3 axis lathe buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
3

2 Axis Teach Inn/ Cyclecontr CNC Lathe Gildemeister Nef Plus 710

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1997
good (used)
Maximum swing over bed 710 mm. Spindle speed 3 steps. M8ugr 16-180 Rpm /56-610 Rpm / 160-1800 Rpm. Centerheight 345 mm. Maximum turning length 2000 mm. CNC Control Grundig Manual Plus more
15
Serial No. 138092 Control Mazatrol T Plus Turning length 3002 mm Turning diameter 915 mm Between centres 3000 mm Swing over bed 915 mm Swing over cross slide 770 mm Spindle speeds 2 - 1300 rpm Number of stations on turret 2 Spindle bore 118 mm Z axis stroke 3055 mm X axis stroke 745 mm Y axis stroke 130 mm +/- Feed rate cutting 5000 mm per minute spindle taper BT 50 milling speed up to 2000 rpm Input 380/3/50 60 hp Hydraulic stroke of barrel 160 mm 3 jaw chuck 630 mm Fitted with 60 station auto... more
4

2 AXIS LATHE DOOSAN LYNX 220B

Turate (CO), ItalyItaly
6808 km
2008
excellent (used)
VERSION WITH LINEAR GUIDES WITH BALL RECIRCULATION SHOES. Bcu73o78o3 Control unit: FANUC CNC 0i-TC Capacity: max diam. swing over bed 510 mm Max diam. swing over carriage 290 mm Max diam. Max to turn mm 320 Max lenght 305 mm Max diam. bar turning 52 mm 50/5000 RPM spindle rotation speed: max. Spindle nose ASA 6 " 11/15 spindle motor power Kw Turret: turret Stations 12 pos. Dimensions turning tools/25x25/40 mm bore diameter. Tailstock: diam. 65 mm steerer tube. 80 mm Quill travel – C... more
15
GILDEMEISTER CTX 500E 1999 year of production Control Eltropilot 3190 heidenhain Turn PLUS X-Axis 320 mm Y axis 100mm Z-Axis 2.080 mm turning length C-Axis live tooling Spindle bore 92mm Swing diameter over bed 670mm Speed 18 - 3.600 rpm Spindle Drive Motor rating 23 kW spindle Torque 650 Nm chuck diameter 315mm Spindle Noise 220h5 Feeds X 24000mm/min Bb0o8hnufa Z 30000mm/min Tool turret 12 stations Tool holder VDI 40 Tool drive on 6 stations C axis Tail stock: ... more
8

CNC lathes 5 axis Graziano GT-300

Schwäbisch Gmünd , GermanyGermany
6698 km
1999
ready for operation (used)
Type of machine: Granziano GT 300 5-axis Manufacturer: Graziano Model: GT-300 Bctga7rn2o Year of construction: 1999 Weight 3500 kg State ready to be used (second hand) Dimensions: 3, 40 m with chip conveyor, 1, 7m long high + 0, 6 m suction Arbeitsraum(abnehmbar, 1,4m Tief + Schaltschranktüren) DESCRIPTION CNC lathe powered by Sauter revolver 12 stations X-axis - 65mm up to + 245mm Z-axis 500mm (-feed) Y-axis 64mm (- 32mm - + 32mm C-axis 0.001 ° Maximum speed 5000 RPM (6000 RPM) R... more
13

6 axis cnc lathe TECKNO 6 axis cnc lathe TECKNO

Codevilla, ItalyItaly dealership location
6846 km
ready for operation (used)
Tornio TEKNO V -6 assi -Cnc -anno 2003 Bcp7qzxuyz more
7

