Center buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Elect./Voltage: Bbu7wruygj ELDORADO #M90-0027 "MEGA 75" Deep Hole Gun DrillsSpecifications:Spindle Speeds, Infinite Range 1455 To 11740 RpmFeed Range, Infinitely Variable .100 To 99.9 Ipm(2) Spindle Motors Horsepower 3 Hp EachCoolant System Capacity 90 GallonsCoolant PressureTo 1500 PsiCoolant Flow RateTo 18 GpmCoolant Dimensions, L X W 75" X 32"Coolant Heigh t35"Note: This System Was Designed With Two SeperateDrills That Can Be Run Off Of One High-PressureCoolant [...] WITH:(2) M90-0027 Eldo... more
3

milling machining centers - vertical BEAVER Partsmaster

Lager Wilbertoord HollandNetherlands dealership location
6307 km
1995
used
x-travel 500 mm y-travel 400 mm z-travel 400 mm Control Heidenhain Zvvgszyb weight of the machine ca. 4.5 t more
6
x-travel 2800 mm y-travel 1600 mm z-travel 1250 mm Control Siemens 850 M Wrefs total power requirement 85 kW kW weight of the machine ca. 65,0 t dimensions of the machine ca. 11,0 x 15,0 x 5,0 m more
4

Center Lathe LEINEN LB

Düsseldorf Halle 1Germany dealership location
6394 km
1975
used
turning diameter over bed 130 mm turning diameter over slide rest 100 mm turning length 420 mm total power requirement 1 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,4 x 0,9 x 1,2 m - push out collet - tailstock Ly23j - 3-jaw chuck - MULTIFIX toolholder with various holders more
4

CNC Portal Milling Center Mazak AJV 60/80

ZevenbergenNetherlands dealership location
6233 km
1992
good (used)
Table size 1250 x 2240 mm. Movement x-Axis 2000 mm. y-Axis 1400 mm. z-Axis 508 mm. Number of tools in magazine 60 pieces. Maximum spindle speed 35-5.000 1/min. Tool taper MAS BT 50. Ezjqv8f0g CNC Control Mazatrol M 32 more
5
x-travel:630 mm y-travel:560 mm z-travel:560 mm spindle turning speed - stepless:12 000 U/min spindle drive:10 / 15 kW tool taper:SK 40 numbers of positions in the tool changer:24 Ssw8s0 control:HEIDENHAIN TNC 430 table-size:1000 x 600 mm total power requirement:26 kVA dimensions of the machine ca.:2,1 x 3.6 x 2,4 m weight of the machine ca.:6200 kg more
1
Elect./Voltage: 230 V, 60 Cy, 1 Ph. C0nff8p BROTHER TC-32A CNC Drill/Tap CenterSpecifications: -- X axis travel 17.71". -- Y axis travel 12.59". -- Z axis travel 16.14". -- Distance from table to spindle 7.87"-24.01". -- Table size 21.65"x13.77". -- Max load weight 176 lbs. -- Spindle speeds 12-12,000 rpm. -- Spindle taper hska40. -- Spindle drive 7.5 hp/5 hp. -- Rapid traverse 1968 ipm. -- Cutting feed 787 ipm. -- Machine dimensions (approx) 130"x70"x93"h. -- Machine weight (app... more
4

Machining Center - Vertical BEAVER partsmaster

Lager Wilbertoord HollandNetherlands dealership location
6307 km
1988
used
x-travel 500 mm y-travel 400 mm z-travel 400 mm Control GE Fanuc OM weight of the machine ca. 4.5 t 737bbi7le more
3

Machining Center - Vertical HEDELIUS BC 40 D

MönchengladbachGermany dealership location
6371 km
1996
used
x-travel:1700 ( 2 x 700 ) mm y-travel:400 mm z-travel:400 mm Caewfradw table-size:1700 x 400 mm turning speed range:30 - 9000 U/min tool magazin::20-fach tool taper:SK40 total power requirement:20 kW weight of the machine ca.:5,5 t dimensions of the machine ca.:4,1 x 2,1 x 3,0 m CNC control SIEMENS 840 D automatic toolchanger 20-pockets fixable centre wall for pendulum operation ( x-axis 2 x 700 mm ) tool breakage control chip conveyor coolant attachment more
4
HEIDENHAIN TNC430, chip conveyor, 2 x Rotoclear, Toolsetter, electronic hand wheel M0z3p more


center
every day

New machines via email!

