's leading machine tool manufacturers (MAHER HOLDING), known for durable construction, high dynamics, and long-lasting machine concepts. Their machining centers are convincing with reliability, easy maintenance, and low operating costs. Technical Specifications: Control: HEIDENHAIN TNC 7 CNC control system + 16" TFT display HEIDENHAIN motors, scales, and electronic handwheel HR 510 Chip removal: Chip conveyor Enclosure: Fully enclosed with side-opening viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your Advantages as a JMT Customer: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and machine briefing included Hnslhcsfdxkhodwzsk ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide you with a bespoke offer.

Condition: used, Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fagor 8055B-M, table width: 550 mm, table length: 1,000 mm, table load: 550 kg, spindle speed (max.): 10,000 rpm, CNC machining center Hnslhcdsy A Enxowzek Brand: Travis Model: M800 Year: 2006 CNC: Fagor 8055B-M *NO TOOL MAGAZINE, REMOVED AND DISABLED. Travels (X, Y, Z): 800x550x550mm Worktable: 1000x550mm Max. load: 550kg Spindle speed: 10,000rpm Taper: ISO 40 Guides: Linear roller guides Axes: 3 Machine from IAIN Mecanizados workshop in Hospitalet de Llobregat. Schedule a visit to view the machine on site.

Condition: like new (used), Year of construction: 2020, operating hours: 16,785 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, CNC Machining Center Manufacturer: Fehlmann, Model: Picomax 95 Year of manufacture: 2020 Technical Data Make: Fehlmann Model: Picomax 95 Year: 2020 Operating hours: 16,785 total / 7,181 spindle hours Spindle speed: 50 – 18,000 rpm Spindle power: 25.2 kW Max. torque: 120 Nm at 50–2,010 rpm Control: Heidenhain TNC 640 X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,600 x 550 mm, 10 slots, 12H8, 50 mm spacing XYZ positioning accuracy (ISO 230-2): A = 0.005 mm / R = 0.003 mm Electrical connection: 400 V 3P+N+E / 50 Hz / 63 A (T) Standard Equipment - Feed rate range: 1 – 30,000 mm/min (standard) - Automatic tool changer, operator side, main time parallel loading incl. Fehlmann extended tool management on TNC 640 - Direct linear measurement system with pressurized air in XYZ - Pressurized air cleaning with activated carbon filter - Coolant system with chip drawer and fine-chip filter insert, coolant spray gun, chip flushing, machine shutdown via M function - Cooled motor spindle and Y-axis drive - Spindle and thermal expansion compensation - Graphical machine diagnostics system via softkey - Drawer block, lower right - Interfaces: RJ45, USB, RS232 - 48-position chain magazine HSK-A63, double-gripper tool changer. Magazine accessible operator side, parallel to machining - Electronic handwheel HR 510 for TNC 640 - Active cooling system for motor spindle and Y-axis drive - Work area enclosure with polycarbonate safety windows; powder-coated; large-opening stainless steel sliding door at front/top for crane loading - Left side door with lockable polycarbonate windows - Chip flushing via machine bed - FEHLMANN cycle package Special Equipment - Automatic length compensation of the milling spindle via direct measuring system - Tool clamping system HSK-A63 - Leakage sensor to monitor coolant supply through spindle - Automatic right-side enclosure door for PICOMAX 95 - ProfiNet robot interface to PICOMAX as per Fehlmann interface description for customer-specific robot integration - Coolant system 700 l, BF/HD80, with through-spindle cooling, 80 bar, and chip conveyor - Emulsion and oil mist extractor system for work area; programmable operation via M function: on, off, intermittent - 3D probing system Blum TC52LF incl. spindle adapter HSK-A63 - LaserControl Blum LC50-DIGILOG for tool measurement and monitoring D 0.02 – 120 mm - Reference tool HSK-A63, Ø 8 mm - FEHLMANN 5-axis cycle package Automatic Indexing & Swivel Unit ATS 200 D - with Schunk TANDEM center vise KSP100 Automation – Unirobot pro Unirobot M-20iA-10P pro Robot: Fanuc 6-axis industrial robot - Manipulator: FANUC M-20iA - Max. payload: 20 kg - Teach pendant Safety fence system uniprotect Drawer system incl. workpiece carrier ALB - 10 pneumatic drawers with workpiece carriers (400 x 600 mm) FMB quick-change head Workpiece detection via light barrier Profinet interface Robot cell incl. program creation - Double gripper system Hslhceyz Tlvedwzjnk Gripper modules: SCHUNK JGP 100-1 Max. workpiece weight: 3.3 kg All information subject to change. A demonstration is possible at any time in our showroom.

