Used Double Mitter Saw for sale (15,767)

Condition: used, Vesto saw with two discs for sale Gbsdetqt T Ijpfx Af Aer - electric motor: 2 x 7.5 kW, - complete with hydrostation, - electrical cabinet.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, cutting length (max.): 4 mm, saw blade diameter: 350 mm, rotational speed (max.): 3,000 rpm, overall weight: 600 kg, power: 4.4 kW (5.98 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle speed: approx. 3,000 rpm Cutting length: approx. 3–4 m Saw blade diameter: approx. 350 mm (300–400 mm) Saw angle: 90° and 45° MACHINE DETAILS Suitable materials: aluminum and PVC profiles Compressed air requirement: 6–8 bar Motor power per head: approx. 1.5–2.2 kW Gedpozqblasfx Af Asbr Connection voltage: 400 V Weight: approx. 500–600 kg EQUIPMENT Pneumatic horizontal clamping devices

Condition: used, Year of construction: 1991, cutting width 280 mm Cutting height 150 mm Motor output 2 x 4,0 kW saw blade 420 x 30 mm Cutting length 6000 mm speeds 2800 U/min air pressure 7 bar weight of the machine ca. 1750 kg dimensions of the machine ca. 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 Gbjdjzughbspfx Af Aor - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Gjdozryuvopfx Af Asbr Technical data: - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm

Condition: used, Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Gbjdpfx Aszryu Aof Asr Technical data: - Cutting length: approx. 2,200 mm - Mitre angle: 45° – 90° - Workpiece: max. 50 × 70 mm - Further details: See PDF

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Cutting height at 90° : 200 mm Gbjdpegixvwofx Af Aer Cutting with: 130 mm Power: 5,1 kW Weigth: 1260 kg

Condition: excellent (used), Catalog number: 8051 TECHNICAL DATA - max. blade diameter: 300mm - spindle diameter: 30mm - blade guards: 2 pcs - pneumatic cutting (blade movement: up/down) - sawing units adjustable at a 45° angle - manual adjustment of sawing unit spacing - min. cutting length at 90°: 280mm - max. cutting length at 90°: 3020mm - cutting height at 90 degrees: 90mm - pneumatic clamps: 2 pcs - control pedal Gjdpfxjzrwrfj Af Aebr - material support - main motor: 2 x 2kW - dust extraction nozzle diameter: 2 x 60mm - dimensions (L/W/H): 3520x900x1450mm - weight approx. 500kg ADVANTAGES – unpainted – tilting sawing units – DTR documentation Net price: 15900 PLN Net price: 3790 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations) – used saw, very good condition

Condition: like new (used), Year of construction: 2024, Wegoma double miter saw with 3-axis control Gsdpfezhx A Dsx Af Ajbr Double miter saw DS140 Working length 4000 mm, hydropneumatic saw feed Pneumatic swivel 45°/90°/45° 4 clamping cylinders, pneumatic 2 carbide-tipped saw blades 500 x 80 mm Left saw head fixed, right saw head movable Digital display Positioning control EPS 220 For double miter saws, including EPS220 control for precise length positioning. With industrial touch panel 15 inches (dust and splash-proof) Display for manual input of cutting data or via data set integration - Ethernet connection 10/100 (TCP/IP) - USB interface - Data transfer via USB or network possible. - Interface to measuring ruler incl. interface software. Incl. control cabinet, motor, and software licenses. - Short and long cut setting - Automatic cutting (can only be activated via software in conjunction with entry protection) Positioning electronics for stepless automatic swivel from 45° to 135° 4.00 92062530 Feed roller conveyor 3 meters for DS mounted on the mobile unit Machine immediately available Ex works

