Used Micro Screw Feeder for sale (8,475)

Condition: excellent (used), Year of construction: 2011, 16768 MANUFACTURER: KAESER MODEL: SK25 Serial No.: 1015 Year: 2011 Power (kW): 15 Output (m3/min): 2.25 Pressure (bar): 11 Operating hours (DOC/TOTAL): 19238/36933 Frequency inverter: no Lrodpfoy Sitdox Akqsu Built-in dryer: no Heat exchanger: no Cooling (air/water): air Mounted on tank: no Documents: no Connection: 3/4

Condition: used, Year of construction: 2014, operating hours: 14,938 h, functionality: fully functional, power: 11 kW (14.96 HP), volume flow: 104.4 m³/h, pressure (max.): 8 bar, type of cooling: air, Screw compressor Boge C15F Inverter integrated Lrodpoztrt Tefx Akqju 11 kW 8 bar 1.74 m3/min Year of manufacture: 2014 Operating hours: 14,938

Condition: excellent (used), Year of construction: 2009, 3D coordinate measuring machine Ljdpfx Ajzvhrdokqeru Measuring range X/Y/Z: 440 x 500 x 410 mm Measuring uncertainty X/Y/Z: 2.5 + 3.9L/1000 µm Maximum table load: 227 kg Total weight: 293 kg

Condition: used, Year of construction: 1997, overall weight: 2,480 kg, power: 75 kW (101.97 HP), CompAir screw compressor Ljdpou Rn Hrsfx Akqjru Model: Champion 135 Year of manufacture: 1997 Intake pressure: 1 bar Stage pressures: 1.8 / 7 bar Volume flow: 12.8 m³/min Engine power: 75 kW The compressor is in working order and was regularly serviced and checked until it was decommissioned.

Condition: excellent (used), Here we offer the BYK Gardner micro-TRI device for measuring surface gloss. Ledpevn Emgjfx Akqsru Technical data: Gloss: Measuring areas: for high gloss 20° 10 x 10 mm, medium gloss 60° 9 x 15 mm, matt gloss 85° 5 x 38 mm. Measurement time: 0.5 seconds Measuring range: 20° 0 - 2000 GE / 60° 0 - 1000 GE / 85° 0 - 160 GE Repeatability: 0 - 99.9 GE 0.2 GE / 100 - 2000 GE 0.5% Comparability: 0 - 99.9 GE 0.5 GE / 100 - 2000 GE 0.5% Layer thickness: Substrate: Fe magnetic and NFe non-magnetic Measuring range: 0 - 500 µm (0 - 20 mil) Repeatability ± 2% / basic tolerance ± 1.5 (± 0.06 mil)

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 Lodoiyx Uzjpfx Akqeru 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: excellent (used), machine/vehicle number: 91-1101, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Ledednr E Aopfx Akqjru

Year of construction: 2021, condition: as good as new (ex-display), Automatic Double Screw Unit SE5 S With automatic screw feeding Head only bench mount Lsdjuxyyjpfx Akqeru Automatic working operations Depth stop control,...

Condition: used, Manufacturer: REWA Type: Solid body auger, with bearings on both sides, Lrodpfx Akerk Etusqju Other: without cover, WITHOUT motor and gearbox, with solids pusher Length: 8.00 m Ø screw: 300 mm

Condition: used, Machine Screw conveyor, Screw conveyor, Solid screw conveyor Manufacturer ASKANIA Type: TSF 315 Length: 3,80 m Ø screw: 300 mm Year of construction: 1996 Speed: motor 1400 1/min / gearbox 53 1/min Motor power consumption: 2.2 kW Gear oil: 1.8 l Material: Housing > galvanized steel / worm > mild steel / Cover: Stainless steel, half cover Lrodpfx Aorn Slgekqeu

Condition: used, Machine: Screw conveyor, hollow screw Ljdporn T R Iefx Akqsru Length: 6.30 m Ø auger: inner auger 170 mm, outer auger 460 mm