CNC 2 Axis Lathe Mazak Quick Turn 20

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1995
good (used)
Maximum turning diameter 300 mm. Naqmf Maximum swing 440 mm. Maximum spindle bore for bar work 51 mm. Spindle speed 50-5000 Rpm. Maximum turning length 446 mm. Number of tools on turret 8. Tool type Drum turret. CNC control Mazatrol T Plus more
13
Serial No. X4S327 Bcthyu7j7j Control Fanuc OI-TD Height of centres 275 mm Between centres 2000 mm Swing over bed 554 mm Swing over cross slide 370 mm Swing in gap 830 mm Spindle speeds 1 - 2000 rpm Spindle bore 104 mm Tail stock no 5 morse taper Z axis stroke 2030 mm X axis stroke 296 mm Gap piece casting 335 mm Gap in front of face plate 218 mm Bed type double vee Input 415/3/50 7.5 kw 3 jaw chuck 310 mm Tool post quick change Length 4300 mm Width 2000 mm Height 1800 mm Nett weight actual. 3,... more
15
- Number of spindles : 2 - Number of axes : 8 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 22 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 52 [mm] - Max. turning diameter : 190 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 22 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 52 [mm] - C axis indexing precision : 0,001 [°] - Travel : 525 [mm] UPPER LEFT TURRET - Number of po... more
9
X-axis: 264 mm Y axis: 120 mm Z axis: 600 mm Accuracy: 4 µ Number of tools: 22 Speed: 3600 Serial number: CA23595 Bcu0oznidm more


3 axis lathe
daily

New machines via email!

Stay updated!
6

- USED- 2-AXIS CNC LATHE PBR 500X2000

Matelica (MC), ItalyItaly dealership location
7213 km
ready for operation (used)
DISTANCE BETWEEN CENTRES: 2000 mm MAX TURNING DIAMETER: 1000 mm BAR PASSAGE: 117 mm SPINDLE: 8320 Nm; 55 Kw; 1720 rpm X-AXIS TRAVEL: 1160 mm Z-AXIS TRAVEL: 2100 mm CONTROL UNIT: ECS 2302 WEIGHT: 19500 Kg ACCESSORIES: SWARF CONVEYOR Bcq9hlg7f3 PRICE: On demand more
6

Lathe CNC multiaxis Gildemeister GMX 250 S linear

Brno - Slatina , Czech RepublicCzech Republic dealership location
7122 km
2007
good (used)
Lathe CNC multiaxis GMX 250 S linear Producer: Gildemeister YP: 2007 Control Heidenhain ... Plus IT Turning diameter ... 558mm Turning length ... 1069mm Gegenspindle Spindle bore ... 50mm milling head Plátze in the turret ... 46 Spindle speed ... 1-12000 / min. Dimensions (LxWxH) ... 7300 x 4000 x 2799mm Machine weight ... 29762kg Ba7uysddgw Axis B ... 120 ° more
5
Maximum turning diameter 300 mm. Maximum swing 525 mm. Maximum spindle bore for bar work 65 mm. Ndqzz Spindle speed 35-4.000 Rpm. Number of tools on turret 16/16 . Tool type Mazak VDI. CNC control Mazatrol Fusion 640 T more
7

CNC Lathe with C axis DAEWOO PUMA 350 MA

Umkirch , GermanyGermany dealership location
6603 km
1998
excellent (used)
CNC lathe Daewoo Puma 250 MA with accessories incl. Driven tool holder Year of construction: 1998 Control: Fanuc Series O - T Max. Turning diameter over bed: 700 mm Max. Turning diameter: 460 mm Maximum turning length: 1050 mm Spindle passage: 102 mm (91 mm) Main spindle speed: 3000 rpm Main spindle motor: 30 Kw Revolver with 12 stations X1 / X2 axis movement: 362 mm Z 1 / Z2 Axial movement: 1105 mm Bcrpkuh3p7 Machine length: 3,890 mm Machine width: 2,390 mm Machine height: ... more
10

2 axis cnc lathe DOOSAN Lynx 220B

Albairate, ItalyItaly
6819 km
2009
excellent (used)
Bnwyinb LINEAR GUIDES VERSION. CNC unit: FANUC 0i - TC with Manual Guide Capacity: max. diam. rotating on the bench 510 mm max. diam. rotating on the carriage 290 mm max. diam. turning 320 mm max. turning length 305 mm max. diam. bar turning 52 mm Spindle: max. rotation speed 50/5000 Nose spindle ASA 6 "Spindle motor power 11/15 Kw Tower: Stations on tower 12 pos. Dimensions of turning tools / bending 25x25 / diam .40 mm Tailstock: diam. barrel 65 mm. Race tube 80 mm - C.M. 4 - Machine we... more
10
CNC Lathe with Bar Feeder LNS 4 Axis C Achse OKUMA OSP 7000 L CNC, 20.87 Swing Sub -Spindle Twin Turret Chip Conveyor 8" 3- Jaw Chuck 6"3-Jaw Chuck 23 Between Spindels Parts Catcher Barfeed Interface Bcsav2gnwe LNS Barfeeder more
8

