9
Technical characteristics
Useful height 10 to 60 mm
Sold without operator feedback
Q8funtph
Touch screen
Edge magazine
Roller
Cutter
Diamond sizing
Gluing unit with pre-cutter
End cutting
Pre-gluing
Trimming
Copying unit
Edge scrapers
Glue scraper
Brush and leister
Edge strips 10 mm
Feed speed 12m/min Minimum band thickness: 0.4 mm Maximum band thickness: 3mm Power and Motors
Pluging: Three-phased Power: 18 Kw ...
13
Touch Panel Control Panel height 60 mm Solid wood 10 mm Pvc / Abs mm 3 Feed speed up to mt / min 12 Working height electronically adjustable by C.N. Panel support guide Panel introduction table to facilitate the alignment of the input panel Side roller conveyor with idle wheels for panel support Rectifier group Reel holder plate Gluing unit for EVA hot melt glue with glue pot Edge pressure group on straight profiles with pressure rollers End trimming unit with automatic inclination adjustment Gl...
10
Premilling Unit: yes
Corner Rounding Unit: yes
Max feed speed: 18 m/min
Maximum panel thickness: 60 mm
Operating Units: 8 nr
Cbkmhnrvnc
9
Control por panel táctil. Altura del panel 60mm. Espesor canto encolado max. 10mm. Espesor canto enrollado max. 3mm. Velocidad de avance hasta 12m/min. Altura de trabajo ajustable electrónicamente por C.N. Mesa de introducción del panel para facilitar la alineación del panel de entrada. Transportador de rodillos laterales con ruedas de rodadura para el apoyo del panel. Placa portarrollos. Grupo de encolado para cola termofusible. Grupo de corte transversal con ajuste automático de la inclinación...
13
Edge banding machine with return in good condition has to go due to purchase of Airtec, machine fully controlled including cleaning spray system and return system boomerang.
H2mfs8b2y
machine can be demonstrated in operation.
15
-NC control with preset programming, double saws, trimmers, scrapers, stops and corner rounding.
-Max. working panel height: 55 mm
-Min. workpiece - Length: 150 mm
-Min. workpiece - width: 70 mm
-Max. thickness of the PVC rolled edge: 3 mm
-Working speed: 12m / min
-Length: 4500 mm
-Total engine power: 18 kW
-Weight: 1700 kg
-Voltage: 400V
Pang2
7
Technical characteristics
Ccanqnuw9t
Digitized commandDiamond calibrationGlue tankEnd cut unitAffleurageCopying / Rounding unitBand scraperGlue scraperBrushes plaqueuse mono latérale automatique industrielle pour application et façonnage de chants plats en rouleaux (mélaminés, PVC, ABS, plaqués) et en bande (bois massif, formica, chants découpés, etc…)système de contrôle et de commande à contrôle numériqueécran graphique HDgroupe d’encollage avec bac 2 kggroupe d’affleura...
13
Single Sided Edge Bander and Panel Return System.
Top/bottom trimming = 18m/min
Corner rounding = 15m/min
Panel height = 10 - 60mm
Auto infeed for one coil edge magazine - NC Z-axis for edge guide
EVA Pro-Glue Kit with Pre-Melt Unit (3kg capacity)
1mm and 2mm corner rounding
Pre-milling unit with Diamond coated cutters
Fine trimming unit and 2 motors corner rounding
Cleaning Unit LPT02
Smart Touch 10" control panel
Edge Bander = 415 V, 50 Hz, 3 phases
Panel Return System = 1 connection voltage, ...
9
BIESSE AKRON 440A X Edgebander
Description:
The pressure bar is positioned via NC from the control
Extendable outrigger table
soundproof protective hood Equipped with lamps
Control panel Touch screen (10 inch color screen)
Pre milling unit (model FI-502) diamond tool 65 mm
Heating lamp (model IRL-700)
Glue pot (model VC-511-R)
Edge band feeder and cut unit for roll and strip material (model CB-500)
Pressure zone with RPT system.
Saw unit (model IN-801) saw unit pneumatically adjustable in degre...
5
Akron 1440-A SINGLE SIDED EDGE BANDER WITH NUMERICALLY CONTROLLED AXES 2019 fully equipped with additional options.
