Used Biesse techno logic for sale

TROUGH-FEED BORING MACHINE

BIESSE TECHNO LOGIC

used

Call

Listing

Bad Oeynhausen

7709 km

Dowel boring machine

BIESSE Techno Logic

1994

used

Call

- working width (mm): 3200 - 7 supports from below: with 2 drilling units each D0mura - 2 supports from above: with 2 drilling units each - Drilling support: 1 right and 1 left horizontal

Listing

Zona Industriale "scerne"

8666 km

BORING LINE COMPOSED OF: NR. 1 TROUGH-FEED BORING MACHINE MOD. TECHNOLOGIC WITH 5 BOTTOM VERTICAL UNITS, 4 SUPERIOR UNITS, 2 HORIZONTAL UNITS NR. 1 TROUGH-FEED BORING MACHINE MOD. TECHNOLOGIC WITH 5 BOTTOM VERTICAL UNITS, 4 SUPERIOR UNITS, 2 HORIZONTAL UNITS Cjqn8rkk83

Listing

Roreto

8134 km

CNC Automatic line boring machine

BIESSE Techno Logic

excellent (used)

Call

Electronic programmer RT 483 No. 2 Through- feed motorized conveyoring belts Feeding speed (55 m/min ca.) No. 2 Horizontal units/supports No. 1 Drilling heads for each horizontal unit/support (1 x HP 1,5) No. 20 Spindles for each horizontal drilling head Ohaul Max. working width (mm) 3200 Min. working width (mm) 220 No. 7 Bottom vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Top vertical units/supports No. 2 Drilling heads/blocks ...

Listing

Cantù

8148 km

BIESSE TECHNOLOGIC LOGIC CONTROL

not inspected (used)

€1,500

Automatic Dowelling Machine

Call

Code: 0552 Brand: BIESSE Model: TECHNOLOGIC LOGIC CONTROL CNC Automatic line boring machine Technical data: Max drilling distance between horizontal heads mm 3200 Mini drilling distance between horizontal heads mm 205 Centre distance between spindles mm 32 Spindle rotation speed rpm 4000 Epkop8nrs Height of worktable from ground mm 900 Composition: N° 5 lower vertical heads N° 2 horizontal heads N° 2 upper vertical heads MACHINE SEEN AND LIKED UNDER THE CONDITIONS IN WHICH IT IS FOUND - ...

Discover more used machines

Throughfeed drilling Machines

Biesse techno

Biesse techno fdt

Forester group

Stielow inserting si66 7775

Universal drilling machines

Automatic coating machine

Automatic spray machine

Automatic gluing machine

Automatic tyre changer machine

Listing

8629 km

BIESSE TECHNO S

used

Call

Listing

Roreto

8134 km

Throughfeed drilling machine

BIESSE Techno FDT

excellent (used)

Call

Numerical Control Type NC 400 (with work cycle management software) Through-feed motorized conveyoring belts (No.) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 No. 4 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) ...

Listing

Bad Oeynhausen

7709 km

Dowel inserting machine

BIESSE Techno S

2003

used

Call

- Year of manufacture 2003 Pqfdcfa - working width (mm): 1500 - dowel insertion unit horizontal: with 8 guns each left and 8 guns right

Listing

Kežmarok

8564 km

BIESSE TECHNO FDT

2004

excellent (used)

€32,500

Call

I sell the throughfeed drilling machine with BIESSE TECHNO FDT. Year 2004 Working area: X: 215 - 32.000 mm Y: max. 672 mm (horizontal spindles 24 pcs. per 32mm offset) Z: Workpiece thickness: 9 - 65 mm min. X middle distance between vertical units: 96 mm Sxitek Configuration: 4+4 motors from under 1 bottom jumping milling unit 1+1 motors from sides per 24 spindles / 32mm 0 motors from back 4+4 motors from top 4 pcs. material pressure from top Very good condition. Available immediately. One m...

Listing

8629 km

BIESSE TECHNO FDT

used

Call

Max. panel width: 3200 mm Chf8z88hcm Max. panel length: 1200 mm No of Bottom Units: 6 No of Top Units: 3 Lateral horizontal groups: yes

Listing

Roreto

8134 km

Throughfeed drilling machine

BIESSE Techno FDT

excellent (used)

Call

Numerical Control Type NC 400 (Software Tooling System) N° 2 Through-feed motorized conveyoring belts N° 2 Horizontal units/supports N° 2 Drilling heads for each horizontal unit Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) N° 6 Bottom vertical units/supports N° 2 Drilling heads/blocks for each bottom vertical unit N° 2 Top vertical units/supports N° 2 Drilling heads/block for each top vertical unit N° 4 Vertical top pressure clamps N° 2 Motorized endless screws to e...

