Used Spinning Lathe for sale (6,023)

Condition: good (used), Year of construction: 1954, machine/vehicle number: 1749, Offer 24178 Fpodpfx Alstiym Rj Usn Technical data: - Center height 250 mm - Center width 2000 mm - larger circulation - Ø over bed 490 mm - over cross slide approx. 300 mm - Spindle bore 72 mm - Taper of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm - Feed rates - Travel of the cross slide 200 mm - Travel of the top slide 115 mm - Drive 380 V / 5.5 kW - with: - tailstock, 3-jaw chuck, steady rest - Steel holder, rotating center point, - chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Condition: good (used), Year of construction: 1974, LZ-Lathe Fabr.Boley Type: 6 LZ Year 1974 Center height : 140 mm center distance : 500 mm spindle speed : 28-3550 rpm spindle bore : 32 mm Fpodpfx Alsqw U Uws Ujn collet chuck device, 3-jaw chuck, quick-change tool holder Parat. Machine documentation available, machine can be demonstrated under power.

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are offering this machine for sale. It is connected and can be tested under power. A video of the machine can be sent via WhatsApp. Centre height above bed: 1,250 mm Maximum swing diameter over cross slide: 2,000 mm Maximum swing diameter over bed: 2,500 mm Fpsdpfx Alev Spvme Uon Maximum workpiece weight between centres without supports: 80 t Bed height: 700 mm Bed width: 3,000 mm Distance between centres: 7,000 mm Machine weight: approx. 160,000 kg

Condition: excellent (used), functionality: fully functional, For sale: this lathe, currently connected and available for testing. Accessories for the machine included. A video of the machine can be sent via WhatsApp upon request. Swing over bed: 1050 mm Distance between centers: 6000 mm Swing over carriage: 840 mm Fpsdpov Nw A Njfx Al Uon

Condition: good (used), Make: Keilinghaus Type: PLS 1500 HY Specifications Metric US Standard Max. blank / workpiece over bed 3000 Max. blank / workpiece in the gap 5000 Ø Centre height over bed 1500 mm Distance between centers 2600 mm Maximum sheet thickness 15 mm Stroke X-Axis 1000 mm Stroke Y-Axis 2800 mm Speedrange 240 Rpm Power 75 kW Spindle taper head stock DIN 55027 - Size 15 DIN / Camlock Stroke pinole quill 1200 mm Dimensions (Estimate) Length 10000 mm Width Fedpfxjkvnnkj Al Uopn 8000 mm Height 4500 mm Weight 60000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1970, LZ-Lathe Fabr.SCHAERER Type:UD500 Year 1970 overhauled 1991 Fpsdpeu Rdurjfx Al Usn With Forkadt chuck 315mm tool holder Multifix size C. Center height : 250 mm Center width : 1500 mm spindle bore: 65 mm Spindle speed : 18 - 900 rpm. Machine in good condition .

Condition: used, Year of construction: 1988, ​Ayrıntılara bakın 248 / 5.000 Çeviri sonuçları Çeviri sonucu Schutte 26 SF-DNT Multi Spindle Mechanical Lathe Fjdpfx Asld Npvol Uopn It is in working condition, our workbench can be seen in our Bursa Gemlik factory. It can be delivered as counter-adjusted specifically for your project. For this, the tooling and adjustment cost will be requested separately.

Condition: used, functionality: fully functional, Distance between centers: 450 mm Center height: 120 mm Fodpfx Aljwcxf De Ujpn Spindle bore: 23 mm Speed: 30 – 3000 rpm Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint finish: Reseda green RAL 6011. Digital display: Available upon request for an additional charge. Accessories: Additional accessories available upon request! We are also happy to offer this machine completely overhauled!

Condition: used, Year of construction: 2006, functionality: fully functional, Equipment: rotational speed infinitely variable, Manufacturer: 600 Lathes Model: Harrison V350 Centre Height: 170 mm Swing over Bed: 350 mm Swing over Cross Slide: 196 mm Swing in Gap: 535 mm Width in front of Face Plate: 165 mm Distance between Centres: 650 mm Spindle Speeds (stepless via potentiometer across 3 ranges, with digital readout): 15 - 340 rpm 45 - 1010 rpm 150 - 3250 rpm Spindle Mount (Camlock): D1-4 Spindle Bore: 54 mm Spindle Motor: 7.5 kW Carriage Guideway Width: 318 mm Cross Slide Travel: 250 mm Top Slide Travel: 140 mm Tailstock Quill Travel: 140 mm Tailstock Quill Taper: MT4 Quill Diameter: 63 mm Metric Version Machine Threads: Metric: 0.2 - 14 mm (51) Imperial TPI: 2 - 56 (56) Module: 0.2 - 3.5 (20) Diametral Pitch: 8 - 56 (20) Drive Power: 7.5 kW Equipment: 3-Axis Digital Readout 3-jaw Chuck Röhm D:200 mm 4-jaw Chuck D:160 mm Collet Chuck System Steady Rest 4-position Quick Change Toolpost Live Centre Chuck Guard Additional Chip Shield on Carriage Coolant System Rear Splash Guard Machine Documentation incl. Schematics Dimensions: Floor to Spindle Centre: 1050 mm Overall Length: 1900 mm Overall Width: 1100 mm Overall Height: 1300 mm Weight: 1350 kg The machine can be demonstrated under power on site by arrangement. All details without guarantee. Fedpfxjxcuulo Al Ujpn Errors and prior sale reserved.

