Used Cycle Lathe for sale (8,475)

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm Ibodpfxjvzln Rs Ad Dod engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle speed (max.): 1,800 rpm, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 4,250 kg, distance between centers: 2,032 mm, COLCHESTER COMBI K4 R/600 Cycle Lathe TECHNICAL DATA & EQUIPMENT: Year of manufacture: 2003 Serial number: C535 Spindle speed: 1800 rpm Swing over bed and cross slide wings: 554 mm Centre height (over bed): 284 mm Swing over cross slide: 370 mm Swing in the gap x [length in front of faceplate]: 830 x [196] mm Spindle centre height from floor: 1238 mm Nominal distance between centres: 2032 mm Max. working length between centres: 2152 mm Spindle nose: D1-11 CAMLOCK Taper in spindle nose bush: No. 5 Morse taper Spindle bearing diameter: 145 mm Spindle bore through hole: 102 mm Spindle speed range: - Low: 4.5–450 rpm - High: 18–1800 rpm Cross slide (X-axis): - Travel (programmable limit): 290 mm Saddle (Z-axis): - Travel (programmable limit): 2032 mm Tailstock: - Quill diameter x travel: 95 x 145 mm - Morse taper in quill: No. 6 MT For further technical data, see the photographed data sheet Supplied with technical documentation as shown in the photos Supplied with accessories as shown in the photos, incl. tool holder The machine will be loaded onto a truck using an overhead crane. Please ensure suitable vehicle is provided. DIMENSIONS & WEIGHT: 6000 x 1800 x 1800 mm Iedpfx Adoxd D Rfj Debd 4300 kg COLLECTION NOTES: This item is available from October 2025. A collection appointment on a specific day from 01.10.2025 must be arranged. FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: used, Year of construction: 2002, turning diameter 570 mm turning length 3000 mm control SIN 810 D turning diameter over slide rest 345 mm spindle head DIN 55027 - Size 8 spindle bore 62 mm tailstock quill taper MT 5 spindle turning speed range 3 - 2.500 U/min total power requirement 35 kW weight of the machine ca. 7,5 t Ibjdpfsxb Ecqex Ad Djd dimensions of the machine ca. 7,50 x 2,10 x 2,00 m ManualTurn Version: V05.03.09 4-station turret SAUTER with various cartridges 3-jaw Schunk SCHUNK ROTA-S plus 2.0 Ø315-92 Tailstock Drill rod bore 100mm Fixed steady rest Ø315mm Chip conveyor bmf Bürener (new in 2025) with coolant pump Machine light

Condition: ready for operation (used), Year of construction: 1997, Padovani Labor E255 x 1500 cycle lathe Manufacturer: Padovani Model: Labor E255 x 1500 Year of manufacture: 1997 Iedpfx Adexmkv He Dsbd Condition: Used, good, powered and ready for demonstration

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm Ijdpfxeu Sbkgj Ad Djbd main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Lathe - cycle controled / Brand: SEIGER / Type: SLZ-1200 S x 8000 Year of manufacturing: 08/2000 The machine can be inspected by appointment under power. TECHNICAL DATA: Working area: Ijdexvmygspfx Ad Dobd - Peak width: 8.000 mm - Swing diameter over bed rail: 1.250 mm - Bed width: 900 mm Turning spindle: - Spindle head according to DIN 55027, size 15 - Spindle bore: 240 mm - Chuck diameter: 128 mm Permissible workpiece dimensions/weights: - between the tips without / with one steady rest: 5.000 / 7.000 kg - between the tips with with two steady rests: 8.500 kg EQUIPMENT: - CNC-Control: SINUMERIK 810D ManualTurn - 1 x faceplate, diameter: 1.000 mm - 2 x steady rests - 2 x chip conveyors - Documentation - CE marking Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: reconditioned (used), Year of construction: 2012, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2012 Spindle bore: 66 mm Center distance: 1000 mm Turn over bed: 435 mm Turn over cross slide: 200 mm Center height: 210 mm Speed range: 1 – 3500 rpm continuously variable With the following accessories: Sliding guard with interior lighting 8-station SAUTER turret with AGW and tool drive C axis via main drive 3 x VDI 30 live tools 3-jaw FORKARDT chucks Ø 250 mm 1 x fixed lynette Ø 120 mm Tailstock with extendable drilling sleeve Coolant system Coolant spray gun Chip collection tray 5 x Height-adjustable machine mounts Operating instructions THE MACHINE IS IN VERY GOOD CONDITION!! THE MACHINE WAS ONLY USED FOR TRAINING!! Ibedpewk I Anefx Ad Dsd THE MACHINE HAS ONLY 9044 OPERATION HOURS!!!

