Cnc vtl buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Original year: 1971 Renovation: 2005 Faceplate diameter: 4200 mm Maximum turning diameter: 4500 mm Max turning height: 4050 mm Maximum workpiece weight: 100 tons 7x9smmk RAM vertical stroke: 2000 mm Plunger cross travel: 2600 mm Face plate speed: 0.315 to 40 RPM Hydrostatic faceplate Control: Siemens 840 D Machine equipped with: C-axis and left spindle plunger! more
5
CNC Siemens 840D-SL Clpzc8f Faceplate diameter: 7,000 mm Turning diameter: 8,150 mm Max. workpiece height: 4,200 mm Faceplate turning speed: 35 rpm Main motor power:48 x 2 kW C-axis Ram section: 300 x 300 mm (both) Rotary tools speed: 2,000 rpm Coolant through spindle Rotary tools motor power: 37 kW (both) Crossrail vertical travel: 2,000 mm RAM travel: 2,000 (both) ATC: 18-station (for each Ram) Pick-up milling heads: Yes, (2) for each Ram Max. workpiece weight: 150,000 Kg Weight of the machin... more
6
CNC Vertical Borer Doerries Table size: Ø 3.000 mm Swing max: Ø 3.500 mm Workpiece height: 1.950 mm Horizontal stroke support: 1.000 mm Vertical stroke support: 1.800 mm CNC control: Siemens 850 R08nezpz Load on table max: 25.000 kg Table speeds: 0,36 - 188 rpm. Feeds: 0,1 - 2.000 mm/min. Rapid traverses: 2.000 mm/min. Featured with: - Additional table - Grindingspindle - Documentation - Tooling Machine LxWxH: 640 x 560 x 400 cm Machine weight: 46 Ton more
4
This machine was manufactured in 1976 but in 1996 modernized by a new CNC-control ! Please notice that this machine has abnormally turning hight !! face plate = 1,500 mm turning diameter = 1,600 mm turning hight = 1,950 mm !!!!! speeds = 1 up to 240 rpm. Bi83u0duu main motor = 55 KW IT IS POSSIBLE TO INSPECT THIS MACHINE UNDER POWER IN OUR WAREHOUSE ! more
6
General Overhaul with Retrofit: 2010 Chuck dia: 1800 mm Max. swing dia: 2000 mm Max. turning height: 1200 mm Max. workpiece weight: 6000 kg Max. Speed: to 240 rpm Detailed retrofit in 2010 with: - New Siemens AC spindle servo motor - mechanical overhaul - all drives & servo motors Siemens - Fagor 8055 control 7ugjgq220 - CE confirm safety covers - Chip conveyor more
6
Stocknumber 1020038 Type of machine CNC VTL Make DORRIES Type VCE 2400/220 Build in 2000 Type of control SIEMENS Sinumerik 840 Faceplate diameter 2200 mm Max. Swing diameter 2400 mm Turning height max. 1700 mm Weisndyjw Max. adjustment off cross rail 1100 mm Max. workload on the table 17.000 kg Turning speeds of the faceplate (Rpm) 3.15 - 280 Additional information Mit C-axe and driven tools ATC for 60 tool Conveyor incl. grindingspindle with 3 axes simultaneous software more
5
1. Capacities - Maximum turning diameter with either Vertical Head 3300 mm - Maximum machining height under Cross Rail, at least 2200 mm - Maximum weight of the workpiece 20 tons 2. Table - Table diameter 3000 mm - Speed (inf. Variable) 1- 110 RPM - Main motor drive (AC) 100 KW - 4 jaw chuck with reversible jaws 3. Vertical Heads - Straight Ram vertical travel (250X250 mm cross section) 1300 mm - Horizontal and Vertical travel by means of 10 mm pitch ball screws Miwie7iv 4. Cross Rail... more
1
Running Hour only : 6711 9xvyoowj0 Fanuc 18i control system C axis mill/drill Max swing dia 1600mm Max turned dia 1350mm Max turned height 1200mm Max cross travel X axis 1375mm Max vertical travel Z axis 900mm Table size 1250mm Table load 5000kg Table speeds (2 ranges) 2-108/108-350rpm 2 speed programmable gearbox Standard Fanuc alpha spindle drive power 45kW Max torque 12,500Nm Tool changer style ATC Number of tools 12 Tool change time) 30 (secs) Tool shank 32x32mm Boring bar size (max) 63... more
3
Machine type : Vertical Turning Machines Maker and model : HNK VTC-50/60 Table diameter 5000mm Max. Swing 6000mm W travel 2500mm Live milling at Ram and C axis Max. loading capacity on table: 60tons Fanuc 31i-type A Automatic Tool Changer 24 pc Little used only for making samples in Hyundai Ship yard R&D center Bab08q8qq9 excellent condition like new. dismantled, ready to ship Price and more photos on request more
6
CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Ma... more


cnc vtl
every day

New machines via email!