Be informed!
3
Table size 1300 x 550 mm. Movement x-Axis 1050 mm. 3clgl2g y-Axis 510 mm. z-Axis 510 mm. Number of tools in magazine 30 pieces. Maximum spindle speed 40-12000 1/min. Tool taper DIN 69871A-40. CNC control Mazatrol Fusion 640 M NEXUS more
6

milling machining centers - vertical AXA VSC 3 - XTS

Werksstandort, unter StromGermany dealership location
6390 km
2007
used
x-axis 2600 mm y-axis 700 mm z-axis 850 mm table surface area 3060 x 800 mm tool taper HSK A63 turning speeds 1000 U/min Automatic tool changer 72 Stk. control HEIDENHAIN iTNC 530 total wight 21,5 t - 2 x zero point clamping system SCHUNK - extensive tooling - approx. 28000 hours of operation Bbw28hwwte The machine has worked in Switzerland and is in a VERY GOOD condition! more
1
Elect./Voltage: C0wwlsq BROTHER TC-323 CNC Drill and Tap MachineSpecifications: -- X 16.5". -- Y 11.8". -- Z 9.8". -- Table size 19.7" x 11.8". -- Spindle taper #30. -- Tool changer 10. -- Spindle speeds 6,000 rpm. -- Rapid feed 1181 ipm. -- Tool to tool 1.5 seconds. -- Max tool dia, length, weight 3.14"/7.87"/6.61 lbs. -- Main motor 5.5 [...] with: -- Brother CNC 520 control. -- Coolant pump and tank. -- Pallet shuttle. -- Misc manuals. -- Chip Conveyor. -- Machine weight 64... more
6
x-travel 400 mm y-travel 400 mm z-travel 500 mm drive: asynchronous - engine 6 kW turning speed programmable 18-6300 U/min x - axis + y - axis 9 Nm Liflt z - axis 21 Nm feed range stepless programmable mm/min range 2-10.000 mm/min directly way measuring all axis 0,001 mm tool taper SK 40 for tool shafts DIN 69871-A for fixing bolts DIN 69872-A tool changer for 26 tools tool clamping automatic mech./hydr. tool diameter max. 100 mm near free neighbor places 160 mm weight of tools max. 1... more
6
x-travel 2200 mm 70ykhfy3s y-travel 560 mm z-travel 720 mm Control Heidenhain iTNC 530 table surface area 2600 x 600 mm table load 2,2 t turning speeds 20 -12.000 U/min taper ISO SK 40 tool change unit 30 -fach rapid traverse 50 m/min Number of working hours ca. 25.000 h spindle hours ca.8.100 h total power requirement 36 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 4,40 x 2,45 x 2,65 m DECKEL MAHO DMG DMF 220 Linaer equipment ----- direct weighing system IKZ 60... more
5
turning diameter:900 mm turning length:6000 mm control:SIEMENS 840 D spindle bore:204 mm spindle turning speed range:10 - 1200 U/min W2ou33odw max. workpiece weight between centres:6000 kg max. workpiece weight -without tailstock:750 kg rapid traverse longitudinal:24 m/min rapid traverse cross:12 m/min total power requirement:150 kW weight of the machine ca.:56 t dimensions of the machine ca.:15 x 4 x 4 m CNC SIEMENS 840 D C-axis 0,002° driven tools, millings spindle HSK 100 automatic toolcha... more
6
Paths X/Y/Z 1600x1300x700mm HEIDENHAIN iTNC530 Spindle hours (as of Dec 2017) 10.800 h Chain tool magazine Key systems for parts & tool 18.5 kW Speed 12,000 rpm. Toolholder SK 40 Feed 20,000 mm / min. Rapid traverse 30 m / min. Table size 1,600 x 1,200 mm Table load 8,000 kg Facilities: Ethernet interface electronic hand control panel HR 410 Werkzeugwechsler-48-fach rear derailleur with double gripper Spiral chip conveyors on both sides Chip / cabins flushing system Coo... more
6

Machining Center - Horizontal HEYLIGENSTAEDT VARIMAT HC

Werksstandort, unter StromGermany dealership location
6390 km
2005
used
x-travel 4000 mm y-travel 2000 mm z-travel 1000 mm w-axis 2000 mm b-axis 360 ° Bbw278fq9d Control SIMUMERIK 840D spindle distance 2000 mm The mahcine is in a very well maintained condition and can be viewed under power at any time! more
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Bbu7t20fsa HAAS MDC-1 CNC Drilling & Tapping -- Haas 32 32 Bit Control. -- X-Axis travels 20". -- Y-Axis travels 16". -- Z-Axis travels 15.5". -- Spindle motor 15 HP. -- Spindle speed 10,000 RPM. -- Dual pallet. -- Automatic tool changer positions 24. -- Table size 15" x 26". -- Spindle taper 40. -- Under 7000 spindle hours. more

