Used Drill Line for sale (14,113)

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Ljlhswuz Dgscdw Hjhb

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Lelshzbipjhcdw Hohb Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -spindle taper: MK2 -Motor: 1.2/0.85 kW -Table size: 1175 x 355 mm -Projection: 255 mm -Speeds: 125 - 1400 rpm Ljlhcsd Tm Hnjdw Hehb -Spindle stroke: 125 mm -Dimensions: 1345/960/H1900 mm -Weight: 1212 kg

Condition: used, machine/vehicle number: 006500, Position 1: Vertical Storage Systems PRIESS-BMA DLS-CNC Position 2: CNC for Flexible Drilling PRIESS-BMA DLS-CNC Position 3: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Lolhcdowucmvjw Hjhb Position 4: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Position 5: Brushing Machines PRIESS-BMA DLS-CNC Position 6: Roller Conveyors PRIESS-BMA DLS-CNC

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year 1999 General information: Manufacturer: Kaltenbach Machine type: Automatic saw and drill line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drilling unit: KALTENBACH APS 1003 Year of manufacture: 1999 Condition: used, fully functional Location: Germany Availability: Dismantling from mid / end of March 2026 Inspection: Machine is in operation and can be inspected under power Sale: without any warranty or guarantee Machine description: For sale is a complete Kaltenbach saw and drilling line for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC and a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross-transfer conveyors. The system is currently in operation and has been used reliably for steel construction up to now. It is ideally suited for economic processing of beams and profiles for both serial production and project orders. Typical applications: - Steel construction / hall building - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-piece production Technical specifications: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre: swivels +45° / –45° to both sides - CNC-controlled length positioning - Automatic sawing operation Drilling unit APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drilling portal - Suitable for web and flange machining Roller conveyors & material handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Cross-transfer conveyor, infeed: approx. 4,000 mm - Cross-transfer conveyor, outfeed: approx. 4,000 mm Condition: - Complete and fully functional line - Currently in operation - Age- and use-related signs of wear - Sale in as-is condition - No warranty or guarantee Scope of delivery: - KBS 851 DGNC bandsaw Lhslhcdwoyak Anj Hsb - APS 1003 drilling unit - Infeed and outfeed roller conveyors - Cross-transfer conveyors (infeed & outfeed) - Control cabinet / operator unit - Existing protective and safety devices - Documentation as available Dismantling & loading: - Dismantling by the buyer - Dismantling possible from mid / end of March 2026 - On site available: * Forklift * 2 gantry cranes, each with 5 t lifting capacity - Good access and loading conditions

Condition: used, machine/vehicle number: 006601, Position 1: Panel Feeding and Loading PRIESS-BMA DLS-CNC Position 2: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Lhslswuclrshcdw Hob

Condition: used, machine/vehicle number: 005449, Position 1: Panel Tipper MORBIDELLI-FLEXA 912+FLEXA 902 Position 2: CNC for Flexible Drilling MORBIDELLI-FLEXA 912+FLEXA 902 Position 3: Automatic Dowelling Machine MORBIDELLI-FLEXA 912+FLEXA 902 Lhjlhcswucl Esdw Hsb

Condition: good (used), functionality: fully functional, Year of construction: 2008, Peddinghaus BDL 1250/9D Meba 1270 DGP CNC Drilling / Sawing Line - Year 2008. 9 spindles. Etching of beam. Lhelhcdox Ruuwjw Heb Carbide Drilling Hard stamping unit. Measuring Head. In-Feed Cross Transfers. Out-Feed Cross Transfers. 1250mm Capacity.

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. Ljlhcdwjx Ruude Hehb 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. Lhelhcdox Rut Tow Heb In-Feed Cross Transfers. Out-Feed Cross Transfers.

