Double edging machine buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
x-travel 8000 mm y-travel 2500 mm workpiece height 2360 mm M3d28q89f table width 2240 mm table length 10100 mm weight of the machine ca. 110 t dimensions of the machine ca. 20x8,5x5,2 m more
6
x-axis: längs/ longitud. Tisch/table 1800 mm y-axis: quer / transverse 1500 mm z-axis: Hub / stroke 400 mm Ebevm8z W-axis (spindle longitudinal): 500 mm distance between columns: 1560 mm distance between table/spindle: min:100 mm distance between table/spindle: max:1400 mm sleeve diameter: außen/ exterior 200 mm tool taper: SK 50 clamping surface area: 1400x2240 mm number of T-slots: 9 (22H7) table height over floor: 950 mm range drill spindle revolution per minute: 18-1800 U/min range of r... more
6
spindle diameter 125 mm x-travel 1120 mm y-travel 710 mm w-axis 630 mm z-axis 315 mm table surface area 900 x 1400 mm table load 2000 kp feed range - boring 0,025-2,24 mm/U turning speed range n:20 36-2240 U/min rapid travel z-direction 2500 mm/min rapid travel w-direction 1400 mm/min electrics - voltage/frequency 380/50 V/Hz spindle taper SK 45 total power requirement 11 kW weight of the machine ca. 9 t dimensions of the machine ca. 3,9 x 2,6 x 2,9 m - 2-axis DRO Ljiyd - exhauster - vario... more
3
Siemens 6SL3120-2TE21-8AA0 double motor modules, serial number according to the photo, used, low wear, 100% functional, included with com. photos 8tmj9dgyu more
3
Machine for cutting and double-endworking SIN-O-MATIC, used 6-fold switching cross for machining tube fix lengths 10mm – 200mm Cutting to length from the bar, both sides planing, internal and external chamfers Tubes and solid bars Ø8 – Ø30mm thin-walled tubes up to 2,5mm wall thickness up to Ø50mm length measurement and mandrel test with goodpart separation few operating hours Eybajdm0i more
5
Required air-pressure 5 bar Air consumption 24 l/min. gearing angle ° total connection load 1 kVA weight of the machine ca. 0,5 t dimensions of the machine ca. 1,6 x 1 x 2,1 m measurements: Two flank transmission error Double flank tooth tangential composite deviation Roller rotation deviation Qmq0p09ur Dimension of the double flank rolling distance Damage (knock-amplitude max. Distance from the center outward to the inner shaft: 165 mm more
6
Multi purpose edge grinding machine for very many grinding With oscillation and profile sanding unit double-sided use solid loops and veneer sanding side The special feature of this machine is the very universal profile sanding unit, see the last photos Electric belt oscillation, no air connection necessary Baaege3xzh 150mm belt width Grinding unit electrically height-adjustable Drive motor 400V / 3 kW for grinding unit and 2, 2kW for profile unit Possibility of grinding with grin... more
5
Saw- 350 x 3,2/2,6 x Z96 Scale Double cutting 90 ° - 3800 mm Baerhd0b8o Pneumatic maintenance of the material Overall dimensions : 4550 mm x 1100 mm x 1500 mm Weight : 800 kg Max saw dimension - 350 mm Min saw dimension - 340 mm Diameter hole saw - 30 mm Year production - 1999 more
2
grinding dia max continuous grinding 80 grinding dia rotary grinding 80 grinding dia min rotary grinding grinding wheel diameter 600 mm grinding wheel speed 45 m/sec workpiece width - max. 80 mm max. workpiece diameter 65 mm grinding spindle drive 2 x 21 kW spindle stroke 190 mm spindle turning speed range 300 - 1100 U/min control SIEMENS 840D total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. m Double-disc grinder with - NC-controlled transport di... more
3
Siemens 6SL3120-2TE21-8AA0 double motor modules, S T UN2034985, second-hand, normal wear, 100% functional 9ewb00ucw more


double edg...
every day

New machines via email!

