Used Traveling Column Machining Center for sale (71,091)

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Travel Y [mm]: 600 Travel Z [mm]: 800 Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max. drive power: 16 kW at 40% duty cycle Max. torque: 80 Nm at 40% duty cycle Tool holder: SK40 CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Equipment / Accessories: Rotary table as shown Electronic handwheel Dcodpfx Afex Tg Stonoc Chip conveyor

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Dodpfxex Sw Hfs Afnocc Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Machine can be inspected under power by arrangement.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, spindle speed (max.): 15,000 rpm, MMV 4200 GANTRY-TYPE MACHINING CENTER FOR 5-AXIS SIMULTANEOUS MACHINING WITH HEIDENHAIN TNC 640 5-axis simultaneous gantry-type machining center with integrated water-cooled motor spindle. Control: HEIDENHAIN TNC 640 • Conversational programming • USB and Ethernet interface • 24" TFT color monitor • 3D visualization, programming graphics Spindle: Water-cooled motor spindle Spindle power: 46 kW Spindle speed: 50 - 15,000 rpm Spindle torque: 170 Nm Tool holder: ISO 40 DIN 69871 Pull stud: ISO7388/2 Type B (not included in the basic version) Travel: X = 4200 mm, Y = 1000 mm, Z = 950 mm Distance spindle nose to table: 0-950 mm Rapid traverse (X-Y-Z): 60/50/50 m/min B/C axis: 50/100 rpm Fixed table: Cast iron table with T-slots Number - width - spacing: 7 - 18 mm - 125 mm (central alignment slot 18H8) Clamping surface: 4400 x 1050 mm Maximum table load: 6000 kg (evenly distributed) Swivel head (B axis): Torque motor, swivel range +120°/-120° Dsdpfx Afjychf Sjnscc Rotary table (C axis): Torque motor, table diameter 900 mm Maximum table load: 2000 kg Rotary table accuracy: 0.05 mm +/-0.02 mm, recessed under the fixed table Stationary tool changer: Drum magazine on the left side of the machine with 40 tool stations Tool change time (chip-to-chip, VDI2852): approx. 15s Coolant pump: Pressure 6 bar, delivery rate 40 l/min (nominal at pump) Work area lighting: 4 LED lamps Standard equipment: • Linear glass scales in X/Y/Z axes • Central lubrication with grease • Handwheel • Alarm lamp • Work area lighting • Electrical cabinet air conditioner

Condition: used, Year of construction: 2006, operating hours: 13,016 h, functionality: fully functional, machine/vehicle number: 86664, travel distance X-axis: 2,940 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 950 mm, overall weight: 16,500 kg, number of slots in tool magazine: 36, Equipment: documentation/manual, - Year of manufacture: 2006 - One owner, used exclusively by us - Fully functional, powered on, ready for demonstration - Control: Heidenhain iTNC 530 - Control on: 32,532 hours - Program run: 13,016 hours - Spindle: SK 40 / 12,000 rpm | 40 kW - Tool magazine: 36 positions - Travel X-axis: 2,940 mm - Travel Y-axis: 900 mm - Travel Z-axis: 950 mm - Rotary table: Ø1000 mm - 3D probe: RMP 60 Renishaw Dodpsx Hhfbefx Afnecc - Tool probe: TT140 Heidenhain - Coolant through spindle: 40 bar Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 0112, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 9,000 rpm, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! TECHNICAL DETAILS Travel distances Travel X: 1,500 mm Travel Y: 3,500 mm Travel Z: 1,000 mm Worktable dimensions: 4,500 x 1,600 mm Spindle and Tooling Max. spindle speed: 9,000 rpm Swivel range of angular head (B-axis): ±90° Tool holder: SK 40 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,000 x 5,000 x 3,700 mm Weight: 32,000 kg EQUIPMENT 2 ALMATIC machine vices Various clamping devices for the machine Technical documentation Dcodpfx Aew Hrh Hsfnec

Year of construction: 2005, condition: ready for operation (used), X-axis: 2000mm, y-axis: 750mm, z-axis: 800mm, max. workpiece weight: 2.5t, spindle hours: 12000h, connected load: 60kVA, length: 4000mm, width: 3100mm, height: 3200mm, weight: 22t, with documentation and tools, has been regularly serviced, on-site inspection is possible, the machine will be available from July 2024. Dcjdopvk Ahepfx Afnsc

Condition: good (used), Year of construction: 2000, machine/vehicle number: 7853, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table length: 6,000 mm, table width: 2,000 mm, table load: 17,000 kg, Travelling column milling machine | FPT Sirio-M50 - Heidenhain control system - 60-position automatic tool changer - Coolant treatment and filtration unit - Chip conveyor Dcodpfx Afsxzzlhsnoc - Cooling unit, manufacturer Deerosdassi (Italy) - Electrical cabinet - Full machine enclosure (protective housing) An inspection is possible at any time by appointment.

