Cnc centre lathe buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
2
Diameter 200mm, little used, dusty, good Zustand.4 bolts with bolt distance about 94mm, hole diameter of the bolt about 133mm, the greatest diameter of the short cone approx 106mm, pull rod in the middle. All information given in good faith but without guarantee. Ie3uuos more
6
Swing over bed: 1010 mm Swing over cross slide: 760 mm Spindle hole: 190 / 104 mm Turning length: 3000 mm Kdakhwan Bed width: 560 mm more
1
Elect./Voltage: 9qngg3kno DOOSAN ""PUMA 2600MS"" TURNING CENTER -- Max. Turning Length: 29.9"" -- Max. Turning Diameter: 14.8"" -- Max. Bar Capacity: 3"" -- Main Spindle Speed: 3,500 RPM -- Sub Spindle Speed: 4,500 RPM -- X-Axis Travel: 10.2"" -- Z-Axis Travel: 32.7"" -- B-Axis Travel: 32.7"" -- Rapid Traverse(X, Y, Z): 1,181 IPM -- Turret Stations: 12 -- OD Tool Size: 1"" x 1"" -- Boring Bar Diameter (Main, Sub): 1.6"", 1""Equipped With: -- Fanuc Contro... more
6
Etht07y9sCNC Lathe AVM ANGELINI OSCAR CNC Lathe AVM ANGELINI OSCAR  control FANUC 21 i-T, R 21 T1 F, 3-jaw chuck 210 mm, max power 20 kw, 4500 rpm spindle speed, turret 12 tools, spindle bar passage 52 mm, with chip conveyor belt, see card in photo card Este slideshow necessita de JavaScript. more
6
turning diameter 700 mm turning length 1500 mm Ebexgsr control Seicos weight of the machine ca. 9 t more
3
turning diameter 300 mm turning length 1500 mm control FanucSystem 6 T total power requirement kW Qnol0mvhv weight of the machine ca. 5 t dimensions of the machine ca. 4x2x1,5 m more
6
Shoot 1CNC vertical turret lathe Type: 16 DSV 125 Gvjqnw Year of manufacture: overhauled 1988/2008 with CNC Siemens 840 d, tool changer, tool head changer, 2-position pallet changer Faceplate diameter: 1250 mm Turning diameter: 1600 mm more
6

CNC Lathe ESCO Escomatic NM 646 Y

Düsseldorf Germany
6383 km
2007
used
Offer
Another 8 days
Weight approx.: 1650 kg Dimensions (l x w x h) approx.: 1400x1580x1650 mm Description: ESCO Escomatic NM 646 Y CNC Lathe made in: Swizerland circuit diagram: 300 - 1501 operating voltage: 400 V / 50 Hz control voltage 24 V/DC light tension: 24 V/ DC rated output: 7.2 kVA nominal current: 10.4 A standard voltage: 3 x 400 V AC frequency: 50/60 Hz power: 8 kVA pressure: 5 bar consumption: 11 m³/h hydraulic system with a tank of 10 l, pump flow : 2.5 l/min, pressure: 70 bar CNC control... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. 9nwsjudgz DOOSAN DAEWOO PUMA 2000SY CNC Turning Center -- Control Fanuc 18iTB. -- Swing over bed 23.6"". -- Swing over carriage 21.6"". -- Max bar capacity 2-5/8"". -- Distance between spindles 33.8"". -- Max cutting diameter 13"". -- Spindle speed (main) 5,000 RPM. -- Spindle speed (sub) 6,000 RPM. -- Spindle motor (main/sub) 20/10 HP. -- X-Axis travel 9.84"". -- Y-Axis travel 4"". -- Z-Axis travel 22.8"". -- Rapid traverse Rates (X/Z) 790... more
Lathe Cnc Okuma LB15 SOLD Torno Cnc Okuma 3 axes X/Z/C Brand : Okuma Model : LB15 11-M 3 axis CNC Lathe. Ano : 1995 Okuma OSP5020L control; 530mm between centers Ezjlooc Torneamento 340mm day x 500mm; Milling ?C?axis; Velocities :  4500 rpm 12 turret stations Tools included in photos              more


cnc centre...
every day

New machines via email!

