Used Drill Tap Center for sale (19,305)

Condition: ready for operation (used), Year of construction: 2011, We are offering this ready-to-use CMA TRD38CN, manufactured in 2011. It is no longer needed due to the purchase of a tube laser. The machine is immediately ready for use, including clamping and workholding tools. (It had a maintenance service this year at Tuwi). Manufacturer: CMA Type: TRD38CN Cedsz Di Erepfx Acporh Year of manufacture: 2011 Condition: ready for use If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2015, functionality: fully functional, table length: 6,000 mm, positioning speed: 30 m/min, table width: 2,540 mm, working height: 1,092 mm, workpiece weight (max.): 5,000 kg, overall weight: 24,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO B254 - CNC PUNCHING, DRILLING & THERMAL CUTTING CENTER | YEAR 2015 The Ficep Tipo B254 is a CNC-controlled punching, drilling and thermal cutting center for the complete processing of steel plates and flat products in a single pass. Punching, drilling, countersinking, tapping, marking and thermal cutting via plasma and oxy-fuel are carried out on one machine without intermediate handling. CONDITION Used - technically sound. The machine is currently in productive operation and CAN BE INSPECTED UNDER POWER (by appointment). Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The system combines three processing units in one CNC-controlled line: hydraulic punching unit (1000 kN), drilling head (20.1 kW) and thermal cutting unit with plasma torch (Hypertherm HPR 260) plus oxy-fuel torch. All processes run via the Mitrol CNC as automated machining cycles; the machine processes steel plates up to 2540 x 6000 mm. Typical applications: structural steel fabrication, structural engineering and prefabrication of gusset plates, end plates and connection plates. TECHNICAL DATA - Machine type: Automatic CNC punching and thermal cutting system for plates - Year: 2015 | Serial number: 34201 | Machine weight: 24,000 kg - Working height: approx. 1,090 mm | Max. positioning weight (plate): 5,000 kg - Max. plate size: 2540 x 6000 mm | Min. plate width: 508 mm - Punching force: 1000 kN | Stripping force: 100 kN | Punching tools: 8 - Max. punch diameter: 32 mm | Max. punching thickness: 20 mm - Drilling heads: 1 | Drilling tools per head: 8 - Max. drilling diameter: 40 mm | Max. drilling thickness: 100 mm - Spindle power: 20.1 kW | Max. spindle speed: 4000 rpm - Plasma torches: 1 | Oxy-fuel torches: 1 | Plasma source: Hypertherm HPR 260 - Max. plasma cutting thickness: 35 mm (pierce start) / 60 mm (edge start) - Max. longitudinal feed speed: 30 m/min - CNC control: Mitrol CNC (master/slave), online remote diagnostics - Processes: punching, drilling, countersinking, tapping, milling, marking, scribing, oxy-fuel and plasma cutting Min. plate length, max. overall material thickness and cross positioning speed are confirmed during inspection. SCOPE OF DELIVERY - 1 x Ficep Tipo B254 plate processing center (year 2015) - 1 x Hydraulic punching unit 1000 kN with 8-position tool changer - 1 x Drilling unit 20.1 kW with 8-position tool changer - 1 x Plasma cutting torch | 1 x Oxy-fuel cutting torch - 1 x Hypertherm HPR 260 plasma cutting system - 1 x Marking unit (configuration to be confirmed during inspection) - 1 x Chip conveyor - 1 x Donaldson Torit dust extraction system | 1 x Punching tool set LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in Ficep structural steel machines. Further Ficep machines on request. Crjdpfx Aexn T H Docpsh CONTACT / INQUIRY Arrange a viewing under power | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal Cjdpforbz T Nsx Acpsrh

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, CNC Drilling and Milling Center Donau DANUSYS 2910, Year of manufacture 2002, overhauled Technical Data: Control: Heidenhain iTNC 530 Travel distances (X, Y, Z axis): 2900 / 1000 / 700 mm Milling capacity in St 60: 300 cm³/min Drilling in solid St 60: ø 40 mm Tapping: M30 Feed rate (X, Y, Z axis): 7 / 7 / 7 m/min Spindle: HSK 63, 15,000 rpm Coolant: internal (IKZ) and external (AKZ) Tool changer with 32 positions, divided into 2 x 16 slots Overhauled components: - Spindle fully overhauled and rewound by the manufacturer - Spindle controller repaired Crjdjzlx Axopfx Acpjh - Overhaul of Heidenhain power supply unit - Main computer (MC422) and control unit (CC422) checked (Heidenhain) - Carriage and guide rail of the Y-axis replaced Additional accessories: Handwheel HR 410 Chip conveyor with integrated coolant tank Documentation (operating manual, various manuals for installed components, circuit diagram, etc.) Sale ex stock; Subject to prior sale

