Used Cnc Vertical Machining Center for sale (69,254)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Technical Information for Mazak Corporation Mazak VTC-300C II: Hnolhey St E Rocdwwel Model: Mazak VTC-300C II Machine type: Vertical CNC Machining Center Year of manufacture: 2003 Serial number: 162107 Accessories: Chip conveyor included Connected load: 28 kW Typical technical data for the Mazak VTC-300C II: Control: Mazatrol Fusion 640M / Mazatrol PC Fusion CNC Travel distances: X-axis: approx. 1,740 mm, Y-axis: approx. 760 mm, Z-axis: approx. 660 mm Table size: approx. 2,000 × 760 mm Table load capacity: up to approx. 1,400–1,500 kg Spindle taper: CAT 40 / BT40 Spindle speed: typically 10,000 rpm Main spindle power: approx. 18.5–22 kW Tool changer: 30 positions Rapid traverse: approx. 36 m/min Coolant system: included Machine weight: approx. 11,000–13,000 kg The machine is part of Mazak’s large VTC series and is particularly suited for: Large aluminum parts Steel machining Automotive production Fixture and series manufacturing

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions Holhcdwjtrhq Hswsnl - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door Hjlhcdow Nklhewwenl - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: not inspected (used), Year of construction: 2003, ● Delivery terms: Free on truck (FOT) ● Location: 42855 Remscheid ● Availability: By arrangement ● Payment terms: Advance payment by bank transfer ● Internal number: KL3 ● Collection: Collection of the machine is scheduled for calendar week 22. The exact pickup date will be coordinated and specified by us. Technical specifications: Working area / axes: Table working area (X): 2,000 mm Table working area (Y): 760 mm X-axis travel: 1,740 mm Y-axis travel: 760 mm (+250 mm for ATC) Z-axis travel: 660 mm Distance spindle nose to table surface: min. 180 / max. 840 mm Hnjlhey R Swpscdwwel Distance spindle center to column front: 808 mm Table: Table size: 2,000 x 760 mm Max. table load: 9,810 N (1,000 kg) T-slots: 5 pcs T-slot width: 18 mm T-slot spacing: 125 mm Distance machine base to table surface: 825 mm Max. table capacity: 13,730 N (1,400 kg) Spindle: Speed range: 40 – 12,000 rpm Feed: Rapid traverse: 36,000 mm/min Cutting feedrate: 1 – 8,000 mm/min Scope of delivery: ● Existing manuals (completeness not guaranteed) Note: The clamping devices and vises visible on the machine are not included in the scope of delivery. The tool in the spindle is also not included. Any external machine accessories shown around the machine are also not part of the delivery. Dimensions & weights: ● Installation dimensions L x W x H (approx.): 5,500 x 3,450 x 3,005 mm ● Weight (approx.): 11,500 kg Additional notes: ► Transport to the destination can be offered upon request ► The quoted price is net, plus VAT ► The item is sold excluding any warranty ► Technical data not guaranteed ► Subject to prior sale ❗ Sale exclusively to business customers ❗

Condition: not inspected (used), Year of construction: 2006, machine/vehicle number: 182926, ● Delivery terms: Free loaded on truck ● Location: 42855 Remscheid ● Availability: By arrangement ● Payment terms: Advance payment by bank transfer ● Internal No.: KL2 ● Collection: The collection of the machine is scheduled for calendar week 22. The exact collection date will be coordinated and specified by us. Technical Data: Working Range / Axes: Table working area (right/left): 2,000 mm Table working area (front/back): 760 mm X-axis (saddle travel): 1,740 mm Y-axis (column travel): 760 mm (+250 mm for ATC) Z-axis (spindle head): 660 mm Distance spindle end to table surface: 180 – 840 mm Distance spindle center to column front: 808 mm Table: Table size: 2,000 x 760 mm T-slots: 5 units T-slot width: 18 mm T-slot spacing: 125 mm Max. table load: 1,400 kg Distance machine base to table surface: 825 mm Spindle: Spindle mount: 7/24 taper, No. 40 Speed range: 40 – 12,000 rpm Feed: Rapid traverse: 36,000 mm/min Cutting feed: 1 – 8,000 mm/min Tool Magazine: Tool positions: 30 Hnjlhsy R Suzocdwwel Scope of supply: ● Existing manuals (completeness not guaranteed) Dimensions & Weights: ● Installation dimensions L x W x H approx.: 5000 x 3450 x 3300 mm ● Weight approx.: 11,500 kg Additional Information: ►Transport to the destination can be offered upon request ►Offer price is net plus VAT ►The goods are sold excluding any warranty ►Technical data subject to change ►Subject to prior sale ❗The sale is exclusively to business customers❗