Condition: used, Year of construction: 2000, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, workpiece weight (max.): 1,200 kg, total height: 2,900 mm, total length: 2,995 mm, total width: 2,350 mm, table width: 1,200 mm, table length: 550 mm, table load: 1,200 kg, rotational speed (min.): 35 rpm, rotational speed (max.): 12,000 rpm, overall weight: 6,700 kg, coolant supply: 15 bar, CNC Vertical Traveling Column Machining Centre CNC Control Mazatrol 640 M Table size 1200 x 550 mm Table load 1200 kg Number of pallets: 1 x Movement X-axis 1020 mm Movement Y-axis 510 mm Movement Z-axis 460 mm Spindle taper MAS BT 40 Spindle speed 35 - 12.000 1/min Spindle motor 22/15 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Dodpfoygw D Eex Afnecc Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2009, x-travel 1.800 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 25 / 35 kW max. Torque 130 / 87 Nm tool taper HSK A63 DIN 69893 swivellable B: +/- 100 ° table surface area 2.100 x 700 mm max. table load 1.500 kg number of T-slots 7 table diameter 750 mm max. table load 500 kg number of T-slots 7 rotatable C: 360 ° number of toolpositions 30 pos. tool taper HSK A63 DIN 69893 Dcsdpfxeyhhtgj Afnjc max. tool weight 6,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time chip to chip 7,6 sec rapid traverse ( X / Y / Z ) 40 m/min Accelaration 4 m/s² feed speeds max. 40.000 mm/min Feed force ( X / Y / Z ) 8 kN total power requirement 70 kVA weight of the machine ca. 13,0 t dimensions of the machine ca. 7,0 x 6,2 x 2,8 m 5-Axis CNC - Travel Column Milling Machine DECKEL MAHO - DMF 180 New Design - Swivel-Head (B-Axis) - integrated rotary-table - internal coolant system - Operating-Hours: Spindle-Runtime: ca. 10.000h

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Traveling column machine New machine Work table clamping area mm 1500 x 1000 Table height mm 750 Number of T-slots 6 Size of T-slots DIN 650 mm 18 Travel paths X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top edge - spindle bottom edge min/max. mm 150 / 850 Main spindle drive for speed 8000 min-1 AC motor, frequency controlled kW 16 at 44% ED Speed range: min -1 15 – 8000 Torque at 44% ED Nm 104 constant up to min -1 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect position measuring system. Accuracy Positioning accuracy X, Y axis to 1000 mm mm ± 0.0150 Dcedpjvwip Djfx Afnec Repeatability X, Y axis mm ± 0.0075 Positioning accuracy Z axis mm ± 0.0150 Repeatability Z axis mm ± 0.0075 Tool magazine 24-way - Tool positions 24 - Tool shaft (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Machine control Heidenhain TNC 620