Be informed!
5
This vertical lathe was built in 2014 for our customers.At that moment, he lost a contract work for this machine.That's why he wants to sell this machine.This machine is under power.Delivery time: immediatelyControl: Siemens 840 dSupport number: 2 pcs (one is cnc controlled, conventional second)Turning diameter: 2500 mmHeight of turning: 2200 mm!Table diameter: 2250 mmTable load: 16 000 kgMax table speed: 120 RPMMain motor power: 55 kW Dnw2wql0q more
4
Control Siemens 810D Mev2t Table diameter 1400 mm Turning diameter 1700 mm Max. height under cross rail 1600 mm Max. height under tool holder. 1400 mm Max. workpiece weight 9 000 kg Main drive motor power 40 kW Rotation of the table 1,5-300 rev / min more
4
Nominal Turning Envelope faceplate Diameter 4,000 mm Machining Diameter 4,200 mm Machining Heights 2,000 mm Work Piece Weight 20,000 kg Nominal Turning Travels X-Axis Rams -300 / 2,250 mm Z-Axis Ram 1,300 mm W-Axis Elevating Cross-Rail 1600 mm WorkTable WorkTable Diameter 4,000 mm WorkTable Speed 1 - 60 rpm Power Continuous S1 60 kW Torque Continuous S1 85,000 Nm X-Axis Ram Saddle Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N Z-Axis Ram Power Continuous S1 5.5 kW Thrust Continu... more
4
Maker : Hankook(Korea) Model : VTB-90/120E System : Fanuc - 31iTB Specs : ¢9,000 x ¢12,000 Dooqv07z3 Height : 6,000 Live tool (turn mill): C axis 0.001 Degree Main motor : 100Kw(2Set) Year : 2015년 please check attached spec sheet working under power more
6
Hankook VTC-4050E CNC Vertical Boring Mill (VBM / VTL) Manufactured new in 2010. Fanuc 31iA CNC Control. Faceplate diameter 4000 mm. Vc3laycr Load on the table max. 30t. Swing diameter 5000 mm. Turning height max. 2500 mm. Ram cross travel X 2835 mm. Ram vertical travel Z 1600 mm. Crossrail vertical travel W 2100 mm. Main drive 60/75 kW A/C. Table rotation speeds 1 - 75 rpm. C-Axis 0.001°. Milling spindle drive 22/26 KW A/C. Milling spindle speeds 15 ~ 1500 rpm. Tool magazine positions : 24. M... more
4
Maker : Hankook System : Fanuc - 18iT Specs ; ¢2500 x ¢3000 Nobjljr9 Height ; 2000 ATC ; 12 Machine year ; 2009 dismantled more
4
Maker ; OM (Japan) System ; Fanuc - 16T Year : 2010 Retrofit Specs : 6,000 x ¢11,000mm Bf8hhxu0 Column moving type Height : 6,000mm Ram Stroke : 2,700mm Main Spindle Motor 160HP Working under power excellent condition more
5
CNC VTL Retrofitted from conventional to CNC at 2008 Maker : Niles 나일스 System : F-0T Table : ¢7600 Max Swing : ¢9000(최대경) Max working height : 5400 Max work piece weight : 300톤 Ram : 350 x 350 (2 sets with separated CNC) Ram stroke : 2600mm Main Motor : 110kw x 2 with reducer nice working condition. 3thozlien can inspect under power more
6
Machine Model : CNC VTL with Live Milling + Y Axis (Front-Back 2500mm Column moving) Maker : Shibaura (Japan) Table : ¢8000 Max Swing : ¢10,800 (최대가공경) Max Work piece height : 4350mm Max Work piece weight : 250~300T Ram : 350 x 350mm Ram Stroke : 2600mm Main Motor : 75kw x 2 ( 2 motors synchronous control) System : F-18iTB X, Y axis and table : all hydraulic static type Milling Ram : 450 x 500mm Ram stroke : 1250mm Y axis : 5000mm (column moving) C axis table : 0.001 degree indexing Grtkrl9... more
6
**SPECIAL OFFER: FREE OPERATOR TRAINING COURSE IF MACHINE SOLD IN NOVEMBER** ***MACHINE AVAILABLE TO END USER CUSTOMER ONLY*** S20 CNC FAVORIT, 400mm CENTRES X 100mm, MARPOSS LENGTH POSTIONING UNIT, TABLE SWIVEL 15 DEGREES, SWIVELLING WORKHEAD, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, FANUC 16 T WITH PICTOGRAM PROGRAMMING, VERY WELL MAINTAINED..... WE BUY/SELL ONLY SELECTED STUDER MACHINES DIRECT TO/FROM CUSTOMER. WE ARE SPECIALIST ONLY IN STUDER MACHINES FOR NEARL... more
2