Price shown net
BASIC CHARACTERISTICS:
NC CONTROL PANEL:
The PC-PANEL control panel allows you to manage the machine and its functions:
Technical characteristics:
• 10 ”TFT touch screen, 1024x600 pixels. High definition monitor, intuitive
operation with pictures and descriptions.
• WINDOWS operating system
• Integrated 4 GB hard drive for files and program backups.
• USB port fo...
5
This machine is still in use and is available from early September.
Low hours, flat bed nesting sheet size 1260 x 3050mm.
Cax0nyjcyt
Excellent condition, can be seen working until end of August 2022
11
Numerical Control with Sintra Software Panel height 60 mm Solid mm 12 Pvc / Abs mm 0,4 - 3 Multi-Speed Kit 12, 18 mt / min Working height electronically adjustable by C.N. Adjustable inlet guide Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier group with 2 adjustable motors Reel holder plate Lamp unit to pre-heat the panel Gluing unit for EVA hot melt glue with pre-melter Edge pressure group on straight profiles with NC adjustable pressure rollers End trimmin...
11
Biesse Akron 425 edgebander
- in a warehouse
Cdb8azdgol
- year of production 2007
- Italian production
TECHNICAL PARAMETERS:
- material thickness 10 - 60 mm
- rim height 35 - 60 mm
- edge thickness 0.4 - 3 mm
- thickness of the edgeband 0.4 - 10 mm
- glue roller
- edging cuts on balls
- top / bottom milling
- simple cyclin
- radial cyclin
- polishers
- minimum material length 140 mm
- the minimum width of the material with a length of min. 140 mm - 85 mm
- the minimum width of the material w...
14
- BIESSE Akron 850 edge bander
- Year 2008
Ccdbq3tw7q
- Available from approx. October 2022
11
Used edge banding machine incl. workpiece return system
Manufacturer: Biesse
Type: AKRON 850 Automatic
Year of manufacture: 2008
Highlights
- workpiece return
- PU glue melting unit gPOD
- AKRON-MATIC 800/4 (automatic setting of the machine)
Technical data
- workpiece height 10-60 mm
- Workpiece height with form milling unit 35-60 mm
- thickness of edges in rolls 0,4-3 mm
- thickness of edges in strips 0,4-15-22 mm
- Min. workpiece length 140 mm
- Min. workpiece width (At length 140 mm) 85 mm
- ...
9
Machine is located in a small company, we work three.
It is in a very good condition.
Equipment:
Diamond milling cutter
PU glue unit with 2 quick change basins (for granules)
(one for glue color white, one for glue color natural)
incl. spraying device for release agent and cleaning agent
cross-cutting unit
Milling unit
corner copying unit
Radius scraper
Surface scraper
Buffing unit
incl. nesting version for milling unit and radius scraper
(three instead of one tracing roller)
Aggregates are cont...
15
Serial number 55468, 380 VAC, 36 A, 22 kW, 50 Hz, with 20 program places, swiveling control CNI, with keyboard, TFT monitor and mouse,
dimensions: Width min. 960 mm, max. 1685 mm,
max. height with opened cabin 2105 mm, machine height 1750 mm, working table height 900 mm, length 6500 mm
Workpiece height min. 8 mm, max. 60 mm,
edge material height min. 14 mm, max. 65 mm, edge material thickness min. 0,4 mm, max. 15 mm, max. cross-section solid wood edge 65 x 15 mm, protrusion of the workpiece on t...
15
Numerical Control with Sintra Software Panel height 60 mm Solid mm 12 Pvc / Abs mm 0,4 - 3 Multi-Speed Kit 12, 18 mt / min Working height electronically adjustable by C.N. Adjustable inlet guide Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier group with 2 adjustable motors Reel holder plate Lamp unit to pre-heat the panel Gluing unit for EVA hot melt glue with pre-melter Edge pressure group on straight profiles with NC adjustable pressure rollers End trimmin...
6
Ideal for multiple different edging applications. Up to 12mm Solid wood lipping, veneer, melamine, PVC, ABS and laminates.
Capable of up to 12mm thick solid wood lippings which is ideal for fire doors. PUR glue pot which is also essential for fire doors.
Features:
No pre miller on this machine
PUR glue pot
End trimmers
Top/Bottom profile trimmers with Bevel, 1mm radius, 2mm radius and Straight trimmers
Corner Rounding Unit
Top/Bottom profile Scrapers with Bevel, 1mm radius and 2mm rad...
