Used Vmc for sale (126)

Condition: used, Year of construction: 2016, feed length X-axis: 711 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, Traverses X Y Z ; 711 x 406 x 394mm, Table size 864 x 381mm, table load 113 kgs, rapid feedrates 61m/min, spindle power 15Hp, spindle speed 15,000rpm, spindle taper BT40, 18 station ATC, Haas control, coolant, swarf auger. Rjdpjv Sut Rsfx Agzsck

Condition: used, Year of construction: 2006, 2006 Hurco VM1 Vertical Machining Centre YOM: 2006 Rcodsv Suwiepfx Agzsk Technical Information – Hurco VM1 VMC General Data Measurements width: 1800 mm Measurements depth: 1900 mm Measurements height: 2600 mm Machine weight: 2700 kg Main drive Number of spindles: 1 Spindle speed range: 40-8000 1/min Spindle motor power: 11 kW Movement X-AXIS Movement: 660 mm X-AXIS Working Feed: 8 m X-AXIS Rapid traverse: 20 m X-AXIS Accuracy: 0.005 Y-AXIS Movement: 350 mm Y-AXIS Working Feed: 8 m Y-AXIS Rapid traverse: 20 m Y-AXIS Accuracy: 0.005 Z-AXIS Movement: 450 mm Z-AXIS Working Feed: 8 m Z-AXIS Rapid traverse: 20 m Z-AXIS Accuracy: 0.005 Workpiece Workpiece weight: 350 kg Table Outer length: 762 mm Outer width: 356 mm Delivery & Siting available at extra charge – Please ask for price.

Condition: excellent (used), Year of construction: 2007, Vice NOT included Rjdpfx Asxwlx Dogzjck Comes with a small selection of tooling. X Axis Travel - 660mm, Y Axis Travel - 356mm, Z Axis Travel - 457mm, Max Table Load - 340kg, Spindle Motor - 10HP, Spindle Speed - 8000RPM, Spindle Taper - 40CT, Tool Changer - 20ATC

Condition: excellent (used), XYZ 710 VMC Vertical Machining Centre, Table Size 800mm x 445mm (Vac Table not included) with Siemens Sinumerik CNC Control, 24 Tool ATC, BT40 Spindle Taper, 8000rpm Spindle Speed, Filtermist FX5002 Extractor. S/No. SMT00054 Delivery available on request, at extra cost. 14 day return or repair. Rodpfx Agsxvpffjzsck

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Rcjdjx Iwg Rspfx Agzsk Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Mori Seiki SV-500/50 4 Axis Vertical Machining Centre with Mori Seiki MSC-501 CNC Control, Table Size 1100mm x 600mm, 40 Tool ATC, BT50 Spindle Taper, Cool Jet 70 - 30 DF High Pressure, Coolant Filtration Unit, Filtermist FX7002 Oil Mist Extractor, Spindle Speed Max 6000rpm, Renishaw Tool Probe Eye, Machine Weight 7800kg. S/No. 1864 Includes Various BT50 Spindle Tool Holders in ATC and Boxes Rodpfx Agsx Nap Djzeck

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Rcsdevt Amuopfx Agzsk Automatic tool changer for 12 tools SK40 holder Coolant system

Condition: like new (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, table width: 520 mm, table length: 1,150 mm, table load: 500 kg, spindle speed (max.): 8,000 rpm, Used vertical machining center Fanuc model VMC 1050A with: - X-axis travel: 1050 mm - Y-axis travel: 520 mm - Z-axis travel: 520 mm Rjdpfox Ex Ahex Agzock - Fanuc 18M control unit - 24-position tool magazine - Spindle speed with gear change: 8000 rpm - Complete CE-compliant full enclosure - Standard accessories - Year of manufacture: 2002 Free financing over 12/24 months

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 27000 kg Measurements height 3400 mm Movement X-Axis Movement 2050 mm Z-Axis Movement 800 mm Y-Axis Movement 1100 mm Main Drive Rcjdpfx Aex D Idvegzek Number of axis 3 Spindle Speed 6000 RPM Tool taper BT 50 Tools Slots in storage 40 Dimensions Machine Length 7200 mm This 3-axis Johnford VMC-2000SHD was manufactured in 2005. It features a large table size of 2200 × 1000 mm and extensive travels: X-axis at 2050 mm, Y-axis at 1100 mm, and Z-axis at 800 mm. With a spindle speed ranging from 10 to 6000 rpm and a tool magazine capacity of 40 tools, this vertical machining centre is ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2015, operating hours: 7,206 h, 2 x CNC Machining Centers + Accessories as a Package, Used 1. KONDIA A-6 Manufacturer: KONDIA Model: A-6 Year of manufacture: 2015 Control system: Heidenhain TNC 530 Operating hours: Rcjdpfx Agsx I S Icozok Spindle hours: 7,206 h Total power-on hours: 28,791 h Working area: X-axis: 600 mm Y-axis: 400 mm Z-axis: 510 mm Equipment: - 20-position tool changer - Through-spindle coolant (15 bar) - Electronic handwheel - Chip conveyor, left-sided 2. KONDIA A-10 Manufacturer: KONDIA Model: A-10 Year of manufacture: 2010 Control system: Heidenhain TNC 530 Operating hours: Spindle hours: 11,095 h Total power-on hours: 49,429 h Working area: X-axis: 1,000 mm Y-axis: 500 mm Z-axis: 610 mm Equipment: - 40-position tool changer - Through-spindle coolant (15 bar) - Electronic handwheel - Chip conveyor, left-sided 3. Accessories - 2 x 3D workpiece touch probes - 1 x Tool measuring probe - 6 x GRESSEL machine vices - Approximately 150 SK 40 tool holders with tools The machines were used for the in-house production of a manufacturer specializing in automation technology. Extensive aluminum machining was carried out.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Rodpfx Aew Nklhegzjck Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 630 mm, CNC control Fanuc O-M 24-fold tool changer Rjdpfjvfrdgsx Agzjck electronical hand wheel chip tank Technische Daten / technical details: X-Weg / X-travel 850 mm Y-Weg / Y-travel 550 mm Z-Weg / Z-travel 630 mm Spindelaufnahme / spindle taper ISO40 Drehzahl / spindle speed 8000 UpM / rpm Tischaufspannfläche / table clamping area 1000x540 mm Werkzeugwechselmagazinplätze / number of places in tool changer 24 Gewicht ca. / weight ca. 5500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Travel X - Y - Z axis: 1,016 x 500 x 570 mm table clamping area: 1,100 x 470 mm max. table load: 1,500 kg Rodpfxsx Hx Dbs Agzeck rapid traverse X - Y axis: 18,000 mm/min rapid traverse Z axis: 12,000 mm/min feed rate: 8,000 mm/min spindle speed range: 1 - 8,000 rpm tool holder: ISO 40 drive power - main spindle: 11 kW tool magazine: 24 positions year of manufacture: 2001 control: FANUC O-M machine weight approx.: 6,800 kg

Condition: excellent (used), Year of construction: 2003, X travel 1020 mm Rcsdpfx Agexwvv Tszok Y travel 510 mm Z travel 500 mm Spindle speed 6000 rpm Table load capacity 800 kp Table size 1150 x 580 mm Motor power 18.5 kW Weight 4,400 kg Dimensions: 2200 x 3200 x 2800 mm

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 4800 kg Rodpfx Agox D I Unszock Control Unit Brand SIEMENS Model Sinumerik 810D Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm This 3-axis HARDINGE Bridgeport VMC 1000 vertical machining center was manufactured in 2007. Consider the opportunity to buy this HARDINGE Bridgeport VMC 1000 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2017, operating hours: 4,898 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, CNC machining center, used Brand: AWEA Model: BM-1600 Year of manufacture: 2017 Control system: Heidenhain iTNC 530 HSCI Operating hours Spindle hours: 4,898 h Total power-on hours: 18,739 h Working area: Rcodpfjx I S E Ijx Agzok X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 800 mm Spindle: Speed: 10,000 rpm Power: 22/35 kW Taper: BT 50 Table: 1,700 x 800 mm Max. load: 2,000 kg Equipment: - 40-position tool changer - Through-spindle coolant 20 bar - Electronic handwheel - Left-side chip conveyor - Direct measuring system The machine was used in-house for the production of automation technology components. A significant amount of aluminum was machined.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Rcsdpjtrhq Hsfx Agzsk Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,173 h, functionality: limited functionality, machine/vehicle number: 822003, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 600 mm, feed length Y-axis: 410 mm, feed length Z-axis: 520 mm, nominal power (apparent): 15 kVA, controller manufacturer: Heidenhain, controller model: TNC 426PB, total height: 2,535 mm, total length: 2,020 mm, total width: 2,000 mm, table width: 840 mm, table length: 420 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 6,000 rpm, spindle motor power: 8,500 W, number of spindles: 1, number of slots in tool magazine: 22, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The milling machine is still running, while I'm writing this description, which proves it’s in good condition. We purchased the machine used, and it has had one defect from the beginning — when entering drilling cycles from the operator panel, the machine freezes and needs to be restarted. However, if a program containing drilling cycles is uploaded to the machine via the RS232 port, those cycles run correctly. Apart from that, all other components of the mill operate flawlessly. We’re also including a table-mounted rotary table (fourth axis) Magerl Rotamatik 120. The machine is for sale, because Heidenhain operators are hard to find in our area, and we want to buy something with HAAS controls instead. Rjdpexrca Ujfx Agzsck