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Holhcdwey N Du Dswonl Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: VMX1-06203123BEB, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 455 mm, rapid traverse X-axis: 19 m/min, rapid traverse Y-axis: 19 m/min, rapid traverse Z-axis: 13 m/min, nominal power (apparent): 13 kVA, controller manufacturer: HURCO, controller model: ULTIMAX, total height: 2,600 mm, total length: 2,500 mm, total width: 2,000 mm, table width: 355 mm, table length: 760 mm, table load: 340 kg, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 33 A, HURCO VMX 1 CNC vertical machining center Hjlhcdwoy Iwnzjwenl - Note: Without the vises shown in the photos! Attention: The item must be collected between 23.06. and 25.06.2026 on a date to be arranged. FCA D-73230 Kirchheim Teck – loaded onto truck

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Speeds up to 6,000 rpm 3 vices Weight: 4 t Hnslhcjy R N Urjdwwsl Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: ready for operation (used), Year of construction: 2014, The HOLZ-HER EVOLUTION 7405 is a compact yet powerful vertical CNC machining center that delivers complete machining in a single setup—with precise milling on all four edges for perfectly finished parts. The machine processes materials from 8 to 70 mm thick and up to 3200 mm in length, while taking up minimal floor space, making it an extremely flexible and efficient solution for modern furniture and woodworking production. Brand: Holz-Her Model: Evolution 7405 Year of manufacture: 2014 Stock No.: 2002879BXA Helhcdwsyxbv Rowonl TECHNICAL DATA Machining dimensions Maximum material thickness: 8 – 70 mm. Vertical through-feed (width): 1,200 mm. Length: Unlimited (1,500 mm without repositioning). Minimum workpiece: approx. 200 x 70 mm. Working dimensions (X, Y, Z) Max board size (without additional support): X: 3,200 mm Y: 920 mm Z: 70 mm Minimum workpiece size: X: 200 mm Y: 70 mm Z: 8 mm Maximum machining In the X direction (without re-clamping): Circular milling/formatting (excl. milling radius): 1,450 mm Complete machining (milling, drilling, milling groove): 1300 mm In the Y-direction: 920 mm Performance & Spindle Spindle power: 7.5 kW (4-axis) / 6.5 kW (standard) / 10.3 kW (optional) HSK mounting. Tool changer: 6-position (standard on 4-sided). Spindle speed: Variable, high-performance. Vector speed: 68 m/min. Features & Equipment 4-sided machining: Complete formatting and edge profiling. Drilling unit: Standard with milling spindle and drill head. Vacuum system: Intelligent, automatic positioning of suction cups. Control system: CAMPUS/NC Hops. Requirements Floor space: Less than 5 m²

Condition: new, Year of construction: 2025, Ref. -No.: 10457 Manufacturer: IGREK Type: VMC 1160 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 828D Storage location: Istanbul Country of origin: Türkiye X-Travel: 1160 mm Y-Travel: 610 mm Z-Travel: 600 mm Main spindle drive power: 9 kW Spindle Taper: HSK Tool Piece Magazine With: 24 Pcs./pcs. Holhcdwjxmd Snowenl Spindle Speed: 10000 RPM Rapid Traverse X-Axis: 40 m / min Rapid Travel Y-Axis: 40 m / min Rapid Traverse Z-Axis: 40 m / min Machine length: 3500 mm Machine width: 2900 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 8 t Further information: This is a new storage machine with 0 operating and spindle hours. The machine is available immediately and can be ordered with Siemens or Heidenhain controls. Optional installation and servicing of the machines can be offered.