Be informed!
4
9wkzvovvvSWING OVER mm SWING OVER mm DISTANCE BETWEEN CENTERS………………………5.000 mm CNC FAGOR 8050 more
3
turning diameter 2400 mm turning length 6000 mm control Siemens 880T Turning diameter over slide 1400 spindle diameter 320 mm speed 0.4 - 1000 m/min voltage 380 V 3hg7nf9sd total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
6
Shoot 1CNC vertical turret lathe Type: 16 DSV 125 Year of manufacture: overhauled 1988/2008 with CNC Siemens 840 d, tool changer, tool head changer, 2-position pallet changer Faceplate diameter: 1250 mm Turning diameter: 1600 mm Bbixv73drt more
6

CNC Vertical Lathe GILDEMEISTER CTV 250

Düsseldorf Germany
6383 km
2001
used
Offer
Another 15 days
turning length: 150 mm Gfwlfj9 turning diameter: 130 mm control: SIEMENS Sinumerik 840 D toolchanger positions: 12 number of places for driven tools: 12 spindle bore: 79 mm cross slide - travel: 800 (X) mm longitudinal slide -travel: 300 (Z) mm turning speed range: 10 - 5000 rpm rapid travel range: 45 (Z) / 100 (X) m/min total power requirement: 36 kW Weight approx.: 7000 kg Dimensions (l x w x h) approx.: 6100 x 6500 x 4000 mm Description: GILDEMEISTER CTV 250 CNC Vertical Lathe - comes with ... more
1
Elect./Voltage: 8co7jc7qa FEMCO DURGA 25E CNC LATHE -- Max. Swing 17.75"" -- Max. Turning Diameter 9.8"" -- Max. Turning Length 23.6"" -- Distance Between Centers 25.59"" -- Bar Capacity 2.04"" -- Spindle Nose A2-6 -- Spindle Speed 4800 RPM -- Spindle Motor 20 HP -- No. of Stations 23 -- X-Axis Travel 5"" -- Z-Axis Travel 24.8"" -- Rapid Traverse Rate (X,Z) 470 IPM / 630 IPM -- Quill Travel 3.9 -- Quill Diameter 3 -- Dimensions 83 x 50 x 63 -- Weight [...] With: -- Fanuc O-T ... more
6
turning diameter 270 mm turning length 500 mm control Siemens 840c total power requirement 15 kW weight of the machine ca. 4.3 t dimensions of the machine ca. 2.5 x 1.8 x 2.2 m Baztaguqpj tailstock more
3
turning diameter:*320 mm turning length:600 mm control:SIEMENS powered chuck diameter:200 mm Tool bore:VDI 30 turning diameter over bed slide:160 turning speed range:112 - 5000 U/min spindle bore:42 mm turret (x-stations):12 total power requirement:30 kW 7amicqzal weight of the machine ca.:8,1 t dimensions of the machine ca.:6 x 4 x 2,5 m with CNC SIEMENS 810 T control C-axis, driven tools hydrostatic round guiding in z-axis tailstock chip conveyor, coolant device with extensive accessori... more
6
turning diameter max. 420 mm turning length max. 780 mm control Fanuc turning diameter over bed 600 mm turning diameter over cross slideways 425 mm centre distance 890 mm Main spindle: turning speed range - main spindle 9 - 2.500 min/-1 power capacity - main spindel 22 / 18,5 kW Number of speed ranges 2 spindle bearing diameter 160 mm spindle head JIS A2 -8 chucking diameter - mm turret: number of toolpositions 10 pos. Shank height for square tool 25 mm Drill shank diameter max. 50 mm axi... more
6
CNC lathe 7ppkroenj CNC Siemens 840 D Year 2009 Turning diameter / 1200 in the offset 1900 mm Centre distance 3000 mm Spindle bore 160 Weight Chuck + tailstock 4000 kg Weight Chuck + live + Lynette 7000 kg with bezel without faceplate CNC Siemens 840 D Swing over cross slide 820 mm more
6