Be informed!
5
x-travel 2210 mm y-travel 820 mm workpiece height 860 mm table-size 2000 x 750 mm length of stroke min./max. 163 - 2210 mm column daylight 850 mm work speed 5-55 m/min return speed 5-75 m/min cross rail adjustment - horizontal 880 mm cross rail adjustment - vertical 250 mm side head - cross travel 250 mm side head - vertical travel 850 mm Qmohuudt2 feeds crossrail slide horiz 0,1-10/vert. 0,1-5 mm/min feeds side carriage 0,1 - 5 mm/min workpiece weight 5400 kg pulling power 4000 kg total power ... more
6
Description: Complete system with DIMECO Abwickeln reel, DIMECO indicative machine and ARKU Roll feed for band 600 mm x 1-5 mm. 8zm9yp Technical details / accessories / additional: Pressure 200 t Stroke 20-140 mm Stroke rate 20-100 stroke/min Table size 1010 x 900 mm Tappet adjustment 0-100 mm Number of connecting 2 PCs Total power demand 18 kW Machine weight approx. 18 t Dimensions approx. 10 x 2 x 4 m Changes and error in the technical data and equipment reserved. more
5
max. wheel diameter mm gear width mm gearing angle ° Required air-pressure 5,00 bar Air consumption 24 l/min. total power requirement 1,00 kW weight of the machine ca. 0,50 t dimensions of the machine ca. 1,60 x 1,00 x H2,10 m KLINGELNBERG ZW-S double flank rolling Testing Machine measurements: Two flank composite deviation Dual-edge tooth tangential composite deviation Gcvgxsn Rolling runout deviation Dimension of the double flank rolling-on distance Damage (KLOPFER-amplitude) max. Dis... more
4
Communication No.: Lg 30017 Double column - eccentric press Heilbronn REPZ 500 second-hand machines-no. 5437 Built in 1990 with -2 connecting rod engine Mvgrn -Drive direct on flywheel -continuously adjustable drive -hydr. Coupling with double brake -autom. Stroke adjustment -motor. Slide height adjustment -hydr. Overload protection in the RAM -electron. Pressing force measurement -Oil lubrication -hydr. Tool clamping system more
3
Siemens 6SL3120-2TE21-0AA4 double motor modules, serial number according to the photo, used, low wear, 100% functional, included with com. photos 9ewcelzwx more
1
Number 01-99-27 Manufacturer Kamble Type 80-1.75 Machine data Year built: approx 1980 L x W x h: approx. 500 x 1200 x 1400 mm Weight: 200 kg Technical data Electric beading & edging machine Mqy2l Roller spacing min.: approx. 80 mm Maximum roller spacing: approx. 120 mm Maximum sheet thickness: approx. 1.75 mm Throat depth: 315 mm Power: approx. 2,0 kW incl. foot switch including roller - sets (18 Pack) Other accessories on request Price and other specification... more
6
Description: Complete system with dual Abwickelhasl, straightening machine and roll feed for Band 600 mm x 1-5 mm (make ALBA). Technical details / accessories / additional: Pressure 200 t Hub 12-40 mm Cppnbrbmi Stroke rate 20-200 stroke/min Table size 1400 x 1100 mm Tappet adjustment 0-100 mm Number of connecting 2 PCs Total power 25 kW Machine weight approx. 26 t Dimensions approx. 10 x 2 x 4 m Changes and error in the technical data and equipment reserved. more
6
double end profiling machine for the door and windows production working width 4000 mm 3 aggregates on each side 79sh8ptbc 1 x saw 2 x vertical miling aggregate - spindle stroke 800 mm! long side profiling machine with 16 spindles machine comes with a lot of spare parts! further technical data on demand Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as see... more
3
AS ON PHOTOS BEHIND C9axpvmra FOR MORE QUESTIONS PLEASE CONTACT ME. more
6
Material diameter of 2-10 mm diameter, working length 100-200 mm, power 3.7 kW, feed automatically, voltage 380 V, programming LCD screen, net 1500 kg, Machine dimensions 1780x1500x1820 LxTxB German Language User Cf9nf3ik more
2
