Used Conventional Lathe for sale (5,907)

Condition: used, Year of construction: 1988, centre distance 1100 mm 840 mm hollow 80 mm ja Itsdpfozycrtsx Ap Djn connected load 18,5 kW digital ja multifix ja weight of the machine ca. 4 t

Condition: used, Year of construction: 1970, centre height 120 mm spindle bore 20 mm copying device ja kW Itsdpfx Ajzndt Iep Den weight of the machine ca. 3 t

Condition: used, Year of construction: 1978, functionality: fully functional, spindle bore: 250 mm, overall weight: 11,000 kg, Brand: Gurutzpe Model: Super AT 8000/600 Distance between centers: 8,000mm Swing over bed: 1,200mm Swing over carriage: 910mm Spindle bore: 250mm Gap: - Maximum admissible diameter: 1,500mm - Length in front of spindle: 410mm Powered carriage Maximum load between centers: 3,500kg Maximum load with one steady rest: 4,400kg Ijdpfx Aeyc R I Aop Dstn Maximum load with two steady rests: 5,300kg Motor power: 15Hp Weight: 11,000kg Includes: - TdG 3-jaw chuck 520mm with internal, external, and soft jaws - Faceplate 1,100mm - Closed steady rest 500mm - Open steady rest with support 800mm - Open steady rest turret 100mm - Various lathe tools - 4-jaw chuck 700mm with 250mm spindle bore - 4-jaw chuck 800mm with 250mm spindle bore Year of lathe: 1978 *Original manual available

Condition: used, Year of construction: 2008, functionality: fully functional, used lathe Manufacturer: Pfeiffer Iodpfxe Aarraj Ap Dotn

Condition: used, Year of construction: 1989, centre distance 2000 mm Iedpfx Aeyi Hvvep Dstn 600 weight of the machine ca. 3,2 t Passage 49 mm Digital Lynette

Condition: repair required (used), functionality: limited functionality, Manufacturer: Maschinen Wagner Model: DCE 230 × 1500 Machine type: Lead and feed spindle lathe Machine no.: 2JG0160 Year of manufacture: 1990 Power connection: 380 V / 50 Hz Distance between centers: approx. 1,500 mm Swing over bed: approx. 230 mm* Swing over cross slide: approx. 460 mm* Turning diameter over cross slide: approx. 290 mm* Iodpoz Hpahsfx Ap Dotn Spindle bore: approx. 60 mm* Max. spindle speed: approx. 1,800 rpm* Main motor: approx. 5.5 kW* Machine weight: approx. 1,800–2,200 kg* Feed: mechanical longitudinal and transverse feed (feed shaft does not rotate, presumably a shear pin has sheared) Thread cutting: functions via lead screw and feed gear Guideways in very good condition. Accessories: Tool holder, tailstock center The machine can be inspected on site.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 50 h, MEKITurn KT660 x 1500 - conventional lathe with FAGOR iT30 measuring system. Precise conventional turning and solid machine construction. Demonstration machine, year of manufacture 2024, approximately 50 operating hours, and immediately available. TECHNICAL DATA Swing over bed: 660 mm Swing over cross slide: approx. 430 to 440 mm Swing over compound slide: approx. 820 to 845 mm Distance between centers: 1540 mm Center height: 330 mm Itodpfxjz E H Nqo Ap Dsn Bed width: 400 mm Spindle bore: 105 mm Spindle nose: D1-11 Spindle speed: 15 to 1200 rpm Number of speed steps: 12 Main motor: 11 kW Tailstock quill: diameter 75 mm Quill travel: 160 mm Tailstock arbor: MK5 Machine weight: approx. 2580 kg EQUIPMENT FAGOR iT30 measuring system Cooling system Tailstock Steady rest 315 mm scroll chuck Safety devices German CE declaration of conformity, issued by the German importer PRICE AND LOCATION Special price on request, ex works 66706 Perl-Besch, Germany. Seller: 3M-Consulting SARL. Delivery, installation and commissioning at the customer's site possible for an additional charge. WARRANTY For Germany and Luxembourg: 6 months warranty from handover, including materials and labor. Travel costs are not included. Outside Germany and Luxembourg: 6 months warranty on materials from delivery. Labor and travel costs are not included. Technical specifications according to the present and confirmed data sheet.

Condition: used, Year of construction: 1971, digital ja multifix ja ja documentation ja bed bridge ja Isdeztfxcepfx Ap Detn good condition ja centre distance 1800 mm 530mm serial number 0556 hollow 60 mm weight 3,3 t

Condition: used, Year of construction: 2002, turning diameter 290 mm turning length 850 mm swing diameter over bed slide 600 mm Control Siemens SINUMERIK 840D total power requirement 58 kW Automation: Portal with 2 belts Number of turrets: 3 Spindle: Yes # Stepping wheel: No X-axis (transverse) travel: approx. 220 mm Z-axis (longitudinal) travel: approx. 950 mm Iodpfx Aezrzxcsp Djtn Feed rate: approx. 25 m/min (x/y) Rapid traverse: approx. 25 m/min

Condition: used, Year of construction: 1954, 530 mm Iodpjztfygjfx Ap Dotn serial number 13436 weight of the machine ca. 1,4 t

Condition: good (used), Machine is in good condition. Iedpjzb Nfqjfx Ap Dotn

Condition: excellent (used), Year of construction: 1970, turning length 300 mm Itjdpjxmahlofx Ap Dsn weight of the machine ca. 0,4 t

Condition: good (used), Conventional lathe, Pinacho model ML 18-250, year 2019. Distance between centers: 1,500 mm, main spindle bore: 58 mm, chuck diameter: 250 mm, swing over bed: 502 mm, bed width: 300 mm, Fagor Innova digital readout. Itodpfx Aszcxnwjp Den

Condition: used, Year of construction: 1996, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 434 mm Control Siemens Sinumerik 840D total power requirement 54 kW weight of the machine ca. 10 t dimensions of the machine ca. 6000x2800 mm Spindle speed (max): approx. 0–4500 rpm Spindle speed (max): approx. 0–4500 rpm Ijdpfxezrzxis Ap Dstn Spindle bore: approx. 65 mm Spindle taper: mostly DIN 55026 A6 / ISO taper X-axis travel: approx. 220 mm Z-axis travel: approx. 950 mm Feed rate: approx. 25 m/min Tools & equipment Tool turret: usually 2 turrets with ~12 tool positions Powered tools: possible depending on equipment Tailstock: optional, often NC-controlled (SK30)

Condition: good (used), Year of construction: 1975, turning length 1000 mm turning diameter over bed 430 mm turning diameter over slide rest 235 mm spindle turning speed range 11.2 - 2.000 U/min spindle bore 56.0 mm morse taper 4 MK Itedsz I Uckopfx Ap Dsn quill stroke 135 mm bed width 333 mm spindle taper DIN 55022 Gr. 6 total power requirement 7.75 kW weight of the machine ca. 1950 kg From a maintenance workshop Good condition (!!) Features: - Heavy-duty, robust conventional lead/feed screw machine - 3-jaw chuck, Ø 250 mm, including replacement jaws - "RSF Elektronik" digital display Type Z735 - MULTIFIX tool holder, with 5 inserts - "FINN SAFETY" foldable chuck guard Type SPS 400 - Sliding tailstock * Includes RÖHM rotating center point - Freely adjustable machine lamp - 1x chuck key - Chip guard - Sliding bed stop - Coolant system with drip pan

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts Isdpfx Apjzbc Dao Dotn The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Year of construction: 1973, condition: excellent (used), turning length 125 mm Itjdpfxexpxqws Ap Dsn weight of the machine ca. 0,4 t

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm Iedpfx Aszbc Dtep Detn turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: excellent (used), Year of construction: 1972, turning diameter 175 mm Itsdpeyfh Nisfx Ap Djn turning length 750 mm swing diameter over bed slide 350 mm total power requirement 4 kW weight of the machine ca. 1,2 t

Condition: used, Year of construction: 2013, turning diameter 360 mm turning length 1000 mm swing diameter over bed slide 215 mm reus 30 - 3000 U/min spindle bore 38 mm feed längs 0,043 - 0,653 m/min total power requirement 3,5 kW Itodpfx Apezfqi Re Don weight of the machine ca. 1500 kg dimensions of the machine ca. 1900 x 900 x 1300 mm

Condition: used, Year of construction: 2019, turning length 1000 mm turning diameter 210 mm swing diameter over bed slide 300 mm centre height 167 mm spindle bore 40 mm bed width 210 mm turning speeds 40 - 2500 U/min weight of the machine ca. 1000 kg. range L-W-H 2000 x 1000 x 1700 mm Features: - Digital display - 3-jaw chuck - Chuck guard - Multifix quick-change tool holder - Chip deflector - Chuck guard Iodpjzl E T Dofx Ap Dotn - Coolant system - Bed stop - Instruction manual

Condition: used, Brand: AMUTIO CAZENEUVE Model: HB 575 Distance between points: 2.000 mm Swing over bed: 575 mm Swing over slide: 300 mm Longitudinal bed width: 410 mm Machine speed ranges: 20-1.600 rpm Spindle numbers: 16 Head bore diameter: 52 mm Quill of tailstock diameter: 52 mm Quill of tailstock travel: 70 mm Machine equipped with: Iedjz E R Iwepfx Ap Dotn 4 Station turret 250 mm 3-jaw chuck Set of hard jaws Steady rest Coolant tank and motor pump

Condition: used, Year of construction: 1996, turning diameter 250 mm turning length 1000 mm Control Philips CNC-Steuerung weight of the machine ca. 8 t PHILIPS CNC control X-axis: 295 mm / Y-axis: 295 mm Center distance: 1000 mm Max. diameter on the bed: Ø 310 mm Max. diameter when turning: Ø 250 mm. Itjdpfx Aeyan R Aop Dsn Maximum turning speed: 4500 rpm. Spindle bore diameter: Ø 78 mm Turret with 8 tools Weight: approx. 8 tons

Condition: used, Year of construction: 1980, centre distance 1500 mm 3 Ijdpfoztfw Sex Ap Dstn weight 3 t ja

Condition: used, Year of construction: 2000, turning diameter 600 mm Itedpfxeydfpdj Ap Don turning length 850 mm swing diameter over bed slide 290 mm Control Siemens 840D Turning length: 850 mm Rotation diameter over table: 600 mm x-axis: 220 mm z-axis: 950 mm Control: Siemens 840D Speeds: 0-4500 rpm Tool revolver: 2 pieces Spindle bore: 65 mm Rotation diameter: 290 mm Feed rate x/y: 25 m/min Rapid traverse x/z: 25 m/min Working height: 1200 mm