CNC Pull studs, tool holder, tool holder, milling cutter holding fixture, milling br / br / -5 piece br / br -with groove / -with M16 in the head br / -for SK40 recordings br / thread M16 br / br completely -Price / -Gesamtlänge 60 mm br / weight 0.3 kg Wbxzu78gv more
6
turning diameter 600 mm turning length 500 mm control SIEMENS 810D spindle diameter in front bearing 160 mm turning speed range - spindle 25 - 1450 U/min spindle motor 37 kW number of tapers in turret head 16 rapid power traverse in X-and Z direction 10 m/min powered chuck diameter 315 mm spindle bore 100 mm tool holder -shaft diameter 50 mm total power requirement 60 kVA weight of the machine ca. 6,8 t Msjpnc dimensions of the machine ca. 4,7 x 2,5 x 2,7 m Machine retrofit in 1999 with SI... more
2
Dr. Nahr ATC 942 for CNCMessgerät users, only for testing purposes in the operation, used, 100% functional, very good condition Byvi0aje more
3
turning diameter:*320 mm turning length:600 mm control:SIEMENS powered chuck diameter:200 mm Tool bore:VDI 30 turning diameter over bed slide:160 turning speed range:112 - 5000 U/min 7amicqzal spindle bore:42 mm turret (x-stations):12 total power requirement:30 kW weight of the machine ca.:8,1 t dimensions of the machine ca.:6 x 4 x 2,5 m with CNC SIEMENS 810 T control C-axis, driven tools hydrostatic round guiding in z-axis tailstock chip conveyor, coolant device with extensive accessori... more
1
YOM December 2001 CNC Fanuc 21i TB Max. Diam. Over Bed 550 mm. Más Diam Over Guides 390 mm. Travels ( Z/X) 580 /205 mm. Max. Turning Diameter 290 mm. Max. Turning Lenght 510 mm, Rapid Traverse X Axis 24.000 mm/min. Rapid Traverse Z Axis 30.000 mm/min. Spindle Cross Ø 70 mm Spindle Speed 3000 rpm Main Engine Power 18,5/22 Kw Positioning Tailstock INCLUDED Quill Diameter 75 mm. Turret Stations 12 Bahtdbovk2 Indexing Time of Turret 0.1 s. C Axis and Driven Tools INCLUDED Driven Tool Speed 6.000 r... more
6
***MACHINE AVAILABLE TO END USER CUSTOMER ONLY^^^ WITH OPTION OF INSTALLATION, OPERATOR TRAINING, SERVICE ETC 650MM CENTRE DISTANCE x 175MM HEIGHT, EXTERNAL WHEEL 500MM, ACTIVE LENGTH POSITIONING, MOVOMATIC IN PROCESS GAUGE READY, ELECTRONIC WHEEL BALANCING, SWIVEL OF TABLE 8.5 DEGREES, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, FANUC 21i T. GRINDING MACHINES FOR RENT..... *****FREE OPERATOR TRAINING ON ALL MACHINES SOLD IN NOVEMBER***** Bahe0pfkk... more
6
turning diameter max. 700 mm turning length max. 1.250 mm control Fanuc 15 TF FAPT Swing dia. over traverse guideway max. 500 mm greates pass round over bed max. 700 mm Main spindle: turning speed range - main spindle 3 - 2.000 min/-1 transmission ratio 3 power capacity - main spindel 45 / 37 kW spindle diameter in front bearing 170 mm spindle bore 105 mm usable bar diameter 90 mm spindle nose JIS A1-11 max. Torque 3980 Nm centre distance 1.325 mm chucking diameter 450 mm max. workpiece wei... more
6
workpiece diameter 2 - 250 / 320 mm threading length 1150 mm thread pitch 0,8 - 300 mm Control Reishauer grinding length 1150 mm clamping length max. 1530 mm module 0,5 - 12 pivoting angle +/- 50 ° relief of the tap 10 mm Bore 66 mm cutting speed 45 m/s 80mpc90mz workpiece weight 250 kg electrics - voltage/frequency 380 / 50 V/Hz total power requirement 34 kVA weight of the machine ca. 8 t dimensions of the machine ca. 0 m more
1
Pressing force: 160 kN maximum tool length: 550 mm Length x width x height: 820 x 850 x 1520 mm Infinitely adjustable stroke: 160 mm Cdo9rttm Weight: 1200 kg The photo shows another similar machine. more