Condition: used, Year of construction: 2017, operating hours: 4,898 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, CNC machining center, used Manufacturer: AWEA Model: BM-1600 Year of manufacture: 2017 Control system: Heidenhain iTNC 530 HSCI Hnjlsyy R Hzohcdwwel Operating hours Spindle hours: 4,898 h Total power-on hours: 18,739 h Working area: X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 800 mm Spindle: Speed: 10,000 rpm Power: 22/35 kW Taper: BT 50 Table: 1,700 x 800 mm Max. load: 2,000 kg Equipment: - 40-position tool changer - Through-spindle coolant 20 bar - Electronic handwheel - Left-side chip conveyor - Direct linear measurement The machine was used in-house for manufacturing products by an automation technology company. A significant amount of aluminum processing was done on this machine.

Condition: good (used), Year of construction: 2003, All parts shown by hand not come with machine. Holhcjy Ddb Tsdwwonl

Condition: used, Year of construction: 2016, operating hours: 24,872 h, machine/vehicle number: 274448, 5 axes, travel paths (x/y/z): 350/550/510 mm, weight: 6,900 kg, power: 34.7 kVA, chip conveyor, 30-position tool changer, SK 40 tool holder, internal coolant supply, rotary table Ø: approx. 50 cm, error message after restart: data loss, 1 tool cabinet with 7 drawers, with accessories, !!!Collection: 10th+11th June 2026!!! Hnjlhoyztfpocdwwel

Condition: used, Year of construction: 2018, operating hours: 15,847 h, machine/vehicle number: 293044, 5 axes, travel (x/y/z): 850/550/510 mm, power: 34.5 kVA, spindle speed: 12,000 rpm, weight: 11,000 kg, 30-position tool changer, internal coolant supply, tool holder SK 40, chip conveyor, rotary table Ø: approx. 60 cm, 1 tool cabinet with 7 drawers, with accessories, 1 stool, !!!Collection: 10th + 11th June 2026!!! Hslhcdwjyztfvewonl

Condition: ready for operation (used), Year of construction: 2006, A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible. Hnolhcsy Igbqjdwwjl

Condition: ready for operation (used), Year of construction: 1991, A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible. Holhcdwey H I H Sewsnl

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining centre with SIEMENS 840 D, 2-fold pallet changer, IKZ, linear guides and 30-fold WZW table size 2 x 1000 x 450 mm tool holder DIN 69871 ISO 40 travel X-axis 1100 mm Y-axis 500 mm Z-axis 640 mm speed range 50 - 10.000 rpm table load 600 kg feed range, X/Y/Z, infinitely variable - 10000 mm/min rapid traverse in all axes 30 m/min Drive power 18,5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm Hnjlhcdjd I R E Njwwel weight approx. 6700 kg Accessories / special features: - CNC-control SIEMENS 840 D - 2-fold pallet changer - 30-fold tool changer - Full protection cabin with safety doors, electrically protected - High speed up to 10.000 rpm and drive power with 18,5 kW - Linear guides with double recirculating roller shoe, allowing high torques to be absorbed uniformly in all directions - Ball screw spindles in all 3-axes - The entire machine bed is made of Meehanit cast iron and ensures precision, rigidity and vibration damping - Tool holder DIN 69871, ISO 40 - Hinged chip conveyor with integrated coolant system - 4th axis already prepared - CE-conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 1,250 m/min, rapid traverse Y-axis: 620 m/min, rapid traverse Z-axis: 620 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain iTCN530, workpiece weight (max.): 1,000 kg, rotational speed (min.): 15,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Hnjlhoyybpmocdwwsl Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000

Condition: used, Year of construction: 2017, operating hours: 4,898 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, CNC machining center, used Manufacturer: AWEA Model: BM-1600 Year of manufacture: 2017 Control system: Heidenhain iTNC 530 HSCI Operating hours Spindle hours: 4,898 h Total power-on hours: 18,739 h Working area: X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 800 mm Spindle: Speed: 10,000 rpm Hjlhcdoyl Svaswwjnl Power: 22/35 kW Taper: BT 50 Table: 1,700 x 800 mm Max. load: 2,000 kg Equipment: - 40-position tool changer - Through-spindle coolant 20 bar - Electronic handwheel - Left-side chip conveyor - Direct linear measurement The machine was used in-house for manufacturing products by an automation technology company. A significant amount of aluminum processing was done on this machine.