CNC Lathe KNUTH STARCHIP 520 RT

Düsseldorf Germany
6383 km
2005
used
Offer
Another 15 days
turning diameter: 350/520 mm control: SIEMENS 802D toolchanger positions: 12 number of places for driven tools: 12 spindle bore: 80 mm cross slide - travel: 280 mm longitudinal slide -travel: 590 mm turning speed range: 35 - 3500 rpm rapid travel range: 12/15 m/min total power requirement: 20,2 kW Weight approx.: 4500 kg Dimensions (l x w x h) approx.: 3100 x 1600 x 1900 mm Description: KNUTH STARCHIP 520 RT CNC Lathe - max. turning diameter over bed: 520 mm - max. turning diameter over suppor... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Cgrkvauw DAEWOO PUMA 8S CNC Lathe -- Max turning diameter 14.2"". -- Max turning length 14.6"". -- Max swing over bed 19.7"". -- Max swing over carriage10.8"". -- X-Axis travels 7.9"". -- Z-Axis travels 15"". -- Spindle speed 50-5000 RPM. -- Spindle motor 20 HP. -- Spindle nose A2-6. -- Spindle bore 2.44"". -- Turret stations 12 . -- Tailstock taper MT#4. -- Machine dimensions 90.5"" x 70.5"" x 67.9 -- Machine weight 8317 [...] with: -... more
6
turning diameter 700 mm turning length 1900 mm control SIEMENS 880T turning diameter over bed slide 440 spindle drive motor 60 kW powered chuck diameter 400 mm spindle turning speed range 25 - 4000 U/min Qxagtrev3 max. torque on the spindle 1780 Nm no. of tools in turret 1 12 no. of tools in turret 2 12 tool taper bore 50 mm weight of tools max. 20 kg tailstock quill stroke 100 mm feeds 1 - 10000 mm/min spindle bore 103 mm total power requirement 78 kW weight of the machine ca. 22,5 t dimen... more
3
CNC Vertical Machining Centre Gantry type Table size 1240 x 550 mm Table NCRT Movement x-Axis 1000 mm y-Axis 508 mm z-Axis 460 mm 4th Axis integrated in Mazatrol M2 Syggnzm7 Number of tools in magazine 30 pieces Maximum spindle speed 3.150 min Tool taper CAT 50 CNC Control Mazatrol M 2 more
5
Manufacturer: Alberti, Type: Index CN, Year: 2000, Vorschub max m/min: 60, Working range X: 3200, Working range Y-axis: 1200, Working range Z: 120, C-Achse: yes, Number of milling spindles: 1, Tool adaption system: SK 30, Milling engine 1 hours power: ca.7.5, [...]: 3000-18000, [...]: 3000-18000, Number of tool magazines: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 20, Bohrer vertikal Y: 10, Horizontal drills-X: 8, Vacuum pumps m³/h: 80, Year :2000 Q9xqua7ld more
6
turning diameter 158 mm turning length 340 mm control Emcotronic TM02 turning speeds 4000 U/min 90bdff00t X- + Z-axis 300-300 weight of the machine ca. 2100 kg more
6

CNC Lathe GILDEMEISTER GDM 90/2A

Düsseldorf Germany
6383 km
1991
used
Offer
Another 15 days
turning diameter: 185 mm toolchanger positions: 12 number of places for driven tools: 12 spindle bore: 104,5 mm cross slide - travel: 190 mm longitudinal slide -travel: 450 mm turning speed range: 80 - 4000 rpm rapid travel range: 5 m/min total power requirement: 42,5 kW Weight approx.: 5300 kg Dimensions (l x w x h) approx.: 3900 x 2700 x 1800 mm Description: GILDEMEISTER GDM 90/2A CNC Lathe - comes with SAMECA SAM 100 bar loader (YOM: 1991) - comes with coolant system - chuck diameter: 250 ... more
1
Elect./Voltage: Fwauthboi DOOSAN PUMA 2000Y CNC Turning Center -- Swing 23.6"". -- Turning diameter 13"". -- Centers distance 20.1"". -- Bar capacity 2.65"" . -- X-Axis travels 10"" . -- Z-Axis travel 22.8"". -- Y-Axis travels 4"" . -- C-Axis index 0.001°. -- Rapid traverse (X/Z) 790 IPM. -- Rapid traverse (Y) 295 IPM. -- Spindle speed 4,500 RPM. -- Spindle motor 20 HP. -- Spindle nose A2-6. -- Tailstock. -- Turret stations 24. -- Live milling. -- Live milling 7.5 H... more
3
turning diameter 240 mm turning length 600 mm control SIEMENS 880 greates pass round over bed 450 mm x-travel 190 mm z-travel 635 mm U-axis 150 mm w-axis 540 mm spindle bore 53 mm bar material dia. 42 mm main spindle speeds: 50 - 5000 rapid travel - longitudinal/face 20 / 10 m/min main drive motor 18,5 kW total power requirement 48 kW weight of the machine ca. 6,5 t Ht8m7c928 dimensions of the machine ca. m double spindle turning centre with C-axis for mainspindle (3° indexing) and for c... more
2
Table size 1460 x 510 mm Movement x-Axis 1120 mm y-Axis 510 mm z-Axis 510 mm Number of tools in magazine 24 pieces Ba2xdu2hh0 Maximum spindle speed 40-7000 1/min Tool taper CAT 40 CNC control Mazatrol M-Plus more
3
turning diameter 160 mm turning length 500 mm control Sinumerik 820 T Siemens greates pass round over bed 400 mm Swing dia. over traverse guideway 220 mm Main spindle: Max. rpm 5.000 min/-1 power capacity - main spindel 23 kW spindle bore 51 mm usable bar diameter max. 42 mm chucking diameter 160 mm spindle head DIN 55026-B / 5 turret: number of toolpositions 12 pos. Shank diameter VDI 3425 / 30 mm Shank diameter 20 x 20 mm Tailstock: tailstock adjustment 450 mm quill stroke 50 mm tensio... more
6
faceplate diameter 1250 mm swing diameter 1500 mm turning height 900 mm turning speeds 300 U/min The machine was reconditioned extensively by TOS Hulin in 2001. Baks8ac8io - Siemens 840 C Powerline - Tool magazine with 15 layers - 3-jaw hydraulical clamping chuck, various tool holders - Additional coolant aggregate for the table more
6

CNC Lathe HANWHA HL-200 MS

Düsseldorf Germany
6383 km
2003
used
Offer
Another 14 days
Weight approx.: 5000 kg Dimensions (l x w x h) approx.: 2800 x 1950 x 1800 mm Bbifnqklak Description: Main spindle power 11/15 KW, speed 40 - 4000 rpm, hole diameter 73 mm, tool-holder head with 12 positions, 6 motorized positions, secondary spindle size 6 ', maximum working diameter 290 mm, maximum bar diameter 60 mm, lathe not used in the last 4 years, 1 year warranty on the FANUC control by the seller In Online Auction with approx. 142 further Machine Tools and other Assets! Bidding ends: T... more
1
Elect./Voltage: J3eqgzmz Doosan PUMA 2500LSY Turning Center -- Max. swing over bed 23.6"". -- Max. swing over carriage 21.6"". -- Max. turning diameter 13.0"". -- Max. cutting length 29.5"". -- X-Axis travel 9.8"". -- Z-Axis travel 32.6"". -- Y-Axis travel 2"". -- X-Axis rapid traverse rate 945 IPM. -- Z-Axis rapid traverse rate 1181 IPM. -- Main spindle speed 3,500 RPM. -- Main spindle motor 25 HP. -- Main spindle nose A2-8. -- Main spindle bar capacity 2.99"" (76 mm). -- Main... more
6
turning diameter 590 mm turning length 700 mm control SIEMENS 840D slide travel in the X-direction max. 215 mm slide travel of turret 1 in Z-direction 645 mm spindle motor 43 kW Torque 275 Nm spindle turning speed range 2 - 3500 U/min work piece power 9,4 kW toolpiece turning speed range 10 - 6000 U/min c-axis 0,001 ° Vqmyga number of driven tools 10 tool taper Schaft 40 spindle diameter in front bearing 140 mm spindle passage 90 mm total power requirement 72 kW weight of the machine ca. 11 t... more
2
Table size 1460 x 510 mm Movement x-Axis 1120 mm y-Axis 510 mm z-Axis 510 mm Number of tools in magazine 24 pieces 3zaes9tid Maximum spindle speed 40-7000 1/min Tool taper CAT 40 CNC control Mazatrol M-Plus more
5
turning diameter:510 mm turning length:2500 mm control:SINUMERIK 840D Woktyge8j cross movement:275 mm turning diameter over bed slide:340 mm distance spindlehead / turret head:2185 mm longitudinal movement of bed slide:2111 mm Range of spindle speeds:27- 2600 U/min Rpm Diameter of the spindle bore:76 mm Range of feeds:0- 8.000 mm/ min Feed torque:13 mN turret (x-stations):8 tailstock quill stroke:100 mm tailstock quill diameter:110 mm Main spindle capacity:26 kW Capacity of the spindle motor:... more
2

CNC lathe Weiler DZ 26 mit Stangenlader

Marsberg Germany
6504 km
1995
defective spare-parts repository (used)
Built in 1995 Type DC26 V4 Speed range 50-8000 RPM Pocket revolver 12 Control Siemens Sinumerik Turning diameter of 90 mm Spindle passage 26 mm F9wm2krnu Turning length of 160 mm Bar loader FMB Turbo 5-42 software problem more
6

CNC Lathe ESCO Escomatic NM 647 Plus

Düsseldorf Germany
6383 km
2000
used
Offer
Another 8 days
control: Siemens Weight approx.: 1380 kg Dimensions (l x w x h) approx.: 3559 x 1235 x 1600 mm Description: ESCO Escomatic NM 647 Plus CNC lathe serial number: 304 0664 CNC control: Fanuc 18i 2 channels max. straightening stroke: 70 mm speed of rotation of rotary straightening device: 1500 rpm feed: stroke 65 mm, material feed rate via Z-axis tool holder: passage diameter 6.35 mm max. speed of tool holder: 12000 rpm number of swivelling tools: 4 tool travel: 3.5 mm Frontal machinin... more
1
Elect./Voltage: Bbiuy8nih2 DOOSAN DAEWOO PUMA 2500 LSY Multi Axis Mill & Turn Center -- Swing over bed 23.6"". -- Swing over carriage 21.6"". -- Maximum bar capacity 3"". -- Maximum turning diameter (main spindle) 13"". -- Distance between main & sub spindle nose 43.7"". -- Main spindle chuck size 10"". -- Spindle speed 35 - 3500 RPM. -- Spindle bore diameter 3.4"". -- Spindle motor 30 HP. -- Maximum spindle torque 319 ft/lb. -- Main spindle C-Axis. -- Rapid traverse rate: 2... more
2
turning diameter 370 mm 3qdai3kp turning length 400 mm control Philips weight of the machine ca. 3 t more
5
Ub0lvvqtwith palletech Table size 800 x 800 mm Table NCRT Number of pallets 14 Movement x-Axis 1300 mm y-Axis 1100 mm z-Axis 1000 mm Table indexing 0,001° Number of tools in magazine 237 pieces Maximum spindle speed 35-7.000 min Tool taper DIN 69871A-50 CNC control M-plus more
6
WORKSPACE Spindle passage 41 mm Bar passage 32 mm Chuck 140 mm Spindle nose Gr. 5 Circular diameter 240 mm Spindle hight above floor 1100 mm LINEAR TOOL SYSTEM Longitudinal travel with Chuck Z-max. 350mm Plan travel x-max 250 mm Turning diameter over linear plate 50 mm Longitudinal travel with support tailstock 325 mm AUTOMATIC 4-POSITION TOOL TURRET QUICK-CHANGE HOLDER MULTIFIX GR. B HAND REVOLVER READY GR. 1 FEED DRIVE Rapid traverse x and Z-axis 5000 mm / min Feed x and Z axis 4000mm / min ... more
5
Manufactor: Wohlenberg. Cip7p7by Made: Unknown / Modernised 2009. Cnc kontroll: Fagor 8055 TC. Turning length: 10 meter. Max swing: 920 mm. Over saddle: 530 mm. Max spindle speed: 700 rpm. 2-step gearbox. Modernised 2009 with new electric, electric cabinet, motors and FAGOR 8055 TC. Width of machine: 2.8 m. Length: 13,9 m + 2,5 m with chipconveyer. Extra: Chipconveyer. 3x steadyrests. 1x bracket for following rest. 2x toolholders. The machine is in very good condition and can be inspected und... more
6