3
turning diameter:*360 mm 8yxm9ai turning length:800 mm control:TX 8 turning diameter over bed slide:160 spindle bore:90 mm spindle turning speed range:1 - 3150 U/min feed - longitudinal/cross:0 - 10000 mm/min tailstock quill taper MT:4 tailstock quill stroke:110 mm total power requirement:38 kW weight of the machine ca.:3,5 t dimensions of the machine ca.:3,4 x 1,9 x 1,8 m - CNC control Traub TX 8 - 10-fold revolving head - tool preseting device - coolant device, chip conveyor more
6
turning diameter 200 mm turning length 635 mm control Siemens 840D powerline swing diameter 250 mm spindle distance 900 mm turning speeds 5000 U/min power capacity 37 kW weight of the machine ca. 10 t DMG-GILDEMEISTER Twin 65 RG2 V8 - 180 ° B-axis and Y-Achsefür eccentric drilling and milling operations, let be inclined holes, curved surfaces and complicated milling contours 70yjudnuq easy to prepare - NC-controlled, cross-traversable counter spindle for simultaneous, collision-free interio... more
6
---MACHINE AVAILABLE TO END USER CUSTOMER ONLY--- 600mm GRINDING WHEEL, IEMCA LOADER, WHEELHEAD 30 DEGREES +/- 8.5 DEGREES, SENSITRON, MOVOMATIC (AS NEW) IN PROCESS GAUGE TO GRIND WITHIN 2 MICRON, VERY LOW WORKING HOURS WITH ONLY 19,000 HYDRAULIC ON HOURS, 2 TROLLIES WITH VARIOUS PALLET TRAYS TO FEED LOADER, IDEAL PRODUCTION GRINDER FOR GRINDING CARBIDE - TOOL STEEL - STAINLESS - HARDENED STEEL ETC....PRICE: PLEASE SUBMIT YOUR OFFER FOR CONSIDERATION INCLUDING YOUR GRINDING NEEDS. *****FREE O... more
6
turning diameter 200 mm turning length 400 mm control Siemens 840 C (C200-4) swing diameter 420 mm Main spindle: bar diameter 42 mm spindle bearing diameter 85 mm chuck diameter max. 130 mm spindle nose ISO 702/1 / 4 turning speed range - spindle max. 6.300 min/-1 drive capacity - spindle motor 100% ED= 7/10/13 kW drive capacity - spindle motor 40% ED= 10/15/21 kW max. Torque 105 Nm C-Axis 0,01 ° Subspindel: bar diameter 42 mm clamping chuck diameter max. 130 mm spindle nose ISO 702/1 / 4... more
4
spindle diameter 100 mm x-travel 1250 mm y-travel 900 mm z-axis 1100 mm W-axis (spindle longitudinal) 630 mm tool taper ISO 50 spindle turning speed range 0 - 1800 U/min table surface area 1120 x 1000 mm table load capacity 3000 kp spindle drive 22 kW feed 4-2700 mm/min total power requirement 50 KVA weight of the machine ca. t dimensions of the machine ca. 0 m retrofitted horizontal boring machine: - CNC control Heidenhain iTNC 530 - restoration of guide lines by milling, grinding and by s... more
5
working width 4,100 mm maximum press force 1,500 KN maximum upright width 3,700 mm outreach C-pillar 300 mm stroke of folding beam 215 mm working speed 6 mm / sec CNC control CYBERLEC DNC 70 Y1-2, X Cm33r9lhm controlled backgauge 600 mm manual crowning divided top tool - universal die electrical data 400 V / 7.5 KW space requirements width - 4,400 x depth - 1,400 x height - 2,700 mm weight approx. 13,400 kg   more
5
Bgbhl7feMaximum turning diameter 380 mm Maximum swing 520 mm Maximum spindle bore for bar work 75 mm Spindle speed 3500 Rpm Maximum turning length 1130 mm Number of tools on turret 10 Tool type VDI 40 CNC control Fanuc 0-Tc more
5
turning diameter:900 mm turning length:4500 mm control:SIEMENS 840 D spindle bore:204 mm spindle turning speed range:10 - 1200 U/min max. workpiece weight between centres:6000 kg max. workpiece weight -without tailstock:750 kg rapid traverse longitudinal:24 m/min W2ou33odw rapid traverse cross:12 m/min total power requirement:150 kW weight of the machine ca.:56 t dimensions of the machine ca.:15 x 4 x 4 m CNC SIEMENS 840 D C-axis 0,002° driven tools, millings spindle HSK 100 automatic toolcha... more
