Used Hand Edge Banding Machine for sale (69,671)

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Crsdpfjwkba Tjx Anwsb Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW Codpfx Aowka S Isnwsrb - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: Credpfx Ajwka H Senwjb - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes Cjdew S Dmdopfx Anwsrb 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Cedpfxoxy Tm Ie Anwjrb

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear Crjdpfx Anjy Id Nlowsb - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Cjdpsyzxa Eofx Anwjrb Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection Cedsu R S Nwjpfx Anwerb - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: new, Year of construction: 2025, Pre-milling unit: yes Pre-milling material removal: 0 - 2 mm Plastic edges: 0.4 - 3 mm Solid wood edges: 0.5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum workpiece length: 120 mm Minimum workpiece width: 110 mm Anti-adhesive spray unit: yes Edge preheating device: yes Crodpjl D Rx Uefx Anwjb Glue application unit: Granulate / quick-change glue tank kit End trimming unit: yes Flush end trimming unit: yes Corner rounding unit: yes Flush radius trimming unit: yes Radius scraper unit: yes Flat scraper unit: yes Buffing unit: yes Cleaning spray unit: yes Power consumption: 5 kW Machine length: 3,774 mm Machine width: 1,546 mm Machine height: 1,337 mm Weight: 842 kg

Condition: used, Storage location: Sonnefeld Csdpfx Aneway Dcewerb

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Crjdpsvvkd Tsfx Anwjb

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Crjdpfx Asvvkfdenwjb

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Csdjvvkfqjpfx Anwsrb

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Cjdjvvkfwopfx Anwjrb

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Crsdpfoxyiilsx Anwsb Storage location: Nattheim

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Crodpfsymcrbox Anwsb Storage location: Nattheim

Condition: used, Year of construction: 2019, machine/vehicle number: MR002728, Used: edge banding machine for applying edge band and solid strips up to a thickness of 5mm. Equipped with a combined milling unit for longitudinal and cross edges. Machine features include pre-milling unit, end trimming operations, and an additional glue pot. The machine comes with the following options: - Radius scraper unit - Brush unit - Glue scraper unit - Quick-change system for glue tank - Spare glue tank Technical specifications: - Minimum edge band thickness: 0.4 mm - Maximum edge band thickness: 3 mm - Maximum strip thickness: 5 mm - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Minimum panel length: 120 mm - Minimum panel width: 110 mm - Exchangeable glue pot: Yes - Feed speed: 7 m/min - Glue tank capacity: 0.8 kg - Pre-milling unit present: Yes - Pre-milling tool diameter: 80 mm - Pre-milling tool height: 56 mm - End trimming unit: HM saw blade - End trimming unit saw blade diameter: 125 mm - End trimming unit speed: 12,000 rpm - Radius and straight milling unit: Yes - Milling tool diameter: 58 mm - Milling unit speed: 12,000 rpm - Radius scraper unit: Yes - Glue scraper unit: Yes - Anti-adhesion spray unit: Yes - Brush unit: Yes - Cleaning spray unit: Yes Crodpfx Aney I Rf Hswjb - Serial number: KK00006654

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Codpfow Aig Sox Anworb Storage location: Customer.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Credpfx Anjwlbxlowjb Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), Catalogue number 7963 TECHNICAL DATA Credpfjyzy D Sjx Anwsb Equipment: - disc - heating strip - guillotine - glue tank (granulate) - tape feeder - guillotine - 3 pressure rollers - finishing unit with saw blades - 2 milling units for edge profiling (radius cutters) - scrapers – for removing excess glue - 2 polishers - workpiece thickness 10-60mm - edge band thickness 0.4-5mm - pull-out support table - feed speed 9m/min - total power 5.5kW - extraction port diameter 120mm - dimensions (L/W/H) 3100/1080/1470mm - weight 670kg ADVANTAGES – DTR technical documentation – not repainted – Austrian manufacture – year of production: 2010 – perfect condition – used edgebander Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In the case of larger exchange rate fluctuations, the price may change)

Condition: new, Catalogue No.: HZ014 – Pre-milling – Corner rounding – Brand new machine in stock – CE certificate – Professional grade TECHNICAL DATA Panel thickness: 8–45 mm Edge thickness: 0.4–3 mm Min. panel width: 90 mm Min. panel length: 170 mm Feed speed: 9 m/min Pre-milling speed: 12,000 rpm Front/rear milling: 12,000 rpm Top/bottom milling: 12,000 rpm Corner rounding: 12,000 rpm Polishing: 3,000 rpm Feed motor power: 1.13 kW Glue tank heating power: 1.315 kW Pre-milling motor power: 1.5 kW Preheating power: 0.4 kW Glue spindle power: 0.25 kW Front/rear milling motor power: 0.22 kW Top/bottom milling motor power: 2 × 0.37 kW Corner rounding motor power: 0.37 kW Polishing motors: 0.12 kW and 0.18 kW Total motor power: 6.16 kW Cedpfeyy Nf Asx Anwjrb Working table height: 960 mm Extended support width: 560 mm Extraction port: 3 × 125 mm Dimensions (L × W × H): 3731 × 720 × 1636 mm Weight: 915 kg Holzing G-MAX 480 straight-line edge bander with pre-milling, saw cutting, top-bottom milling, corner rounding, radius scraper and polisher ensures a high-quality finish on the workpiece. It handles edge banding from coils up to 3 mm thick and strips up to 4 mm thick. The machine is equipped with a 1.2 kg capacity glue tank. Net price: 98,000 PLN Net price: 23,300 EUR based on an exchange rate of 4.2 EUR (Prices may change in the event of significant fluctuations)

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Crjdpfxeyg Ecvo Anwsb Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2004, total height: 2,100 mm, total length: 7,400 mm, total width: 1,100 mm, overall weight: 3,200 kg, Equipment: CE marking, No. 3267 Edgebander / edge banding machine Brandt KDF 680 Used, year of construction 2004 Workpiece thickness 8 - 60 mm Edge thickness 0.4 - 12 mm Control system Brandt Power Control PC 16 Joint milling unit Gluing unit Quickmelt Combination milling unit for flush milling, chamfer milling, radius milling Trimming unit automatically adjustable from chamfer trimming to straight trimming via program Rounding unit (front side) Profile scraper unit / Rounding scraper unit Surface scraper unit Buffing unit for polishing edges Release agent spray system Special equipment: Hot-air system Schugoma HDL3020 (retrofitted) Hot-air process for processing laser edges (co-extruded edge) to create a visually seamless joint Transport dimensions approx. 7400 x 1100 x 2100 mm LWH Weight approx. 3200 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Credjy Df N Sjpfx Anwsb Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: new, 0 0,4 - 3 mm Workingpiece thickness from to 9 - 60 mm Feed speed stufenlos 8 - 12 m/min. Codpfxsy Ay Akj Anworb total power requirement 15 kw Dimensions (L/W/H) 4.290 x 840 x 1.690 mm

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER Credpou R Sy Aefx Anwsb -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -