CNC vertical milling center

MORI SEIKI MV

Condition: ready for operation (used), Year of construction: 1986, travel distance X-axis: 560 mm, controller manufacturer: FANUC, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis MORI SEIKI MV JUNIOR was manufactured in 1986. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 460 mm. The machine includes a table size of 900 x 450 mm and a maximum table load of approximately 300 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI MV JUNIOR vertical machining centre we have for sale. Contact us for further details. • X-Axis Travel: 560 mm (22 in) Fgsds Aifrzepfx Am Dsi • Y-Axis Travel: 410 mm (16.1 in) • Z-Axis Travel: 460 mm (18.1 in) • Table Dimensions: 900 x 450 mm (35.4 x 17.7 in) • Max. Table Load: Approx. 300 kg (660 lbs) • Spindle Taper: BT 40 / CAT 40 • Spindle Speed: 60 - 8000 rpm • Distance Spindle Nose to Table: 150 - 610 mm (5.9 - 24 in) • Voltage: 200/220 V, 3-Phase • Machine Dimensions (L x W x H): Approx. 2.3 x 1.8 x 2.4 m Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Fgsdpfx Amexfka Nj Dei Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600

Condition: ready for operation (used), Year of construction: 1992, travel distance X-axis: 800 mm, controller manufacturer: FANUC, spindle speed (max.): 8,000 rpm, number of axes: 4, This 4-axis MORI SEIKI MV 40 was manufactured in 1992. It features an X-axis travel of approximately 800 mm, Y-axis travel of 410 - 450 mm, and Z-axis travel of 510 mm. The machine includes a table size of approximately 1100 x 450 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI MV 40 vertical machining centre we have for sale. Contact us for further details. • Additional Equipment: Nikken 4th-axis rotary table divider, external tooling cart with toolholders Fjdpfo Aifrrjx Am Dogi • X-Axis Travel: Approx. 800 mm • Y-Axis Travel: Approx. 410 mm • Z-Axis Travel: Approx. 510 mm • Table Size: Approx. 1100 x 450 mm • Max. Table Load: Approx. 700 kg • Spindle Taper: BT 40 • Spindle Motor Power: Approx. 7.5 kW / 10 HP • Tool Changer Capacity: 30 stations Technical Specification Taper Size BT 40

Condition: good (used), MORI SEIKI MV-65/50 – Heavy-Duty CNC Vertical Machining Center Technical specifications in English – based on published MV-65/50 machine configurations. Machine designed for large and heavy workpieces, with a rigid construction, large working table and powerful 50-taper spindle. Technical specification Manufacturer Mori Seiki, Japan Model MV-65/50 Machine type Heavy-Duty Vertical Machining Center X-axis travel 1,600 mm Y-axis travel 650 mm Z-axis travel 650 mm Table dimensions 1,700 × 650 mm Maximum table load 2,000 kg Spindle taper BT50 / CAT50, Spindle speed 6,000 RPM, Spindle motor power Approx. 22 kW, Automatic tool changer 30 tools, CNC control Mori Seiki MSC-516 / Fanuc-based, depending on version Machine construction Heavy-duty rigid box-way design Fgedpfx Ae Aivg Ejm Doi Machine weight Approx. 13,300–15,500 kg Machine dimensions Approx. 4,300 × 3,700 × 3,100 mm,

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Fgjdpfx Amjv T Nqaj Doi Electrical cabinet: 2200 mm

Condition: used, Control: MSC-516. Accessories are available and included in the offer. The exact scope of delivery is yet to be clarified. Inspection possible by prior arrangement. Fgedpfxo Ah Tx Nj Am Doi

Condition: used, Year of construction: 1994, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 5,600 kg, spindle speed (max.): 8,000 rpm, Fanuc rotary table, Nikken BT40-8000 rpm spindle Tool changer Tool changer arm, requires repair Travel: 800 x 400 x 400 mm Fgjdpfxo Abgfks Am Dji

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM Fodpsyuqacefx Am Djgi SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: used, Mori Seiki MV45/45 machining center with Fanuc 11M control, travels X 820 / Y 555 / Z 550 mm, 4,500 rpm spindle (7.5 / 5.5 kW, BT 45) and Kitagawa 4th axis for simultaneous 4-axis machining. Professional through-spindle coolant retrofit by Deuschle Spindelservice — rotary union through the pull stud, hydraulic tool clamping with pressure intensifier, dedicated 15 bar pump switched via M50 — plus box guideways for exceptional rigidity, 2 mechanical gear stages delivering 200 Nm torque in low gear, and approximately 75 BT 45 tool holders (all with through-coolant passage) included. Box-guideway construction and 4-axis simultaneous capability make this a stable, versatile workhorse for complex parts. CNC CONTROL Controller: Fanuc 11M AXES Number of controlled axes: 4 Number of simultaneous axes: 4 X-axis travel mm: 820 Y-axis travel mm: 555 Z-axis travel mm: 550 4th axis / rotary table: Kitagawa SPINDLE Max. spindle speed rpm: 4.500 Spindle power kW (S1/S6): 7,5 / 5,5 Spindle torque Nm: 200 Spindle taper / interface: BT 45 Gearbox stages / speed ranges rpm: 2 Fjdpfxezy Svuj Am Degi COOLING Coolant through spindle bar: 15 EQUIPMENT & OPTIONS • Box guideways (flat slideways) — very rigid, stable machine • 4-axis simultaneous: Kitagawa 4th-axis rotary unit, hydraulically clamped, fully integrated in the control • Spindle with 2 mechanical gear stages — high torque, 200 Nm in low gear • Through-spindle coolant (IKZ) retrofitted by Deuschle: rotary union through the pull stud, hydraulic clamping/release with pressure intensifier, own 15 bar pump switched via M50 • Chip conveyor at the front, discharging to the right • Approx. 75 BT 45 tool holders included, all with through-coolant passage, plus about 20 pull studs • 4th axis (rotary table)

Condition: used, Year of construction: 1983, functionality: limited functionality, overall weight: 6,500 kg, The machine can be inspected by appointment. Delivery is the customer's responsibility, but we can assist with packing and loading if required. Fgodpfozy Efijx Am Dsi

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m Fgedswwl I Iopfx Am Dei The guides have been outdated 10 years ago

Condition: used, Year of construction: 1988, Technical details: x-travel: 800 mm Fjdpfxsy S T T Uo Am Djgi y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Accerories 2 Chip conveyor, rear side disposal Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1764, controller manufacturer: Fanuc, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Control: Fanuc EQUIPMENT Fgjdpoy Sluqjfx Am Dji Accessories as shown in the pictures

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward Fedpfov D Nxljx Am Dsgi 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: used, Year of construction: 1986, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm total power requirement: 20 kW weight of the machine ca.: 8 t Vertical Processing Centre Fgjdpewvblaofx Am Dji 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough. *