Condition: excellent (used), Cycle Lathe Weiler E 50 / 1D Year of manufacture: 1999 Machine no.: 684 Control: Weiler (Siemens 810D) Power-on hours: 43,543h (Machine was overhauled by Schmeißer a few years ago) Technical specifications: Ijdpowtqnrefx Ad Dsbd Spindle speed: 1–625 / 4–2,500 rpm (2 gear stages) Drive power: 17kW torque Spindle torque: 1,200Nm Spindle bore: 66mm Distance between centers: 1,000mm Center height: 280mm Swing diameter over bed: 570mm Swing diameter over cross slide: 340mm Equipment/Accessories: - Interface for external programming - Parat tool holder incl. 6 holders - Operating manual - Coolant system - Various turning tools and drills - Jaws for lathe chuck - Live center - Machine feet The machine has been tested under power and is in perfect, ready-to-use condition. The machine bed is also in good condition. Price: net ex works, loaded on truck from stock.

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition Ibsdpfx Adjh Hvk Aj Ded

Condition: used, Year of construction: 2001, functionality: fully functional, GILDEMEISTER - NEF 320 Listing Details Stock number: 1039-9316 Machine Type: Cycle-Controlled Lathe Manufacturer: GILDEMEISTER Model: NEF 320 Year of Manufacture: 2001 CNC Control: Manual Plus 3110 Heidenhain Location: D-59302 Oelde, Germany Country of Origin: Germany Availability: Immediate Freight Terms: Ex works location Additional Information: Cycle-controlled lathe GILDEMEISTER - NEF 320 Iodjxtpcfepfx Ad Djbd - Operating hours (power on): 21,529h WE OFFER YOU: - Workshop-inspected machines - Free loading onto truck - NO auction fees - Delivery possible (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Turning diameter: max. 320 mm Turning length: max. 740 mm CNC Control: Manual Plus 3110 Heidenhain Swing over bed: 320 mm Swing over cross slide: 150 mm Turning length: 740 mm Cross slide travel: 185 mm Distance between centers: 750 mm Main Spindle: Spindle speed range: 10 - 4,000 rpm Main spindle drive power: 11 kW Max. torque: 410 Nm Spindle nose: No. 6 DIN 55027 Front bearing spindle diameter: 85 mm Spindle bore: 50.8 mm Max. chuck diameter: 200 mm Chuck diameter: 200 mm Tool holder: Type: MultiFix - B Tailstock: Quill diameter: 70 mm Quill taper: MK 5 Quill stroke: 120 mm Feeds: Rapid traverse x/z: 8 / 10 m/min Feed force x/z: 3 / 6 kN Total power requirement: 14 kVA Machine weight approx.: 2.0 t Space requirement approx.: 3.5 x 2.5 x 2.0 m Accessories Documentation Three-jaw chuck 200 mm Tailstock Tool holder MultiFix B

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 250 mm, spindle bore: 58 mm, turning length: 930 mm, turning diameter over bed slide: 460 mm, quill stroke: 127 mm, quill diameter: 68 mm, center height: 230 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, spindle speed (min.): 40 rpm, spindle speed (max.): 3,000 rpm, bed width: 300 mm, total length: 2,500 mm, total width: 1,700 mm, total height: 1,800 mm, overall weight: 1,850 kg, torque: 1,012 Nm, travel distance X-axis: 210 mm, travel distance Z-axis: 800 mm, workpiece weight between centers: 350 g, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: rotational speed infinitely variable, Circumferential diameter over bed: 460 mm Center distance: 930 mm Max. speed range: 3000 rpm Spindle power (40/100% ED): 14/10 kW (AC drive) Max. Torque: 1012 Nm Spindle holder DIN 55029: Camlock D6 Spindle bore: 58 mm Including equipment a.o: - Siemens AC servo motors - Siemens supply and amplifier modules - Manual 3-stage gearbox - Multifix B type steel holder head - Processing area covered by 2 sliding doors and additional chuck protection for open operation - Chip tray can be pulled out to the front Ijdpfxou T Ippe Ad Dsbd - Manual tailstock - Rotating center point - Coolant system

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Iedpfx Adewxw S Ie Djbd Immediately available! Can be tested under power.