- USED - 8-AXIS SLIDING HEADSTOCK LATHE WITH BAR FEEDER TORNOS SIGMA 20

Matelica (MC), ItalyItaly dealership location
7213 km
2007
ready for operation (used)
MAX TURNING LENGTH: 200 mm BAR PASSAGE: 20 mm SPINDLE: 35 Nm; 3,7 - 5,5 Kw; 10000 rpm Bcq9hbvxr2 COUNTER SPINDLE: 35 Nm; 3,7 - 5,5 Kw; 10000 rpm X1-AXIS TRAVEL: 58 mm X2-AXIS TRAVEL: 58 mm Y1-AXIS TRAVEL: 534 mm Y2-AXIS TRAVEL: 456 mm Z1-AXIS TRAVEL: 230 mm Z2-AXIS TRAVEL: 115 mm RAPID FEEDS X-Y-Z: 30 - 30 - 30 m/min DRIVEN TURRET HEAD: 1,5 - 2,2 Kw; 10000 rpm CONTROL UNIT: FANUC 31iA BAR FEEDER: ROBOBAR SBF 532 BAR LENGTH: 3000 mm BAR DIAMETER: 32 mm WEIGHT: 4520 Kg OVERALL DIMENSIONS: 857... more
5

Lathe CNC multiaxis Schaublin SCHAUBLIN 140 CNC

Brno - Slatina , Czech RepublicCzech Republic dealership location
7122 km
2004
good (used)
Lathe CNC multiaxis SCHAUBLIN 140 CNC Hersteller: Schaublin YP: 2004 Control ... 21i - TB Turning diameter ... 270mm Turning length ... 430mm Spindle bore ... 51mm Places in the turret (driven) ... 12/12 * Main motor power ... 7.5 kW Spindle speed ... 30-5000 / min. Dimensions (LxWxH) ... 2530 x 1260 x 2540 mm Machine weight ... 3000kg Jik87ts C axis 0.001 ° Rod system LNS Express.332 more
7

4 Axis CNC Lathe with driven tools Okuma LU 15 MW

More Okuma Lu 15
Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1996
good (used)
Standard turning diameter 150 mm. Maximum swing 530 mm. Maximum spindle bore for bar work 52 mm. Itfydxd Spindle speed 45 – 4.500 Rpm. Number of tools on turret 12. Tool type VDI 40. CNC control OSP 7000 L. With 4 Axis, driven tools and sub spindle more
5

CNC Lathe with bar loader + C axis EMCO E 45

More Emco E 45
Umkirch , GermanyGermany dealership location
6603 km
2007
good condition (used)
The machine is with bar loader, has run only 1,700 hours and is in very good condition. Year of manufacture: 2007 Control: Fanuc 0 iTC Swing: -Over bed: 430 mm -Over cross slide: 210 mm Turning diameter: 220 mm Distance between centers: 600 mm Turning lenght: 510 mm Bar diameter, max: 45 mm Spindle speed: 0 - 6300 rpm Spindle bore: 53 mm Tool changer: 12 positions -Rotating tools: 6 positions/ 0 - 5000 rpm Bcrlkpojkp Tailstock: -Stroke: 120 mm -Diameter: 60 mm... more
6
4-axis CNC Chuck lathe Fabr.OKUMA type: LR35 BJ. 91 control OKUMA OSP5020L. Max turning diameter: 450 mm Turning diameter over longitudinal max sledge: 420 mm Along route Z-axis 900mm 2 Werkzeugrevoler with 12 u. 10 tool of pos. VDI50 Chuck 400 mm Forkardt Chip conveyor Foaw2swpq No tailstock. more
12
Offered here is a CNC lathe manufacturer Gildemeister with C-axis and driven tools. The machine is in good condition and can be inspected and tested under power. Technical specifications: Manufacturer: Gildemeister Type: CTX 600 Year of construction: 1994 Control: Grundig Eltropilot Workspace: Turning diameter over bed: 650 mm Finz3umtg Turning diameter over cross slide: 480 mm Travel distance: 320 mm Longitudinal path: 2097 mm Spindle: Spindle bore: 107 mm Speed ​​range: 4-... more
8