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Fpedpsw I A Uxjfx Al Uen Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: excellent (used), Lead and tension spindle lathe Fpjdpfx Aleva Ef Ts Uen spindle bore 76 mm Center height 220 mm turning length 3.00 m Multifix steel holder with 5 cassettes Coolant device Operating instructions

Condition: good (used), Year of construction: 1967, LZ-Lathe Fabr.WEIPERT TYPE:UD 500 e year 1967 with digital readout ,top support feed tool holder MULTIFIX size C ,Forkardt chuck 315 mm. Center height : 250 mm Center width : 1500 mm spindle bore : 65 mm Fpedpfxju Rd H Is Al Uon Spindle speed : 14 -1400 rpm Machine is in good condition .

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Fsdpfx Aljxp Rvle Uspn

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Fpsdpfxjxp Ru Ue Al Uon

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Fodpfxsu Uh U Ie Al Ujpn

Condition: excellent (used), Voest DA 180 Voest Alpine DA 180 Conventional Lathe with Digital Readout, Year of Manufacture 1981, in Very Good Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: VOEST ALPINE Lathe Fjdpfx Alexp I D Ts Uopn Lead and feed screw lathe, Type DA 180/1, Year of Manufacture 1981 Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: MK 4 Coolant system Motor: 380 Volt, 5.5 kW 12 spindle speeds: 44 - 2,000 rpm 66 longitudinal feeds: 0.072 - 4.038 mm/rev 66 cross feeds: 0.036 - 2.019 mm/rev 66 metric threads: 0.5 - 28 mm 66 inch threads: 1 - 32 TPI 66 module threads: 0.25 - 14 66 DP threads: 2 - 112 3-jaw chuck Weight approx. 1,200 kg Accessories and Equipment: 1 piece Röhm 3-jaw chuck 200 mm Multifix size B Digital readout About the Machine: We offer a Voest Alpine DA 180 conventional lathe with digital readout, year of manufacture 1981, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Voest also runs very quietly, even at high speeds. This newer generation of lathes is very operator-friendly and can produce grind-finish-quality surfaces. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself. You can find further drilling machines from reputable manufacturers on our website.

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Fjdpfjtttigsx Al Uepn Top support : Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Tailstock: Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Sale individually or in a package possible .

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Fjdot Ipi Ispfx Al Uspn Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 750 mm, quill stroke: 110 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 22 rpm, power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Weiler Condor AC stepless rotary machine Fjdpfx Alsruqzcs Uspn

Year of construction: 2015, condition: ready for operation (used), A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible. Fsdpfsv Scrbjx Al Uopn

Condition: used, TECHNICAL DETAILS - number of spindles : 6 independent Fpedpfxjuhauys Al Ujn - bar clearance : 32 [mm] - maxi spindle speed : 6 300 [rpm] - machine equipped with 28 numerical axes - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - INDEX C200-4 control (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - KNOLL VRF 500 chips conveyor - Parts catcher with conveyor in position 6

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Fpodsy Ed Atspfx Al Uon Weight Of The Machine Ca.: 6,6 t

Condition: used, functionality: fully functional, Weiler Matador VS-2 guide and feed spindle lathe Technical data: >> Year of manufacture approx. 1970 Machine no. M1012 >> Center height 140 mm >> Center width 500 mm >> Speed: 30 – 3550 rpm >> Spindle passage 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock Fpsdpfevv Etvox Al Usn >> Tailstock MK 3 >> Feed rates from 0.010 to 1.184 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> Collet device 32 collets (set is not complete) with holder >> 1 three-jaw chuck 1 set of jaws >> 1 four-jaw chuck 1 set of jaws >> Mulifix size A with 2 steel holders >> Change gears >> Bed stop About the machine: A used Weiler Matador VS-2 is offered in a fully functional condition. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: good (used), Working diameter Ø 2400mm Fsdpfxsucdh Ts Al Uspn Max sheet thickness: 9,5 mm

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm Fpjdpfxsv Hckgo Al Ujn - Spindle speeds 18 - 1800 rpm - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg