Condition: used, Machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm No of injectors: 1 Positioning of Units by NC: yes Bszwmp8Y90 Lateral horizontal groups: yes

Condition: good (used), Year of construction: 2015, used Franke row drilling machine for slatted frames machine drilling from below with 5 drilling units with 13 spindles each, 32 mm pitch, drilling from above and adjustable in width and depth, readable via measuring scale scale, each unit can be switched on individually The support table with insertion bars and rear adjustable stop. The workpieces are clamped from above and from the side. clamped from above and from the side. The machine is started via a two-hand operation. This must remain pressed for the entire drilling process. The end of the process is indicated by a green light. with upper extraction hoods Uey7Ntnlej with 2 extraction nozzles

Condition: new, Year of construction: 2021, bore capacity in steel (diameter) 12 mm throat 220 mm bore stroke 60 mm thread capacity 6 M column diameter 70 mm bore spindle turning speed range 120-6000 U/min table-size 300x250 mm C93Cawy

Condition: used, Motor movable, Height adjustment by handwheel, Dowel drilling device, center stop, Gof3W8 adjustable angle stop, travel device ----- Technical data ----- Work table dimensions: 820x340 mm, Drilling width: 210 mm, drilling depth: 155 mm, Height adjustment: 120 mm, Speed: 1,500 and 3,000 rpm, Drill chuck: 1-20 mm, Motor: 0.9/1.4 kW, Dimensions (LxWxH): 830x1,200x1,350 mm, Weight: 220 kg Sold as is, without technical inspection

Condition: excellent (used), Catalog number 7460 TECHNICAL DATA - number of spindles 19pcs - head prepared for screw drills - distance between extreme spindles 575mm - distance between spindles 32mm - pneumatic pressure 2pcs - dimension of the table surface 1000x950mm Ugdhsf3Mkv - height to the table surface 850mm - stroke of feed cylinder 70mm - max drilling diameter 12mm - top/bottom and angle drilling adjustment - up/down adjustment of the drilling apparatus manually - main motor 2×0,75kW - dimensions L/W/H 1400x1370x1350mm - weight 568kg - Polish production - number of spindles 19pcs, drills are screwed into the ends of the spindles - used drills in the set - used drill, very good condition Net price: 5500 PLN Net price: 1250 EUR depending on the price of 4,40 EUR (Prices may change with higher fluctuations)

Condition: used, Column drilling machine Used Gxcwr0E Drilling capacity 16 mm shimming approx. 190 mm Stroke approx. 100 mm Height adjustment table approx. 300 mm Availability: short term Storage location. Solingen

Condition: used, Machine/vehicle number: 007219, Max. panel width: 1400 mm Max. panel length: 2500 mm No of Top Units: 2 Positioning of Units by NC: yes Bljqlzewn0E Lateral horizontal groups: yes

Condition: new, - New - Description: - industrial engine - User-friendly safety switch according to IP 54 - Digital drilling depth and speed display integrated in the housing - Separate emergency stop impact switch - Precision spindle bore - Safety electronics in 24 V DC voltage - Guaranteed concentricity smaller measured as 0.02 mm in the drill quill - Drilling spindle with precision ball bearings - High quality keyless chuck - drilling depth stop - Precisely machined, stable drilling table with diagonal T-slots and circumferential Cooling water channel - V-belt cover with safety switch - Cast from one piece Die-cast aluminum sleeve lever with Soft grip handles - Large, height-adjustable protective screen with safety switch - Heavy execution of the whole machine Technical specifications: Dimensions and weights Column diameter 60 mm Length approx. 565 mm Width / depth approx. 275 mm Height approx. 840 mm Weight approx. 41.5 kg Drilling performance Drilling capacity steel (S235JR) 16 mm Continuous drilling capacity steel (S235JR) 12 mm Drilling table Working surface length 235 mm Working surface width 220 mm T-slots size 12 mm Rotation 360 ° Inclination 45 ° Distance spindle - drilling table max. 325 mm Speed ​​range Speed ​​range 500 - 2520 rpm Number of speed ranges 5 Electrical data Connection voltage 230 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 530 mm Working surface length 220 mm Working surface width 230 mm T-slots size 16 mm T-slots number 2 T-slots spacing 148 mm Coedj3C3Sr spindle Quill stroke 65 mm Spindle mount MT 2 Projection 152 mm scope of delivery - Keyless chuck 1 - 16 mm - Morse taper MK 2 / B16 - T-nuts - BMP machine vice Item No. 3003010SET