Double grinding machine name + polishing machine stock-no. MA751 manufacturer SMP machine no built in 1955. 244 Weight approx 400kg Size W 1800 x H 1900 x D 850mm Gearbox Continuously adjustable strap length 2800mm Specifications: 380 volts, two separate drives accessories: suction, suction tubes (Alterations and errors in the technical data, specifications and prices subject to prior sale!) 8qosnvwo more
6
Description: Complete system with decoiler straightening machine and feeder for band 600 mm x 1-5 mm. 7ytdtukil Technical details / accessories / additional: Pressure 250 t Stroke 20-140 mm Number of strokes 60 stroke/min Table size 1250 x 820 mm Tappet adjustment 0-100 mm Number of connecting 2 PCs Total power 17 kW Machine weight approx. 16 t Dimensions approx. 10 x 2 x 4 m Changes and error in the technical data and equipment reserved. more
5
Dear customers currently we offer a disc sanding machine double sided for model an mold making of the brand Zimmermann. Here are some technical datas: Disc diameter: 900mm Table length: 1200 mm Table width: 400 mm Table tilling up and down: 25/30° Protractor: 60/60° Power: 4 KW Speed: 750 rpm Dimensions: L 170 cm x B 130 cm x H 150 cm Tcpvt8qk2 Weight: 780 kg We are looking forward to your questions and inquiries. more
6
Double-Corner Rounding Machine Hunkeler D-ES-P Year 1985 - Serial-No. 50723/18 -Available Immediately - Cxedmnvl -can be inspect- -on stock - can be test- more
6
Tandem axle trailer + train eye 40 mm + approx. 13 t + mechanical supporting legs + Perkins diesel generator 42.5 kVA + hopper 3.2 m³ + item width 3.1 m + inner drum diameter 1.5 m x length 3.7 m grate bars 80 x 170 mm Hsmoep7 External drum dia. 2 m x length 2.5 m with covering square mesh 25 mm + brush + 3 discharge conveyors + transport dimensions length 10.5 m x width 2.55 m x height 2.95 m more
6
Double End Tenoning Machine Sliding-Table Gabianii machine in stock -After reviewing the technical -very good condition TECHNICAL PARAMETERS: -maximum length 5000 mm -the maximum height of the elements of the 220 mm -the minimum length 500 mm -five spindles -one upper spindle flying -all the spindle fully adjustable 360 " -spindle motors 11 x 3.7 kW -width adjustment motor 4 kW Mvnyv -the engine feed 5 kW -adjustable feed speed on the geared motor -7-35 feed speed m/min -guide the upper mater... more
6
Description: Complete system with ARKU Abwickeln reel, Dualderop directional machine and ARKU Roll feed for band 600 mm x 1-5 mm. Technical details / accessories / additional: Pressure 250 t Stroke 20-190 mm Cppqa3zus Stroke rate 20-100 stroke/min Table size 1600 x 1000 mm Tappet adjustment 0-120 mm Number of connecting 2 PCs Total power 25 kW Machine weight approx. 20 t Dimensions approx. 10 x 2 x 4 m Changes and error in the technical data and equipment reserved. more
6
Dear customers currently we offer a disc sanding machine for wood and plastic machining of the brand Zimmermann. Here are some technical datas: Disc diameter: 600mm Table length: 800 mm Table width: 280 mm Table tilling up and down: 30/45° Protractor: 60/60° Power: 1,5 kW Speed: 1.000 rpm Dimensions: L 92 cm x B 100 cm x H 130 cm Mpmv7 Weight: 315 kg We are looking forward to your questions and inquiries. more
6
Description: Complete system with ARKU Abwickeln reel, GSW indicative machine and GSW Roll feed for band 600 mm x 1-5 mm. Technical details / accessories / additional: Pressure 160 t Hub 8-120 mm Number of strokes 60 stroke/min Table dimensions 1500 x 1300 mm Tappet adjustment 0-100 mm 30fzyeg Number of connecting 2 PCs Total power 25 kW Machine weight approx. 26 t Dimensions approx. 10 x 2 x 4 m Changes and error in the technical data and equipment reserved. more
3
Workpiece sizes: Length 180 - 3000 mm, width 100 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 900 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Workpiece middle support with rollers Each side has got 8 glue injectors and 8 dowel inserters (Type 24) Doweldiameter: 8 mm, dowellength 30-40 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with 2 dowel... more
6