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm Lhjlhcox N Icljdw Hjb - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: new, Year of construction: 2026, functionality: fully functional, Edge banding machine – NB860EC - Machine with 6 edge band magazines and servo feed • Robust machine structure and most of the machine's mechanical parts are machined with advanced CNC machines for greater stability and longer life without deformation; • Combines multiple functions in one machine, including pre-milling, pre-heating, pre-melting, end trimming, servo fine cutting, servo scraping, surface scraping and polishing, spraying, all in one process. • Intelligent PC control, feed guide, belt pressing rollers, fine cutting and scraping are controlled by a servo motor. Corner rounding is adjusted pneumatically. Machine speed 16/20/24 m/min; • Nesting kit design • Fine refilling and corner rounding via HSK25 TECHNICAL DATA Panel length: ≥120 mm; ≥200 mm with rounded corners Panel width: ≥60 mm Min. Panel size: 120× 120mm; 120× 60mm long edge; 200*80 mm short edge Panel thickness: 9-60 mm Thickness C=edge: 0.4-3 mm Feed speed: 16/20/24 m/min Lhslhcox Uplxodw Hsb Power supply: 380 V; 50 Hz Required air pressure: 0.7 MPa Distance between panels ≥50 Console 2 Dust collection outlet Φ 125 mm*5 Total power: 28 Kw Approximate weight: 3,000 kg Overall dimensions: 5,930*1,050*1,850 mm 6-sided drilling CNC and double workstation ND712DTL The ND712D is designed to have 2 independent workstations of 1200+650 mm, integrating 2 machines into one, thus doubling efficiency with less space required. The integrated, high-rigidity machine body structure gives the entire machine a longer service life and fast, stable machining. The optimized drill layout makes drilling more efficient. TECHNICAL DATA Total power: 52.36 kW Machine size: 7400 * 4,620 * 2,650 mm Power supply: 380V/50Hz 3 phases Air supply: 0.6-0.7MPa Total weight: 7,850 kg Control system: SYNTEC Panel size: Length: 250-2,800 mm / Width: 250-650/1200 mm / Thickness 10-60 mm Maximum travel speed: ( X) Axis /U ) - 135 m/min Y axis - 75 m/min Z axis - 30 m/min Transmission mode X axis - Rack and pinion Y axis - Rack and pinion Z axis - Ball screw Drilling blocks: Top 2+2; Bottom 1+1 Vertical drills (top): 19*4 Horizontal drills (top): X: 3 × 8 + Y: 2 × 8 Vertical drills (bottom): 9 × 2 Maximum drilling diameter: Φ35mm Distance between holes: 32 mm Rotation speed: 5000 rpm Shank diameter: Φ10mm Main shaft: 4* ER25 Power: 2*3.5kw; 2*5.5kw max. 18000rpm

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm Ljlsd Supgehcdw Hohb max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x2500x1760 mm Weight 1500 kg Lholhcdwovz E Dxj Hob Total power requirement 4,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3900x2500x1760 mm Weight 1800 kg Total power requirement 6 kw Lhelhcdevz E Dfsw Hob

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x2500x1760 mm Lholhjvz Ewxocdw Hsb Weight 1500 kg Total power requirement 5,9 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3900x2500x1760 mm Weight 1800 kg Total power requirement 5,2 kw Ljlhcovz Evzjdw Hohb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3900x2500x1760 mm Weight 2000 kg Lelevz Evuohcdw Hohb Total power requirement 6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3900x2500x1760 mm Weight 1800 kg Total power requirement 6 kw Ljlsvz Eq Eehcdw Hehb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x2250x1650 mm Weight 2600 kg Lelhcdwjvz Elis Hshb Total power requirement 11,8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3900x2500x1760 mm Weight 2000 kg Total power requirement 11,8 kw Lhjlhcsvz Ehdodw Hjb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3900x2500x1760 mm Weight 2000 kg Ljlhcdjvz Eg Tsw Hehb Total power requirement 9 kw

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) Lhelhcjidmkredw Hsb KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: excellent (used), Through-feed Drilling ELECTRONIC LINE (3 machines), CNC controlled, J06031) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 ea) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + No. 2 endless screws to evacuate the wastes. J06032) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 Top pressing devices + No. 2 endless screws to evacuate the wastes. J06033) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. With CNC (software Tooling System + Woodmaster) Loljg Urn Ejhcdw Hohb The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Loader (Bridge Frame) "RBO" Double Station, Mod. Advantage C B) Motorized Roller table "RBO" with turning device 90° (length to crosswise) C) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 Centre A: No. 2 Electro-spindles ISO 30 (Kw 3,7 each) with tool-holder magazine with 3 places each. Centre B: No. 2 predispositions for the installation of other 2 electro-spindles No. 2 tool-holder magazines (revolver) with 56 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) D) Connection transfer, with upsidedown turning machine (180°) "RBO" Mod. Ribaltatore E) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units(1 left+1 right)with 4 BH18 heads with 18 spindles(36 right + 36 left),total 72 Centre A: No. 2 Electro-spindles ISO 30 (Kw 4,5 each) with 3 tool-holder magazine each. Centre B: No. 2 predispositions to install another 2 electro-spindles Lholhcdegvdkgjw Hsb No. 2 tool-holder magazines (chain) with 60 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit No.2 horizontal units(1 right+1 left)with 5 insertion nozzles each (5 left + 5 right), tot. 10 nozzles G) Stacker (Bridge Frame) "RBO" Double Station, Mod. Advantage SC