Condition: good (used), Year of construction: 2010, Used 6-meter CNC drilling machine by CMA Type: TRD 40 CNR 6000 Crjdpfxszz N T To Acpoh Table length: 6000 mm Table width: 600 mm Max. drilling diameter: 40 mm Flow drill option Cooling system Year of manufacture: 2010

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, total length: 11,850 mm, total height: 4,016 mm, input voltage: 400 V, total width: 3,250 mm, Equipment: documentation/manual, The machine can be inspected during production. Cjdpfxezvatto Acperh A spare spindle worth €10,000.00 and a computer with software worth €3,000.00 will be supplied.

Condition: good (used), functionality: fully functional, 1 x Drilling and threading machine WMW Heckert Mikromat Well-maintained machine with complete accessories + coolant pump Technical data: Cjdpezzz E Ijfx Acpjrh Spindle speeds: 90 - 710 rpm (7 steps) Thread sizes: M6 - M30 Pitches: 1.0 - 3.5 mm The machine can be inspected while powered on.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 351.10.001.16, functionality: fully functional, workpiece length (max.): 3,000 mm, workpiece width (max.): 920 mm, workpiece height (max.): 50 mm, drilling depth: 55 mm, TECHNICAL DETAILS Maximum horizontal drilling depth: 30 mm Maximum vertical drilling depth: 55 mm Horizontal spindles: 6 Vertical spindles: 9 Spacing between horizontal spindles: 32 mm Spacing between vertical spindles: 32 mm Maximum diameter of horizontal spindles: 15 mm Maximum diameter of vertical spindles: 8 x 15 mm, 1 x 35 mm Workpiece dimensions, X-axis: 280 - 3,000 mm Workpiece dimensions, Y-axis: 180 - 920 mm Workpiece dimensions, Z-axis: 10 - 50 mm Speed, X-axis: 25 m/min Speed, Y-axis: 25 m/min Speed, Z-axis: 15 m/min Motor power, drilling head: 1.5 kW Speed, drilling head: 3,600 rpm Speed, circular saw unit: 9,000 rpm Speed, milling spindle: 24,000 rpm Diameter of circular saw blade: max. 100 mm MACHINE DETAILS Operating/ambient temperature: 15–40 °C Humidity: max. 90 % at 20 °C Operating pressure: 6–8 bar Nominal compressed air consumption: 60 l/min Crjdpfx Aezcdkwscpoh Air consumption: 1,650 m³/h Diameter of compressed air supply: 5/8" Inner diameter: 16 mm Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,605 x 1,950 mm Weight: 850 kg Operating hours (estimated): approx. 800 h EQUIPMENT Additional support roller tables

Condition: used, WFL M 35 G MILLTURN is a CNC Turning‑Milling‑Drilling Center delivering high precision, accuracy and reliability. Capacities: distance between centres 2000 mm, max turning Ø 520 mm, spindle bore 77 mm; travels Z1 1500 mm/X1 550 mm, Z2 1355 mm/X2 230 mm, Y 250(-100/+150), B 220°. Specs: main/back spindles up to 4000 rpm, 29/33 kW (551/630 Nm), driven tools 6/13 kW, milling spindle 9000 rpm 15/20 kW (165 Nm); rapid traverses Z 40 m/min X 30/10 m/min; weight ~20000 kg; size 7900×5700×3250 mm. Accessories: lamp, coolant system, paper filtration, oil mist extractor, chip conveyor, automatic load/unload, Renishaw measurement. Enables tight tolerances; suited for automotive, aerospace, medical, watchmaking and machine‑tool sectors. Cjdpfsz Dv Dbsx Acperh