Condition: new, type of input current: AC, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, table length: 1,000 mm, table width: 460 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 36,000 m/min, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS, table load: 400 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L 850 Machining Centre – Available at Short Notice The LAGUN L 850 Machining Centre stands for high precision, robust construction, and cost-effective production. Ideal for single-part manufacturing as well as series production in mechanical engineering, tool and mould making, and contract manufacturing. Your Advantages at a Glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Financing / hire purchase available ✔ Compact design with high stability ✔ 24-month warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING) and is renowned for robust design, high dynamics, and durable machine concepts. The machining centres impress with their reliability, simple maintenance, and low operating costs. Technical Specifications: Control System: HEIDENHAIN TNC 7 CNC control + 16" TFT display HEIDENHAIN motors, measuring systems and electronic handwheel HR 510 Chip Removal: Chip conveyor Preparation: Prepared for 4th axis (rotary table) Enclosure: Hnelhom Tv Sbocdwzek Full enclosure with side-opening viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your Advantages as a JMT Customer: ✔ Official LAGUN distributor in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide a tailored quotation.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC machining center DECKEL MAHO DMC 835V Year of manufacture: 2007 Control: Siemens 840D 4th axis (rotary table) controlled including touch probe Hnjlhsyzywfjcdwzok Technical data: Tool holder: HSK63 Tool changer with 30 positions X-axis: 835 mm Y-axis: 510 mm Z-axis: 510 mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: TNC430, rotary table diameter: 540 mm, spindle speed (max.): 16,000 rpm, operating hours of spindle: 32,000 h, spindle nose: HSK63, number of slots in tool magazine: 30, Equipment: rotational speed infinitely variable, Very well-maintained HERMLE C800-U. Swiveling rotary table: 540 x 540mm Program runtime only approx. 34,000 hours. Field of application: Toolmaking Hnslhcdwex Hg E Tjzsk Service carried out by the manufacturer. Last spindle head replacement: 04/2017 New A-axis drive Heidenhain iR probe

Condition: used, Year of construction: 2005, operating hours: 1,600 h, total height: 2,450 mm, total length: 3,300 mm, total width: 2,200 mm, Empty weight: 5.100 kg Price: On request - Year: 2005 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 1600 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Fanuc - Control system type: 18i-MB - Number of axes [pcs]: 4 - X-axis travel [mm]: 850 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 610 - B-axis rotation [°]: 360 - Tool holder: BT40 - Main spindle power [kW]: 7.5 - Max. spindle speed [rpm]: 8000 - Options: Tool magazine - └ Tool magazine [pcs.]: 16 - Transport dimensions: 3300mm x 2200mm x 2450mm (l x w x h) - Transport weight [kg]: 5100kg Hnslhceyyx Ndodwzok - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Hneljyyybhehcdwzek Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control SIEMENS table-size 1000 x 560 mm Hsleyxxyyshcdwzsnk max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 8.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 20 Pos voltage 380 V total power requirement 35 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 3,50 x 3,50 x 2,70 m - Serial-No.: 15415015634 - Main spindle NEW bearings - Machine ON: 18,484 h Program ON: 9,153 h - SIEMENS control system - With NC sub-unit (4th axis, controlled via M-code) - Chip tray (no chip conveyor) - Coolant system

Condition: good (used), Year of construction: 2010, (ex Formula 1 ) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, C axis, 360 degrees, Heidenhain TNC530, Hnelhcoywv N Ajdwzek Spindle Speed 20000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 30 tools, swarf conveyor, through spindle coolant,

