Used Extruder Screw for sale (5,637)

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Fgedpfxjznkx De Ab Usi Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 06 00003 00112, screw diameter: 65 mm, TECHNICAL DETAILS Screw diameter: 65 mm Process length: total 40 L/D, divided into 24D + 16D Extruder drive according to datasheet: 45 kW MACHINE DETAILS Operating voltage: 3 × 400 V, 50 Hz AC control voltage: 230 V, 50 Hz Fgodpfxs Ah Ei Nj Ab Uoi DC control voltage: 24 V Rated current: 130 A Total power: 65 kW Maximum pre-fuse: 160 A Dosing speed: 102 rpm EQUIPMENT Single-screw extruder including the control system mounted on the frame and a die. Note: The machine is sold without a melt filter, water bath, and strand granulator.

Year of construction: 1998, operating hours: 24,600 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 06, SINGLE SCREW EXTRUDER ME75/4 x 25 D - used machine, checked and ready for operation - open frame construction (new powder coated) with spur gearing and directly flange motor Fedpfo Ah Tg Rex Ab Usgi - DC-drive 35 kW - screw speed max. 38 rpm - 1-part cylinder, smooth with water-cooled entryzone - 6 heating and cooling zones - 1 flangeheating zone - 4 die heating zones, without heater - die connection incl. heater band - electrical cabinet mounted on operation side * incl. short interruption device 0,5 sec. - temperature controller type KS40, with self-optimisation - operation panel swivelling - hopper 100L with 3-pos. svievel mechanism - incl. NEW screw for processing PVC-U granule * nitrided , polished

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Fodpezhnlusfx Ab Usgi

Year of construction: 2022, operating hours: 80 h, condition: new, functionality: fully functional, Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Air pressure: 6 Bar Steam injection: 2 - 6 bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 operating hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max. 10 bar Reservoir: 7.5 liters Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Cextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max. 10 bar Reservoir: 10 liters Fgodpfx Aez S Idkjb Usi Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam set Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 bar Maximum pressure: 10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Air pressure: 6 - 10 bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pcs. Tooltemp temperature control unit Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group ploughshare mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 liters Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip screw conveyor Type: ELV 70/80-R Hopper: 150 liters Output: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing system Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling capacity: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Year of construction: 2003, operating hours: 65,470 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: Titan 68R-APC/ 2 68F-60-40-1100-UT, Titan 68R-APC/2 68F-60-40-1100-UT with tungsten carbide cylinder and screw (designed for WPC-HDPE base) Very good feeding behavior and good processing. Screw modification for optimal use, including in the recycling sector. The system has been completely overhauled and is ready for use. Feeder optionally available. Fgedpfx Aszh Ednob Uoi SIHI vacuum pump. For throughputs up to 400 kg/h. For highly filled compounds, approximately 180 kg/h. 4-zone heating.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Fsdpfozti Tkex Ab Uegi Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: Matricola: 40EV.147, The EBC40 HT/42D 600rpm extruder was manufactured by Comac (year of manufacture 2012). The motor is an AC motor with a power of 60kW. The extruder is equipped with an Omron-made PLC. The cabinet is fitted with an air conditioner. A degassing system with a 2.2kW liquid ring vacuum pump is included; the extracted gases are allowed to settle in a dedicated container for easy cleaning. The extruder is equipped with a twin-screw extrusion head, including a pressure and temperature transducer (newly supplied). Below are the specifications of the proposed model: Screw diameter: 42 Screw speed: 600rpm Motor power: 60kW L/D ratio: 42 Fgsdpfxe Afnqcj Ab Uji Effective penetration ratio: 1.5

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 5,000 h, machine/vehicle number: 90201097-0010/2003, screw conveyor diameter: 44 mm, screw conveyor length: 2,420 mm, For sale is a twin-screw extruder from the renowned company Berstorff, manufactured in 2003, for the production and processing of demanding rubber and TPE compounds. Fsdjz Eqwrspfx Ab Uogi The system was operated in a pilot plant of a research institute and was used exclusively for research and development purposes. Unlike systems used in industrial production, the extruder was therefore not used in continuous production. Accordingly, the machine has only a few operating hours. The extruder is particularly suitable for research and development departments, compounders, and companies in the rubber and plastics industry that are looking for a high-performance system for trials, recipe development, material testing, and small-batch production. The detailed technical data and the available screw elements can be found in the attached documentation. The existing equipment allows for flexible configuration of the screw for different compounding tasks.

Year of construction: 1996, operating hours: 25,000 h, condition: good (used), functionality: fully functional, single-screw extruder, 90 Reifenhauser, complete with electrical panel and 200 kW motor. The machine is in excellent condition. Fgsdpfezbh Ahjx Ab Uji

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Fgedpey Ufk Rofx Ab Uei Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Fedpszxxifjfx Ab Ujgi Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Fodpfoi Dtbqox Ab Uogi Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Condition: good (used), Year of construction: 2008, screw conveyor diameter: 75 mm, Capacity: Screw conveyor, ø 75-36D; approx. 600 kg/h Drive: A.C. motor, 182.0 kW Fjde Abc Hkopfx Ab Usgi

Condition: like new (used), Year of construction: 2006, operating hours: 4,545 h, functionality: fully functional, screw diameter: 114 mm, overall weight: 7,500 kg, A KMD114-32 P in like-new condition is for sale. This extruder comes from a technical institute and is therefore from a single owner. The operating hours are original and can be verified. The screw and cylinder are in like-new condition. Fgedpfx Abozxhfij Uji The gearbox runs very smoothly. Includes adapter, hopper, and loading onto a truck. Technical specifications: - Year of manufacture: 2006 - Screw for profile: 684 2929 / 8880 - Internal screw temperature control, welded tips - Maximum screw speed = 17 min-1 - Maximum dosing speed = 260 min-1 - 5 cylinder zones, 15 tool zones + 4 lip heaters, melt temperature, melt pressure - C5 control system with puller control, language E/D An inspection in 84405 Dorfen is possible at any time. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, screw diameter: 62 mm, Details: co-rotating, degassing, vacuum pump, segmented screws and cylinder, opportunity for side feeder Fedpfx Aoxu Db Esb Uegi

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Fsdpov Uz Awefx Ab Uogi

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Fodpfjycuuysx Ab Uegi Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Fgsdpfjuhpiyex Ab Uoi Good overall condition, very clean machine

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. Fgjdpfxjz A R R He Ab Usi We have other compounding lines and accessories in stock and ready for delivery.

Year of construction: 2001, condition: good (used), Brand: Rollepaal B.V. Type: A-Rex 90-33 Type number: E309.0001 Screw: Single Screw diameter: 90 mm L/D ratio: 33 Serial number: 230/400 Year of manufacture: 2001 Fgsdpfjzx Da Aox Ab Uei

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Fgsdpezl A N Nofx Ab Uoi Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Fodsyc Sfpjpfx Ab Uogi Condition: used, functionally tested, as is, without warranty You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Fsdpsztu Dbsfx Ab Uogi Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Year of construction: 2005, condition: ready for operation (used), Screw diameter: 114mm, max. PVC throughput: 600 kg/h, max. screw speed: 20/min, number of heating zones for molds: 12, motor power: 76 kW, rated voltage: 3x 415V AC, rated current: 353A, rated power: 218kW, weight: 7.1t, operating hours: approx. 90,000h. Screws: Geometry designed for PVC profiles, water-cooled, cylinders: nitrided, air-cooled, equipped with a new PLC control system, vacuum pump, and power inverter for the main motor. An on-site inspection is possible. Fsdpfx Ajzh Nibsb Uegi