Used Qas 30 for sale (24,765)

Condition: good (used), functionality: fully functional, Year of construction: 1916, Binderberger horizontal log splitter 30 t Crsdjyglm Uspfx Aktoi

Year of construction: 2015, condition: used, 30" Russell Finex Vibratory Sieve | Model: 30530 Stainless Steel Complete with Vibrasonic 2000 Controller & 2 stainless steel wagons of spare screens Manufacturer: Russell Finex Equipment Type: Vibratory Sieve / Screening Machine Model: 30530 Crsdpfx As Ahrcwsktoi Screen Diameter: 30" (762 mm) Number of Decks: 3 Construction: Stainless Steel (S/S) Condition: Used

Condition: excellent (used), fuel type: diesel, For sale, two Atlas Copco QAS 18 diesel generators. Both generators feature a compact design and are suitable for professional use on construction sites, in workshops, and at other locations where a mobile power supply is required. Atlas Copco QAS 18 Diesel generator. 400 V connection. 230 V connection. Multiple power connections. Emergency stop. Analog meters for voltage, amperage, and frequency. Integrated fuel tank. Enclosed housing. Both generators are used and show signs of wear consistent with their age. They can be sold separately or together. Price per unit, €3,750 net. Price for both together, €7,500 net. Videos available upon request. Viewing and testing are possible at our location in Deventer. Haverhoek Trucks B.V. Zweedsestraat 6. 7418 BG Deventer. The Netherlands. = Further information = Year of manufacture: June 1997 Construction year: 1997 Model year: 1997 Intended use: Construction Mains voltage: 400 V Generator power: 10 kVA CE marking: yes Technical condition: very good Cjdpfx Akjz Dkqpotsri Optical condition: good

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Crjdpfxoy Rnqfj Aktoi Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Equipped with: Retriever Shuttle Table Chip Conveyor Auto Load Grayco Lube AB Panelview Crodpfx Aertrzaektji Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,676 h, functionality: fully functional, HURCO VMX 30 – CNC Vertical Machining Center with LEHMANN Dividing Table Manufacturer: HURCO Model: VMX 30 Year of Manufacture: 03/2002 Control System: HURCO Ultimax Machine Type: CNC Vertical Machining Center Technical Data X-axis: 760 mm Y-axis: 510 mm Z-axis: 610 mm Rapid Traverse X/Y/Z: 30/30/20 m/min Table Dimensions: 1,020 × 510 mm T-slots: 5 × 18 mm Crjdpfe Agwx Nsx Aktji T-slot spacing: 100 mm Maximum Table Load: approx. 1,000 kg Spindle Speed: up to 10,000 rpm Spindle Drive Power: approx. 11 kW Tool Holder: SK40 Automatic Tool Changer 24 tool positions Tool holder SK40 HURCO Ultimax Dual-screen control system Special equipment CNC-controlled dividing table from LEHMANN Fully integrated into the HURCO control system Control directly via the CNC control system Fully functional Machine Dimensions and Weight Machine Weight: approx. 4,700 kg Machine Height: approx. 2,775 mm Footprint: approx. 3,870 × 4,170 mm including work area Condition and Scope of Delivery The machine is in used condition, commensurate with its year of manufacture, and shows visible signs of wear. Technically, the machine is fully functional. All existing machine functions, as well as the integrated LEHMANN dividing table, are functioning perfectly. The machine is sold including the LEHMANN dividing table. Not included in the scope of delivery: The clamping devices and clamping elements visible in the pictures Tools and tool holders The machine is suitable for single-part production as well as for small and medium-sized series. The machine can be viewed by appointment. The machine is expected to remain powered and available for demonstration until mid-calendar week 46/2026 (approx. November 11, 2026). An inspection and functional test while powered is possible within this period by arrangement. All technical specifications are without guarantee. Subject to prior sale.

Condition: like new (used), Year of construction: 2016, AL-KO POWER UNIT 300 incl. briquetting press Alko Type 300P-BP 30-50 Suction nozzle 300 mm Motor rated power 7.5 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow rate 6,000 m3/h Rated volume flow rate* 5,089 m3/h Negative pressure at rated volume 2,587 Pa Filter area 30 m2 Pre-separator integrated Extinguishing system integrated Control for 8 machines Chip collection volume (net/gross) briquetting press 900 liters Sound pressure level 71 dB(A) Dimensions (L / W / H) in mm 3,000 x 1,361 x 2,817 Briquet diameter 50 mm Net weight without packaging 1,570 Absolutely new condition, from a school workshop Credpfxo Ahw T De Aktei