Condition: used, Year of construction: 2004, HURCO VMX 64 X-axis travel: 1625 mm Y-axis travel: 865 mm Z-axis travel: 760 mm Hjlowyna Sjhcdwwsnl CNC control: Ultimax 4 table size: 1680 x 890 mm max. table load: 2000 kg spindle taper: SK 40 rapid traverse x/y/z: 18 / 18 / 13 m/min drive capacity – spindle motor: 15 kW tool magazine: 40 positions max. spindle speed: 10,000 rpm machine fully operational

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC640, spindle speed (max.): 10,000 rpm, We offer in good condition with around 2.500 spindle hours Posmill CE1000 with following options: Heidenhain linear scales in X, Y and Z-axis Heidenhain TNC 640 control Air true spindel Spindel 10.000 RPM ISO40 Tool changer 40 tools ATC Belt filter with Internal coolant 20 bar Hexagon Touch probe Hexagon tool probe Chip conveyor Thermal spindel compensation Z-axis Technical specification:" X-Axis Travel: 1060 mm Y-Axis Travel: 600 mm Hjlhcdwsyindajwsnl Z-Axis Travel: 600 mm Machine is within new tolerence and geometry protocol is available.

Condition: ready for operation (used), Year of construction: 1991, Control: FANUC Series O-M, with tool magazine, coolant system, central lubrication, electrical cabinet, air conditioning unit and spindle oil cooler HARBOR OILCON HBO-250 PT, year of manufacture: 1991. An on-site inspection is possible. Hnjloy D Tqkjhcdwwjl

Condition: ready for operation (used), Year of construction: 1987, Number of axes: 3, control: Fanuc OMA, operating hours: 4708h, with tool magazine. An on-site inspection is possible. Hnelhcdwey D Tqdewjl

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 208, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,100 mm, table length: 450 mm, table load: 700 kg, overall weight: 7,000 kg, - Year of manufacture: 1994 - Single owner, used in-house - Fully operational, powered on, ready for demonstration - Control system: Fanuc 0MC - X-axis travel: 800 mm - Y-axis travel: 450 mm - Z-axis travel: 510 mm - Table working area: 1100 x 450 mm - Max. permissible workpiece weight: 700 kg - Number and width of T-slots: 5 x 18 mm - Spindle speed range: 20 - 6000 rpm - Rapid traverse speed: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min - Tool holder: SK40 / MAS BT40 - Tool magazine: 25 stations Hnolhcdexp Hwrswwsl - Machine weight: 7000 kg - Serial no.: 208 Net price ex works, unloaded, at location Luckenwalde (Germany), excluding transport

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 308, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,600 mm, table length: 650 mm, table load: 1,850 kg, overall weight: 13,000 kg, - Year of manufacture: 1994 Hnelhcdsxp Hu Dowwol - Single owner, used exclusively in-house - Fully operational, powered, ready for demonstration - Control: Fanuc 0MC - X-axis machining range: 1300 mm - Y-axis machining range: 650 mm - Z-axis machining range: 660 mm - Table working surface: 1600 x 650 mm - Max. permissible workpiece weight: 1850 kg - Number and width of T-slots: 5 x 18 mm - Spindle speed range: 20 - 6000 rpm - Rapid traverse speed: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min - Tool holder: SK50 / MAS BT50 - Tool magazine: 30 stations - Machine weight: 13,000 kg - Serial number: 308 Net price ex location Luckenwalde (Germany), not loaded, without transport