Condition: used, Year of construction: 2016, Vertical CNC drilling and machining center Manufacturer: Weeke Type: Optimat BHX Year of manufacture: 2016 Technical data - Working area X: max. 3,050 mm - Working area Y: 70,850 mm - Workpiece thickness Z: 12,60 mm - Workpiece weight: max. approx. 35 kg - Number of axes: 3 - Milling spindle: 5 kW - Milling spindle speed: max. 18,000 rpm - Tool holder: HSK-F63 or ETP 25, depending on the version - Tool change: automatic tool magazine - Tool positions: 4 - Vertical drilling spindles: 13 Cedpfezy N E Hex Acpjrh - Horizontal drilling spindles X: 4 - Horizontal drilling spindles Y: 2 - Drilling unit: V13 High Speed - Drilling unit power: 2.3 kW - Drilling speed: 1,500 - 7,500 rpm - Max. drilling depth: approx. 38 mm - Drilling diameter: max. approx. 35 mm - Spindle spacing: 32 mm - Dado saw: in X-direction - Dado saw blade: approx. 100 mm - Workpiece transport: throughfeed system / transport chain - Workpiece clamping: collet gripper, vacuum-free clamping system - Control system: HOMAG powerControl / powerTouch - Software: HOMAG woodWOP - Total connected load: approx. 11.5 kW - Dust extraction connection: approx. 160 mm - Dust extraction air requirement: approx. 2170 m³/h - Weight: approx. 1500 kg - CE Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Drilling capacity: up to 10 mm Crodpfoh Hrkijx Acpsh Spindle mount: drill chuck Speed range: Pulley diameters: Motor side: 38; 48; 66; 78 mm Spindle side: 90; 104; 120; 133 mm Motor speed: 800 rpm Stroke: 100 mm Overhang: 300 mm Table: 400 x 400 mm Distance table – drill chuck max: 580 mm Distance table – drill chuck min: 130 mm Table: 400 x 400 mm Footprint: 750 x 480 mm Total power consumption: 0.4 kW Accessories/equipment: drill chuck Condition: good Weight: 170 kg Dimensions: 750 x 480 x 1,450 mm

Condition: good (used), Year of construction: 1989, Offered from an insolvency sale is a ready-to-use thread drilling machine. Manufacturer: Flott Model: SB 15 GL Year of manufacture: 1989 Machine No.: 34177063 Technical data: Cutting capacity: M2-M12 Arbor: MK 2 Quill stroke: 80mm Overhang: 200mm Chuck: Bilz WFP 1 + inserts Cjdpfxjfm S Naj Acperh Drill chuck: Röhm 0-10mm Foot switch Digital display for quill stroke Single-cycle operation Emergency stop Spindle speeds: 80-3150 rpm 380 Volt Motor power: 0.75 kW Max. distance between table and arbor: 380mm Overall height: approx. 1700mm Accessories: 8 pcs. lead screws – pitches: 1.5 – 1.25 – 1.75 – 0.8 – 0.7 – 0.5 – 0.45 – 1.0 Operating manual Weight: approx. 200 kg

Condition: as good as new (ex-display), BORING AND MILLING MACHINE BFZ 3000 for the cost-effective production of profiles and long parts made of steel, stainless steel and aluminum Demonstration machine, year of manufacture 2018 Control system: Siemens SINUMERIK 808 D Advanced max. working area x-axis 3,000 mm max. working area y-axis 260 mm max. working area z-axis 300 mm Tool holder: BT 30 Spindle speed: 4,000 rpm at i=2 (various gear ratios possible) Spindle drive power: 7.5 kW Spindle torque: 48 Nm at 40% duty cycle Rapid traverse: 40,000 mm/min Drilling capacity in S355: 26 mm Threading capacity in S355: M16 Milling capacity in S355, 40% duty cycle: 200 cm³/min Repeatability: +/- 0.05 Workpiece support height: 850 mm Space requirement L x W x H: 6,000 x 1,600 x 2,400 mm Total weight: approx. 3,500 kg Tool changer: 11-position max. tool diameter: 80 mm max. tool length: 160 mm max. tool weight: 4 kg Connections: max. electrical power: 12 kW Slow-blow fuse: 32 A Compressed air: 6 bar Minimum quantity lubrication, 3 pcs. mechanical-hydraulic vises Csdpfxozlyr Is Acperh Inspection possible by appointment.

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" Crjdpfxjw E H E Rj Acpeh - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: used, Technical specifications: Number of spindles: 27 Distance between the first and last drill: 832 mm Distance between the centers of individual spindles: 32 mm Drilling depth adjustment: 0-80 mm Number of pneumatic clamping devices: 3 Operating pressure: 6 – 8 bar Drills mounted with quick-release fittings Pneumatic spindle rotation Motor power: 1.8 kW Crodpfxozvmvhe Acpjh Manufacturer: Vitap Overall dimensions Length: 1260 mm Width: 930 mm Height: 1330 mm

Condition: excellent (used), CNC-Gantry Flexible Automatic through-feed Boring Machine with Dowels inserting system Movable panel (horizontal position of workpiece/panel), movable working head Numerical Control Power Control, Software WoodWOP Overall integral safety cabin (enclosure) of the machine Panels (workpieces) feeding by motorized belts 3 Feeding speed (m/min) 1 - 90 (ca.) Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1400 x 60 Maximum stroke of the axis (X - Y - Z) mm 3580 x 1838 x 125 Two panels simultaneously processables (in Y axe) mm 600 + mm 600 Total installed power (Kw) 38 WORKING GROUPS (TOP): Cjdpfx Aced Nvi Depsrh Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 38 + 3 special Independent horizontal boring spindles (No.) 6 Circular Grooving Saw (on X axis) dia. (mm) 100 Vertical electro-spindle (No.) 1 x SK 30 (Vertical electro-spindle motor power (Kw 6) Automatic Tools Changing System, Tools storage plate (No. 3 folds- positions) WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles (No.) 2 Horizontal drilling spindles - Right side (No.) 13 + Left side (No.) 13 Inserting nozzle and glue injectors (Right side) No. 2 + (Left side) No. 2 Storage tanks for automatic feeding of the dowels (No.) 1

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Cjdpfxszxyfzo Acpsrh Stationary machine: Yes Clamping system: Clamps Safety feature: Photoelectric cell Controls and software SCM XILOG Minimum dimensions: 3920x1170x2150

Condition: excellent (used), functionality: fully functional, TOYOSK 01C 550II-TMS Fixed 48 Multi spindle Machine Manufacturer: TOYOSK Type: 01C 550II-TMS Spindle diameter min.: M4x8 Spindle diameter max.: M4x15 Table size: 280x360mm Spindle speed: 430, 710, 1030 Codswcp Enspfx Acpsrh Power: 1.5kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings) If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, Year of construction: 2026, functionality: fully functional, ### High-Flexibility Processing for Custom Furniture Production The NANXING ND612DCT is an upgraded industrial CNC center engineered for high-precision six-sided drilling and multi-directional routing. This model is specifically designed to provide maximum flexibility for "Batch Size One" production, allowing manufacturers to handle individual custom orders with the same efficiency as mass production. ### Key Advantages & Technologies Versatile 6-Sided Processing: Capable of full six-sided drilling, front/back and side grooving, plus front/side routing in a single seamless cycle. Specialized Hardware Support: Pre-configured to process complex joinery and fittings, including Lamello joints, LogiClip connectors, wiring channels, and sky/floor door hinge mortises. Advanced C-Axis & ATC System: Features a 5.5 kW top ATC8 spindle paired with a 5.5 kW C-axis. This configuration includes a 2-slot interchangeable cross-head for 360° rotation and multi-directional side routing. Co-Linear Drilling Efficiency: The top and bottom drilling blocks are aligned co-linearly, significantly increasing processing speeds for through-holes. Industrial-Grade Build: The monolithic frame is stress-relief tempered and processed using precision Japanese SNK equipment to ensure lifetime structural integrity. ### Technical Specifications Panel Dimensions Length: 200 – 2,800 mm; Width: 50 – 1,220 mm; Thickness: 10 – 60 mm | | Max Travel Speed | X/U Axes: 135 m/min; Y Axis: 75 m/min; Z Axis: 30 m/min | | Drilling Configuration | Top: 19 vertical, 32 X-horizontal, 22 Y-horizontal; Bottom: 9 vertical Cjdpfx Aceygtidopjrh | | Main Spindles | Top: 5.5 kW ATC8 + 5.5 kW C-axis; Bottom: 3.5 kW ER25 | | Control System | SYNTEC CNC on Windows 10 platform | | Total Power / Weight | 29.2 kW / 4,900 kg | ### Standard Features & Smart Functionalities Intelligent Detection System: Equipped with high-precision sensors for automatic detection of panel length, width, and thickness to eliminate operator errors. Surface Protection: Features an automatic feeding and outfeed system with a brush device and conveyor belt to protect delicate or finished surfaces. Smart Tool Management: The user-friendly interface allows for easy tool setup and includes a life-cycle tracking function that alerts operators when tools need replacement. Open-Port Compatibility: Supports all major industry software formats, including MPR, DXF, BAN, BPP, PDX, XML, and XXL. Comprehensive Inclusions: The standard package comes with an overhead barcode scanner, mobile control console, and an air-conditioned electrical cabinet for consistent performance in any environment. ### About the Manufacturer NANXING Machinery (est. 1996) is a world-class leader in intelligent woodworking machinery. With professional assembly lines and rigorous quality control certified by CE specialists, Nanxing equipment delivers standardized performance and extreme durability for modern furniture factories.