Listing

Kežmarok

8564 km

BIESSE TECHNO FDT

2004

excellent (used)

€34,500

Call

I sell the throughfeed drilling machine with BIESSE TECHNO FDT. Year 2004 Working area: X: 215 - 32.000 mm Y: max. 672 mm (horizontal spindles 24 pcs. per 32mm offset) Z: Workpiece thickness: 9 - 65 mm min. X middle distance between vertical units: 96 mm Configuration: 7+7 motors from under 1+1 motors from sides per 24 spindles / 32mm 0 motors from back 4+4 motors from top 5 pcs. material pressure from top Cmgci37gj3 Very good condition. Available immediately. One more BIESSE TECHNO FDT in d...

Listing

8629 km

BIESSE TECHNO FDT

used

Call

Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 7 No of Top Units: 4 Lateral horizontal groups: yes Hcz38p

Listing

Roreto

8134 km

BIESSE Techno FDT

excellent (used)

Call

Numerical Control Type NC 400 (Software) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Bslmxallkp No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top...

Listing

8629 km

Drilling And Insertion Lines

BIESSE TECHNO FDT

used

Call

Max. panel width: 3200 mm Max. panel length: 1200 mm No of Bottom Units: 7 No of Top Units: 4 Lateral horizontal groups: yes Vv7dom

Listing

Roreto di Cherasco

(dealership location)

8134 km

BORING INSERTING MACHINE

BIESSE Techno SVBL/J

excellent (used)

Call

Double-side working machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting Electronic Programmer RT 486 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) No. 6 Left-side + No. 6 Right-side 883xywkm3 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) Bottom vertical units/supports (N°) 4 Drilling heads/blocks for each bott...

Listing

8629 km

BIESSE TECHNO FDT

used

Call

Position 1: Automatic Drilling Machine BIESSE-TECHNO FDT Qdvnb Position 2: Automatic Drilling Machine BIESSE-TECHNO FDT

Listing

Roreto Di Cherasco (CN)

8134 km

BIESSE Techno FDT

excellent (used)

Call

Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 Feeding speed (m/min) 35 - 75 (ca.) Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 Bottom vertical units/supports (No.) 4 Drilling heads/blocks for each bottom vertical unit (N°) 2 Top vertical units/supports (No.) 3 Bfbpdg9jbc Drilling heads/block for each top vertical unit...

Listing

8629 km

Automatic ELECTRONIC Drilling LINE

BIESSE TECHNO FDT

used

Call

Max. panel width: 3200 mm Max. panel length: 1200 mm Cfi0r3jzcj No of Bottom Units: 7 No of Top Units: 4 Lateral horizontal groups: yes

Listing

BIESSE GROUP Techno FDT CN + Techno SDT CN

Roreto di Cherasco

(dealership location)

8134 km

BIESSE GROUP Techno FDT CN + Techno SDT CN

excellent (used)

Call

Automatic ELECTRONIC Drilling LINE with Dowels Inserting, CNC controlled, CE Mark (with cabin for full protection of the line and with 4 side doors) R10034A) Through-Feed MULTI-BORER “BIESSE” Techno FDT with C.N. - N. 2 through-feed motorized conveyoring belts, with adjustable speed from 35 up to 75 m/min - N. 2 horizontal units (each one with 2 drilling block at 11 spindles each, HP 1.5x 2) - N. 6 bottom units (each one with 2 drilling blocks with various spindles each, HP 1.8 x 2) - N. 6 top ...

Listing

8629 km

COMPLETE FACTORY FOR CABINETS FURNITURE

BIESSE TECHNO FDT

used

Call

Max. panel width: 3200 mm Max. panel length: 1200 mm Lrzhafvz No of Bottom Units: 6 No of Top Units: 4 Lateral horizontal groups: yes

Listing

IMA BIESSE HOMAG COSTA BARBERAN GIBEN CO Combima, Techno FDT, KAL, KK,

Roreto di Cherasco

(dealership location)

8134 km

IMA BIESSE HOMAG COSTA BARBERAN GIBEN CO Combima, Techno FDT, KAL, KK,

used

Call

Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) Cqtfogxo SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “F...