CNC Turning & Grinding Center - vertical BUDERUS CNC 235

Düsseldorf - Halle 1 - Feld 1Germany dealership location
6394 km
2008
used
chucking diameter 200 mm swing diameter 200 mm x-travel 150 mm Control SIEMENS 840D total power requirement 45 kW weight of the machine ca. t dimensions of the machine ca. m 7cb3dddmj - CNC control SIEMENS 840 D Powerline für 6 axis - loading device with workpiece conveyor - 8 - fold revolving head - sperate NC internal grinding device - coolant device with high pressure pump more
5

Center Lathe STANKO 16 K 20

Bünde/BielefeldGermany dealership location
6460 km
1983
used
turning diameter over bed 430 mm turning diameter over slide rest 220 mm turning length 710 mm centre height 220 mm spindle bore 52 mm spindle turning speed range 12,5 - 1600 U/min total power requirement 10 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,50 x 1,19 x 1,5 m Condition: ready for operation Electric 380 Volt Cooling equipment Machinelight 3 jaw chuck 310 mm carriage-rapid traverse Rapid transfer steel-holder Applicatiopns for rapid transfer steel-hol... more

5-axis MachiningCenter DMG MORI DMC 125 U

Broich 48, 51766 Engelskirchen, DEGermany
6439 km
2015
excellent (used)
X axis 1250 mm Y axis 1250 mm Z axis 1000 mm Acceleration X-Y-Z 6/4/6 m/s feeding force 15/20/28 kN NC-rotary table: Bb7n8lycxz pallet clamping surface 1000 x 800 mm max. load 2000 kg workpiece height max. 1600 mm table rotating 360 / 0,001 ° c-axis rapid travel 35 rpm NC-Milling head: swivel range -30 bis 180 ° rapid travel 30 rpm spindle taper 100 HSK spindle speed range 12.000 rpm spindle drive 35/25 KW torque 130/86 Nm max. tool length... more
5

Center Lathe LEGOOR 300 x 2.000

StockstadtGermany dealership location
6564 km
1969
used
turning diameter over bed:620 mm turning diameter over slide rest:390 mm turning length:2000 mm turning dia. in gap:850 mm spindle bore:104 mm bed width:420 mm turning speed range:20 - 1.500 1/min spindle taper:CAM-LOCK D.1-8" main drive:11 kW total power requirement:15 kW weight of the machine ca.:3.750 kg spindle motor: kW Multifix tool holder C model: steady rest:250 mm 3-jaw chuck diameter:300 mm 4-jaw face plate diameter:450 mm complete sedimentation cooling equipment: compl. documentati... more
7

Horizontal machining center OKK HM 40

Umkirch Germany dealership location
6603 km
1998
excellent (used)
The machine is still in production, in very good condition and can be inspected under power. OKK HM 40 Control Fanuc 16i-M 2-pallets Full B axis high pressure through spindle Travel: x-way: 620 mm y-way: 560 mm z-way: 560 mm Tool holder: BT 40 60 tool places Spindle speed: 12,000 rpm Pallet size: 400 x 400 mm Rapid traverse X - Y - Z axes: 40 m / min Chip conveyor Ndbnj High-pressure equipment Tools more
1
Elect./Voltage: Cxxktkg FEELER TV-510A Drill & Tap CenterSpecifications: -- Table size 27.6" x 15.7". -- X travels 20". -- Y travels 15.75". -- Z travels 15.75". -- Spindle speed 10,000 rpm -- Spindle taper 30 -- Spindle motor 5/7.5 -- Automatic tool changer positions 12Equipped with: -- Fanuc 0imd CNC control -- Chip conveyor and coolant tank more
6
x-travel 2000 mm y-travel 500 mm z-travel 600 mm table-size 2120 x 550 mm table load capacity 2000 kp feed 1 - 8000 mm/min rapid traverse X-axis 40 m/min rapid traverse Z-axis 20 m/min tool taper HSK 63 A B9rcrif spindle turning speed - stepless 0 - 16000 U/min spindle motor 20 kW spindle diameter in front bearing 70 mm control SIEMENS 840D tool diameter 63 / 126 mm toolpiece magazine: chain magazine 40 Stück tool length - max. 250 mm weight of tools max. 8 kg total power requirement 55 kVA w... more
6