Double printing machine SORBINI T/20 3 STP

Düsseldorf Germany
6383 km
2005
USED
Offer
Another 3 days
Dimensions (l x w x h) approx.: 6200 x 2500 x 1750 mm Weight approx.: 9500 kg Description: Automatic machine suitable to apply paint on flat surfaces GENERAL SPECIFICATIONS Industrial machine with heavy-duty structure It can work alone or as a part of a production line Max. working width 1700 mm SYSTEM AND OPTIONALS OF THE PANEL HANDLING Piece feeding through motorized bottom carpet Top pression of the working piece Adjusting in continuos feeding speed with regulation in automatic by numerical c... more
4
Pressing force: 60 to. Stroke rate: 60-300 H / min stepless Stroke adjustment: 30-80 mm. Tappet adjustment: 50 mm. Height: 350 mm. Table area: approx. 830 x 500 mm. 92becbosc Stand forward: approx 350 mm. Incl. feed line, stroke: 5 - 150 mm, width: 250 mm. Weight: approx. 8000 kg. The machine can be seen under power and presented, and is immediately available. Please also my other listings. more
6
Manufacturer: Koch, Type: Compact, Year: 1991, Control: Programm, Working widht max mm: 150-2500, Arbeitstiefe max mm: 200, Working thickness max mm: 80, Schwenkbereich Grad in X: +30-90, Dovel units: 3, Dovel diameter mm: 10-12, Drill gearings: 2, Drill gearings: 2, Drill gearings: 2, Drill spindles per support: 5, Gluing: yes, Dovel insertion: yes, Raster 32 mm: yes, Compressed air bar: 6, Wight approx. kg: 3000, Year :1991 Q8uywn80q more
3
x-travel 400 mm Table area 660x400 mm y-travel 600 mm column daylight 600 mm z-travel 450 mm spindle diameter mm bore spindle stroke 150 mm spindle turning speed range 68-2000 U/min distance between columns mm Bqvhgrrj Feed 0,02-0,2 mm/U workpiece height 530 mm total power requirement kW weight of the machine ca. 2 t dimensions of the machine ca. m more
6
spindle diameter 150 mm x-travel 1500 mm distance between columns 3000 mm quill stroke 280 mm travel -y axis 1450 mm travel -z axis 800 mm spindle turning speed - stepless 0 - 3000 U/min spindle taper ISO 50 table surface area 1750 x 1650 mm table load 5000 Kg distance spindle nose and table 1050 mm spindle drive 25 kW total power requirement 40 kW weight of the machine ca. 13 t dimensions of the machine ca. 5 x 4 x 3,5 m Qmd3rjzfe • HEIDENHAIN TNC 145 control more
6
max. wheel diameter 200 mm gear width 150 mm gearing angle 0 ° total power requirement 0,1 kW weight of the machine ca. 30 kg dimensions of the machine ca. 0,6 x 0,3 x 0,5 m centre distance 0 - 100 mm Xmrhs2vbx axe distance 25 - 100 mm max. workpiece weight with clamping 20 kg The device can be used for 2-flank testing of spur and helical gears with the parameters fi and Fi . On the device, you can of course also testing contact pattern. The device has one tailstock for clamping gears and ma... more
6
Dimensions (l x w x h) approx.: 0 x 0 x 0 mm Weight approx.: 0 kg Description: TAGLIABUE TAG TT 2.600 Double Volumen Sanding Machine - Sanding units: Two cross - cutting units - Arrangement: transverse, transverse double belt machine - Sanding width: 2600 mm Working width 2qo87m - Feed speed: 5 - 25 m / min. - Drive power: SEW SAF 70 5,5 HP, 6,6 - 39 1 / min. - Work piece thickness: 3 - 130 mm - Work plane height from the floor: 900 mm +/- 20 mm - Voltage: 400 V, 50 Hz, 3 P / IP54 - Co... more
4
"Double-sided disc sanding machine FROMMIA 836 SD Diameter disc mm: 600 Table tiltable °: 45 Table width mm: 300 Sooju93gy Table length mm: 950 Mitre stop up to °: 90 Main motor power kW: 2,2 Rotation speed adjustable: Yes Device for sanding of rounded pieces: Yes Integrated dust extraction: Yes Technical type: Stationary machine Processing: double-sided Sanding disks: Gluing disks CE-mark: Yes Declaration of CE-conformity: Yes Required space lxwxh: 1200x1100x1600 Weight kg: 410 Operating stat... more