Condition: reconditioned (used), Year of construction: 2013, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Iedpfowfm Tbsx Ad Dobd Year of manufacture: 2013 Spindle bore: 66 mm Center distance: 1000 mm Turn over bed: 435 mm Turn over cross slide: 200 mm Center height: 210 mm Speed range: 1 – 3500 rpm continuously variable With the following accessories: Sliding guard with interior lighting 8-station SAUTER turret 3-jaw RÖHM chuck, Ø 200 mm Tailstock with extendable drilling sleeve Coolant system Coolant spray gun Chip collection tray 5 height-adjustable machine mounts Operating manual

Condition: good (used), Year of construction: 2007, Gildemeister lathe NEF 600 year of construction 2007 Heidenhain Plus control Turning diameter max. 600 mm Center distance 1.250 mm Swing diameter over bed 600 mm Iodpsucl Aljfx Ad Djbd Cross stroke 320 mm Main spindle: Speed range - main spindle max. 3,000 min/-1 Spindle bore 90 mm Chuck diameter 320 mm Tool turret: Number of tool positions 8 pos. Total power requirement 42 kVA Weight of the machine approx. 5.0 t Space requirement approx. 3.6 x 2.14 x 1.95 m Accessories: , flushing gun, Schunk lathe chuck 315 mm, Tailstock MK 5

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe Ijdpfx Adow E Nkie Dobd -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Condition: used, Year of construction: 1998, turning length 2000 mm 980507 x-axis 7000 mm Ibjdpfx Adow Syb De Dod z-axis 10000 mm 65 mm total power requirement 15 kW weight of the machine ca. 3,5 t

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 86 mm, turning length: 1,120 mm, turning diameter over bed slide: 500 mm, quill stroke: 180 mm, quill diameter: 80 mm, center height: 250 mm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 3,000 rpm, bed width: 350 mm, total length: 3,300 mm, total width: 2,020 mm, total height: 1,900 mm, overall weight: 2,500 kg, travel distance X-axis: 165 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: rotational speed infinitely variable, Circumferential diameter over bed: 500 mm Center distance: 1200 mm Max. speed range: 3000 rpm Spindle power (40/100% ED): 13/9 kW (AC drive) Spindle holder: Camlock D8 Spindle bore: 86 mm Including equipment a.o: - 8-station turret (Pragati BTP-80) with VDI-30 - Sliding control panel over the entire length - Pull-out chip tray - Siemens AC servo motors - Siemens supply and amplifier modules - Machining area covered by 2 sliding doors - Manual tailstock Ijdpfx Adou T Iqyj Djbd - Automatic central lubrication - Coolant system

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: SV 18RA, chuck outer diameter: 200 mm, Very well-maintained lathe for sale Iodpfx Asxv Sm Eed Dsbd

Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35" With 2 axes Siemens Sinumerik 805 Year of construction: 1995 Spindle bore: 54 mm Center distance: 950 mm Rotation O over bed: 410 mm Speed range: 4 - 3000 rpm Isdpfx Aeuzyw Dod Debd With the following accessories: PARAT tool holder with 8 pcs. inserts Chuck guard 3 Jaw chuck 0 200 mm 4 jaw chucks 0 200 mm Fixed lynette 12 - 150 mm Chip collection tray Chip guard with lighting Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: excellent (used), Excellent condition, regularly serviced (invoices available), lots of accessories! Isdjxw D S Aspfx Ad Dobd

Condition: like new (used), Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 230 mm, turning length: 1,000 mm, SPECIAL OFFER MACHINE – INVENTORY SALE Chevalier FCL-1840H with Siemens 828D control system incl. ShopTurn Used machine, year of manufacture 2023 Machine equipment: • 3-stage automatic gearbox • Movable control arm / swiveling operating panel with 10.4'' screen • Automatic central lubrication • Coolant system with reinforced coolant pump • Thread repair cycle (thread recutting function) • Tool system: Parat RD2 with internal coolant supply • Clamping device: SMW 3-jaw wedge bar chuck, diameter 210mm Features: • Siemens 828D control incl. "ShopTurn" conversational programming system and 3D simulation • Fixed steady rest 20 - 160mm / travelling steady rest 10 - 90mm • Movable control arm (along the entire centre distance) • Manual tailstock with MK5 quill • Stable, double prism guideways • Max. torque 2,750 Nm PRICE NON-NEGOTIABLE! Ibodpfoxqw D Sjx Ad Dsd SALE EX WORKS BOCHUM! SALE WITHOUT WARRANTY! PRICE INCL. TRANSPORT TO CURBSIDE AND COMMISSIONING (within Germany): €49,000 NET