Center Lathe WOHLENBERG V 1180

PartnerbetriebGermany dealership location
6460 km
1963
used
turning diameter over bed 1185 mm turning diameter over slide rest 940 mm turning length 4000 mm centre height 590 mm turning dia. in gap 1245 mm spindle turning speed range 3,5 - 1120 U/min spindle bore 102 mm max. workpiece weight 10 000 kg longitudinal feeds: 32 von 0,1 - 3,55 mm/U face feeds 32 von 0,05 - 1,8 mm/U feeds - cross 0,032 - 71 mm/U feeds - longitudinal 0,063 - 140 mm/U rapid traverse longitudinal and cross 4200 / 2100 mm/min thread - module 0,0625 - 140 M metric threading 0,25 -... more
6

Center Lathe VDF KONVENTA 530

MonheimGermany dealership location
6403 km
1999
used
turning diameter over bed 540 mm turning diameter over slide rest 330 mm turning length 3.000 mm workpiece weight max. 800 kg turning speeds 11,2 - 2.240 U/min longitudinal feeds: 0,045 - 1,6 mm/U face feeds 0,02 - 0,71 mm/U centre height 264 mm main spindle bore 62 mm total power requirement 11 kW weight of the machine ca. ca. 3,1 t Gfvhlg7v8 Accessories: One lunette Digital display more
4
x-travel 550 mm y-travel 300 mm z-travel 425 mm Control Siemens 840 D tool magazin: 12 total power requirement - kW weight of the machine ca. 3,3 t dimensions of the machine ca. - m Cppnyabg more
5
The machine is in good condition and can be inspected under power. CONTROL CNC FANUC 21-M Travel X-AXIS 300mm Y AXLE 250mm Z AXIS 250mm Table 620x270 MAX. WORKPICK WEIGHT ON THE TABLE 150kg NUMBER OF TOOLS 12 TOOL DIAMETER Ø 40mm TOOL WEIGHT MAX. 0.7kg DRILLING IN STEEL 16 mm THREAD CUTTING (Metric) M12 MILLING CAPACITY 20 cm3 / min Bb77zag837 MAXIMUM TOOL LENGTH 160mm TOOL CHANGE TIME 0.7s SPAN TO SPAN 1.9s GRINDING SPINDLE MOTOR 3.7kW LARGEST DISTANCE BETWEEN SPINDLE NOSE 17... more
1
Elect./Voltage: C2ahrgr BROTHER TC-323 CNC Drill and Tap MachineSpecifications: -- X 16.5". -- Y 11.8". -- Z 9.8". -- Table size 19.7" x 11.8". -- Spindle taper #30. -- Tool changer 10. -- Spindle speeds 6,000 rpm. -- Rapid feed 1181 ipm. -- Tool to tool 1.5 seconds. -- Main motor 5.5 [...] with: -- Brother CNC 520 control. -- Coolant pump and tank. -- Pallet shuttle. -- Misc manuals. -- Machine weight 6400 lbs. more

Center Lathe VDF- HEIDENREICH & HARBECK V 3

Düsseldorf - Halle 3 - Feld 3Germany dealership location
6394 km
1955
used
turning diameter over bed 520 mm turning diameter over slide rest 300 mm turning length 2000 mm centre height 255 mm bed width 403 mm spindle bore 62 mm spindle diameter in front bearing 120 mm spindle turning speed range 14 - 710 U/min feeds - longitudinal 0,056 - 2 mm/U feeds - cross 0,025 - 0,9 mm/U thread - mm pitch 0,4 - 224 mm total power requirement 8 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 4,3 x 1,3 x 1,6 m 7cb3wfoul - Machine with 2 steady rests - 3-jaw chuc... more
4
centering range 50 to 200 mm S2zfm9 width of roller 24 mm diameter of roller 52 mm space requirements height - 700 x width - 580 x depth - 150 mm weight approx. 165 kg more
3

Machining Center - Universal DECKEL MAHO DMU80T

Lager Wilbertoord HollandNetherlands dealership location
6307 km
2002
used
x-travel 800 mm Fdm7qnxj y-travel 650 mm z-travel 550 mm Control Heidenhain 530 more
5