Condition: new, Year of construction: 2021, bore capacity in steel (diameter) 12 mm throat 220 mm bore stroke 60 mm thread capacity 6 M column diameter 70 mm Ufqhnirvot bore spindle turning speed range 120-6000 U/min table-size 300x250 mm

Condition: used, pivotable, Dowel drilling device, pneumatic hold-down device, foot control ----- Technical data ----- Number of spindles: 19, Motor: 1.5 kW Sold as is, without technical inspection Gojnto

Condition: used, Machine/vehicle number: 007299, Max. panel width: 1400 mm Xyohv89 Max. panel length: 2500 mm No of Top Units: 2 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, Year of construction: 1992, with pneumatic stroke for drilling on 2 levels used, top equipment, many accessories make Ganner type Junior LBM320 year of construction 1992 Masch.-no. 832263 Motor 1,5 kW drill chuck 20 mm two-jaw adapter plate for drill head mounting multi-spindle drill head 8 spindles 32-32-32 / 25-25 / 32-32-35 / U = 25-25 dowel drilling device with grid workpiece stop on both sides 2-part r - li miter fence 45° center fence basic fence 1100 mm with pendulum fences 4 pieces r li each 1500 mm Bnov77Z2Ls pneumatic stroke workpiece clamp pneumatic 2 new price approx. 17.000,00 € storage location 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without warranty and guarantee

Condition: used, Machine/vehicle number: 004922, Max. panel width: 250 mm Max. panel length: 1500 mm No of Top Units: 2 Lateral horizontal groups: yes Clssnk7

Condition: new, with quick stroke system - NEW - drilling width 240 mm drilling depth 180 mm drilling stroke 160 mm 2-step motor 1400/2800 rpm instead of 2,2 kW motor speed 2800 rpm drill chuck holder 20 mm table size 600 mm x 320 mm pusher system 1 eccentric weight 246 kg item no. 300015 including accessories: 1 piece 2-step motor 1400/2800 rpm instead of 2,2 kW no. A250070 1 piece plug-in fence 90° no. A350128 1 piece lling grid system with 4 rows of holes 16,20,22,25 mm Bowden cable operation no. A300255 Wqqmsg3So 1 piece eccentric pusher with column and clamping cross no. A250055

Condition: used, No. 2005 used suitable for Scheer diameter 6 mm direction of rotation right usable length approx. 45 mm total length approx. 80 mm shank internal thread M 10 HM Bhhf2Uf storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen, without guarantee and warranty

Condition: used, used make Rapid number of spindles 3 pieces wall machine Gxbuioq upright projection approx. 500 mm storage location 97447 Gerolzhofen, free loaded, unpacked handover in as-is condition as inspected, without guarantee and warranty

Condition: new, - NEW - Standard equipment: Q0Akvriwg9 Motor 1.5 kW Spindle speed 2880 rpm Max. Spindle height above the table 160 mm Max. Drilling stroke 345 mm Max. Cross stroke 245 mm Spindle stroke 160 mm Drilling capacity 0-20 mm Max. Tool length 175 mm Eccentric clamp 1 pc Rotatable machine table 800 x 400 mm /- 45° Pivotable / rotatable drilling unit as option Tiltable machine table as option Machine dimensions 1500x1100x950 mm Machine weight 345 kg included: - Suction nozzle no. P41 55 - 2nd clamping eccentric no. P41 25 - Dowel drilling device with 4 grid dimensions no. P41 20 - Single lever operation - 2 speeds 1.5/1.9 kW 1440/2880 rpm no. P41 07 - Digital display of spindle / drilling height no. P41 34

Condition: new, - New - Description: - Easy-to-use safety switch according to IP 54 - Separate emergency stop button - Safety electrics in 24 V direct voltage - Guaranteed concentricity smaller measured as 0.03mm in the drill spindle - Drilling spindle with precision ball bearings - OPTIMUM keyless chuck in the standard scope of delivery - Precisely crafted, stable drill table with 2 diagonal T-slots and circumferential cooling water channel - Drilling depth stop - V-belt cover with safety switch - Large, height-adjustable Protective screen with safety switch Technical specifications: Dimensions and weights Column diameter 65 mm Length approx. 581 mm Width/depth approx. 397 mm Height approx. 957 mm Weight approx. 40.7 kg drilling performance Drilling capacity steel (S235JR) 16 mm Continuous drilling capacity steel (S235JR) 14 mm drilling table Working surface length 243 mm Work surface width 243 mm Type of T-slots diagonal T-slots size 14 mm T-slots number 2 360° rotation Tilt ± 45° Load capacity 15 kg Distance spindle - drilling table max. 423 mm speed range Speed ​​range 450 2500 rpm Electronic speed control control electrical data Qvwid Connection voltage 230 V Mains frequency 50 Hz machine base Distance spindle - machine base max. 599 mm Working surface length 181 mm Work surface width 187 mm spindle Quill stroke 80 mm Spindle mount MT 2 Projection 152 mm Scope of delivery: - Keyless drill chuck 1 - 16 mm - Morse taper MK 2/B16 - T-Nuts Item No. 3191080

Year of construction: 1983, Condition: used, with 2 drilling beam used, good condition manufactured by Scheer type DB 3 built in 1983 Masch.-No. 83120 number of spindles 25 piece number of drilling beams 2 Spindelabstand / grid 32 mm Ccw3Lip drilling from top hydraulic feeder brake 2 piece guide fence 1 piece ca. 2500 mm working width ca. 800 mm (768mm) drilling depth ca. 100 stroke drill chuck M 10 pendulum fence 3 piece clamp 3 piece drilling programs 4 piece required space ca. 1400 mm x 1300 mm x 1800 mm weight ca. 1000 kg located in 97447 Gerolzhofen, free on truck, unverpackt sale in current condition as seen, without revision, without guarantee and Gewährleistung

Condition: used, No. 2006 price per piece! used suitable for Scheer diameter 5 mm direction of rotation right usable length approx. 45 mm total length approx. 80 mm shank internal thread M 10 HM storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen, Rpznwyxid9 without guarantee and warranty

Year of construction: 1988, Condition: used, used, top condition make Scheer type DB 22 year 1988 machineNr. 01292 double row hydraulic feed brake number of spindles 2 x 21 number of drill beams 2 drill beam movable drill from top working width 750 mm / portal 850 mm max grid 32 mm drill holder M 10 clamps 4 pieces stop ruler 2000 mm Buyhqtva stop pins pneumatic stop pins manual lateral clamping cylinder space requirement approx. 3100 mm x 1100 mm x 1800 mm weight approx. 350 kg storage location 97447 Gerolzhofen, free on truck, unpacked delivery in as-is condition as viewed, without warranty and guarantee

Condition: new, -New- Row drilling by dowel drilling device with grid division 16/20/22/32 mm possible -Wescott Drill Chuck 0 - 16 mm as standard - Powerful engine -Easy one-hand lever operation of the Work tables for fast and precise Drill Roller guide allows the precise Procedure of the work table -Come, exact table height adjustment over a handwheel with numeric display -Installed height of the work table additionally readable via scale - An eccentric tensioner for secure Workpiece fixing included Angle stop adjustable on both sides by 60 ° Substructure with large, lockable Tool compartment equipped Technical specifications: Drilling width 300 mm Drilling depth max. at 90 ° 140 mm Working height adjustment 150 mm Work table lengthx width 500x207 mm Tool holder Wescott drill chuck Spanndurchm. of the tool 0-16 mm Spindle speed 2850 min Recording power 2.2 kW Supply voltage 230V / 50Hz Exhaust nozzle 100 mm D. Lengthxwidthxheight 905x710x1230 mm Fl023Vxte Weight 108 kg

Condition: used, Handle second hand Ayen make Type RPM 1.5 / 4 Machine no. 711630 Number of spindles 3 pieces Drilling beam / drilling head 1 piece Drilling depth 100/150 mm Drill holder M10 Bq3Xt7Rgyp Total connected load 1.1 kW Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without overhaul, without guarantee and warranty

Condition: used, Year of construction: 1994, with stop system r - l with pneum. drill feed and chipping device with multi-spindle drill head with 8 drill spindles used, top condition, top equipment, many accessories make Hoffmann type HR 150 P year of construction 1994 7Ji7U9I machine no. 16002 work piece support right left swiveling drill holder shank chuck adapter plate for drill head holder dowel drilling device raster work piece stop center stop 2 pcs. stop ruler 2100 mm with folding stops pcs. 4 - r left pneumatic stroke digital displays automatic feed workpiece clamp pneumatic 2 new price approx. 18.000,00 € suction connection D 80 mm space requirement approx. 1100 mm x 1100 mm x 1200 mm weight approx. 450 kg storage place 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without guarantee and warranty

Year of construction: 1979, Condition: used, from school operation Bvmampen used, good condition make Ayen type DB 1000 K 23 year of construction 1979 machine no. 7SA740 GS-tested number of spindles 23 pieces number of drilling beams 1 spindle distance / grid 32 mm drilling from above swiveling pneumatic hole line drilling device storage location 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed, without warranty and guarantee