Condition: used, Year of construction: 1999, control Heidenhain centre distance 1400 mm Ibedpfxow Syd Ss Ad Ded weight of the machine ca. 3,6 t

Condition: reconditioned (used), Year of construction: 2013, Cycle-controlled lathe WEILER E 40 With Siemens Sinumerik cycle control WEILER 840 D /SL 1 Year of manufacture: 2013 Spindle bore: 66 mm Center distance: 1000 mm Circulation O over bed: 435 mm O rotation over cross slide: 200 mm Center height: 210 mm Speed range: 1 - 3500 rpm infinitely variable With the following accessories: Ibsdpevkd Inofx Ad Ded Sliding guard with interior lighting Multifix tool holder with 8 pcs. inserts 8-position SAUTER turret with AGW and tool drive C axis via main drive 3 jaw chucks Schunk ROTA plus 0 250 mm 5 sets of soft top jaws, 1 set of hard top jaws Tailstock with extendable drilling quill Coolant device reinforced 5.5 bar Coolant spray gun Chip collection tray 5 pcs. Height-adjustable machine shoes Operating instructions

Condition: like new (used), Year of construction: 2022, functionality: fully functional, turning diameter over cross slide: 230 mm, turning length: 1,000 mm, PROMOTIONAL MACHINE - INVENTORY SALE Chevalier FCL-1840H with Siemens 828D CNC including ShopTurn Used machine, year of manufacture: 2022 Machine Specifications: • 3-stage automatic gearbox • Movable control arm / Swiveling control panel with 10.4'' screen • Automatic central lubrication • Coolant system with reinforced coolant pump • Thread repair cycle (thread re-cutting function) • Tool system: Parat RD2 with internal coolant supply • Workholding equipment: 3-jaw wedge bar chuck SMW, diameter 210 mm Performance Features: • Siemens 828D control system incl. dialog programming system "ShopTurn" and 3D simulation • Fixed steady rest 20 - 160 mm / follow rest 10 - 90 mm • Movable control arm (across the entire center distance) • Manual tailstock with MT5 quill • Robust, double prismatic guideways • Max. torque 2,750 Nm PRICE NOT NEGOTIABLE! Ibedpsxqw Auefx Ad Ded EX WORKS BOCHUM! SALE WITHOUT WARRANTY! PRICE INCLUDING TRANSPORT (CURBSIDE DELIVERY) AND COMMISSIONING (within Germany): €49,000 NET

Condition: like new (used), Year of construction: 2021, functionality: fully functional, turning diameter over cross slide: 350 mm, turning length: 1,500 mm, turning diameter: 540 mm, spindle bore: 85 mm, CAMPAIGN MACHINE – INVENTORY SALE Chevalier FCL-2160H with Siemens 828D control including ShopTurn Used machine, year of manufacture 2021 Machine equipment: • 3-stage automatic gearbox • Movable control arm / Rotatable operator console with 10.4'' screen • Automatic central lubrication Ibjdpsxp Dawefx Ad Dsd • Coolant system with reinforced coolant pump • Thread repair cycle (re-threading function) • Tooling system: Parat RD3 • Workholding device: SMW 3-jaw wedge bar chuck, 315 mm diameter • Chip conveyor • Coolant spray gun Performance features: • Siemens control 828D including conversational programming system “ShopTurn” and 3D simulation • Fixed steady rest 50 – 300 mm / follower steady rest 30 – 180 mm • Movable control arm (over the entire center distance) • Manual tailstock with MK5 quill • Robust double prism guideways • Max. torque 2,750 Nm PRICE NON-NEGOTIABLE! SALE EX-WORKS BOCHUM! SALE WITHOUT WARRANTY! PRICE INCL. TRANSPORT TO CURBSIDE AND COMMISSIONING (within Germany): €45,000 NET