6
STUDER S35 NEW SIEMENS CNC CAN PROFILE WHEELSHAPES-SENSITRON GAP CONTROL, AUTOMATIC WHEELHEAD SWIVEL-LENGTH POSITIONING AT AN ANGLE (WITHOUT NEED TO STRAIGHTEN UP), AUTOMATIC WHEEL BALANCING.... *****FREE OPERATOR TRAINING ON ALL MACHINES SOLD IN NOVEMBER***** BEING REBUILT BY STUDER TRAINED S35 SPECIALIST SERVICE ENGINEER. ADVANTAGES COMPARED TO STUDER S35: CAN PROFILE WHEEL TO ANY SHAPE CAN LENGTH POSITION AT AN ANGLE WITHOUT NEED TO STRAIGHTEN WHEELHEAD DRESS BOTH SIDES OF WHEELS C... more
6
turning diameter 246 mm turning length 600 mm control 840 D powerline Siemens greates pass round over bed 400 mm Swing dia. over traverse guideway 300 mm centre distance 615 mm Main spindle: turning speed range - main spindle max. 6.000 min/-1 power capacity - main spindel 16 kW max. Torque 155 Nm spindle nose 140H5 max. bar capacity 52 mm spindle bearing diameter 100 mm max. chucking diameter 170 mm usable bar diameter 30 mm C-Axis 360 ° Subspindel: Spindle speed range subspindle max. 6.0... more
6
max. wheel diameter 200 mm gear width 230 mm max. module Profilschleifen 10 min. module wälzschleifen 8 grinding head - power requirement 35 kW grinding head - swivable +/- 35 ° grinding wheel speeds 12000 U/min 89tu7c0jy table diameter 140 mm table rotation speed 2000 U/min travel -x axis 230 mm travel -z axis 320 mm feeds 8000 / 10000 mm/min electrics - voltage/frequency 400 / 50 V/Hz total power requirement 35 kVA weight of the machine ca. 16 t dimensions of the machine ca. 5,1 x 3,9 x 3,2... more
3
CNC machining center Microcut MM 400 Year of manufacture 2010 Procedures xyz 450 x 400 x 400 E9dkh9ubu Spindle ISO 40 Max 10.000U RPM The sale is carried out only to entrepreneurs in the sense of § 14 BGB more
3
Standard turning diameter 150 mm Maximum swing 340 mm Emfvzqszo Maximum spindle bore for bar work 80 mm Spindle speed 38 – 3.800 Rpm Number of tools on turret V 12/V 8 Tool type VDI 40 CNC control OSP 7000 L With 4 Axis more
4
turning diameter 575 mm turning length 1527 mm control Fusion 640MT turning diameter over bed slide 470 mm centre height 305 mm spindle motor 22 kW spindle turning speed range 35 - 3300 U/min Cmqar83g chucking diameter 305 mm milling drive 2,2 (100% ED) kW Tools speed 2 - 6000 U/min feed - longitudinal/cross 1 - 10000 mm/min rapid traverse: longitudinal and cross 12000/18000 mm/min max. workpiece weight between centres 1000 kg total power requirement 44 kW weight of the machine ca. 9,8 t dimen... more
6
-----MACHINE ONLY AVAILABLE TO END USER CUSTOMER----- 2003 MACHINE, 500MM EXTERNAL GRINDING WHEEL FOR STRAIGHT OR ANGLE APPROACH GRINDING + INTERNAL SPINDLE WITH FREQUENCY CONVERTOR, AUTOMATIC REBUILT “B” AXIS WITH 1 DEGREE, FANUC 21i CNC WITH EASY PICTOGRAM PROGRAMMING, SENSITRON, LENGTH POSITIONING, REBUILT WORKHEAD AND TAILSTOCK BY STUDER AG FACTORY, 1000MM CENTRE DISTANCE x 175MM CENTRE HEIGHT, *****FREE OPERATOR TRAINING ON ALL MACHINES SOLD IN NOVEMBER***** Gvfolg INSTALLA... more
6
turning diameter max. 33 mm turning length Z1: 120 mm control Fanuc 160 iTB Main spindle: Max. rpm 8.000 min/-1 power capacity - main spindel 7,5 / 5,5 kW slide I: x-travel 1: 65 mm y-travel 1: 350 mm Tooling 6 / 4 pos. fixed tool stations 6 driven statition 4 Subspindle: Max. rpm 8.000 min/-1 power capacity - Sub spindle 5,5 / 3,5 kW slide II: x-travel 2: 265 mm z-travel 2: 320 mm Tooling 2 / 3 pos. fixed tool stations 2 driven statition 3 Slide Y2: Tooling 3 / 2 / 2 pos. outer p... more
4
 Chat starten