Condition: new, functionality: fully functional, overall weight: 32 kg, input voltage: 230 V, Automatic internal lubrication – coolant is supplied directly to the core drill, increasing tool life and work quality STEPLESS speed adjustment – allows optimal matching of cutting speed to the material being machined Morse taper MK4, enabling the installation of various tools such as twist drills, countersinks, reamers, tap holders, or hole saws Powerful high-torque motor with soft start and overload protection ensures reliable operation Strong electromagnet securely holds the machine in place during operation Ergonomic control panel enables quick and intuitive setting of work parameters Robust machine construction increases stability and minimizes vibrations during machining Wide range of applications – ideal for industrial, workshop, and service use Technical specifications: Drilling diameter (core bit): 100 mm Drilling depth (core bit): 100 mm Drilling diameter (twist drill): 38 mm Spindle stroke adjustment: 275 mm Maximum threading capacity: M32 Spindle speed min.: 50 rpm Spindle speed max.: 800 rpm Speed settings – number of gears / stepless: 1. 50–110 / 2. 20–200 / 3. 200–500 / 4. 320–800 Spindle taper: MK4 Weldon shank: 19/32 mm Distance spindle / base plate: 290 mm Distance Weldon shank / max. plate: 165 mm Magnet holding force: 20,500 N Magnetic base dimensions: 245 x 125 x 50 mm Motor power: 2,580 W Voltage: 230 V Dimensions – width: 330 mm Codpoyt I Uusfx Acpsrh Dimensions – depth: 430 mm Dimensions – height: 830 mm Weight approx.: 31.5 kg

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Cedpfx Aeyxn H Nocpsrh

Condition: new, Year of construction: 2026, functionality: fully functional, Nanxing ND712D is a state-of-the-art 6-sided CNC drilling machine, equipped with two independent workstations, allowing for simultaneous processing of two panels and doubling productivity. This machine is designed for furniture manufacturers seeking speed, precision, and reliability within a compact footprint. Key Features - 2 independent workstations (1200 + 650 mm), each with a dedicated computer and processing units. - Optimized drilling blocks: up to 19 vertical drills + horizontal drills on the X and Y axes. - 4 main spindles (2 upper, 2 lower) with power up to 5.5 kW and 18,000 rpm. - Air-cushion tables for scratch-free panel handling. - Automatic dimension detector with alarm and panel compensation feature. - Servo-driven clamps and automatic side alignment system for maximum accuracy. - Advanced software + SYNTEC CNC control with user-friendly interface, supporting MPR, DXF, BPP, PDX, and XML file formats. - Barcode scanner for integration into automated production workflows. - Enhanced safety: side sensors, emergency stop, cable protection. Technical Specifications - Panel dimensions: Length 200–3000 mm / Width 30–650 mm / Thickness 10–60 mm - Max. traverse speed: X/U – 135 m/min, Y – 75 m/min, Z – 30 m/min - Total installed power: 43.8 kW Codpfexcwmqox Acpsrh - Weight: 6,300 kg - Machine dimensions: 6,620 × 4,620 × 2,378 mm - Power supply: 380V / 50Hz / 3 phase Application Areas - Medium and large-scale furniture manufacturing - Panel processing for kitchen cabinets, wardrobes, bathroom and office furniture - Complete 6-sided drilling + light milling in a single setup User Benefits - High productivity: processes two panels simultaneously - Error reduction: automatic dimension detection and precise positioning - Smart line integration: barcode scanner, compatible with ERP/CAD-CAM software - Optimal cost / maximum efficiency: one machine equals two drilling solutions

Year of construction: 1989, condition: excellent (used),

Condition: excellent (used), Twist drills and taps grinder from 1,5 to 25 mm CUOGHI model APE 25 Codpoyzpf Sefx Acpjrh

Condition: good (used), ERLO SG- 18 tapping drill CEE Table with casters Cjdpjtrdimefx Acporh Instruction booklet