Condition: excellent (used), Year of construction: 2000, EMCO VMC 600, Siemens Rjdpfxexxakws Agzjck Year of manufacture: 2000

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm Redpfx Aexuqv Ajgzjck A - Axis: 360000° B - Axis: - 110 to + 110° Table Length: 2900mm Table Width: 750mm Table load: 2150 Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Width: 3423mm Height: 2620mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand SIEMENS Model Sinumerik Movement X-Axis Movement 1400 mm Z-Axis Movement 600 mm Rodpfxex D Elwj Agzock Y-Axis Movement 700 mm This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 142333097, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 6,000 rpm, table load: 2,000 kg, TECHNICAL DETAILS Travel X-axis: 1,600 mm Travel Y-axis: 800 mm Travel Z-axis: 710 mm Max. spindle speed: 6,000 rpm Table dimensions (L x W): 1,800 x 800 mm Table load capacity: 2,000 kg Rjdsx Ap S Eepfx Agzeck Spindle taper: ISO 50 MACHINE DETAILS Machine dimensions: 2.73 x 4.31 x 3.03 m Length with chip conveyor: 4.31 + 1.03 m Depth with control system: 2.73 + 0.40 m Depth with coolant tank: 2.73 + 1.80 m Control unit: Heidenhain iTNC 530 Note: The machine can still be inspected under power until week 50.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance Y-axis: 600 mm, feed length X-axis: 1,270 mm, feed length Y-axis: 635 mm, feed length Z-axis: 515 mm, controller model: Heidenhein ITNC 530, total height: 2,750 mm, total length: 4,200 mm, total width: 2,700 mm, table width: 600 mm, table length: 1,370 mm, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, The Hartford VMC 1270 S Vertical Machining Centre from 2004 is a robust and precise machine made in Taiwan, designed for three-axis machining operations. This model offers a generous working envelope with travels of 1270 mm on the X-axis, 635 mm on the Y-axis, and 515 mm on the Z-axis. Control is handled by the reliable Heidenhain system, ensuring stable operation and convenient programming. The machine is equipped with a table measuring 1370 × 600 mm, allowing workpieces of up to 950 kg to be mounted. The spindle reaches speeds of approximately 8000 rpm, providing solid performance for most applications. The machining centre features a 20-position tool magazine and automatic tool changer, significantly speeding up operations and enabling more complex machining processes. The construction of the machine is exceptionally stable—the total weight of around 7000 kg translates into high rigidity and machining accuracy. A chip conveyor is also included, facilitating cleanliness and uninterrupted operation. Technical specifications for HARTFORD VMC 1270 S: Operating time: 7,600 hours Control: Heidenhain Table dimensions: 1370 × 600 mm Maximum table load: 950 kg Travel X/Y/Z: 1270 / 635 / 515 mm Rapid traverse X/Y/Z: 20 m/min Spindle speed: approx. 8000 rpm Tool magazine: 20 positions Automatic tool changer Rodpfx Agsx Daxxjzock Chip conveyor Power requirement: 29 kVA Machine dimensions (L×W×H): approx. 4.2 × 2.6–2.7 × 2.8 m Transport dimensions: 3.22 × 2.28 × 2.68 m Total weight: 7000 kg

Condition: used, Year of construction: 2002, Technical details: x-travel: 600 mm Redpfxeviwg Uo Agzeck y-travel: 410 mm z-travel: 520 mm tool change unit: 16 turning speeds: 8000 1/min control: SIEMENS 810 shopmill table surface area: 840 x 420 mm rapid traverse X- and Y-axis: 36 m/min rapid traverse Z-axis: 20 m/min taper ISO: SK 40 spindle drive: 15 kW weight of the machine ca.: 2,5 t space requirements approx. LxWxH: 2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, approx. h "machine on", approx. h "spindle on" *

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 3 This 3-axis Hartford Omikron 1020 A was manufactured in 1998. It's a vertical machining center that recently had its X-axis bearings replaced. If you are looking to get high-quality milling capabilities, consider the Hartford Omikron 1020 A machine we have for tact us for more information. Rjdpfxsx D Nucs Agzock Application Types Milling