Used Heavy Duty Cnc Lathe for sale (15,504)

Condition: ready for operation (used), Year of construction: 1997, Available immediately from site: CNC heavy-duty lathe Bohringer VDF Type 16 M Year of manufacture: 1997 Sinumerik 840 C Swing over bed: 520 mm Swing over cross slide: 285 mm Turning length: 1000 mm 2 turrets with 12 stations each Lower turret: 12 stations, 6 driven, 4 kW, speeds up to 6,000 rpm Dedpfx Agjxlzv Iorscn Upper turret: 12 stations, 6 driven, 4 kW, speeds up to 6,000 rpm NC-controlled tailstock C axis for main spindle Power chuck, 200 mm diameter Spindle bore: 78 mm Drive power: 53 kW Chip conveyor Offered at: EUR 9,750.— plus VAT, ex location

Year of construction: 2019, condition: ready for operation (used), A Klaaßen CNC heavy machining center is available. Turning diameter: 1500mm, center distance: 4500mm, chuck diameter: 1000mm, through-hole: 190mm, travel Y: 340mm. Machine dimensions X/Y/Z: approx. 7800mm/2900mm/2200mm, total machine weight: approx. 40000kg, control: Siemens Sinumerik 840D sl with ShopTurn, operating hours: 3092h. Including extensive accessories. Documentation available. On-site inspection is possible. Djdpfx Aewkuzdogrjcn

Condition: refurbished (used), Centre height 1000 mm Swing over bed 2000 mm Turning diameter 1600 mm Turning length 10 000 mm Spindle bore  105 mm Main power motor 71 kW Maximum torque of the spindle 40 000 Nm Chuck plate dia.  1600 mm Tooling system : tool turret or double-shelf toolholder - to be agreed Control system : Sinumerik 840 D sl Number of spindle speeds 3 Spindle speed ranges 250 rpm ( for the chuck dia. 1600) Longitundial / cross rapid traverse 4000 mm Tailstock quill dia.  280 mm Tailstock quill travel 200 mm Load carrying capacity : max. weight of workpiece in centers: 30,000 kg max. weight of workpiece in centers with one steady rest 35,000 kg two steady rests 40, 000 kg Lathe dimensions and weight : height 2400 mm width 3000 mm length 15700 mm ( turning lengh + 5700 mm) weight of the lathe TCF200 x 10 m : 46,000 kg Dedpfx Agen Up R Sjrjcn Scope of overahul : The lathe TCF 200 x 10m totally disassembled for the overhaul. Bed and carriage guideways are ground and matching surfaces lined with antifriction material. Headstock and tailstock – replacement of all used parts ( all new bearings ). Carriage – replacement of all used parts and installation a new ball screw for X axis drive Drive system for Z axis - REDEX /brand new/; Installation of the new CNC system Sinumerik 840 D sl with PLC program; Installation of the new feed drives from Siemns with power 50 Nm Installation of the new control cabinet and control panels; New wiring/ cables and all electrical equipment; New painting and new geometry as per ISO 1708

Condition: excellent (used), Year of construction: 1989, Weisser Heilbronn GIGANT CNC Lathe 1989 Control: Heidenhain Turning diameter over bed: 1400 mm Turning diameter at faceplate: 1200 mm Turning diameter over cross slide: 1080 mm Max. turning length: 1300 mm Spindle motor: 45 kW Dsdpewmnqwjfx Agrjcn Accessories: Faceplate, jaws, tool holder, chip conveyor, documentation

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Dodpjv I T Ewjfx Agrocn Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: good (used), Year of construction: 2003, Daewoo Heavy Puma 600 CNC Turning Centre with Fanuc Series 18i-T CNC Control, Chuck size 610mm, X axis 900mm, Z axis 1575mm, Spindle speed 1400rpm, 12 Station Turret and programmable Tailstock, Mills Swarf and Coolant Conveyor System, Machine weight 16100 kgs, fitted with Tool Presetter. S/No. PM600042 (2003) Dodowvbubopfx Agrjcn

Condition: new, Year of construction: 2025, CNC control Fagor or Siemens delivery time approx 4-5 month Including normal equipment: - electrical equipment 24/230/400V german fabrication (CE-Norm) - machine lamp 24Volt - cooling unit - steel holder, 4-fold, incl. upper support - 4-chuck faceplate 1000mm - Savety housing - central lubrication SKF/Vogel -1 set technical documentation, including: -- Operating manual -- circuit diagramm Djdpfx Agjdag Svjrocn -- programming manual -- decleration of conformity (CE) - machine painting combination RAL 7035 and RAL 5015 Technical specifications Workpiece diameter over bed: 1000mm Working diameter over bed:1000 mm Working diameter over support: 650mm length between centers: 5000mm Max. weight of workpiece, withoit steady rest: 8000 kg Spindle head DIN 55026: Gr.15 spindle bore: 128mm Spindle inside cone(metrisch): 140 Performance of main drive: 22/30* kW spindle speed: 5-500U/min Turning speed steps (manual / stepless within steps): 24 max. spindle torque:9500Nm Machine dimensions: Length: 8200mm Width: 2400mm Height: 2000mm Weight: 15750kg * option

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Dcedpfx Agjwhylvorjn Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: used, turning diameter 3.200 mm turning diameter modified: 2.400 mm turning diameter over slide 3.000 mm turning length max. 15.000 mm control Sinumerik 840 D Siemens workpiece weight max. 80.000 kg work accuracy (up to) 0,01 mm turning speed range - main spindle max. 50 min/-1 weight of the machine ca. 154,4 t dimensions of the machine ca. 20,7 x 6,0 m Heavy Duty Lathe ZERBST - DXP 5 / W15x15000 - measurement precision: < 0,01 mm Dcodpewtrz Hefx Agrsn Retrofit 2009 / 2012: - 2009: Control system upgrade to Sinumerik 840D - 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technology

Condition: ready for operation (used), total height: 3,340 mm, total length: 4,500 mm, throat depth: 660 mm, total depth: 1,950 mm, Type: ALLEEN 660x700 ACN Robuuste dubbelkoloms lintzaag, specifiek voor hooggelegeerde staalsoorten CNC-touchbediening met zaagparameters voor diverse soorten hooggelegeerde staalsoorten dop rond: dia 660 mm kap vierkant: 660 x 700 mm bundelkap: 555 x 700 mm automatische voeding met slag van 500 mm (met onbeperkte herpositionering) zaagvermogen: 18,5 kW de invoer- en zaagsnelheid zijn frequentiegestuurd vergrote hoogte van het zaagblad: 67 mm spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor het uitlijnen van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor het uitlijnen van het werkstuk - maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rol is 4 ton - 4 meter uitvoerrollenbaan: Dcsdjxczqtspfx Agrsn één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 700 mm Sawspeed: 10 > 120 m/min Length of band saw: 8660 x 67 x 1,6 mm Power needed: 27 kW (58 amp) Weight: 8,5 ton (only machine)

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Heavy-duty lathe VDF Heidenreich & Harbeck Type Hamburg 840 Year of manufacture: 1977 Dcsdpfjxld Exjx Agren Centre height: 420 mm Swing over bed: 840 mm Distance between centres: 1000 mm Spindle bore: 127 mm Longitudinal feeds: 0.08 – 2.8 mm/rev Cross feeds: 0.04 – 1.4 mm/rev Spindle speed: 1 – 1400 rpm Drive: 11 kW Included equipment: - Chuck - Tailstock - Quick-change toolholder - Drill holder attachment - Machine feet Weight: 6500 kg Price: EUR 5,750 plus VAT, ex location

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Dcodjxddvnopfx Agrsn Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Mounting in roller blocks: 1000 - 2250 mm Mounting in roller steady rests: 300 - 1100 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. A base for sliding jaw steady rests for the 3401 cylindrical grinding machine. 125 kg auxiliary crane on spindle box.

Condition: used, Technical details: turning diameter over bed: 800 mm turning diameter over support: 530 mm Dodpov Uzn Tsfx Agrscn centre distance: 1250 mm turning diameter in the gap: 900 mm center height over support: 530 mm turning length: 1800 mm center height over bed: 395 mm spindle bore: 82 mm revolution per minute: max.900 U/min force of feed longitudinal: 25000 N bed width: 710 mm weight of the machine ca.: 6,5 t dimensions L x W x H: 4,01 x1,9 x 1,52 m Lathe chuck with 500mm 3-jaws/soft jaws Longitudinal feed in steps of 60 Thread feed metric/inch/pitch thread Tool holder MK6 Accessories: Steady rest diameter 500mmm closed Steady rest diameter 300mmm closed without attachment Multifix mountings *

Condition: ready for operation (used), Year of construction: 1961, Manufacturer: WMW NILES lathe DLZ 630 Condition: used Dedjdwfdfepfx Agrjcn Turning diameter over bed: 630 mm Feed: quer: 0,018-1,25 mm/U Hollow: 70 mm Centre height: 290 mm Spindle speed: 22,5 – 1120 / 18 step U/min Turning length: 2000 mm Total power requirement: 15,0 kW Turning diameter over bed: 630 mm Weight of the machine ca.: 4,2 t Transport dimensions lxwxh: 4,5×1,35×1,5 m Turning diameter over slide: 340 mm If you need more information. We are here to help! Please contact us via the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2005, turning diameter over bed 935 mm turning dia. over face-slide 600 mm greates pass round over bed 1.600 mm turning length 2.000 / 3.000 mm control 810D / Manual Turn Siemens centre height 475 mm max. workpiece weight between centers 6.000 kg turning speed range - main spindle 10 - 1.100 min/-1 transmission ratio 4 power capacity - main spindel 37 kW max. Torque 8.000 Nm spindle diameter in front bearing 190 mm spindle bore 155 mm type Parat 4 pos. RD 4 number of cross-slides 1 x-axis 850 mm z-axis ca. 2.100 mm quill stroke 300 mm diameter of quill 140 mm capture MK 6 rapid speed X: 8 m/min rapid speed Z: 6 m/min weight of the machine ca. 10,5 t dimensions of the machine ca. 8,00 x 2,30 x 4,00 m Dodpfow Spbmex Agrscn Semi-frontal Lathe KREWEMA - HFDM 45 475 x 2000/3000

Condition: ready for operation (used), Year of construction: 2009, Seiger SLZ 1000 cycle lathe year of construction 2009 center distance 3000mm Circulation over bed 1010 Circulation over facing slide 650 Drive at 100% ED 37KW at 60/ ED 52KW max. torque approx. 9000NM Speed 5-900rpm X Feed force max 240000N Dcedpju T Dryofx Agrjn Z feed force max 16000N Control Heidenhain Manual Turn with faceplate and steady rest The offer is aimed exclusively at traders within the meaning of §14 BGB

Year of construction: 2012, condition: excellent (used), Type of CNC HURCO ULTIMAX Turning length 483 mm Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Max workpiece weight kg Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Dcjdpfx Aepiay Segrsn Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Tailstock

Condition: used, turning diameter over bed 2000 mm turning diameter over slide rest 1700 mm turning length 10000 mm control SIEMENS Sinumerik 820 T power capacity 110 kW faceplate diameter 1950 mm turning speeds 1 - 140 U/min max. workpiece weight 70000 kg dia. of quill 450 mm Technical data Working range Maximum turning diameter over support: 1700 mm Maximum turning diameter over bed: 2000 mm Maximum turning length: 10000 mm Clamping diameter in the headstock faceplate: 400 - 1700 mm Mounting in roller block, see conversion instructions: 800 - 1400 mm Mounting in steady rests: Small steady rest with cap: 170 - 550 mm Large steady rest with cap: 500 - 825 mm Maximum workpiece weight between centres: 70,000 kg Main drive, faceplate Faceplate diameter: 1950 mm Faceplate speeds: 1 - 140 rpm Drive power of main motor: 110 kW Support Faceplate travel: 1000 mm Faceplate 80 mm / 35 mm wide 6 x detent points at 71 mm Heavy-duty cutting and BTS system Quick adjustment, longitudinal: mm/min Quick adjustment, horizontal: mm/min Feed rates continuously adjustable, longitudinal: mm/min Infinitely adjustable feed rates, cross: mm/min Tailstock Quill diameter: 450 mm Quill adjustment range: 225 mm Centre point angle: 70° Special equipment Dodpfxsxc Ny No Agrscn Control: Sinumerik 820 T Tailstock faceplate Tailstock clamping system (700–1400 mm diameter) Roller block Boring device

Condition: like new (used), MACHINE DATA TORNI TACCHI FTC model 51 OVERALL DIMENSIONS Center distance 4000 m/m Height 1550 m/m Width 1400 m/m Length 6200 m/m Weight 10.000 Kg Swing over bed 1120 m/m Swing over carriage 810 m/m Swing over gap 1350 m/m Hole through spindle 123 m/m Number of speeds 18 Range of speeds 7-550 / 1’ Horsepower of motor 25HP Morse taper № 6 Metric threads – inch – module – pitch 3 jaw chuck 450 m/m Face plate 850 m/m Dodpfxsd Tm D Ej Agrocn Extra face plate 1420 m/m Good condition

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m. Dedotp Dhpopfx Agrocn  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: used, Technical details: turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm revolution per minute: 3,5...1000/ 4 steps U/min feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm Dodpfxsu Ix Rpe Agrocn - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Condition: excellent (used), Technical Data H.PUNCHES MM.482 D.PUNCHES MM. 14000 DIAM.TORN. GUIDES MM.965 CARRIAGE TURNING DIAMETER MM.685 RPM 375 MAND. DIAM.MM.155 BENCH WIDTH MM.1065 ENGINE POWER KW.44,72 APP. KG.33.300 Non-binding data to be verified / Data must be verified Standard equipment PLATEAU 4 JAWS IND.DIAM. MM.905 COUNTER-POINT TOOL TURRET Dcjdjg Anh Ujpfx Agrsn N.2 BEZELS DIAM.MM. 975 CAD N.1 BEZEL COPYRIGHT

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2270 mm turning length 12000 mm control SIEMENS Sinumerik 820 T power capacity 185 kW faceplate diameter 1850 mm turning speeds 1,6 - 175 U/min max. workpiece weight 70000 kg Technical data Working range Maximum turning diameter over support: 2270 mm Maximum swing diameter over bed: 2400 mm Maximum turning length with 30 mm slide: 12000 mm with 80 mm slide: 11,500 mm Dodpoxc Ny Aefx Agrscn Clamping diameter in the headstock faceplate: 300 - 2,040 mm Clamping diameter in the tailstock faceplate: 300 - 1,300 mm Mounting in roller blocks: 1000 - 1750 mm Load capacity: 35 t Mounting in roller steady rests: 800 - 1100 mm Load capacity: 30 t Mounting in roller steady rests of M0911: 300 - 1100 mm Maximum workpiece weight: 70,000 kg Main drive, faceplate Faceplate diameter: 2,200 mm Faceplate speeds, infinitely variable in 4 stages: 1.6 - 175 rpm Maximum torque at rated speed: 220,000 N·m Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of upper support: 735 mm Travel of plunge slide, 35 mm wide: 720 mm Travel of the face slide, 80 mm wide: 720 mm The slides can be adjusted continuously Rapid traverse, longitudinal: mm/min Rapid traverse, face: mm/min Feed rates, continuous, longitudinal: 0.05 - mm/min Stepless feed, face: 0.05 - mm/min Max. cutting force at support: 200000 N Face slide: Heavy-duty machining and BTS system Tailstock Diameter of faceplate (removable): 1850 mm Clamping diameter of faceplate: 1300 mm Flange centre point angle: 70° Quick adjustment: 2000 mm/min Special equipment Sinumerik 820 T control Slider measuring system Boring holder with boring bar holder ø 300 mm

Condition: used, Year of construction: 1973, turning diameter over bed 2235 mm turning diameter over slide rest 2997 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm Dedpfxjt Ei Hue Agrscn 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: new, Year of construction: 2024, turning diameter over cross slide: 690 mm, spindle bore: 155 mm, turning diameter: 1,090 mm, turning diameter over bed slide: 1,000 mm, center height: 500 mm, center width: 700 mm, turning length: 6,000 mm, bed width: 700 mm, rotational speed (max.): 1,000 rpm, Equipment: rotational speed infinitely variable, Heavy-duty lathe with infinitely variable speed control in 4 ranges. Digital position indicator / digital measuring device with constant cutting speed control - High motor power of the main drive 30 kW in standard version (applicable in the range from 5 - 1000 rpm) - Rigid main spindle with 132 mm bore - Bed width 700 mm - Prismatic guide, rigid cross slide Accuracy according to DIN 8607 - Rigid main spindle: TUS 800 /100/1250 with 155 mm spindle bore, mounted in precision bearings Manufacture: FAG or SKF Spindle holder according to DIN 55027/15 - Hardened guideways 48 +/-2 HRC - Locked chuck guard (max. TUS 800 = 760 mm, TUS 1000 = 960 mm, TUS 1250 = 960 mm) Rear, continuous chip splash guard - Moving front chip guard - Jogging gear for main spindle - Closed feed box of rigid design with sliding wheel blocks on splined shafts - Central lubrication for bed slide and facing slide Dcodpfx Ajugwrgogron - Central lubrication for headstock and feed box - Feed rates, metric and inch threads without wheel change - Rapid traverse lengthwise, crosswise and in top support - Safety shutdown of the handwheel on the bed slide or the hand crank on the cross slide during rapid traverse movement - Feed direction change on the bed slide and also on the headstock - Quick-change tool holder model D1 Scale ring on the bed slide and tailstock handwheel - Scaling on the tailstock quill 2-stage tailstock quill/ with gear ratio 1:1 and 1:4 - Electrically adjustable tailstock Support for lead and feed spindles from 2000 mm SW - CE and declaration of conformity