9
General Data
Measurements width 1530 mm
Measurements depth 1170 mm
Measurements height 2210 mm
Machine weight 601 kg
Media
Power consumption 2250 W
This Stratasys Fortus 380MC 3D printer was manufactured in 2015. It has a current INTEL processor. Its screen resolution is 1280 x 1024 mm. The printer has a hard disk with a virtual main memory of at least 1 GB.
Application Types
Gj3fyrpgy
3DPrinting
1
HP 3D Jet Fusion 4200 3D Printer (demo system)
incl. accessories
incl. Processing Staion
Blwggzrqj8
incl. 2x Build Unit
optional with maintenance contract (Care Pack) on printer, processing station, build units
Offer on request
6
Here we offer an Eos sieve system and unpacking device.
Unpacking station: 1.190 mm x 620 mm x 1.500 mm
Power: 3x230/400V+N+PE 50Hz
Connected load: 500VA
Fuse protection: max. 3x16A
type: Schinke EOS sieve system+unpacking device
Condition: used / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, details are reserved!)
Ghudcewe3
Further questions we can answer on the phone for you.
12
Laser printer for plastics FARSOON eForm 3D built in 2017. The printer is offered with complete equipment for preparing powder and cleaning prints. The equipment was used to a small extent for about 12 months, it worked for about 2000 hours. The device operated in a gas shield from a cylinder.
Complete with printer: 8 nitrogen regulators.
Technical data of the FARSOON eForm 3D printer:
- open control software: any modification of printing parameters
- laser type: CO₂
- laser power: 30 W
- dime...
1
Print Mode: High Definition (HD), High Speed (HS), Ultra High Definition (UHD), Xtreme High Definition (XHD)
Net Size (xyz): 298 x 185 x 203 mm (11,75 x 7,3 x 8‘‘)
Gippifsqy
Resolution: HD-Modus: 375 x 375 x 790 DPI (xyz); 32μ-Schichten; UHD-Modus: 750 x 750 x 890 DPI (xyz);
29μ-Schichten; XHD-Modus: 750 x 750 x 1600 DPI (xyz); 16μ-Schichten; HS-Modus: 375 x 375 x 790 DPI (xyz);
32μ-Schichten
VisiJet-Materials: partial materials: VisiJet® X, VisiJet® Crystal, VisiJet® Proplast (Natur), VisiJet®...
8
Prismlab RP400
Building Technology SLA
Exposure Technology Overhead type LCD
Material Liquid resin
Building Dimension 384*216*380mm
XY Precision 100/67/50µm
Z Precision 100/50µm
Building Speed 1000G/Hr
Gdb3dioki
Working Temperature 18-28℃
Relative Humidity
9
General Data
Measurements width 297 mm
Measurements depth 210 mm
Measurements height 200 mm
Injection Unit
Heating capacity 150 ° C (AR-G1H) / 200 ° C (AR-G1L)
Media
Ambient temperature 100 ° C
This KEYENCE Agilista-3200W 3D printer was built in 2016 in Germany. This machine works with a wall thicknesses from 0.2 mm, building material with good transparency. It makes very precise components without distortion at a good production speed.
Application Types
O8d8f
3DPrinting
1
HP JF 580 3D Printer
excl. maintenance contract (Care Pack)
incl. accessories
optional with maintenance contract (Care Pack)
incl. accessories
Bgzdssce
Offer on request
12
Here we offer an Eos EOSINT plastic laser-sintering system.
The following things are included in the EOS P380 system
Construction space container
Powder hopper
Overflow container
Cooler: Termo TEK Termochiller type: P411-12448-1
3DM 8 zones process chamber heating 250°C
Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin
350mm x 350mm x 610mm
Voltage 3/N/PE/ 400V AC
Frequency 50 Hz
Connected load 8 kW
Fuse protection 32 A
MAX. Laser power 100 W
Laser class open 4
Ihklxp...
15
n this offer you acquire a used RealWax 3D printer from 3D Systems "ProJet® 3500 CPXMax".
Item for sale:
1 x ProJet® 3500 CPXMax with the following equipment: -incl. Projet Finisher melt-out oven
Build Hours: approx. 1.178 hrs*
Condition:
This is a used machine and may show signs of use (minor scratches or yellowing).
(minor scratches or yellowing). -The unit has been tested for function
-A test printout can be seen in the photo
Ewimku9oi
-Sold as seen in the photos
-The 3D printer ...