Condition: used, Year of construction: 2013, machine/vehicle number: 5279, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 22 rpm, Year of construction 2013 Control system: SIEMENS Sinumerik 840D pl HSK 100-A tool holder TRAVEL horizontal-longitudinal X = 8,000 mm Vertical headstock slide Y = 1,600 mm Headstock horizontal-transverse Z = 1,300 mm FUNCTIONAL PROBE: m&h HSK 100 SIEMENS B-MPI HAND-HELD CONTROL UNIT TRAVELING WORK PLATFORM 3-SIDED SPRAY AND CHIP PROTECTION WALL CHIP CONVEYOR SPRAYING PLATE Sizes: Length: 10,000 mm Width: 2,500 mm WASHING GUN IN THE WORKROOM REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2000 l COLLISION MONITORING SYSTEM 2 CHANNEL pcs. 2 monitoring channels: - 1st collision monitoring orthogonal milling head (channel 1) - 2nd collision monitoring fork head (channel 2) PENDULUM MACHINING 3 WORK AREAS MILLING SURFACE INTERPOLATION (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATION For fork head, arranged on clamping plate Storage positions 10 Maximum tool weight kg 12.5 Maximum tool length mm 200 Maximum tool diameter mm 63 Maximum tool diameter when free mm 250 Neighboring position Tool holder HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine 48 Maximum tool diameter with magazine filled to mm 125 Maximum tool diameter with mm 250 free adjacent positions Maximum tool length mm 500 - Maximum tool weight kg 25 Maximum tool load torque Nm 40 Tool holder HSK 100-A HEAD CHANGE MAGAZINE Dcodpfx Afou Sppwsnec 1 pc.FORK HEAD WITH HIGH FREQUENCY SPINDLE AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE - High-frequency milling spindle: - Integrated high-frequency spindle - Tool holder HSK - A 63 DIN 69893 - Main drive power 20 kW at 100 % ED or 25 kW at 40 % ED - Speed range up to 20,000 1/min - Motor spindle bearing with permanent grease lubrication - Sealing air seal - Torque: 40 Nm at 100% ED, 50 Nm at 40% ED - Automatic tool clamping - Power transmission according to speed-performance diagram GMN HCS 170 - Technical data according to data sheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN - Liquid-cooled milling head - Cast construction made of GGG 60 - Milling head, automatically swivels 180 x 1 degree - The resulting positions can therefore not only be approached via the CNC control, but also programmed and processed - Repeat accuracy at the spindle nose ±0.002 mm, part accuracy thus ±3 sec - HSK 100-A tool holder - The milling spindle is equipped with a hydromechanical quick tool clamping system - Tool pull-in force: 45 kN - Internal coolant supply form A-D - External coolant supply via shower ring - Speed range 22- 4,000 1/min MAIN DRIVE by a frequency-controlled liquid-cooled AC motor with - 32 kW drive power at 100% duty cycle, 46 kW at 40% duty cycle. Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox. - 637 Nm torque at 100% ED, 875 Nm at 40% ED

Condition: used, Year of construction: 2015, machine/vehicle number: 5319, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,300 mm, BASIC MACHINE PowerSpeed 5 WITH FORK HEAD – KEY TECHNICAL DATA Travels: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive via a centrally bolted rack. Hardened compact roller guides ensure high precision. Machine base (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems ensure dynamic performance and accuracy. Protected by telescopic steel covers. Headstock slide and headstock: Made of GGG 60 cast iron, guided by compact roller guides. Optimal power transmission thanks to long guideways and close arrangement of the Y and Z axes. Dual-spindle drive: Two vertical ball screws with separate drives and measuring systems for high dynamics and long-term accuracy. Drive system: Individual digital drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Dcedpswdub Djfx Afnec Measuring system: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-axis yoke head with motor spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5″ C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3″ Motor spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid-cooled Electrical equipment: 400/230V, 50Hz, 80kVA power rating. Control cabinet (IP54) with control and switching devices. Machine-to-cabinet cable length: 5m. Control cabinet cooling: Two-chamber system with automatic internal air cooling and dehumidification. Lubrication: Centralized lubrication for guides, permanent grease lubrication for the main spindle, oil mist lubrication in the milling head. Power supply: Compressed air 4–6 bar, G 1/4 connection, with filter pressure regulator and condensate separator. Control: Siemens 840D sl with swiveling control panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote maintenance: Fault diagnosis via alarm manager, notification via email/SMS (SIM card and network required). TightBlock base frame (X = 8,000 mm): Solid composite construction for damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm of X-travel, structurally tested. Coolant system: 500 l tank, filter system