Condition: good (used), Year of construction: 1998, Table size: 1150 x 510 mm Tool holder: BT 40 Travel distances: X-axis: 800 mm Y-axis: 510 mm Z-axis: 510 mm Speed range: max. 10,000 rpm Machine dimensions (L x W x H): 3200 x 2800 x 2497 mm Weight: 6,600 kg Accessories / Special features: • CNC control YASNAC J300M (comparable to "SIEMENS") • 30-station tool changer • Screw chip conveyor • Coolant system Hnslhcdjyyq Niowzjk • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,578 h, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 16,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 80 MonoBLOCK vertical machining center was manufactured in 2005. It features a 16,000 rpm spindle speed, a 40-slot tool changer, and an SK 40 tool holder. Equipped with an NC rotary table, a controlled B-axis in the milling head, and a chip conveyor, this machine is ideal for complex machining tasks. The DECKEL MAHO DMU 80 MonoBLOCK we have for sale is a robust choice for precision engineering. Contact us for more information. Additional equipment • Belt filter system • Coolant system • NC rotary table • Controlled B-axis in the milling head • Chip conveyor included • Coolant system included • 3D probe not included • Zero point clamping system not included • No holders or tools included Hnslhcdwoyyvchezsk Machine Benefits Technical Machine Benefits • Integrated coolant system with 40 bar pressure • Tool changer - number of places : 40 Extra Information Machine still under powerMachine on: 41,600 hSpindle Hours: 15.578h Technical Specification Taper Size SK 40

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, table length: 1,000 mm, table width: 460 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 36,000 m/min, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, spindle nose: SK 40 BIG PLUS (BVD 40), spindle speed (max.): 12,000 rpm, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L 850 Machining Center – Immediately Available The LAGUN L 850 machining center stands for high precision, robust construction, and cost-effective production. Ideal for single-part and series production in mechanical engineering, mold making, and contract manufacturing. Helhcdovn Eq Eswzsnk Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Financing / leasing options available ✔ Compact design with high stability ✔ 24-month warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING) and is known for sturdy construction, high dynamics, and long-lasting machine concepts. These machining centers impress with their reliability, easy maintenance, and low operating costs. Technical specifications: Control: HEIDENHAIN TNC 7 CNC control + 16" TFT screen HEIDENHAIN motors, measuring systems, and HR 510 electronic handwheel Chip disposal: Chip conveyor Preparation: Prepared for 4th axis (rotary table) Enclosure: Full enclosure with side-opening viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ Local technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide a tailored offer

Condition: used, Year of construction: 2010, x-travel 800 mm y-travel 600 mm z-travel 500 mm control Heidenhain iTNC 530 Hnjljy Ay Itohcdwzjk weight of the machine ca. 8300 kg

Condition: used, Year of construction: 2012, machine/vehicle number: 12030320, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table width: 900 mm, table length: 400 mm, overall weight: 3,500 kg, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 23, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This vertical machining center, a Saeilo Contur MMV 810 S, was manufactured in 2012 and is equipped with a Heidenhain TNC 620 control unit featuring an electronic handwheel for precise operation. Travel ranges are X = 810 mm, Y = 400 mm, Z = 500 mm, with a table measuring 900 x 400 mm and fitted with 3 T-slots (size 14 mm). The machine includes a double-arm tool changer with 23 positions, BT40 tool holder, and a high-performance spindle capable of up to 10,000 rpm, oil cooling, and an internal coolant supply system with 20 bar pressure. Spindle speed: 0-10,000 rpm Axis travels: X: 810 mm Y: 400 mm Z: 500 mm Double-arm tool changer with 20 positions Tool holder: BT40 Spindle oil cooling // Internal coolant supply 20 bar Disc-type scraper in coolant tank Air blast cooling through or around the spindle External coolant gun Chip conveyor (spiral type) Central lubrication system Hnjlhcdwsx N E Acozjk Table clamping surface: 900 x 400 mm with 3 x 14 mm T-slots Machine weight: 3,500 kg Includes documentation.