- USED - 3-AXIS CNC LATHE MAZAK QUICK TURN NEXUS 200-II M

Matelica (MC), ItalyItaly dealership location
7213 km
2008
ready for operation (used)
MAX ROTATING DIAMETER: 675 mm MAX TURNING LENGTH: 538 mm MAX TURNING DIAMETER: 380 mm BAR PASSAGE: 65 mm SPINDLE: 35-5000 rpm; 26 Kw; ASA A2-6 ; 210 mm X-AXIS TRAVEL: 230 mm Z-AXIS TRAVEL: 575 mm RAPID FEEDS X-Z: 30 - 33 m/min By8q0bzd DRIVEN TURRET HEAD: 12 POS; 4500 rpm; 6 Kw CONTROL UNIT: MAZATROL MATRIX WEIGHT: 4380 Kg OVERALL DIMENSIONS: 2800 x 1800 x 1840 mm ACCESSORIES: SWARF CONVEYOR; TOOL PRESETTER NOTE: MACHINE PROVIDED WITH 3-JAWS CHUCK INSTEAD OF THE 4-JAW CHUCK AS SHOWN IN THE P... more
9

CNC lathe multi-axis Willemin-Macodel 508 MT

Brno - Slatina , Czech RepublicCzech Republic
7122 km
2014
excellent (used)
CNC lathe multi-axis 508 MT Producer: Willemin-Macodel YP: 2014 Control Fanuc ... 31i - B5 Turning diameter ... 42mm Turning length ... 180mm counter spindle Spindle bore ... 42mm Axis X ... 450mm Axis Y ... 200mm Axis Z ... 425mm Axis A ... 360 ° Spindle speed ... 50-30000 / min. Bcsehdfhsa HSK - 40 Magazine places ... 72 Axis C ... 360 ° lxwxh ... 2050 x 2350 x 2670mm Machine weight ... 2500kg Controlled axes ... 8 Axis U ... 300mm Axis B ... -45 ° / + 115 °° cooling th... more
3

4 Axis CNC Lathe Okuma LU 15 M

More Okuma Lu 15
Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1994
good (used)
Standard turning diameter 340 mm Maximum swing 330 mm Maximum spindle bore for bar work 62 mm Spindle speed 45 – 4.500 Rpm 92eaon8ty Number of tools on turret V 12/V 8 Tool type VDI 40 CNC control OSP 5020 L With 4 Axis more
5
CNC Lathe with C axis Turning Diameter 400 mm Turning Lenght 650 mm Bcv3oi9zjn Spindle bore size 65 mm Control Unit FANUC 31TA Tool holder VDI30 With tailstock,Barfeeder, Chip conveyor ,Driven tools more
1
CNC Slant Turn Lathe with Driven Tools & C Axis Fanuc 18-TB control Swing over bed 1050 mm Swing over cross Slide 800 mm Travels: X/Z 600/4000 mm Distance between centres 4000 mm Spindle Bore 206 mm Speed range ~ 97 – 800 RPM 12 station turret Maximum weight of work piece: 4500 Kg Spindle power 80 Kw Driven tools 6 stations Driven tools speeds ~ 2000 RPM Driven tools power 17.5 Kw C-Axis 15 RPM Haqxsvb Tailstock 2 off SMW SLU-5-ZS Steady Rest Swarf conveyor more
4

Cnc 3 axis lathe MAZAK SQT 250M /1000

More Mazak Sqt 250
rue louis auguste blanqui 145, 93140 bondy, FRFrance
6208 km
2002
reconditioned (used)
3 axis Mazak CN Tower Type square - 250 M 1000 L Year 2002 CN Mazatrol 640T PC FUSION. Turret 12 motorized post D9qtdv Diameter of 250 mm Chuck Diameter of 300 mm machining Max diameter above the bench 500 mm Machining max 1200 mm length Spindle speed 35-4000 RPM 22 Kw Chip conveyor Chuck 3 JAWS KITAGAWA nine (buy in 2017 €2500.00 HT) Complete documentation Visible running machine More than €30,000 reclamation complete in 2017, geometry, programming, hydraulic unit, Chuck ni... more
4