Machining Center Kitamura Mycenter H500

Trippstadter Str. 110, 67663 Kaiserslautern, DEGermany
6535 km
1989
excellent (used)
OVERVIEW: Brand: Kitamura Model: Mycenter H500 Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 1989 Production hours: 23200 Location: Germany Origin country: Japan GENERAL DATA: Measurements width: 7500 mm Measurements depth: 3800 mm Measurements height: 2910 mm Machine weight: 15000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 35-8000 1/min CONTROL UNIT: Brand: FANUC Model: 15M Ndain MOVEMENT: X-AX... more
4
- 3-axis machining center Cfeukyca - control FANUC 18 M - öl flow-cooled spindle - spindle bore 70 mm - spindle motor (Fanuc AC) 5,5/75,5 kW - spindle speed 80 - 8000 1/min - 30-stations tool changer - travel range: X= 560, Y= 410, Z= 460 mm - pallet size 760x430 mm - changing pallet device - chip conveyor - IKZ tool cooling with 210 l tank - tool holder BT 40 - machine weight: ca. 4000 kg, plus devices - dimensions LxWxH: 2250 x 2850 x 2575 mm accessories: clamping pla... more
1
Elect./Voltage: F3yjfrr MAZAK "VTC-16B" VERTICAL MACHINING CENTER -- X-Axis Travel: 44" -- Y-Axis Travel: 16" -- Z-Axis Travel: 20" -- Spindle Taper: 40 -- Spindle Speed: 7,000 RPM -- Spindle Motor: 15 HP -- Tool Changer: 24 Station -- Machine Dimensions: 119" x 98" x 106" -- Machine Weight: 11,660 [...] With: -- Mazatrol M32B Control -- Coolant System -- Rigid Tapping -- Chip Conveyor more
5
turning diameter over bed:300 mm turning diameter over slide rest:160 mm turning length:500 mm centre height:140 mm spindle turning speed range:15 - 3550 U/min spindle bore:36 mm bed width:205 mm spindle head:DIN 55027 Gr.5 engine output:2,0 / 2.8 kW Ffwfp3afe dimensions of the machine ca.:1,5 x 0,8 x 1,5 m weight of the machine ca.:620 kg more
7
Deckel Maho DMC 63 V control Siemens 840 d Handwheel Siemens built in 1997 procedures X 630 mm Y 500 mm Z 500 mm spindle 20-8,000 rpm SK 40 recording tool changer 24 compartment table 800 x 500 mm Chip conveyor IKZ (internal coolant supply) 20 bar Coolant tank Rinse-gun Bed flushing Ssppq0 Spindle hours approx. 5900 The sale is carried out only to entrepreneurs in the sense of § 14 BGB more
5

Machining Center - Universal HERMLE U630T

More Hermle U 630
Lager Wilbertoord HollandNetherlands dealership location
6307 km
1997
used
x-travel 630 mm y-travel 500 mm z-travel 500 mm spindle taper SK40 spindle turning speed range 7.000 U/min number of tools 20 9qypnnndk control Heidenhain 410 more
1
turning diameter:1300 mm turning length:4000 mm control:NUM 1060 spindle speeds:1300 1/min. spindle bore:150 mm y-axis:300 mm spindle cone:SA50 Srzhd8 z-axis:4000 mm x-axis:1200 mm : c-axis: : chip conveyor: Y-axis: 4 jaw chuck:1200 mm : Used/retrofitted (2003) CNC turning and milling center TACCHI HD 1450 For more information, please see the apendix more
1
turning diameter 270 mm turning length 630 mm control Sinumerik 805 SIEMENS swing diameter 400 mm travel -x axis 200 mm travel -z axis 745 mm spindle speed: 10 - 5000 1/min C - Axis main spindle 2,5 ° spindle bore 62 mm turret head 12 Pos. tool taper VDI 30 spindle taper A6 DIN 55026 taper in tailstock-quill MK 3 tailstock travel 112 mm diameter of quill 90 mm rapid traverse X-axis 12 m/min rapid traverse Z-axis 20 m/min drive capacity - spindle motor 22 kW coolant voltage 400 V weight of th... more
1
Elect./Voltage: 240 V, 60 Cy, 3 Ph. Nccrp MIGHTY VIPER "2100-AG" VERTICAL MACHINING CENTER -- Working Surface of Table: 83" x 41.3" -- Maximum Load on Table: 6600 Lbs. -- X-Axis Travel: 81" -- Y-Axis Travel: 40" --Z-Axis Travel: 32.2" --Distance Spindle Nose To Table Top: 4.9" – 36.5" -- Distance Spindle C/L to Column: 41" -- Cutting Feed Rate: 276 IPM -- Rapid Traverse Rate: 590 IPM -- Spindle Taper: CAT 50 -- Spindle Speeds: 60 – 6000 RPM -- ... more
6
x-travel 2.100 mm y-travel 1.900 mm z-travel 1.400 mm CNC 6-axis universal machining center Keppler HDC 2000 Year of construction: 2010 Total running time (control on): 29.126 hours Control: ----- 3D control Heidenhain iTNC 530 Workspace: ----- Travel range X / Y / Z: 2.100 / 1.900 / 1.400mm NC rotary table C-axis: 360 ° infinitely variable Table size: 1,400 x 1,200mm Maximum table load: 6,000 Kg Rapid traverse: max. 30000 mm / min. Feed rate: 1-30000 mm / min.... more
3