15
Code: 0680
Brand: BIESSE
Model: AKRON 430/AT - CE Standard
Automatic edge bander with grinding unit for edgebanding solid wood, chipboard, veneer, Pvc, Abs and melamine panels - CE Standard - Year 2009
Technical data:
Panel height mm 10/60
Edge thickness max mm 10
Panel length min mm 140
Panel width min mm 85
Qg7vt
Belt feed speed 12 mt/min
Electronic control panel with USB port for data loading - Sintra software
Grinding unit for panel grinding -N° 2 motors each Hp 2,4 rpm 12000
Tools d...
12
BIESSE Akron 1330 Edgebander
Technical description:
Panel height mm 10-60
Height of edge banding material mm 14-64
Thickness of edge banding material in rolls / strips mm 0.4-8
Panel protrusion from track mm 25
Min panel length mm 150
Min panel width (with length mm 150) mm 85
Min panel width (with length mm 250) mm 50
Track feed speed m/min 12
Dust extraction system for each operating unit 1 hood dia. mm 100
Pneumatic connection bar 7
Glue pot capacity kg 2 (approx.)
Glue pot heating time at ½...
15
Our client has a year 2019 NEW WN250 Beam Saw and AKRON 1435-A Edgebander, hardly used.
They also have a year 2012 Rover A 1332 ATS 5 Axis CNC machine.
B3q02jou8q
The machines can be split and purchased seperately if required.
9
Edgebander complete with refixtures and rounders
W30fgis7
14
Sectioning angle. Biesse Selco mod WNA.
Measures 4400x2200.
Pxd0d
With clamps.
15
X axis working area: 3280 mm
Jxztq3
Y axis working area: 1660 mm
Working Table: Pod and Rail
Main Electrospindle power: 13 KW
Number of controlled axes: 5 axes
Total number of tool changer positions: 16
14
Beam saw BIESSE SELCO Selco EBL 110
Year of manufacture 2000
Cutting capacity 4450 x 4300 mm
Main saw motor 15kW
110 mm saw height
Scoring saw motor 2kW
200 mm scorer
B9so3qoefb
Installation dimensions 7110x7900mm
7
Technical characteristics
for drilling, grooving, shaping and machining
compact, flexible and precise solution
ideal for craft workshop, prototype workshop or special production
5 sides machining center
adjustment, piece clamping to the unit to save adjustment time
mobile probes and collets
automatic zeroing
min / max panel dimensions:
X = 200/2500 (3200)
Ccapsszx8r
Y = 70/900
Z = 10/70
machining spindle
+ BH17 drilling spindle (10 vertical and 6 horizontal)
+ groove Ø 120 mm ...
6
Nutzbare Schnittlänge : 4300 mm x 4400 mm
Spannzangenöffnung : 85 mm
Anzahl Spannzangen : 7 Stk
Sägeblattüberstand : 90 mm
Leistung Motor Hauptspindel : 11 / 13,2 kW
Durchmesser Hauptsägeblatt : 355 mm
Leistung Motor Vorritzer : 2,2 / 2,6 kW
Durchmesser Vorritzsägeblatt : 200 mm
Co3opki
Vorschubgeschw. Sägewagen Vorlauf : 1 - 120 m/min
Monitor : Farbe
Anzahl Auflagetische : 3
Breite Auflagetisch : 620 mm
Länge Auflagetisch : 2050 mm
Anzahl Absaugstutzen : 4 Stk
Durchmesser Absaugstutzen : 3x 1...
12
Premilling Unit: yes
Corner Rounding Unit: yes
B9sivelqme
Max feed speed: 12 m/min
CNC Machining Center  Biesse Rover 27
Year of construction 2000
380V
20kW
working field
X 3432mm
Y 1300mm
Z 155mm
ax stroke
X 3979mm
Y 1685mm
X 250mm
Bore unit
Spindles or vertical bore 20
Spindles or horizontal bore 8
Jag8murxc
6
Technical characteristics
Beam table
HSK63 electrospindle
Qov92
4 axes
drilling unit 24 vertical spindles, 6 horizontal
milling group
X-groove saw blade
8 beam worktop, adjustable suction cup
work areas
clamping vices
BIESSE WORKS software and panel optimization X working plan dimensions: 3390 mm Y working plan dimensions: 1850 mm Z working plan dimensions: 180 mm Power and Motors
Overall dimensions