- USED - 7-AXIS SLIDING HEADSTOCK LATHE WITH BAR FEEDER TSUGAMI MORI BS26S III

Matelica (MC), ItalyItaly dealership location
7213 km
2005
ready for operation (used)
MAX TURNING LENGTH: 210 mm BAR PASSAGE: 26 mm SPINDLE: 200-7000 rpm; 3,7 - 5,5 Kw Bclxm9czcy COUNTER SPINDLE: 200-7000 rpm; 1,5 - 2,2 Kw Z1-AXIS TRAVEL: 210 mm Z2-AXIS TRAVEL: 80 mm CONTROL UNIT: MSC 501 BAR FEEDER: IEMCA Mod. BOSS 332 EVOLUTION BAR LENGTH: 3200 mm BAR DIAMETER: 3-32 mm WEIGHT: 2600 Kg OVERALL DIMENSIONS: 2150 x 1450 x 1825 mm NOTE: MAIN SPINDLE: MAX DRILLING DIAMETER 12 mm; MAX TAPPING DIAMETER M10; COUNTER SPINDLE: MAX DRILLING DIAMETER 10 mm; MAX TAPPING DIAMETER M8 PRICE... more
3

CNC multi axis lathe Mori Seiki NL 1500 SY/500

Brno - Slatina , Czech RepublicCzech Republic
7122 km
2006
excellent (used)
CNC multi axis lathe NL 1500 SY/500 Producer: Mori Seiki YP: 2006 Control MORI SEIKI MSX 850 Turning diameter ... 366mm Turning length ... 515mm Axis Y ... + -50mm counter spindle Spindle bore ... 52mm Spindle speed ... 1-6000 / min. l x w x h ... 2705 x 2000 x 2120mm Nfffx Machine weight ... 5700kg Number of tools (thereof driven) ... 12/12 * In goog condition, possible to test under power. more
4
Maximum turning diameter 300 mm. Maximum swing 525 mm. Maximum spindle bore for bar work 51 mm. Spindle speed 35-5.000 Rpm. Number of tools on turret 16/16 . Tool type Mazak VDI. CNC control Mazatrol Fusion 640 T. Lznqcv9n more
13
Control: Siemens Sinumerik 840 D Year of construction: 2012 Technical data: circulation over bed: 385 mm Circulation over carriage: 350 mm Turning length: 650 mm Spindle bore: 65 mm Plan travel (X): 255 mm Plan travel (Z): 800 mm Speed Max 4500 RPM With the following accessories: Sliding screen design with interior lighting 12 station turret with 6 driven tools 2 STK. driven tools VDI 30 10 PCs. VDI 30 tool holders Tailstock with Quill 1 live centre point 3 jaw Chuck hydra... more
3

CNC Lathe Nakamura TW-20 MMY

Bayrampaşa/ İstanbul, TurkeyTurkey
8426 km
1998
excellent (used)
Cnc Drehmaschine Ne8jd more
8
CNC VERTICAL LATHE (with C-axis) Manufactured: TOS-HULIN Model: SKA-12 YOM: 2000 CNC: Siemens 840C (with monitor TFT-10) Plate diamenter: 1.250 mm Max turning diameter: 1.400 mm Max turning height: 1.900 mm Min boring diameter: 320 mm R.p.m.: 630 Main engine power: 63 Kw Speed ranges: 2 Max allowable weight: 8.000 kg C-axis: YES Tool magazine: 88 for ISO 50, head fo... more
6

- USED- 2-AXIS CNC LATHE ECOCA SJ 30B

Matelica (MC), ItalyItaly dealership location
7213 km
1996
ready for operation (used)
MAX ROTATING DIAMETER: 580 mm Bciyhyuk2o MAX TURNING LENGTH: 460 mm MAX TURNING DIAMETER: 280 mm BAR PASSAGE: 75 mm SPINDLE: 4200 rpm; 11-15 Kw; 254 mm X-AXIS TRAVEL: 190 mm Z-AXIS TRAVEL: 520 mm RAPID FEEDS X-Z: 20 - 20 m/min TURRET HEAD: 12 POS CONTROL UNIT: FANUC O-T WEIGHT: 4700 Kg OVERALL DIMENSIONS: 3355 x 2140 x 1900 mm ACCESSORIES: SWARF CONVEYOR; TOOL PRESETTER NOTE: COMPLETO DI UN SET DI MORSETTI PRICE: On demand more
8

CNC lathe multi-axis Goodway GS 280 LM

Brno - Slatina , Czech RepublicCzech Republic
7122 km
2007
excellent (used)
CNC lathe multi-axis GS 280 LM Producer: Goodway YP: 2007 Control Fanuc ... 0i - TC Turning diameter ... 400mm Turning length ... 1134mm Spindle bore ... 90mm Circumference diameter over bed ... 500mm 3fvhnegp Spindle speed ... 0-3500 / min. Machine weight ... 6000kg Magazine locations (powered by) ... 12/12 * Total power requirement ... 30kVA Chip conveyor, cooling New hydraulic chuck SMW-Autoblok D 260 ... 78 mm Possible to test under power. more
3