Listing

Roreto

8134 km

BORING INSERTING MACHINE

BIESSE Techno KS

excellent (used)

Call

Electronic Programmer NC 400 Software Biesse Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) N. 5+5 Max. working width (mm) 3200 Min. working width (mm) 235 Nmwgh Bottom vertical units/supports (N°) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Motorized carpet to evacuate chips and wastes The C...

Listing

BIESSE + RBO (BIESSE Group) Techno FDT CN + SDT CN + Tornado

Roreto

8134 km

Automatic ELECTRONIC Drilling LINE

BIESSE + RBO (BIESSE Group) Techno FDT CN + SDT CN + Tornado

excellent (used)

Call

Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various s...

Listing

Roreto

8134 km

LINE (4-SIDES) of SIZING & EDGE BANDING

IMA + BIESSE Combima + Techno FDT

excellent (used)

Call

FULL LINE of Double-side Sizing & Edge Banding with Multi Borers, max working width mm 3200. Composed of the following machines: KZ0125A) Panel infeeder (drop system), with motorised roller conveyor KZ0125B 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima Concept/II/330/A/R3 KZ0125C) "IMA" corner connection unit with "hopper feeder" (panels fall directly onto the feeding chains of the 2nd Double-side Sizing & Edge Bander) KZ0125D) 2nd Double-side Sizing & Edge Bander "IMA" Combima Con...

Listing

Roreto

8134 km

AUTOMATIC LINE of DRILLING and INSERTING

BIESSE Techno FDT

excellent (used)

Call

Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Qz2mqu3 No. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure cla...

Listing

BIESSE + RBO (BIESSE Group) 2 Techno FDT CN + 1 SDT CN + 2 Tornado

Roreto

8134 km

BIESSE + RBO (BIESSE Group) 2 Techno FDT CN + 1 SDT CN + 2 Tornado

excellent (used)

Call

Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: KZ0040) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer KZ0041) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - N° 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - N° 7 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - N° 4 top vertical units (each with 2 turnable d...

Listing

Roreto

8134 km

AUTOMATIC BORING (DRILLING) MACHINE - CN

BIESSE Techno FDT

excellent (used)

Call

Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Qq7jh28 Vertical top pressure cla...

Listing

Roreto

8134 km

BIESSE Techno FDT CN

excellent (used)

Call

ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. N. 2 Horizontal units/supports Jxw2xq Drilling heads for each horizontal unit (N°) 2 x HP 1,8 Max. working width (mm) 3200 - Min. working width (mm) 215 N. 7 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 3 Top vertical units/supports Drilling heads/block for each ...

Listing

Roreto

8135 km

DRILLING LINE with HANDLING

BIESSE + RBO Techno FDT (2) + Winner (2)

refurbished (used)

Call

FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT Csdkhtdn0 with No. 2 Horizontal Units + N...

Listing

Tulsa

103 km

Squaring/Edgebanding Lines

BIESSE - RBO STREAM SB

used

Call

Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB Position 2: Double Edgebanders BIESSE - RBO-STREAM SB Position 3: Panel Turning Device BIESSE - RBO-STREAM SB Position 4: Double Edgebanders BIESSE - RBO-STREAM SB Position 5: Automatic Drilling Machine BIESSE - RBO-STREAM SB Position 6: Automatic Drilling Machine BIESSE - RBO-STREAM SB Fiaa8cim8 Position 7: Panel Turning Device BIESSE - RBO-STREAM SB Position 8: Panel Stacking and Offloading BIESSE - RBO-STREAM SB

Listing

Jacksonville

1487 km

Biesse Stream B Edgebanders (2011)

BIESSE STREAM B

2011

excellent (used)

$20,000

CNC-Processing Centre (Windowframes)

Call

Biesse Stream B Edgebanders (2011) Cq0tanwujn Kg 6510 Stations: Coil feeder Gluing Unit Pressure Unit Premill End Trimming Unit Rough Milling Unit Fine Milling Unit MultiFunction Milling Unit Scraping Buffing Sound Enclosure Auctioneer's Note: (they have two machines and are including the second one that is not running as a parts machine) – Return conveyor not included S/N: 87560

Listing

Rosmalen

7545 km

BIESSE Winline

2014

good condition (used)

Call

BIESSE Winline Winline CNC-Processing Centre In order of our customer we've on offer this window processing line consisting; C0ygvjna General Length 250 - 4500mm Height 30 - 158mm Width 50 - 139mm Single operator CAD/CAM or PPS Integration Automatic program generation 1. Loading & Buffer Automatic infeed Automatic control of dimensions Automatic moving by means of wagons 2. Counter profiling 4x Electro spindles 2x Toolstations (for 44 toolholders) Automatic tool change Automatical positionin...