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication Gbsdpfezrmpyjx Af Asr - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation Godpfxezh Ip To Af Asbr – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: used, Year of construction: 1973, Max. cutting length 3200 mm (distance from 1st to 3rd saw blade) with left-side circular saw tiltable up to 45°. Cutting capacity 2200 x 2500 mm. 3 motors, each 4.5 kW. Both cross-cut saws tiltable from 45° to 90°, each with a scoring motor. All three saws up to 400 mm diameter. Minimum cutting width 210 mm. Both scoring saws pneumatically moved forward and back with vacuum suction cups for panel fixation. Storage location: Nattheim. Gbjdpfx Afovvkm Ij Ajr

Condition: used, Year of construction: 2024, Cutting length: 3700 mm Drive: 2 x 3.0 kW motor Gbedezhpbdepfx Af Ajr 2 saw blades, diameter 600 mm / Z = 138 New saw feed: hydropneumatically prepared for installation of an electronic control system Aggregate on the left is fixed, on the right is movable R700i database for max. 400 basic profiles, 1000 color profiles USB and network connection / remote maintenance Cutting angle: 20° - 90° - 135° Integrated memory TFT color touchscreen Aggregate adjustment: stepless motorized aggregate adjustment 20° - 135° including section clamp (1x per aggregate) Indication of swivel range: swivels outwards Clamping device: vertical clamping device with mounting plate for holding profile-related parts Feed from the right: movable roller conveyor, support length 2900 mm, width 250 mm Stops: socket Extraction Software stop for overlengths Stop for short parts, pneumatically extendable Label printer: RAPID-specific label printer RED-300, installed in the control panel R700 sealing clamping device Control cabinet, freestanding R700 waste conveyor Cutting length 3.7 m Inclined conveyor 1000 mm horizontal x 2500 mm vertical Storage location: customer

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Electronic control of the X-axis X-axis positioning speed (m/min) 25 Detection of the moving head position using a direct measurement system with an absolute magnetic strip Mechanical adjustment of intermediate angles; maximum external inclination 22°30' Oil-pneumatic blade feed Useful cutting length (mm) 4,000 Gbodpfx Afjzr E S Ts Aor Blade diameter (mm) 550 Blade motor power (kW) 2.2

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, Effective cutting length: 4000 mm Blade diameter: 500 mm Electronic tilting of the inner/outer saw heads Tilting range: 22.5° to 135° Gsdpfozrhuwox Af Ajbr

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Max. cutting section at 45° 40 x 100mm Gedpjdy Hqvjfx Af Ajbr 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase CE Safety requirements

Condition: used, Hüllhorst DH54S Machine number: 03974 Circular saw drive: a) 2 motors: 5 HP each b) Speed: 3000 rpm c) Circular saw diameter: 400 mm d) Circular saw blade thickness: 2.6 mm e) Circular saw bore: 35 mm Working range: a) Standard machine: 2200 mm cutting depth and 2200 mm cutting width b) Custom cutting depth: up to 2500 mm c) Custom cutting width: up to 3000 mm d) Minimum cutting width: 210 mm Gbedpfx Afexrzfve Ajr e) Maximum cutting height: 100 mm

Year of construction: 2026, condition: new, functionality: fully functional, Standard configuration: ▪   No. 2 carbide tungsten saw blades Ø 600 mm ▪   Integral safety casing for cutting area protection ▪   No. 4 vertical vices ▪   2 Retractable pneumatic intermediate supports ▪   Loading roller conveyor 400 (Useful length 2,2 m) on mobile head ▪   Minimum quantity lubrication (MQL) with pure oil ▪   Greasing gun ▪   Set up for the extraction of chips and fumes ▪   15' touch screen control panel (IP65) on linear guides ▪   PC operator interface ▪   Operating system Windows ® ▪   Real time numerical control ▪   FSTCUT4 software licence ▪   Software management of cutting in minimum and super-minimum mode for special lengths ▪   Software management of cutting in oversize mode for special lengths ▪   Software management of cutting in trimming mode for cut ends with variable angles ▪   Teleservice for the first 12 months Optional equipment installed on the machine: ▪ PR-29060 Profile lifting kit ▪ PR208207 Third intermediate pneumatic retractable support ▪ PR206695 Chip conveyor belt ▪ PR203359 Label printer ▪ PR203356 Licence for step-by-step cutting software, complete with 1 extra surface on fixed head, horizontal clamps on fixed and mobile head (no. 2), 90° cuts, two-hand control ▪ IV33160 Vacuum cleaner for extraction of chips and fumes Godpfsztr Rrsx Af Asbr