4 Axis CNC Lathe Okuma LU 15 M BB

More Okuma Lu 15
Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1997
good (used)
Standard turning diameter 150 mm. Maximum swing 340 mm. Maximum spindle bore for bar work 70 mm. Spindle speed 38 – 3.800 Rpm. Number of tools on turret V 12/V 8. Tool type VDI 40. CNC control OSP 7000 L. Emfvzqszo With 4 Axis more
2
-ALEX TECH Bbl8kezrz9 -VIPER VT 30 BL -CNC FANUC 21iTB 08/2003 -Store 12 tools -Axes X, Z, C -Bar feeder, feeder of bar -Chip conveyor -Lot full tooling Attached sheet more
5
Heavy duty, rigid "Box Way" constructed 4 axis' centre lathe. 60KW spindle drive, belt driving a 2 speed range wet clutch headstock gearbox. Offering constant cutting speed. 2 x automatic tool posts (12 + 6 VDI 60). Fully programmable tailstock. Bahwobezcc Since new this machine has under gone a full mechanical and electrical rebuild. The machine features "Full Access" operator doors allowing the operator complete safe access to the machining area. more
4

3-AXIS LATHE DOOSAN PUMA 240 MC

More Doosan Puma 240
Turate (CO), ItalyItaly dealership location
6808 km
2006
excellent (used)
Control unit: FANUC CNC 21 i-TB Capacity: max diam. 550 mm swing over bed Max diam. swing over carriage 390 mm Max diam. swing 300 mm 501 mm turning lenght Max. Max diam. bar turning 76 mm Chuck: 3500 RPM rotation speed max. spindle nose ASA8 " spindle motor power 18.5 Kw Turret: turret stations 12 pos. all motorized Turning tool size/bore; 25x25/Ø 40 5000 RPM Max rotation speed rotating tools. Cxxjmig Accessories: chip conveyor belt – setter – 04 toolholders moving lights – raccog... more
6

- USED - 4-AXIS CNC LATHE WITH BAR FEEDER TAKAMAZ X20

Matelica (MC), ItalyItaly dealership location
7213 km
1998
ready for operation (used)
MAX TURNING LENGTH: 450 mm MAX TURNING DIAMETER: 260 mm BAR PASSAGE: 51 mm SPINDLE: 3500 rpm; 7,5-11 Kw; ASA 2-6 ; 210 mm COUNTER SPINDLE: 3500 rpm; 2,2-3,7 Kw X-AXIS TRAVEL: 165 mm Z-AXIS TRAVEL: 500 mm RAPID FEEDS X-Z: 18 - 24 m/min DRIVEN TURRET HEAD: 12 POS CONTROL UNIT: FANUC 18TB BAR FEEDER: LNS HYDROBAR SPRINT BAR LENGTH: 3000 mm WEIGHT: 4100 Kg OVERALL DIMENSIONS: 4000 x 2000 x 1675 mm ACCESSORIES: PARTS CATCHER; SWARF CONVEYOR; RS 232 SERIAL PORT NOTE: WITH No 2 RADIAL TOOLS AND No ... more
7
- control Mazatrol 640 T - spindle speed 4.000 RPM - spindle power 19,5/22kw - spindle bore dia.: 88 mm - swing over bed 620 mm - max. machinning dia. 420 mm - max machining length 1.017 mm - x axis travel 260 mm Jhf8uitp - z axis travel 1.030 mm - c axis 0,001° - tools turret 12 pos. - driven tools ( in all turrets positions ) - driven tools speed 2.000RPM / 4.000 RPM - driven tools power 7,5 kW - 4 - jaw chuck 12” - coolant increased pressure till 14 bar - chip conveyor - too... more
3

CNC 2 Axis Lathe Mazak Quick Turn 10

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
2002
good (used)
Maximum turning diameter 160 mm. Maximum swing 300 mm. Maximum spindle bore for bar work 40 mm. Spindle speed 60-6000 Rpm. Maximum turning length 256 mm. Number of tools on turret 12. Enclkwr Tool type Drum turret. CNC control Mazatrol Fusion 640T more
6