Condition: excellent (used), Year of construction: 2003, operating hours: 49,000 h, functionality: fully functional, Basic Data Hslheyxrr Necdwzsnk Hermle Machining Center C 30 V Year of manufacture: 2003 Serial number: 16112 Technical Specifications Heidenhain iTNC 530 Spindle: 10,000 rpm SK 40 32 tool positions Linear axes, standard version Rigid clamping table Internal coolant supply 40 bar Included / Installed Standard filter Standard chip conveyor Standard coolant system Flange for extraction Purge air for scales Paper band filter for ICS (internal coolant system) Scraper-type conveyor for ICS Automatic cabin door Manual cabin roof Laminated safety glass window Electrical thermal compensation iTNC Renishaw probe incl. preparation Chip wash-down gun Key Information from the Spec Sheet Machine currently still under power Inspection possible by appointment Short-term delivery possible Not Included / Limitations Without tools Without workholding fixtures Machine accessories and documentation only as far as still available (books included) Condition of the Machine: Very good / Exceptionally high quality / Extremely clean and well maintained Single-part production in custom gearbox manufacturing The machine receives substantial annual preventive maintenance – an absolute rarity

Condition: good (used), Year of construction: 2016, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 19979, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 40 mm, feed length Y-axis: 40 mm, feed length Z-axis: 40 mm, nominal power (apparent): 75 kVA, torque: 191 Nm, controller manufacturer: Fanuc, controller model: G-Tech 31 iB, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 450 mm, workpiece diameter (max.): 850 mm, workpiece weight (max.): 500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 90 bar, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, tool length: 350 mm, tool diameter: 80 mm, tool weight: 10,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MX-850 Milling Machine – Year of Manufacture 2016 – Excellent Condition For sale is a reliable and high-performance MX-850 milling machine from 2016. The machine is in good, well-maintained condition and is fully operational. With approximately 14,000 operating hours, the machine has been regularly serviced and professionally used throughout. Particular mention should be made of the spindle, which runs exceptionally smoothly and is almost like new—ensuring precision and high machining quality. The MX-850 stands out for its robust construction, high accuracy, and versatile applications in daily production. It is ideal for a wide range of milling operations and perfectly suited for both single and series production. Equipment & Details: - Model: MX-850 - Year of manufacture: 2016 Hjlsy Dd Exehcdwzjnk - Operating hours: approx. 14,000 h - Condition: good - Spindle: excellent run, nearly as new - Function: perfectly operational, ready for immediate use - Coolant system (Knoll) included - Chip conveyor included - Transformer included Scope of delivery note: The machine is sold without tools, holders, or LANG clamping system – only the machine itself and the above-mentioned peripherals are included. The machine has always been handled with care and regularly maintained. It is currently still in operation and can be inspected by appointment. If you are interested or have further questions, please feel free to contact us.

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Hnslok Iugzohcdwzjk

Year of construction: 2007, condition: good (used), Technical data shown i pdf file in attachment. Parts shown by hand not come. Chucks on the table are not included. Machine vices not come. Heljmnp D Ijhcdwzonk

Condition: good (used), Year of construction: 2007, In good technical condition and fully operational. 4-axis machining center Year of manufacture: 2007 X-axis: 800 mm Hslhjw Tyt Necdwzonk Y-axis: 520 mm Z-axis: 505 mm Spindle speed: 10,000 rpm Spindle taper: 7/24 taper No. 40 Spindle power: 15/18.5 kW (7.5/11) Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 48 m/min Rapid traverse Z-axis: 30 m/min Number of magazine stations: 24 Max. tool length: 300 mm Max. tool diameter: 80 mm Max. tool weight: 8 kg Machine footprint: 3,300 mm x 3,175 mm Machine weight: 7,500 kg Max. machine height: 2,950 mm

Condition: excellent (used), Year of construction: 2013, Travel: X-800 mm, Y-600 mm, Z-500 mm Control: Heidenhain iTNC530 Spindle speed: 15.000 U/min tool magazine: 30 seats probe: Heidenhain electric handwheel: Heidenhain Hjlhcdjyxh Hpjwzjnk table size: 1000 mm x 560 mm Spänewanne: .

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Hjlhcsgqg Sgjdwzenk Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ...