Facing and Centering Machine

UMA - SZM SZM 100/1000

Condition: used, machine/vehicle number: 1379A, mileage: 1,638 km, power: 179 kW (243.37 HP), first registration: 11/1986, fuel type: diesel, overall weight: 15,322 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, parking heater, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a really good condition directly from the Army , Well maintained and maintained, the body is in a super good condition (vehicle from the reserve) , The M944A1 is equipped with: All-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body has the dimensions: L/W/H 5550 / 2200 / 2200.e L/W/H 5550 / 2220 / 1910mm inside, equipment of the body: lathe, tool cabinet with drawers, grinding stand, welding unit, permanently installed power generator 110 Volt 31KVA driven by vehicle engine (Cummins with 105 operating hours) via auxiliary drive, 2-piston compressor with compressed air tank, air connections in the body, trolley, loader, impact wrench large and small, grinding witch, air connections in the body, trolley, loading device, impact wrench large and small, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch. and small, grinding witch, magnetic drill, vice, large auxiliary heating and ventilation, many sockets, interior lighting, both sides and the rear of the body can be opened, the km are miles, driving license class 2 (truck), tire size 14.00R20 (very good condition) tubeless, top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M944A1 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timer AM Generalist also already for conversion as a motorhome and long-distance traveler, . All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Gujdpfxsqx Sxaj An Eji

Condition: excellent (used), Brand: DMTG DALIAN Gsdpfsu U Htcox An Eeui Model: CKE 6180 Z Cnc : FAGOR 8055 iT Turning diameter : 800 mm Turning length: 2.000 mm Center height over bed: 400 mm Face slide travel: 420 mm Longitudinal travel : 1.835 mm Spindle bore: 100 mm Spindle speeds: 40-1000 rpm Feed in X : 0-4000 m/min Feed range Z direction : 0-8000 m/ min Turret : 4 estaciones Chuck diameter 4 jaw: 400 mm Quill stroke: 260 mm Voltage : 400 v Total power requirement: 18,5 kw Machine dimensions : 4.500 x 2.000 x 1.800 mm

Condition: excellent (used), Year of construction: 2017, CNC Turning and Milling Center DMG Mori CTX gamma 1250 CT (Year 2017) Available from March 2027 Base Machine - CTX gamma 1250 CT with turning length 1,250 mm - Main spindle as integrated spindle motor (ISM102) - Drive power: 35/45 kW (100/40% duty cycle) - Speed: 4,000 rpm - Partial hollow clamping device (hydraulic) - Draw tube inner diameter: 104 mm, depth: 848 mm - C-axis and hydraulic spindle brake - Chuck flushing device on main spindle (external) - Upper cross slide with turning/milling spindle as motor spindle: - Speed: max. 12,000 rpm - Power: 27 / 36 kW (100% / 40% duty cycle, 2 min) - Torque: 160 / 220 Nm (100% / 40% duty cycle, 2 min) - Hydraulic clamping during turning - Tool interface: HSK-A 63 DIN 69893 - Y-axis: ±210 mm - B-axis: ±120°, torque motor - Tool disc magazine: 36 positions - NC tailstock with supported, hydraulically movable quill and fixed center - Absolute, direct linear measurement systems in X-, Y-, and Z1-axis - Coolant pump: 6 bar, 20 l/min, fabric filter, filter fineness 100 µm - Cooling system for spindle motors, motor unit, turning/milling spindle, and B-axis torque motor - Control: CELOS® with Siemens 840D sl Operate and ShopTurn 3G Control & Operation - CELOS® with Siemens 840D solutionline Operate including 21.5" ERGOline® Control with multi-touch display - APPs for simplified machine operation - Comprehensive management, documentation, and visualization of order, process, and machine data - Networking with CAD/CAM and compatibility with PPS/ERP Enhanced Equipment - Tool chain magazine: 120 positions (instead of 36-position disc magazine) - Tool interface: HSK-A 63 DIN 69893 - Mechanical oil mist separator - Capacity: 1,100 m³/h, filter class H13 - 4-color signal lamp - "BLACK" design variant - Work area door, front panel, and front window frame in deep black - Tropical package for ambient temperatures up to 40 °C - Includes control cabinet cooling unit - Energy measuring device - 3D data model of machining area (STEP & IGES) – supplied on CD - Electrical Profibus interface for 6-axis robot - (Only with Siemens control) Special Equipment / Options - Grinding preparation (using CBN cup tools), consisting of: - Shortened grease lubrication cycle - Plug sealing in draw tube - Flushing of Z1/X1 telescopes during machining - HT 2 control hand unit - Jog mode, creep mode, and incremental adjustment via handwheel - Integrated emergency stop function and feed override - Tailstock with increased feed force (20 kN) Hydraulically actuated double-piston chuck Forkardt OZRDI 150, consisting of: - Integrated pressure converter - Piston rod clamping - Stroke monitoring unit with switching cone for clamping piston Ø150 mm - Maintenance-free 5-channel oil supply - Safety valve system for clamping piston Ø150 mm Condition The machine has been regularly serviced by DMG Mori customer service and is in technically flawless condition. An inspection under power or during ongoing production is possible. Dimensions & Weight - Machine: approx. 580 × 280 × 285 cm, approx. 20,000 kg - Chip conveyor: approx. 670 × 125 × 160 cm, approx. 1,000 kg - Total weight including accessories: approx. 22,605 kg - Number of packages: 11 - Loading meters: approx. 21 Godsy A Hq Ispfx An Eoui The complete equipment and further technical data are available in the documentation, which we are happy to provide upon request. Disassembly, removal, shipping, and recommissioning can be organized.

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW Gjdpsyuqacefx An Ejui TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Gsdpfxov A Uw Ds An Eeui Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, Year of construction: 2001, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI30 - Overhauled 2023 - Year of construction 2001 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min Gjdpfx Asvf I Dien Esui - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 6.8 Nm - DC motor X-axis power: 3.4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2300 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Year of construction: 1994, condition: excellent (used), machine/vehicle number: 04.2398, Manufacturer: Arthur Klink Type: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of construction: overhauled by manufacturer 1994 Gujdpfxjgyd T Eo An Eei weight: 3700kg tractive force: 10.000kg (100kN) max. stroke: 1500mm max. workpiece diameter: Ø 500mm clearing speed: infinitely variable from 1m/min to 6m/min return speed: stepless adjustable up to 20m/min power supply: 400V / 50Hz

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control SIEMENS - 840 D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min feed range 1 - 3.000 mm/min size of pallet 1.168 mm numbers of pallets 2 main drive 55 kW Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. The machine video from the production plant will be shared on request. Gujdpfxjvp Shgj An Esi The machine is in very good condition and was in operation at an aviation company until recently. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Guodpfsuz If Nox An Eji Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach. Guodpfetmqi Dsx An Esi