2-axis CNC lathe Okuma + Howa ACT20

Schwäbisch Gmünd , GermanyGermany dealership location
6698 km
1997
used
Okuma + Howa ACT-20 2-axis CNC lathe Chuck Ø160 Ddlawv7 CNC Fanuc 0 T year 1997 more
4

CNC lathe multi-axis MAZAK QT Smart 350M

Tuřanka 104 CTPark, 627 00 Brno - Slatina, CZCzech Republic
7122 km
2011
excellent (used)
CNC lathe multi-axis QT Smart 350M Producer: MAZAK YP: 2011 Bb7nairkqu Control Mazatrol ... MATRIX SMART Turning diameter ... 420mm Turning length ... 1274mm Axis X ... 240mm Axis Z ... 1305mm Main motor power ... 26kW Magazine places (driven by them) ... 12/3 * Spindle speed ... 0-4000 / min High pressure cooling 15bar Machine is in perfect condition, only installed in 2012. more
3

2-AXIS LATHE DOOSAN/ DAEWOO LYNX 210B

Turate (CO), ItalyItaly dealership location
6808 km
2004
good (used)
Control unit: FANUC CNC 21-iTB Capacity: max diam. 460 mm swing over bed Max diam. swing over carriage 350 mm Max diam. Turning level 280 mm Max lenght 305 mm Max diam. bar turning 51 mm Chuck: 5000 RPM rotation speed max. Spindle nose ASA 6 " Cxnyguf 11 spindle motor power Kw Turret: turret Stations 12 pos. Dimensions turning tools/25x25/40 mm bore diameter. Tailstock: diam. 65 mm steerer tube. – C.M. 4 Accessories: chip conveyor belt – setter – hand raccoglipezzo The figures show... more
6

- USED - 2-AXIS CNC VERTICAL LATHE TOPPER TGL15C

Matelica (MC), ItalyItaly dealership location
7213 km
2007
ready for operation (used)
MAX ROTATING DIAMETER: 300 mm MAX TURNING LENGTH: 100 mm MAX TURNING DIAMETER: 180 mm Gvm22g COUNTER SPINDLE: 6000 rpm; 5,5-7,5 Kw; 150 mm; ASA A2-5 X-AXIS TRAVEL: 170 mm Z-AXIS TRAVEL: 295 mm RAPID FEEDS X-Z: 30 - 30 m/min TURRET HEAD: 12 POS CONTROL UNIT: FANUC 0i-TC WEIGHT: 3000 Kg OVERALL DIMENSIONS: 2450 x 2750 x 2405 mm NOTE: SWARF CONVEYOR PRICE: On demand more
6

3-Axis CNC Lathe Traub TNK36

's-Heerenberg, NetherlandsNetherlands dealership location
6328 km
2003
good (used)
Traub TNK36 3 axis CNC Lathe Traub TX-8I Production time: 16.817 Hours 2 spindles - Main spindle 10.7 kW, 6300 rpm - Counter spindle 10.7 kW, 6300 rpm - Head and sub-spindle C-Axis Ba7vhfmw3h - Max bar diameter 36 mm - 157E Main and Counter spindle Collet Chucks 1 tool turret - 12 tool positions - All tools driven - Drive motor driven tools 100/15% ED, 2/5.5 kW - Driven tools 6000 rpm - X-axis 50 mm - Z-axis 100 mm - No Y-axis Options: - Prepared for bar loader - Alarm... more
6

2 Axis CNC Lathe Victor V-Turn 26 / 110

Zevenbergen, NetherlandsNetherlands
6233 km
2000
good (used)
CNC control Fanuc 0-Tc Maximum turning diameter 380 mm. Maximum swing 520 mm. Maximum spindle bore for bar work 75 mm. Spindle speed 3500 Rpm. Bctz00gmj7 Maximum turning length 1130 mm. Number of tools on turret 10. Tool type VDI 40. CNC control Fanuc 0-Tc more
5

CNC lathe + C axis Gildemeister CTV 250

Schwäbisch Gmünd , GermanyGermany dealership location
6698 km
2002
used
Guild master CTV-250 2-axis CNC turning + C Chuck Ø250 differential pressure; EWAB endless belt 9lauerwwn Drive: 21KW; 200NmM; 500 min-1 control: Siemens 840DWerkzeuge and tool holder 12 VDI 40 year: 2002 more


3 axis lathe
daily

New machines via email!

Stay updated!

to

to

Edit search
3 AXIS LATHE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close