Condition: used, Year of construction: 2020, operating hours: 5,945 h,

Condition: used, axle configuration: 3 axles, first registration: 10/2005, color: other, Year of construction: 2005 Empty weight: 3.750 kg Crjdpoucxu Iofx Aktoi Axle 1: left 12 mm right 7 mm Axle 2: left 4 mm right 6 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Condition: used, machine/vehicle number: 008701, Max working length: 2740 mm Max working width: 1240 mm Membrane: yes No of positions for the rolls: 2 No of work tables: 1 Credpjzq Urtsfx Aktji

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, machine/vehicle number: L2TAF0101, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 30 kVA, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, total height: 2,500 mm, total length: 3,000 mm, total width: 2,400 mm, table width: 450 mm, table length: 860 mm, overall weight: 4,000 kg, spindle speed (max.): 12,000 rpm, input voltage: 400 V, input frequency: 50 Hz, Equipment: chip conveyor, documentation/manual, LEADWELL V-30 iV CNC Vertical Machining Center - Tool holder: BT 40 - Table with three T-slots - Includes documentation and chip conveyor The machine is equipped with a tool changer, including the tool holders from the changer. FCA D-94227 Zwiesel – loaded onto a truck. Cjdpfx Ako Afuu Ijtjri

Condition: used, Year of construction: 2023, TEKA welding fume extraction system Crsdpfx Ae Ah Drvoktji Model VACCUBE 30 used Year of manufacture: 2023 Power: 3.0 kW Current consumption: 7.2 A Connection voltage: 400 V / 50 Hz Max. capacity: 320 m³/h Max. pressure: 27000 PA Filter area: 8.16 m² PTFE Sound level: 68 d(B)A Weight: 125 kg

Condition: used, Year of construction: 2015, Length 12000 mm Width 9000 mm Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. ----- Codpfo Ahkkhjx Aktjri Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: ----- Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: ----- Electrical system control for paint mist extraction...

Condition: used, Year of construction: 1978, 10 MVA oil transformer, TuR Dresden, 30 / 10.5 kV with tap changer 19 steps, switching group YNyn0, with expander, Buchholz relay, dehumidifier, fan, dial thermometer, year of manufacture 1978 Cjdpfx Ajt Akl Hjktjri

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 30,000 kg, Equipment: foot remote control, 30 tons lifting capacity, self-centering, new 380V Hand and foot remote control Rotational speed 100 - 1000 mm/min. Crodpfx Aowrpfgjktei Diameter range 600-4500mm Drive wheel diameter 350mm x width 180 Material heat-resistant PU, non-slip Dimensions: 2350 x1460 x 1050 Double drive synchronous

Condition: like new (used), Year of construction: 2026, machine/vehicle number: Pro.b 301365530.165, functionality: fully functional, pressing force: 30 t, stroke length: 535 mm, number of cylinders: 6, workpiece length (max.): 3,000 mm, cylinder diameter: 60 mm, No minimum price – guaranteed sale to the highest bidder! The machine is new and has no operating hours! TECHNICAL DETAILS Press drive: Hydraulic Total pressure: 30 t Number of cylinders: 6 Cylinder diameter: 60 mm Plate material: Steel Workpiece length: max. 3,000 mm Workpiece width: max. 1,300 mm Workpiece height: max. 535 mm Codpfxe Af Hide Akteri Total stroke: 535 mm Number of working areas: 1 MACHINE DETAILS Operating hours: 0 h Voltage: 400 V Current consumption: 5 A Fuse rating: 16 A Main motor power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,700 x 1,950 mm Unladen weight: 2,000 kg Number of transport packages: 1 EQUIPMENT Documentation CE certificate CE marking

Condition: as good as new (ex-display), Year of construction: 2024, bore capacity in steel (diameter) 32.0 mm throat 230 mm bore stroke 120 mm morse taper 3 MK table: 400 x 320 mm turning speeds 105 - 1725 U/min total power requirement 1.2 kW weight 245 kg range L-W-H 470 x 810 x 1710 mm Furnishing: - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display - Table height adjustment via rack and crank - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing scope of delivery - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light Credjw U U N Iopfx Aktoi - Height-adjustable protective cover

Condition: used, Year of construction: 2023, ---- Demonstration unit A total of 3 units available: AC generator QAS30 KD S5 50Hz 400V3PH EQ: 100583713 Serial No.: ESF373329 Year of manufacture: 2023 AC generator QAS30 KD S5 50Hz 400V3PH Crsdpfx Ajzkz Dijktoi EQ: 100583714 Serial No.: ESF373330 Year of manufacture: 2023 Equipment: Language pack 3 EN+DE+NL+FR+IT 5-pole sockets 63 A ELP-B 32?16 A + DS DS-RIM 3P 16A Insulation monitoring relay Battery disconnect switch Operating manual, German

Condition: used, total length: 3,500 mm, total width: 1,500 mm, total height: 1,800 mm, Year of manufacture: 2008 Colour: White Empty weight: 1.400 kg - Year: 2008 - CE marking present: Yes - Serial number: 0040108 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Total stroke [mm]: 500 - Number of work zones [pcs]: 1500 - Number of levels [pcs]: 1 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 55 - Total pressure [Ton]: 30 - Voltage [V]: 400 - Current consumption [A]: 3.6 - Fuse [A]: 16 - Power [kW]: 75.0 - Transport dimensions: 3500mm x 1500mm x 1800mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Credpe Ahyp Ejfx Aktoi VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 70 t, stroke length: 400 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, cylinder diameter: 70 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Total pressure: 70 t Working pressure: 2 kg/cm² Total stroke: 400 mm Number of working stations: 1 Number of levels: 1 Plate material: Mounted plate Number of cylinders: 6 Cylinder diameter: 70 mm Codpfx Ae Af Hn Hjktjri Workpiece length: max. 3,000 mm Workpiece width: max. 1,300 mm Workpiece height: max. 400 mm Heating type: Oil-heated Temperature: max. 120 °C MACHINE DETAILS Main motor power: 2.1 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,100 x 2,050 mm Unladen weight: 4,020 kg Number of transport packages: 1 EQUIPMENT Documentation Heating boiler CE marking CE certificate

Condition: used, functionality: fully functional, Year of construction: 2007, Used 3-meter guillotine shears from HM Type: MPS 30 25 Capacity: 3100 x 2.5 mm (steel) Mechanically driven (40 strokes/min) Adjustable back gauge Year of manufacture: 2007 Crodpfxs Ahgtxo Aktji

Condition: used, functionality: fully functional, Year of construction: 2014, working width: 3,000 mm, distance between stands: 2,550 mm, back gauge: 1,000 mm, pressing force: 170 t, Equipment: documentation/manual, lower tooling, upper tooling, EHT MultiPress 170-30 Year of manufacture: 2014 Crodpfxevhcp So Aktei Pressing force: 170 tons Bending length: 3,050 mm Frame opening: 2,550 mm Top clamp: EHT 26 mm Bottom clamp: WILA 13 mm 5-axis rear gauge 1x EHT upper tool, 3,000 mm, sectional (see images) 1x EHT lower tool, 3,000 mm, sectional (see images) Next safety inspection due: 02/2026 Operating hours: approx. 22,000 Cycles: approx. 1,200,000 Price: net, ex works

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Equippment: 1 Grip feeder system right hand side Credpfxo Aaq Ute Aktoi 1 Eccentricpress 70 kN 5 Standard slide units 1 Control shaft Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: good (used), Year of construction: 2008, Ref. -No.: 10533 Manufacturer: COORD3 Type: MCT Star Ligth 30 20 20 Year of construction: 2008 Type of control: CNC-Steuerung Control: CNC Storage location: Halberstadt Country of origin: Italy Machine weight: 5600 kg X-Axis: 3000 mm Y-Axis: 1500 mm Z-Axis: 1000 mm CMM Pressure: 0,42 MPa Further information: The machine can be viewed under power by arrangement. Codo Ahmuzopfx Aktori

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, operating hours: 3,808 h, load capacity: 3,000 kg, lifting height: 3,400 mm, fuel type: gas, mast type: duplex, fork length: 1,800 mm, Equipment: head guard, pallet forks, we are offering: FRONT FORKLIFT, FORKLIFT, GAS FORKLIFT, Manufacturer: CLARK Type: GPM 30 L Load capacity 3000 kg Lifting height 3400 cm Fork length 180 cm, Year of manufacture 1988 Hours: 3808 Height 3000 mm For further details see photos Codevx Ubzspfx Aktori Offer is aimed at tradespeople, dealers, public and church institutions! We are offering items from various acquisitions, which we describe as best as possible and provide meaningful photos. No further information about the item can be provided. Due to time constraints, we can only offer answers to this article if you provide us with a telephone number with your inquiry. This offer is used goods unless expressly described. All offers from stock 47441 Moers. Other industrial trucks in stock!! We offer the opportunity to view items on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by arranging an appointment by telephone. If required, the item can be taken away immediately. All dimensions are approximate You can also find other offers from catering, storage technology, trolleys, etc. in our shop The following applies to all offers: All information is subject to change / photos are similar Legal information