Used Cnc Vertical Milling Center for sale (26,439)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Bsdpfx Aotrhq Hsdtswn Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz Bwedpfx Aew Nklhjdton - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Bedpfsy N Du Dsx Adtown Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Bedpfx Aoy H Igredtswn Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available

Condition: used, Year of construction: 2019, chuck diameter 500 mm swing diameter over bed slide 700 mm control Siemens travel -x axis 630 mm travel -z axis 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. Bedpfjx Szlrox Adtewn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT

Condition: used, Year of construction: 2019, travel -x axis 900 mm travel -y axis 200 mm travel -z axis 800 mm B-axis swival range ° positioning accuracy C: 9 '' control SIEMENS number of spindle speeds 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315 Bodpsx Szmvefx Adtewn The machine is in very good condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PV315 | PV-315

Condition: like new (used), Year of construction: 1985, Parts shown by hand not come. Bwjdegw Shropfx Adten 4 axis not come with machine.

Condition: like new (used), Year of construction: 2002, Parts shown by hand not come Bwsdpsk It Utofx Adtjn

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Bwodpfsk Iugzex Adten

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Bjdpfx Adoquhbgstjwn Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card Bsdpfjw Ed U Njx Adtown - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, controller model: FANUC Series 31i-MODEL B, TECHNICAL DETAILS Turning length: 1,020 mm Turning diameter: 540 mm Swinging diameter over the machine bed: 750 mm Swinging diameter over the top slide: 540 mm Swinging diameter over the cross slide: 270 mm Travel range X-axis: 565 mm Travel range Y-axis: 170 mm Travel range Z-axis: 1,050 mm Rapid traverse rate X-axis: 36 m/min Rapid traverse rate Y-axis: 26 m/min Rapid traverse rate Z-axis: 36 m/min Power of the spindle motor: 22 W Spindle speed main spindle (max.): 5,000 rpm Spindle bore: 76 mm Spindle speed milling spindle (max.): 12,000 rpm Bar passage: 76 mm Bar diameter (max.): 65 mm Spindle nose: A2#6 Bwjdpfx Aey Tw Uljdtjn Spindle diameter: 110 mm MACHINE DETAILS Control system: FANUC Series 31i-MODEL B Chuck outer diameter: 210 mm Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,525 x 2,805 mm Total weight: 12,000 kg Operating hours: 8,977 h EQUIPMENT Documentation/Manual

Condition: excellent (used), Year of construction: 2022, Swiss CNC Chucker-Convertible Sliding Headstock Lathe W/ "B" Axis Bwodpfx Aeyq S Utsdtjn

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, milling speed 4,500rpm, milling power10Kw, sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Y axis -51/+51mm, Bwedjzaz Uzspfx Adtsn 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit.

Condition: used, Year of construction: 2000, max swing 700 mm, X/Y 255/520 mm, 12-position upper tool turret and 8-position lower tool turret with driven tools, measuring head, tailstock, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 15 t Bwedsym Sx Depfx Adtjn

Condition: like new (used), Year of construction: 2018, Swing over bed 641mm, 229mm max. machining diameter, 356mm cutting length, 6000rpm spindle, 44mm bar capacity, Bwedpsy U Hpbofx Adton 12 station turret, 11.2kW spindle motor, +/-50mm Y axis, C axis & Milling, HAAS control, 3 jaw chuck, coolant, Tool Setter,

Condition: good (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Purchase price EUR 1.550.000 Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Front diameter: Bearing 110mm Interface HSK100/C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Bsdpfx Aozaz Egjdtswn Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: used, Year of construction: 2002, travel -x axis 3.000 mm travel -y axis 560 mm travel -z axis 720 mm control Siemens - 840D number of spindle speeds 18.000 U/min numbers of positions in the tool changer 100 Bwedpfoy A Tb Hex Adtsn tool taper HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear The machine has exclusively processed aluminum and is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear

Condition: used, Year of construction: 2002, travel -x axis 3.000 mm travel -y axis 560 mm travel -z axis 720 mm control Siemens - 840D number of spindle speeds 18.000 U/min numbers of positions in the tool changer 100 tool taper HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear The machine has exclusively processed aluminum and is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear Bjdey A Tbtepfx Adtown

Condition: excellent (used), Year of construction: 2012, operating hours: 14,901 h, functionality: fully functional, DMG MORI / GILDEMEISTER CTX beta 1250 TC 4A CNC turning/milling center DMG CTX beta 1250 TC 4A, manufactured in 2012. The machine is equipped with a Siemens 840D / ShopTurn 3G control system and features a main and counter spindle, B-axis, Y-axis, upper milling spindle, and a lower turret. Current operating hours are approximately 14,901 hours, and current spindle hours are approximately 5,000 hours. The machine is still connected to the utilities and can be inspected by appointment. Condition: Exceptionally Good / Superbly Maintained Technical Specifications Process: Turning / Milling / Complete Machining Machine Type: CTX beta 1250 TC 4A Year of Manufacture: 2012 Weight: approx. 16,000 kg Power: 85 kVA Control System: Siemens 840D / ShopTurn 3G Main Spindle / Counter Spindle: 1 x FNC 250 each, up to 5,000 rpm Main Spindle: Hainbuch SpannTop nova Modular 80 HS Internal Clamping Device: Diameter 77 mm GS Partial Internal Clamping Device: Diameter 67 mm x 700 mm Coolant System Pressure: 8 / 20 / 40 / 80 bar Short Bar Loader Magazine: IRCO ILS-RBK 100/16 Upper Milling Spindle: HSK-63A, 24-position disc magazine Travel Ranges Upper Unit: B-axis +/-110 degrees, Y-axis +/-100 mm, X-axis 450 mm, Z-axis 1,200 mm Lower Turret: VDI 40, 12 tool positions, X-axis 195 mm, Z-axis 1,200 mm Additional: Turret collet chuck SMW SLU-X-2-ZS 8-101 mm Footprint: approx. 9,200 x 2,600 mm including exhaust filter system, chip conveyor, and bar storage Bjdpfjzbg Txjx Adtswn Video recordings + extensive photo collection available upon request via WhatsApp.

Condition: good (used), Year of construction: 2006, turning length: 1,000 mm, Technical Data – QTN-250M (Turning Length 1000 mm) Chuck size: 10 inches Maximum swing diameter: 677.5 mm Standard turning diameter: 430 mm Maximum machining diameter: 633 mm Maximum machining area: 677 mm Maximum turning length (Z-axis): 1000 mm Bar capacity: 77 mm Spindle nose: A2-8 Main spindle speed: 30–4000 rpm Main spindle motor power (30-minute rating): 25 kW (36 hp) Maximum torque of main spindle: 355 Nm (36.0 kgf·m) Tailstock: • Quill type: Morse taper No. 5 • Maximum travel of tailstock: 1050 mm • Maximum thrust: 12 kN (1200 kgf) Tool turret: • 12 tool stations • Tool sizes: • External turning tool: Ø40 mm • Internal turning tool: Ø20 mm • Milling cutter/drill: Ø20 mm • Milling/threading tool: M12 Milling spindle: • Speed: 25–4500 rpm (optional 6000 rpm) • Motor power: 5.5 kW (7.5 hp) • Maximum torque: 35 Nm (3.6 kgf·m) Bwedpfx Adowfynfetsn Coolant capacity: 160 liters Machine dimensions: • Width: 1780 mm • Overall height: 2533 mm • Footprint: approx. 4.51 m² • Machine weight: approx. 5200 kg

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle Bwjdpevyli Eefx Adten very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders (see picture) 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted. Complete battery exchange on 22.12.2025

Condition: good (used), Year of construction: 2023, CNC multi-axis turning center Manufacturer: Hyundai WIA Type: LM1800TTSY Control: Siemens 840D Shopturn with 3D simulation Year of construction: 2023 Technical data: Incline bed design with box guide in X/Y axis, Z-axis with linear guide Counter spindle and twin turret system Travel distances: X/X1: 165 / 195 mm Z1/Z2: 700 / 720 mm ZB: 668 mm Y: 100 mm Rapid traverse rates: X/Y/Z: 20 / 7.5 / 40 m/min Max. turning diameter: 230 mm Max. turning length: 673 mm Spindle nose: A2-6 Spindle bore / bar capacity: 76 / 65 mm Spindle speed: 5,000 rpm (both spindles) Drive power: 2x 22 / 11 kW Turret & milling unit: 2 turrets each with 12 stations (optional 24) System: BMT55P Milling drive: Speed: 5,000 rpm Power: 5.5 / 1.1 kW Equipment: Automatic measuring arm Coolant tank 270 liters Bedpfxey Hfrlo Adtjwn Direct path measuring system (X1/X2, Z1/Z2, Y) Temperature compensation for coolant (with air conditioning unit) High-pressure cooling 20 bar Chip conveyor (belt conveyor) Siemens network extension Bar loader interface Extensions & accessories Software & electrical: ShopTurn with 3D simulation Machine transformer Measuring & automation technology: Automatic Q-Setter Renishaw Linear positioning sensor (for main and counter spindle) Workpiece handling: Part catcher for main spindle Part catcher for counter spindle with belt discharge Workpiece ejector Clamping technology: Spanntop mini from Hainbuch Main spindle (AX puller size 65) Counter spindle (AX fixed size 65) Peripherals: Bar loader magazine Sprint 565 S2 from LNS For bars up to 3,000 mm length Diameter: 5 – 65 mm Reduction sleeve set (various diameters) Extraction system Purchase price in 2023: 330,000 Euros The machine has been little used and is in very good condition.

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm Bwjdpfxewp D Nbj Adton toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: used, Year of construction: 1990, Technical details: turning diameter: 445 mm turning length: 2000 mm turning diameter over bed slide: 660 spindle bore: 65 mm spindle speeds:: 16 - 3150 U/min. rapid motion - x-axis: 10 mm/min rapid traverse Z-axis: 15 m/min total power requirement: 34 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 6 x 2,5 x 2,2 m with CNC Control TX 8 D C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm Bwodpfxew I R Ndo Adtsn tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment *