Used Micro Screw Feeder for sale (8,304)

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Dsdpfx Asuzn Nnjfnsun Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 • Throughput range: 5 – 50 kg/h • Integrated agitator / paddle system in the hopper (as shown in the photos) Dedpfx Afsyfm Speneun • Stainless steel hopper • Twin-screw design The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials.

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper Dodpfeyfm Epex Afnsun • Rectangular hopper with stainless steel liner • Driven by a 0.55 kW electric motor The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials.

Condition: good (used), functionality: fully functional, rotational speed (min.): 38 rpm, rotational speed (max.): 38 rpm, type of input current: three-phase, overall weight: 1,200 kg, total length: 5,000 mm, total width: 600 mm, Direct power transmission Total length: 4000mm Trough width: 500mm Material of the conveyor screw: steel Dujdpfsudk Sbex Afnen Drive motor: SEW-EURODRIVE Drive power 5.5kW Voltage: 400V Protection IP55 End bearings, Robust cast iron housing

Year of construction: 2018, condition: good (used), Hethon 71 Hopper and screw feed 2018, stainless, 100Kg hopper and outfeed screw, screw diameter 60mm, 3Ph, two in stock Dedpfow Dg Ipjx Afneun

Year of construction: 2016, condition: good (used), Hethon 51 Hopper and screw feed Dsdpjw Dg Ucjfx Afnjun 2016, stainless, 50Kg hopper and outfeed screw, screw diameter 40mm, 3Ph, four in stock

Year of construction: 2016, condition: good (used), Hethon 61 Hopper and screw feed 2016, stainless, 100Kg hopper and outfeed screw, screw diameter 60mm, 3Ph, two in stock Djdpjw Dhdfefx Afnsun

Condition: used, Auger diameter: 35 cm Length: 385 cm Discharge opening: 45 cm x 33 cm Infeed width: 217 cm Dusdpsxz R Raofx Afnon Infeed height: 175 cm

Year of construction: 2014, condition: as good as new (ex-display), PSS SM 700 + PSS G 250 A ID.NO. 2336 Pss SM-700 liter paddle mixer model year 2014 with associated Pss G 250 A screw conveyor from 2016. Complete package in very good condition. Mixer dimensions D 230 W 125 cm H 235 cm. Dedpfx Aeifpl Isfnsun Giraffe D 140 W 125 cm H 250 cm.

Condition: excellent (used), Year of construction: 2017, Böllhoff Uniquick Vario Screw Feeder UNIQUICK Feeder Type 360 Plastic sorting bowl, diameter 360 mm Quiet and surface-friendly conveying Optimal screw dimensioning depending on the material being conveyed (width and height) Integrated and controlled baffle High wear resistance Consistent conveying performance thanks to amplitude control In a sound-insulated housing on a frame Track width: 20 mm Connector head diameter up to 20 mm Connector length up to 55 mm Filling volume: 3 l SIM BB-10-C (ws) Belt Hopper Bucket, chute: stainless steel Belt: white with FDA approval Filling volume: 10 liters Max. filling weight: 35 kg Drive: AC gear motor 230V / 50Hz Bunker with innovative drive to ensure a controlled, quiet, and gentle feed of screws and fasteners. UNIQUICK Multi Modularly expandable 3-way diverter Distributes the tested screws to three stationary screwdriving devices Separation Adapted discharge rail Precise guidance at the head Modular design Few format-dependent parts Component reproducibility Sensor monitoring Maintenance-free Sound insulation Screw conveying in a plastic bowl Lined with sound-insulating material Airtight blow-in of screws Compressed air maintenance unit Compressed air connection: 6 bar Power supply: 230 V AC Year of manufacture: 2017 Dimensions: HxWxD 1050 x 650 x 650 mm Technical specifications Find more items - new and used - in our shop! Duedpfxswbr N Hj Afnen International shipping costs upon request!

Condition: ready for operation (used), Powder feeder, screw conveyor, screw blender, used machine Dodpfx Aew Tt S Esfneun Dimensions: 855 x 720 x 810 mm Container size: 600 x 500 x 800 mm Electrical data: 230/400 V; 0.43 kW; 50/60 Hz The screw conveyor has a double bearing design and is equipped with a cover that opens due to the material flow.

Condition: excellent (used), Mitutoyo Frame Micrometer (28662) 103-155 OM-475, measuring range 450 - 475 mm Duodsw Suwgopfx Afnjn

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Dedpfxoxf Up Uo Afnsun Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Feeding technology / feeding system / vibratory feeder / sorting unit / bowl feeder Vibratory bowl, sorting device / screw feeding with vibratory feeder for screwdriving applications Feeding system DEPRAG Type: 0622-P/0.75-1S No.: 1183884 Year: 2011 - 2012 The unit was used for feeding contact pins for electrical connectors. Product dimensions: Ø 4 mm, length 26 mm The pins are stocked in the material hopper; the conveyor belt transfers the pins as required into the bowl feeder. The bowl feeder, equipped with two sorting tracks, delivers the pins to the product turner. The product turner orients the product to the desired position and releases it for further processing. The unit comes from a prototype system. External electrical control is not included and should be provided by a PLC. Without modification, also suitable for automatic and correctly oriented feeding of threaded studs up to M4 x 26. The unit consists of the following components: 1 pc. belt hopper / feeding conveyor DEPRAG Type: B 10 Serial no.: 1178200 Order no: 415050A Year: 2011 Duedpfx Aoh Ap Idofnsn Filling volume: 10 liters Belt speed: 100 mm/min Operating voltage: 24 Volt (DC) - Belt surface: profiled - Foldable stainless steel chute Weight: 11 kg 1 pc. bowl feeder vibratory bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm - Bowl feeder with two sorting tracks and two product outlets Operating voltage: 230 Volt, 50 Hz. 1 pc. DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Production no.: 35 pcs. FESTO product turner with 180° swivel range - 1 FESTO valve terminal CPV10-GE-MP-8 - 1 FESTO valve terminal CPV10-VI - Special pneumatic components (compressed air supply approx. 6 bar) - 2 pcs. MURR base modules type MVP12 - Complete unit mounted on a steel plate with 4 support feet Dimensions L x W x H: 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Duodpfxekpwuus Afnjn Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: like new (used), Year of construction: 2020, operating hours: 100 h, functionality: fully functional, Software type: UCCsuite 5.3.3. Renishaw PH20 measuring head (swivel-mounted) Duodpfex I I Npjx Afnon Measuring range X = 600 mm Measuring range Y = 800 mm Measuring range Z = 500 mm Repeatability 2 µm Table height 850 mm Power consumption 1.5 kVA Air consumption >= 0.6 MPa Dimensions L x W x H = 1380 x 1620 x 2700 mm Max. workpiece weight 500 kg Machine weight 1450 kg With computer and monitor. Made in Italy. Very good condition, hardly used.

Condition: ready for operation (used), Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages. Djdpstz Dkaefx Afneun

Condition: not inspected (used), MICRO-MOTION flow transmitter og MICRO-MOTION mass flow sensor Flow transmitter - Model - 3700A1A03BZEZNZ Volt - 85.250 VAC. 3700 S/N - 2183431 Sensor S/N - 518040. Mass flow sensor - Model - F050SR131SZ S/N - 518040. Flow cal. - 33.6384.77. Dens cal. - 07339081654.36. D1 - 0.00121 / K1 - 7338.88. D2 - 0.99677 / K2 - 8164.88. TC - 4.36. Temp. range - -240 to +150 DEG C. Tube - 100Bar. Connection - 40bar. Case - 0Bar. 3 pcs. in stock. Dusdeh R Iviepfx Afnon Price is per piece.

Condition: used, The Wahli-Stream Feeder TM 530 is a reliable feeder designed for efficient paper handling. Manufactured by Wahli, this model is located in Germany, with pricing available upon request. The machine supports an A2 format and is designed to enhance productivity in printing and finishing operations. Format: 360 420 mm Dusdpjvphzpjfx Afnon Equipment: AUTOMATIC ENVELOPE FEEDER (with vacuum suction) SUITABLE FOR PRESSES WITH STREAM / SINGLE SHEET FEEDERS ADJUSTABLE VACUUM, HEIGHT & SPEEDDELIVERY CONVEYOR MIN ENVELOPE SIZE: 7.6 x 12.7 CM MAX ENVELOPE SIZE: 36 x 42 CM

Year of construction: 2005, condition: excellent (used), diameter: 1700mm Duedpfx Asfd E R Aofnsn Stainless steel

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 110 bar -Liter output: 0.25 l/min -Motor: 24 V 22 W. -Hydraulic tank -Dimensions: 195/280/H160 mm -Weight: 17 kg Djdsd N D A Uopfx Afneun

Condition: used, Amplifier unit, amplifier -Type: DT110-U15-A-C2 -Series: multiNCDT Dusdedkqhdopfx Afnon -Dimensions: 65/170/H40 mm -Weight: 0.38 kg

Condition: used, Year of construction: 2013, functionality: fully functional, Cutting range for steel: 1–38 mm Cutting range - x: 3000 mm Cutting range - y: 1500 mm Cutting medium: HiFocus 161i CNC control: MicroStep Total power requirement: 6 kA Approx. machine weight: 3,500 kg Dsdox Sqy Sspfx Afnsun Description: MicroStep CNC guiding machine MasterCut Eco A Plus 3001.15 (3000 x 1500 mm) MicroStep® CNC control unit iMSNC with integrated network card - LCD operator panel mounted on the gantry - Laser pointer with automatic offset transfer - iMSNC control parameter database / Windows® - "AsperWin-Basic" programming system for direct programming at the machine control - "AsperWin Select" macro library module - "AsperWin NC-Sim" NC simulator module - "Plasma Marking" module (for center-punching) via plasma source - "THC" module / automatic height control via arc voltage - CNC oxy-fuel cutting table with sectional extraction / 3000 x 1500 mm - USB 2.0 interface for external storage devices - MicroStep® "iFDS Win" remote diagnostics module, remote maintenance access via TeamViewer - HiFocus 161i plasma source from KJELLBERG with automatic gas console and ContourCut Speed technology - Plasma torch connection (PBA) for HiFocus 161i, automatic gas console for HiFocus 161i / FlowControl - Module for controlling the automatic gas console HiFocus 161i - Marking module for HiFocus 161i - CNC interface for HiFocus 161i / integration with CNC control - Module for automatic current control for HiFocus 161i - Kemper extraction unit type 810800080 - Remote control of a Kemper filter system, incl. software activation Oxy-fuel: - 1 x oxy-fuel support Eco - Central gas control via proportional valves and parameter database for 1 torch - Power supply cables and gas hoses for heating oxygen, cutting oxygen, and acetylene - RHÖNA-FIT+ acetylene machine cutting torch (optionally also propane) - 1 tool set for oxy-fuel - 1 capacitive height control IHT (intelligent height control) for oxy-fuel technology - 1 electric ignition unit for RHÖNA acetylene - 1 x active collision protection - Standalone MMI control console - 1 x quick-change head for the PerCut 211 plasma torch - Initial set of consumables for Kjellberg® plasma source HiFocus 161i KAESER compressed air screw compressor Aircenter 8 and accessories for the central air supply of the complete MicroStep CNC plasma cutting system: - Aircenter 8 - ECO DRAIN - Condensate treatment system type: Aquamat CF 3

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Dsdpfoyb Sdiox Afnjun Made in Germany Good working condition

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, sheet thickness (max.): 38 mm, overall weight: 3,500 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Dusdpfx Afex I Ehpensn Cutting range for steel: 1–38 mm X-axis travel: 3,000 mm Y-axis travel: 1,500 mm MACHINE DETAILS Cutting medium: HiFocus 161i Control system: MicroStep Total power requirement: 6 kA Machine weight: approx. 3,500 kg EQUIPMENT Kjellberg plasma power source HiFocus Plus 161i