Listing

Nevers

(dealership location)

7693 km

Drilling machines

BIESSE COMIL RBO Dowel drilling line, unstacker stacker

ready for operation (used)

€43,000

CNC Machine Centres With Flat Tables

Call

Listing

Tulsa

103 km

BIESSE ROVER B FT 2231 NESTING CELL

used

Call

X axis working area: 3100 mm Y axis working area: 2200 mm Main Electrospindle power: 19 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8 Eze3ueb

Listing

Rosmalen

7545 km

CNC-Processing Centre

BIESSE MATERIA LD 4020 (5-Axis)

2020

as good as new (ex-display)

Call

BIESSE MATERIA LD 4020 (5-Axis) CNC-Machine Cr8k8konl0 Description (brief) • Materia LD 4020 (SI) • Symmetrical drive on X-axis • Axes strokes: X4000/Y2000/Z1200 mm • X-Y-Z axes drive by means of brushless gearmotors. Rapid feed rates: X85/Y60/Z60 m/min • Automatic axes lubrication • Guide covering bellows for Z-axis • Air-conditioned electrical enclosure • Siemens SINUMERIK 840D sl NC. • Suspended arm operator panel with keyboard, monitor • Technical documentation in EC language Full discrip...

Listing

Nevers

(dealership location)

7693 km

Machining centers

BIESSE Machining center Rover C6.65 - C2902

ready for operation (used)

€79,000

Call

FLEXI_CARACTERISTIQUES Capacity: 6200mm in x 1535mm in y 400mm in z 5 axis electric spindle 11kW HSK63F 10 ATS beam workbench with motorized movement (4 suction cups / beam) 15° rotation on vacuum modules Positioning defined by the numerical control and recorded on each program 14 position chain tool magazine Independent tool changer on the front panel (large diameter / blade) Windows Computer BIESSE WORK staircase software Laser and vices not included Sa...

Listing

United Kingdom

6838 km

5 Axis CNC Routers

BIESSE Rover A 1632 5 Axis

used

Call

X axis working area: 3280 mm Y axis working area: 1660 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of tool changer positions: 16 Jxztq3

Listing

Nevers

(dealership location)

7693 km

Saws

BIESSE Automatic panel saw SELCO EB75

ready for operation (used)

€35,000

CNC Machine Centres With Pod And Rail

Call

FLEXI_CARACTERISTIQUES Digitized commandIncisorCut optimisation carriage advance 60 m / min max pusher advance 40 m / min max 4 air cushion tables 2000 mm 11 collets on pusher Ijgoy0mt0 digital control panel with optimization and cutting management FLEXI_SCIAGE_LAME400 mm FLEXI_SCIAGE_EPAISSEUR4300 mm FLEXI_SCIAGE_LONGUEUR4300 mm FLEXI_SCIAGE_HAUTEUR80 mm FLEXI_SCIAGE_PINCES11 FLEXI_ALIMENTATION ...

Listing

United Kingdom

6838 km

BIESSE ROVER 24

used

Call

X axis working area: 3060 mm Y axis working area: 1300 mm Working Table: Pod and Rail Rentr Main Electrospindle power: 7.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 20 Total number of tool changer positions: 7

Listing

Nevers

(dealership location)

7693 km

Saws

BIESSE Horizontal panel saw SELCO EBT 108 ACTIVE

ready for operation (used)

€45,000

Call

FLEXI_CARACTERISTIQUES Digitized commandElectrical ascent/descentIncisorMotorized controlled incisorAir cussion tableLifting tableCut optimisation Jzvsma lifting table 4400 x 2200 mm rear loading clamp opening 100 mm aligner quick blade change Brushless motor optimization of the carriage stroke blade carriage speed max 100 m / min expulsion of cut panels at the front WINDOWS PC with cutting diagram, lists, simulation, diagnosis, maintenance, online help, statistics sucti...

Listing

United Kingdom

6838 km

ready for operation (used)

€33,000