Condition: used, Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: PC Fusion 640 M, total height: 3,100 mm, total length: 5,200 mm, total width: 3,460 mm, table width: 2,000 mm, table height: 760 mm, table load: 1,400 kg, overall weight: 12,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, CNC Control Mazatrol PC Fusion 640 M Table size 2000 x 760 mm Table load 1400 kg Number of pallets: 1 x Movement X-axis 1740 mm Movement Y-axis 760 mm Movement Z-axis 660 mm Dcedpfx Ajyddlwsfnec 4th Axis (Rotary table) Kitagawa MR 250 Spindle taper CAT 40 Spindle speed 12.000 1/min Spindle motor 11/7,5 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 8 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, pivoting range: 340 °, table length: 5,000 mm, table width: 1,730 mm, table height: 300 mm, Technical Specifications Travel Paths • X-axis (bed): 5,000 mm Dcjdpfjyf Ai Rsx Afnsc • Y-axis (vertical): 1,600 mm • Z-axis (spindle head): 1,500 (1,200) mm Control System • CNC control: Heidenhain TNC 415 Feed Rate • X, Y and Z axes steplessly adjustable from: 2 – 8,000 mm/min Universal Milling Head in Orthogonal Design • Motor-driven milling head swivel range: 340 degrees • Milling head swivel range: 180 degrees • Tool holder: SK 50 Clamping Table • Clamping surface: 5,000 mm x 1,730 mm • T-slots: 9 x 28 DIN 650 • T-slot spacing: 160 mm Year of Manufacture: 1992 Partial overhaul: 2025 The machine has been recommissioned and inspected at MBM. It can be demonstrated under power at D-73479 Ellwangen. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Our services: - Used machinery - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used CNC milling machine – used boring and milling machine – used metal milling machine – used metalworking mill – used CNC mill – CNC milling machines – CNC milling centers – milling machine – large-part machining – CNC large-part machining – milling – SHW – UF6 – UF 6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Condition: used, Year of construction: 1999, x-travel 5.850 mm y-travel 1.200 mm z-travel 2.000 mm Dcedoydfmiopfx Afnec control HEIDENHAIN TNC 430 D table-size 6.120 x 1.000 mm table weight 20.000 Kg internal coolant system feed 20 bar Chip coveyor inkl. handwheel HEIDENHAIN HR-410 Tools changer 60 fach/tools taper ISO ISO 50 engine output 30 kW working speed 5.000 mm/min rapid taverse 12.000 mm/min Number of revolutions 20 - 3.000 rpm total power requirement 41 kW weight of the machine ca. 31 t

Condition: used, Year of construction: 1999, x-travel 3.400 mm Dedeydfmcjpfx Afnecc y-travel 1.250 mm z-travel 2.000 mm Control TNC- 430 PA table-size 4.700 X 1.200 mm V- travel 500 tool taper ISO 50 milling head -swivable 0.001º/0.001º Grad main drive 37 kW Chip coveyor inkl handwheel HR-410 Tools changer 60 pos. milling head Automatic Head 45º weight of the machine ca. 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1

Condition: used, Year of construction: 2014, operating hours: 24,970 h, machine/vehicle number: 15175183974, Stock no.: 371400, travels X/Y/Z: 1,800x700x700 mm, max. workpiece weight: 1,500 kg, spindle speed: 20 - 8,000 rpm, tool holder: SK40, 60-position tool changer, machine weight: 13,250 kg, equipped with SIEMENS Sinumerik 840D sl control, electronic handwheel, chip conveyor, stock no.: 473100, hydraulic unit, with T-slot clamping table, approx. 210x70 cm, with integrated rotary table, zero-point clamping system, 4x NC vices HILMA NC 125, 1 GARANT Zeroclamp console Dcedoyciunjpfx Afnoc

Condition: excellent (used), Year of construction: 1997, CNC travelling Column machine Table 10,000mm Length x 1100mm Width Djdsx El E Aepfx Afnecc X Travel 8500mm Y Travel 1600mm Z (Ram Travel) 1200mm 60 Station tool changer Integrated horizontal & Vertical rotary table (CNC) Spindle BT50 Spindle 20 - 2000RPM Siemens Sinumerik CNC Control

Condition: new, BRAND NEW TRAVELLING COLUMN MILLING MACHINE HEIDENHAIN TNC 640 CNC control system HEIDENHAIN 19" TFT display HEIDENHAIN package (motors, measuring systems, and HR 550 FS electronic handwheel) X-axis: 8,000 mm (optionally extendable by 1,000 mm increments) Djdpfx Afsh Ekucenjcc Y-axis: 1,500 mm Z-axis: 2,500 mm (optionally extendable by 500 mm increments) Worktable: plate field, rotary table, etc. Automatic universal swivel head 1°x1° - SK 50 DIN69871/A Maximum spindle speed: 6,000 rpm (oil-cooled) Maximum spindle motor power: 66 kW ICS – internal coolant supply – 36 bar Rapid traverse X, Y, Z: 30 m/min Positioning accuracy: 0.040 mm Repeatability: 0.015 mm Chain tool changer: 60 stations (option up to 150 tools) Hinged belt chip conveyor Only enquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: used, Year of construction: 2000, x-travel 6000 mm y-travel 1600 mm z-travel 1300 mm control FIDIA C20 /4H-SB tool taper SK50 spindle turning speed range 22 - 4000 U/min SHW – UFZ5 Year of manufacture: 2000 Specifications X-axis 6000 mm Y-axis 1600 mm (stroke with vertical head rotated 1900 mm) Z-axis 1300 mm Orthogonal head 2 axes, indexed 1° Automatically swivelling milling head holder (rear) 360x1 degree Automatically swivelling milling head holder (front) 180x1 degree Control: Fidia - C20 / 4H-SB SK 50 - DIN 69871 Infinitely variable feed range; X-axis: 2–12,000 mm/min. Y-axis: 2–18,000 mm/min. Dodpexmaqyofx Afnjcc Z-axis: 2–18,000 mm/min. Rapid traverse; X-axis: 12,000 mm/min. Y-axis: 18,000 mm/min. Z-axis: 18,000 mm/min. Spindle/auto. Milling head: Speed 22 - 4,000 rpm Torque max. 1180 Nm Total current load: approx. 50 kVA/80 A. Without clamping plate Without chip conveyor