CNC machining center Ixion 30 CNC - W Fraesmaschine

Altriperstrasse 31, 68199 Mannheim, DEGermany
6584 km
good (used)
3-axis machining centre IXION type 30 CNC-W control HEIDENHAIN TNC 355 traverse paths X 600 mm Y 400 mm Z 700 mm spindle 20-4,000 rpm SK 40 tool holder tool changer 12 tray table 800 x 400 mm 2w2k8avz Coolant system KGT of the Z axis overhaul, the machine has glass optical axes The sale is carried out only to entrepreneurs in the sense of § 14 BGB more
4

Vertical Machining Center DMG DMF 360

Rieslingstr. 31, 65375 Oestrich-Winkel, DEGermany
6525 km
2008
excellent (used)
Bb308mznyb more
1

Machining Center - Vertical KRAFT VHS 1050

HollandGermany dealership location
6564 km
2017
as good as new (ex-display)
x-travel:1020 mm y-travel:510 mm z-travel:600 mm table-size:1070x510 mm T-slots:18x5 (Breite x Anz.) mm max. table load:500 kg distance spindle center to table:100-700 mm rapid traverse in x-y-z axis:36/36/30 mm milling feed range:1-12.000 mm/min spindle speed:10.000 (direkt) 1/min spindle taper:40 BBT spindle drive:11/15 KW (BiLT 12/10000) positioning accuracy: mm repeating accuracy: mm Tool changer:30 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (leer) mm workpiece length:250 mm dim... more
4

Machining Center FADAL VMC 4020HT

More Fadal Vmc 4020
Trippstadter Str. 110, 67663 Kaiserslautern, DEGermany
6535 km
1998
excellent (used)
OVERVIEW: Brand: FADAL Model: VMC 4020HT Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 1998 Production hours: 18700 Location: Netherlands Origin country: USA GENERAL DATA: Measurements width: 2950 mm Measurements depth: 2209 mm Measurements height: 2795 mm Machine weight: 4760 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 75 - 10000 1/min CONTROL UNIT: Brand: FADAL Model: CNC 88HS MOVEMENT: X-AXIS m... more
1
Elect./Voltage: Juwq7q Mazak VTC-200/50 Vertical Machining Center -- X-Axis travel: 41.3" (1050 mm). -- Y-Axis travel: 20" (508 mm). -- Z-Axis travel: 23" (584 mm). -- Table size: 57" x 20" (1448 mm x 508 mm). -- Table load capacity: 2,640 Lbs. (1200 kg). -- Rapid traverse rate: 1181 IPM. (500 mm/sec.) -- Spindle face to table surface: 5.9" x 25.98". (150 mm - 660 mm) -- Spindle taper: CAT 50. -- Spindle speeds: 50 - 6000 RPM. -- Spindle drive: 25 HP (18.64 kw). -- Toolchang... more
4
x-travel:762 mm y-travel:406 mm z-travel:508 mm S3iqtx control:Fadal CNC88 HS table surface area:990 x 406 mm rapid traverse:10 m/min table load:0,34 t turning speed range:150 - 7500 U/min max. torque on the spindle:163 Nm power capacity - milling spindle:7,5 kW no. of tools in the magazine:21 Stück tool taper:Sk 40 weight of the machine ca.:3,1 t dimensions:2,6 x 2,6 x 2,7 m vertical machining centre Fadal 15 XT Equipment: - external coolant - RS 232 interface - Rigid tapping more


center
every day

New machines via email!

Be informed!

to

to

Change search
CENTER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close