CNC Machining Centre HOLZTECH Evo

Düsseldorf Germany
6383 km
2013
used
Offer
Another 1 days
Dimensions (l x w x h) approx.: 6300 x 5000 x 2000 mm Weight approx.: 5100 kg Description: HOLZTECH Evo CNC Machining Center - Range of the axes: X 3200 mm - Y 1300 mm - Z 250 mm - Drilling unit: 19 vertical drill spindles - 6 horizontal drill spindles - integrated saw diameter 125 mm in X - Milling motor 10 hp - Reference estimates in X direction 6 pieces - Double zero point estimates 6 pieces - Lateral estimates in Y direction 4 pieces Ba7kky8gdw - 4 plate filters - Vacuum pump 90 m... more
1
Elect./Voltage: Fbhjzirdy FRYER ET-21 CNC Flat Bed LatheSpecifications: -- Swing Over Bed 21"" -- Swing Over Cross Slide 12"" -- Distance Between Centers 40"" -- Width of Bed 14"" -- X-Axis Cross Travel 12.0"" -- Z-Axis Carriage Travel 37"" -- Spindle Bore 3.4"" -- Rapid Traverse X & Z -Axis 400 IPM -- Axis Thrust 3,058 - X / 3,504 - Z -- Spindle RPM (2-spd auto shift) 50 - 300 / 300 - 2,000 RPM -- Turret Positions 4 position power -- Spindle Nose D1-8 -- Tailstock Quill Diameter... more
4
turning diameter:510 mm Sspouw turning length:1350 mm control:Style CNC turning diameter over slide:300 mm bed width:330 mm max. weight of workpiece set on faceplate:1000 kg max. turning weight [...] w/o steady:600 (750kg mit schweren Reitstock) kg feed speeds:0,01-1000 mm/min spindle bore:80 / 102 mm spindle taper:D1-8 / D1-8 spindle speed max.:Getriebe: 2500 (80) / 2100 (102) U/min quill stroke:160 mm pinole diameter:75 mm total power requirement:16 kW weight of the machine ca.:2,7 t dimens... more
4
Table size 1000 x 1000 mm Number of pallets 2 Movement x-Axis 2000 mm 7clejphx y-Axis 1120 mm z-Axis 1250 mm Table index 0,0001° Number of tools in magazine 90 pieces Spindle speed 20-4500 min Tool taper MAS BT-50 CNC Control Tosnuc 600 MB more
1
TECHNICAL DETAILS, spindle speed : 200 – 6 000 [rpm], spindle power : 11.7 [KW], spindle boring : 25.4 [mm], part-holder headstock stroke : 400 [mm], tool-holders slide strokes X x Z : 385 x 220 [mm], C axis (360 000 positions), tools number : 8, cooling tank : 300 [l], pump : flow 150 [l/min], dimensions : 2 200 x 2 020 x 2 230 [mm], EQUIPMENT, CNC control NUM 570, turning tool-holders, pneumatical clamping, Various boring and milling quills, cooling tank with pump, number of hours under pow... more
1
Max swing diameter: 300 mm maximum turning diameter: 160 mm maximum turning length: 250 mm Main spindle: Speed range: 60-6,000 rpm Main drive power: 5.5 KW Turret: Special version: 12 Procedures: D9o7m7 Revolver - travel: x axis: 100 mm z axis: 290 mm Travel speed: Rapid traverse: x/z - axis: 30 m / min Feed range: 0-5,000 mm / min Machine data: Total connected load: 22.4 KVA Machine weight: 2,700 kg Machine dimensions: L x W x H: approx. 1.86 x 1,30 x 1.75 m plus bar load... more
6

CNC Lathe GILDEMEISTER NEF CT 40

Düsseldorf Germany
6383 km
1987
used
Offer
Another 1 days
turning length: 600 mm turning diameter: 400 mm control: Eltro Pilot toolchanger positions: 12 spindle bore: 38 mm cross slide - travel: 260 mm longitudinal slide -travel: 640 mm turning speed range: 20 - 4000 rpm total power requirement: 22 kW Weight approx.: 3800 kg Dimensions (l x w x h) approx.: 3200 x 1800 x 1800 mm Description: GILDEMEISTER NEF CT 40 CNC Lathe Loading a. unloading arrangement, launch hatch Machine is without tailstock Hjox7v9 In Online Auction with approx. 143 further ... more


cnc centre...
every day

New machines via email!

Be informed!

to

to

Change search
CNC CENTRE LATHE
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close