CNC Drehamschine Gildemeister MF Sprint 65

Spindle passage: 65 mm Turning diameter: 200 mm Turning length: 500 mm Control: SIEMENS 840 C main spindle power: 21 kW Spindle speeds station 1:25-4500 RPM Spindle speeds Station 2:40-5000 RPM Turret: 1: 8 - fold - 4 powered turret: 2: 8 - fold - 4 powered space requirement approx.: 3.4 x 1.7 x 1.8 m Bahxgpfgmu Machine weight approx.: 5,9 t -Collet Chuck spindle of Max 65 mm -Collet Chuck spindle of 42 mm -Bar loader SIMAG, max. -Rod length 3200 mm; -Diameter of 10-65 mm -5 pie... more
4
max. wheel diameter 1500 mm gear width 1000 mm max. module 25 min. module 1 root circle diameter 50 mm stroke length max. Axial 1000 mm Profile height max. 41 / 60 mm pressure angle ohne Einschränkungen ° L3atx max. helix angle +/- 45 ° grinding wheel diameter 400 mm grinding spindle drive 14 kW grinding spindle speed 4000 U/min cutting speed 30 (50) m/s table diameter 900 mm table load capacity - central/maximum 6000 kp workpiece height max. 2600 mm voltage 460/60 V/Hz total power requiremen... more
3
YmnsxannoMaximum turning diameter 540 mm Maximum swing 540 mm Maximum spindle bore for bar work 51 mm Spindle speed 5.000 Rpm Number of tools on turret 40 Tool type Capto C6 CNC control Mazatrol PC Fusion CNC 640 MT more
4
turning diameter 185 mm turning length 450 mm control ELTROPILOT EPL2 bar material dia. 65 mm cross movement 190 mm feed 5000 mm/min Qw9uxktea rapid traverse 15 m/min spindle turning speed range 25 - 4000 U/min main drive DC 29 kW tool holder -shaft diameter 40 mm total power requirement 35 kW weight of the machine ca. 5,5 t dimensions of the machine ca. m - with CNC control EP 20 - tail stock - bar-loader FMB-TURBO 3000-1700 LMS, - 12 station turret with 6 driven tools - C-axis - bar maga... more
5
Okuma LB 3000 EX MW 500 built in 2007 year of production: 2007 Control: OSP P 200 L spindle hours: 17100 h available from: bearing technical data: Maximum turning length: [mm] 500 Turning diameter: [mm] 340 Spindle bore: [mm] 80 Bar passage: [mm] 70 C-axis: 0.001 ° Number of controlled axes: 5 Speed range: [1/min] 5000 Power: [kW] 30 Tool places: 12 driven tools 12 Performance angetr. Tools [kW] 7.1 speed angetr. Tools 6,000 Spindle speed range: [1/min] 6,000 Procedures: ... more


cnc vtl
every day

New machines via email!

Be informed!

to

to

Change search
CNC VTL
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close