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 Gsdpfsg Db U Aox Af Asbr TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW Godow H R R Hjpfx Af Aebr – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Gbedpfxsq Ii Dle Af Ajr Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, TECHNICAL SPECIFICATIONS: – Length of feed rollers: 7800 mm – Roller width: 1430 mm – Roller diameter: 110 mm – Destacking system – Stacker width: 1540 mm – Package depth: 1430 mm – Package height: 1830 mm Godjymd I Dspfx Af Ajbr – Element collection with chains: 1600 mm x 1600 mm – Return of crossbars via belt conveyor: 3000 mm – Crossbar stacking up to 1370 mm at lifting height 1700 mm – Total length: 12 m

Condition: new, Year of construction: 2026, functionality: fully functional, cutting length (max.): 3,000 mm, saw blade diameter: 350 mm, air pressure: 6 bar, section length (min.): 50 mm, HECHT Double Mitre Saw Exenso DS350E - 3000 mm for wood, glass strips, mullions, profile strips, aluminum strips, etc. Item number 942.5103, 1 piece, HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inward) to 135° (outward) - Right head is adjustable - Saw blade mounting Ø 350 mm - Incl. 1 piece of center support. - Clamping of the units is pneumatic. - Positioning control Exenso DS3 with touch panel, 15" display in a dust-protected monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Input of cutting data manually - Processing of data from a cutting list (data set according to specifications) - Processing of measuring tape data (radio measuring gauge GMF) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Item number 942.5203, 1 x DS feed device, hydropneumatic Item number 723.0121, 2 x DS saw blade for wood Bevel/bevel/flat tooth - positive - Item number 942.5236, 2 x DS workpiece clamping, combined (4 x horizontal, 4 x vertical clamping elements) Combined workpiece clamping consisting of: Swivel clamp, pneumatic - for clamping the material from above. (Free access to the work table) Horizontal clamp, pneumatic - torsion-resistant clamping cylinder with pressure piece. The clamps can be selected individually via the saw's control system. The clamping sequence can also be set via the control system. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item number 942.5241, 1 set DS350 table support, grooved (standard groove), Special grooving according to customer drawing on request! - Documentation: 1 x German or in the respective national language - Item number 945.2007, Packaging DS350 (transport frame) - Item number 944.1023, GMF measuring gauge, 3000 mm complete set (1500 mm plus extension 1500 mm) Gbsdpfxjzr Uu Re Af Ajr incl. charger and receiver. A robust aluminum measuring rail with a measuring range of 3,000 mm is ideal for measuring glass strips. Function For use on doors and large window sashes, the GMF measuring gauge can be extended mechanically and safely up to a measuring length of 3,000 mm. Base length: 1,500 mm Extension: 1,500 mm, automatic detection and calculation.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting length (max.): 6,000 mm, total length: 7,500 mm, total width: 1,500 mm, total height: 2,000 mm, Technical data – Elumatec DG 244/2, year of manufacture 2008 Control unit model: E555 – touchscreen Technical advantages of the machine: - Saw blade diameter: 550 mm - Blade speed: 2800 rpm - Compressed air supply: 7 bar - Weight: 2300 kg The machine is fully operational and can be tested on site. Price includes loading. We can also assist with delivery to the specified address. The machine is located in Poland – 33350. Inspection possible by prior arrangement. Our company is situated 120 km from Kraków airport (KRK). Transport possible. Gbsdpfsyv E N Asx Af Asr Export price.

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm Godpfxsxztydj Af Asbr N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 Gbodpfxouiwqhs Af Aer N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550