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm Dcsdpfx Afjxwdygenoc spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: used, Year of construction: 2007, Urban AP 6500 F - travelling column milling machine - Heidenhain path control iTNC 530, control panel can be moved over the entire machining length - robust basic structure as a welded frame construction - ball rail guides on all axes - milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y-/Z-axis with recirculating ball screw (20 m/min) - 6 chip drawers - swivel clamping device for 6200 mm workpiece length - 12 pneumatic workpiece clamps - manually operated central lubrication - moving plate tool changer for 8 tools - micro spray - cooling emulsion pump - machine light - safety fence - safety bumper - safety light grid - machine protection hood opens pneumatically vertically - control on: 33922 h Dcjdpju Awm Ssfx Afnoc - Program run: 9847 h - Spindle on: 7221 h - Year of manufacture 2007 Technical data - Travel paths X/Y/Z: 6500 / 275 / 310 mm - Working area X/Y/Z with swivel device: 6200 / 155 / 110 mm - Rapid traverse X/Y/Z: 30 / 10 / 10 m/min - Continuous feed: 0 - 5000 mm/min - Tool change: Disc changer with 8 tool positions - Tool holder: SK30 - Tool clamping: pneumatic - Coolant system: Micro-spray for flow drilling, cooling emulsion - Spindle speed: 80 - 6000 rpm - Speed correction: 80 - 120 % - Drilling capacity in St60/Alu Ø: up to 18 / 20 mm - Thread cutting capacity: up to M14 / M16 - Position measuring system: rotary encoder - Positioning accuracy: 0.05 mm - Repeatability: 0.025 mm - Machining accuracy tolerance: ± 0.2 mm - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Noise emission: 79 dBA - Motor power: 15 kW - Electrical connection: 3x 400 V ± 5% / 50-60 Hz - Pre-fuse: max. 25 A - Power consumption: approx. 13 kVA - Control voltage: 24 V DC - Space requirement with safety fence: approx. 34 m² (11.4 x 3 m) - Machine weight with accessories: approx. 5000 kg

Condition: used, Year of construction: 2000, x-travel 22.000 mm y-travel 1.500 mm z-travel 3.000 mm control SIEMENS 840 D milling head -swivable 0,001/0,001 Grad milling head Universalfräskopf 45° Internal cooling system 20 bar Chip coveyor ja Tools changer 30 pos. coolant 1.100 l Tool taper DIN 69871A ISO 50 total power requirement 45 kW weight of the machine ca. 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Dcodoxvtf Nopfx Afnjc Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /INCLUDED Coolant System in Electrical Cabinet INCLUDED Machine Weight 68.000 Kg. Machine Colour RAL 7038 – 5012 Portable Handwheel INCLUDED

Condition: used, Year of construction: 1998, x-travel 4.300 mm y-travel 1.200 mm z-travel 1.500 mm control Heidenhein TNC 426 PB table-size 6.120 X 1.000 mm taper ISO ISO-50 Number of revolutions 20 - 3.000 rpm work speed 5.000 mm/min handwheel HEIDENHAIN HR-410 Dedpfxexvtgao Afnocc table weight 20.000 Kg Tools changer 40 fach/tools rapid traverse 12.000 mm/min weight of the machine ca. 28 t

Condition: good (used), Year of construction: 2010, functionality: fully functional, X 3,200mm, Y 2,100mm, Z 920mm, ATC 40 pos, BT50 10,000Rpm. Dedpfx Afjyglbxsnjcc weight ca 35.000kg, delivery April 2026