6
• CNC-contouring-control by FIDIA C 20 FF (software version: V3R10.6) • new spindle in 2016 ( appr. 1,600 h) - turn on time total: appr. 48,547 h (November 2016) • CNC universal milling head T3D – index 1° - (C-axis +-200° / A-axis +- 100°) – feed 300°/sec. 3jj9fx0td • motor spindle 29 KW – up to 24,000 rpm. HSK-A 63 • brand-new motor spindle as spare part • 40-fold tool changer max. tooling diameter = 100/150 mm – max. tooling length = 300 mm - max. tooling weight = 15 kg • minimum quan... more
4
grinding height 70 mm grinding width 360 mm grinding wheel diameter 900 mm total power requirement 135 kW weight of the machine ca. 20 t Grinding wheels Ø900 x 75mm Grinding height, approx.2 - 70mm Grinding width (workpiece Ø), approx.30 - 360mm Max. adjustment of the workpiece guides30 - 480mm Quill feed, vertical, each150mm CNC infeed of grinding wheel0.0001mm Feed for workpiece transportation device, infinitely variable35 - 350mm/sec Feed of dressing tool12 - 50mm H9iwaocls Grinding... more
6
Wobble, Doppelnietautomat DUNKES Type DN 4 Siemenssteürung with Masch. P No 81-5458 Year 1982/2009 shank diameter max. 12 mm Tool diameter mm 16 mm 190 mm 60 mm Nietkopfhub each riveting Nietspindeldrehzahl 1400 rev / min. Installation height tool - counter tool max. 80 mm Air consumption 6 bar Power per riveting 1,1 kW Power supply 380 V, 50 Hz - turntable with servo drive, step size programmable Siemens PLC control - Doppelnieteinheit is adjustable in the machine frame to the rotary table - T... more
6
Tyre Packing Machine, Tyre Tripling Machine Height: 1060mm Width: 1930mm Depth: 630mm Weight: 115kg Connection: Air, up to 145 PSI Compaction force: up to 0.125 Ton Working height: 760-780mm Transport size: europallet Transport height: 1200mm Features • extreme solid and brass mounted packing slider with grease nipples 2kkok9zq • robust and long-life design • high performance cylinder • ball-bearing roller guides • adjustable work height • pneumatic quick connectors • extremely quiet due to s... more
6
workpiece thickness: 10 - 60 mm feed: max. 60 m/min hollow width: 220 - 3200 mm Dimensions (l x w x h) approx.: 40000 x 14000 x 2500 mm Weight approx.: 40000 kg Description: STEFANI Major/Flex Double-sided Edge Banding Machine consisting of: 1st. Machine, doubel sided, type MAJOR - Chipping unit equipped with: - horizontal chipper 3,5 kW - vertikal chipper top and bottom each 4 kW - chipper swiveable 4 kW - milling unit vertical 2 x 1,8 kW - milling unit vertical 2 x 1,8 kW - 12-ti... more
6
Double-sided Hydr. Centering machine Fabr. M in TEST TOVAGLIERI type M 25 Masch.# M256 built in 1977 Technical data: Tip height 125 mm Top width 1500 mm Chuck diameter 125 mm External dimensions 4700 x 1300 x 1600 the rear/front -front two cut / rear -Conveyors -sep. Hydraulic used more
6
max. wheel diameter 600 mm gear width 100 mm gearing angle 0 ° total power requirement 0,1 kW Sgm7jec weight of the machine ca. 100 kg dimensions of the machine ca. 1,2 x 0,4 x 0,4 m axe distance 0 - 400 mm some clamping parts motor with belt drive thermopaper printer GRAPHTEC digital probe TESA with display unit The quoted 2-flank tester MAAG DAS-2 from Switzerland is in very good condition. Suited with thermopaper printer can be indicated the parameters fi and Fi by rolling of mast... more
3
grinding height 95 mm grinding width 100 mm grinding wheel diameter 600 mm Sjmtvstuh total power requirement 30 kW weight of the machine ca. t dimensions of the machine ca. m more


double edg...
every day

New machines via email!

Be informed!

to

to

Change search
DOUBLE EDGING MACHINE
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close