Metal 3D printer
Laser Type / Power: Yb Fibre Laser / 250 W
Wavelength: 1070 nm
Lens: Precision F-Theta Lens
Building Volume: Ø 100 mm x 100 mm
Reservoir Volume: Ø 110 mm x 200 mm
Coater: Rotation led precision coater
Gas Connection: Argon/Nitrogen
Layer Thickness: 20 – 100 μm
Scan Speed: Jog 20 m/s, Operation 6 m/s
Wroredlz
Spot Size: min. 40 μm
Machine Opening: 450 x 180 mm
2
3D Systems Projet 3510 HD Plus 3D Printer
Btscojuxtt
3
General Data
Measurements width 1295 mm
Measurements depth 902 mm
Measurements height 1984 mm
Machine weight 680 kg
Dudavjhr
Movement
X-Axis Movement 406 mm
Y-Axis Movement 355 mm
Z-Axis Movement 406 mm
This Stratasys Fortus 450MC 3D Printer was made in 2016 in the United States and has been working for only 2000 hours. This machine is capable of printing 406 x355 x 406 mm pieces. It presents perfect conditions as it has little working hours.
Application Types
3DPrinting
11
3D Tiles production line
> Production line consisting of 3 machines, computer with software
> Consumables: Foil ok. 950m2, tiles 60x60cm –approx: 200m2, around 35 L UV Paint in 4colours, Activator 18 L i cleaning fluid ok. 17 L,
glass approx. 300 m2
www website with easy handling form CRM Panel
Online help from manufacturer
Printing technology and forming without air bubbles.
Brand mytiles
Oes9b
Video movies reg. Software usage
Spare parts; printing head, UV Paint hoses, pump, extra plc for...
11
Eos EOSINT plastic laser-sintering system
Here we offer an Eos EOSINT plastic laser-sintering system.
Eos EOSINT Plastic Laser-Sintering-System P380
Mvbjfs
The EOS P380 system includes the following
Installation space container
Powder container
Overflow tank
Cooler: Termo TEK Termochiller Type: 802-18644-3
Unpacking stamp
Removal trolley
3DM 8 zone process chamber heating 250°C
Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin
350mm x 350mm x 610mm
Voltage 3/N/PE/ 400...
15
CONCEPT LASER 3D Laser Printer
Type:M2 cusing
Year:2017
Laser wattage:400w
Laser type:Diode pumped yb-fiber
3-axis scan system:Scanlab rtc 5
Scanlab scan head type:Intelliscan 20
Spot velocity, max meters per second:6 m/s
Build envelope capacity:250x250x350mm
Layer thickness:20-80 microns
Production speed:2-20 cm per hour
Focus diameter:50-500 microns
Recoater speed:399 mm per second
Z-axis speed:1000 mm per second
Operating conditions (celsius):18-25 degrees
Positioning accuracy 280 mm:+/-0,1 m...
6
The Objet Eden260VS offers outstanding productivity
in a size that fits your creative environment.
Expressyour product vision with models up to
255 x 252x 200 mm (10.0 x 9.9 x 7.9 in.)
with ultra-fine layer thickness, smooth surfaces and thin walls.
Attractive Selling Price!
Fdl8j70ic
8
Mix 3 materials in 1 print
Printen with different shores (shore-A range)
Build size: 255 X 252 X 200 mm
Layer thickness: 0,016 / 0,030 mm
N3sxl
4
Additional Equipment
1x stainless steel washout unit UW20
B38xhrdr
This Stratasys F370 3D printer was built in 2017. It has a record of 13400 operating hours. This machine performs with a FDM technology. It works with a build volume 356 x 254 x 356 mm. This 3D printer includes 1 stainless steel washout unit UW20.
Application Types
3DPrinting
3
Specifications for Objet Eden 260VS
Build volume 255 x 252 x 200 mm
Materials Vero Family, VeroClear, RGD720, Endur, DurusWhite, TangoGray, TangoBlack, TangoPlus, TangoBlackPlus
Layer thickness 30 µm and 16 µm
Material feed Four material chutes, two for model and two for support material, 3.6 kg
14 different starting materials
crystal clear transparent material
heat-resistant material
polypropylene-like material
soft, rubbery materials
soluble support material FullCure 707
Bsplagtlsh
14
Stratasys
Here we offer you a 3D printer with ultrasonic bath.
Manufacturer: Stratasys
Manufacture of 3D parts in FDM layering process
Max part size : 355 x 254x 254mm
Material: ABS, Polycarbonate
O0smn
Layer thickness: (0.13 ABS only) 0.18 to 0.25
Unit dimensions : 1270 x 860 D x 1950 H mm
Electrical connection: 380 VAC (35A)
Machine weight approx. 680kg
Type: FDM Vantage
Ultrasonic bath type: CleanStation UW 90
Condition: used / used
Scope of delivery: (see picture, documentation available)
(C...
3D Metal Printer for Impossible Products to do...
Launching a new product is a process basing on repetitions. Before their release every products gets a prototype process after various analysis and design steps. The 3D printers making production with additive manufacturing method enable the production of real prototypes of dreams carried to the digital world as a new product. The products having complexed geometries, therefore cannot be manufactured by classic methods can be conveniently manufac...
1
Speed, quality and strength
These are the core features of the HP Jet Fusion 3D 4200 that it combines to make your 3D printing dreams a reality.
Benefits for your business at a glance:
- Exceptional dimensional accuracy and high detail resolution due to the multi-agent printing process.
Bspt2ubr28
- Continuous monitoring of part quality during the printing process
- High productivity with continuous printing process and fast cooling
- Lower cost per part compared to other 3D printers
- Optimize ...
7
Stratasys F370 in very good working conditions. This printer has only 430 printing hours. Includes some spools of material and build sheets. Reason for selling Covid-19
Bsoeiegz3g
3
Movement
X-Axis Movement 300 mm
Y-Axis Movement 200 mm
Z-Axis Movement 200 mm
Fh8oamd
This Roboze One Plus 400 3D Printer was built in the year 2019 in Italy. This machine is equipped with a 5 inch color touch screen. It includes an air cooling system and 6 technical materials.
Application Types
3DPrinting
9
CeraPrinter F-Serie is All-in-one State-of-the-art Digital
Materials Deposition Platform for process development
in Printed Electronics and Smart 3D Printing. In addition
Bsop9uqkts
to all the CeraPrinter advantages, F-Serie is a hybrid
materials deposition platform combining Inkjet and
Aerosol Jet® technologies.
This machine comes with 2 Dimatix inkjet printing heads
and the following options :
-Hepa Filter
-Fume extractor
5
3D OBJECT EDEN 350V Printer (second hand). Serviced regularly by a professional company.
It has just passed complete, paid service. We can send a report if it is required.
Ekezu09
It was used very rarely- in total 472 hours. There is only one printing head to replace and for some time UV lamps(availability of spare parts shouldn’t be a problem).
Rest of the parts is in very good condition.
There is a space for considerable price negotiations and possibility of seeing the printer on site in Toru...
3
Installation space (X, Y, Z): 254 x 381 x 203 mm
Printing Technology: ColorJetPrinting (CJP)
Layer thickness: standard 0.1mm, adjustment possible
Printheads: 5x HP11 pens
Filament diameter: n / a
Ptxpmu
Print Pause + Restart: no
Housing: anodised sheet metal
Construction platform: n / a
Interface: via rotary knob and display on the device / software on PC
Software: Windows 32Bit / 64Bit
File formats: STL, VRML, PLY, 3DS, ZPR
Network connection: Ethernet
Weight: 340kg
Dimensions: 188 x 74 x 145 c...
10
In this offer you will purchase a used Keyence Agilista 3110W 3D printer
Object of sale:
1Keyence Agilista 3110W with the following equipment:
incl. rinsing tank
Condition:
Bourxtgazz
This offer is for a used device, which under certain circumstances may show signs of use.
(minor scratches or yellowing).
The device is tested for function
A test printout can be seen on the photo
For further information you can of course also contact us personally.
Shipping is possible on ...
6
Machine is a working condition and is serviced annually. This machine can print all Stratasys materials (full option).
82slpx
Includes 25 kVA transformer.
15
Objet Stratasys 3D Printer
Here we offer you an Objet Stratasys 3D printer.
Size/Weight of the system
Machine: 82.5 × 62 × 59 cm; 106 kg
Br9wp033kz
build platform: 300 × 200 × 150 mm
Layer thickness: 28 µm; 16 µm for VeroClear material
Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material and finishing method
Model materials:
Transparent, solid (VeroClear).
Solid, opaque, white (VeroWhitePlus)
Solid, opaque, blue (VeroBlue)
Solid, opaque, black (VeroBlack)
Solid opa...
15
3
3D printer has printed 616 hours!!!
Bqzly0bj8t
3D printer has been very well cared for and regularly maintained, it has no bugs or anything like that.
Printing in very many different materials (biocompatible, heat resistant....)
1
Commissioning / First Installation: 2017
Bdamut7nnq
Installation space in mm (x / y / z)
Build Chamber in mm (x / y / z) 250x250x300
Construction speed
Build speed up to 20cm3 / hour *
up to 20cm3 / hour *
Laser power
400 watt laser power
Beam diameter
Laser focus diameter 70 µm
Layer thickness
Layer thickness 20 - 100 µm
Scanning speed
Speed scanning up to 2 m / s
up to 2m / s
positioning
Speed positioning 7 m / s
Dimensions in mm (W x H x D)
Dimensions in mm (W x H x D) Printer: 853x2115x1...
10
In this offer you acquire a used 3D printer "Stratasys Eden 260VS ".
Item for sale:
1 x Stratasys Eden260VS with the following equipment:
incl.CleanStation Super DT3
incl.RIP
Condition:
Bia9mtv33j
This is a used machine, which may show signs of use (minor scratches or yellowing).
(minor scratches or yellowing).
The unit has been tested for function
A test printout can be seen in the photo.
03.2020 a new print head was installed by a technician.
For more information...
6
Build size: 355 x 254 x 254 mm
Bjrqm3mblk
Layer thickness: 0,127 / 0,178 / 0,254 / 0,33 mm
Model material: ABS-M30 / Nylon 12 / PC
Support material: Soluble support
15
Stratasys
Here we offer you a 3D printer.
Manufacturer: Stratasys
Production of 3D components
Dimensions: 1283 mm x 1962 mm x 896 mm
max build volume : small 355 x 254 x 254 mm
large 406 x 355 x 406
2st7fm
Material : ABS-M30, PC/ABS,PC,ULTEM,PPSU
Dimensions of the unit: 1270 x 860 x 1950 mm
Electrical connection: power current 380 V
Recommended ambient temperature 18 - 29 C
External compressed air is required!
Machine weight approx. 595 kg
Type: Fortus 360mc
Condition: used / used
Scope of deliv...
2
Professional 3D printer, ProJet 2500 PLUS.
Gxbp70
Building plate: 295 x 211 x 142 mm
Dimensions: 1120 x 740 x 1070 mm
Included
- 1x MJP Easy Clean Station
- Total printing time only 990 h
2
5
First installed: 2016
Bekt7dvd9t
Laser is overhauled
Space in mm (x / y / z)
Build Chamber in mm (x / y / z) 280x280x350
laser power
Laser Power 400 W YLR Fiber Laser
Building speed *
Build Speed * 35 cc / h
Prakt. layer thickness
Pract. Layer thickness 20μm - 100μm
Min. Track width / wall thickness
Min. Scan Line / Wall Thickness 180μm
Operative beam focus freely selectable
Operational beam focus variable 100μm - 700μm
exposure speed
Scan speed 15 m / s
Inert gas consumption in the process
In...
1
108 days left
Fortus 900mc 3D printing system, used for the rapid prototyping and mass production delivery of jigs, parts, tools and fixtures, Second Dimension 1200es 3D printer, with one material type. Fortus 900mc multiple machine type variation, ABS, ASA, Nylon 12, PC, Ultem 1010 with colour range. The Fortus 900mc printer also comes with all the required software (insight and control centre) plus a post-process finishing tank (for support removal) and oven (required for Ultem support removal), S/N: T9513,...
3
3D-Ducker make STRATASYS type uPrint
Machine # P51055
Technical data:
printer height 762 mm (30 inches)
Printer width 660 mm (26 inches)
Printer depth 660 mm (26 inches)
Printer weight 62 kg
Material shaft height 153 mm (6 inch)
Material shaft width 660 mm (26 inches)
Material hopper depth 660 mm (26 inches)
Material Bay Weight 1 7 kg (37 lbs.)
Bokhv8qn0k
Ventilation Requirements
Minimum clearance behind the unit for air circulation 115 mm (4.5 in)
Min. space around the printer for air circulati...
8
Selective Laser Melting Machine SLM 280 HL
Here we offer you a Selective Laser Melting machine.
SLM Solutions AG Selective Laser Melting Machine SLM 280 HL
The Selective Laser Melting machine SLM 280 provides an installation space of 280 x 280 x 365 mm
and a patented multi-beam technology.
Machine configuration: Single optics 1x 400W
Materials used: Exclusively 1.4404 as well as 1.4545
Technical specifications:
Machine configuration for all metal powders / Subject to technical changes.
Installat...
3D dental printer with a High-quality print mode and PolyJet technology.
Made in USA
Technical Specifications:
X-axis: 600 dpi
Y-axis: 600 dpi
Z-axis: 900 dpi
Layer Thickness:
28 microns
System size and weight:
Length: 8250 mm
Width: 6200 mm
Height: 5900 mm
Weight: 93 kg
Tray Size:
Length: 300 mm
Width: 200 mm
Height: 100 mm
Cbtnacxe
More Info:
Support material.
Spare parts like filters etc.
Maintained by the supplier. (invoices present)
Notes:
Availability immediately
Available i...
12
3DSYSTEMS 3D Printer FABPRO 1000
- Make : 3DSYSTEMS
- Typ : FABPRO 1000
- Age : 2018
- Printing building capacity
- Length : 125
- Width : 70
- Height : 120
- Pixel pitch : 65 microns
- Layer thickness : 30 – 100 microns
- Wavelength : 405 Nm
- Operating temperature : 18 – 28 Gr
- Humidity : 30 – 70 %
- Dimensions printer / UV-Curing unit
- Length : 620 / 410
- Width : 620 / 440
- Height : 1010 / 380
- Weight : 55 Kg / 22 Kg
- LC-3D Print box UV-curing unit
- Load capacity ...