Condition: excellent (used), Press for gluing wood with a feeder STETON PLA 2500x1300 - Italian production - CE and DTR - year of production 1998 TECHNICAL PARAMETERS: shelf dimensions 2500 x 1300 mm six hydraulic cylinders with a diameter of 85 mm automatic glue applicator with pneumatic feed a four-section feeding table with the possibility of setting each section individually the ability to set the number of elements fed for each section element dimension min. 300x30x25 (LxWxT) mm element dimension max. 2500x160x40 (LxWxT) mm shelf pressure 260 bar max pressure of side pressure 120 bar bumper max pressure 200 bar total power 11 kW temperature max 120 " roller feed speed from 5-60 m / min Ljdpjh Tm A Ejfx Akqsru feeder speed 0 -40 m / min adjustable speeds on the inverter roller receiving table 1400 x 2500 mm seven side hydraulic cylinders 1800 mm feeding conveyor electric heating of shelves cross feeding table 2500 x 1400 mm total length 588 cm total width 497 cm Transport dimensions 1000x 230x 220 cm weight 11 t

Condition: excellent (used), Year of construction: 2017, 4 screw conveyors for sale (price for 1 psc) 2 psc. 5.8 m lenght (1psc without connection; 1 psc (cut in half) need to weld). 2 psc. 7.3 m length Both conveyors are with original connection (1 conveyors made from 2 parts) Engine parameters in the photo If you have an questions on this, please do not hesitate to contact us. If you interesting for all of them we can do very good discount. Lodpfx Akoibwfzjqsru

Year of construction: 2006, condition: excellent (used), machine/vehicle number: 1107, P/N: 190.101 Lrodpfjihvl Iex Akqsu Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: excellent (used), machine/vehicle number: 783, P/N: 190.101 Lsdpfeiiv Dnjx Akqoru Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: like new (used), Parts shown by hand not come. Lrsdpfxegvl Dne Akqsu

Condition: excellent (used), P/N: 190.101 // Fabrik No.: 616 Lrodognlb Aopfx Akqju Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. Lrjdpfx Aked Sg Hcsqju More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Condition: used, Year of construction: 2009, Speed / U/min. intake pressure / bar weight / kg total power requirement / kW Complete compressed air system - screw compressor + refrigeration dryer (Drypoint RA 500) + 2x compressed air boilers (3,000 litres each) Make: COMPAIR Motor power: 75 kW Type: LL80 7.5A Year of manufacture: 2009 Serial no.: CD1000057200 Lsdpeud Iwzjfx Akqsru Control system: Delcos 3100 Refrigeration dryer: Drypoint RA 500 Compressed air tank: 2x galvanised tanks, 3,000 l each - total volume 6,000 l Load hours: 79,495 This compressed air system from COMPAIR offers a powerful and efficient solution for industrial applications with high air requirements. LL80 7.5A screw compressor: The compressor with a motor output of 75 kW is robust, low-maintenance and designed for continuous use. Its modern technology ensures a stable and consistent compressed air supply even under high loads. Ideal for production facilities, workshops or other industrial areas. Delcos 3100 control unit: This intelligent control unit makes it easy to operate, monitor and adjust the compressor. It ensures optimum operation, energy efficiency and protection of the system against damage. Drypoint RA 500 refrigeration dryer: An integrated refrigeration dryer is essential for removing moisture from the air. This protects downstream machines and tools from corrosion and extends the service life of the entire system. Compressed air tank - 2x galvanised tanks with a volume of 3,000 l each: The two robust, galvanised tanks offer a large storage capacity of 6,000 litres in total. This keeps the pressure stable and maximises performance.

Condition: excellent (used), Year of construction: 2012, operating hours: 11,118 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 972.6 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Equipment: type plate available, Premium used Atlas Copco GA90 Lsdpfet E I D Eex Akqeru 90 kW 7.5 bar 16.21 m3/min Only 11,118 operating hours!

Condition: new, The Press block feeder is a reliable machine suitable for unloading composite pallet blocks for the production of pallet legs. The PBF can simultaneously unload from two pallets of composite pallet blocks to one or two conveyors. Like the other gantry robots, the PBF is user-friendly and has the same type of interface as the rest of Mychrome’s equipment. The grip sheet is automatically removed and placed in a waste container. Machine specification: Standard performance Operators: 0 Length: 5 m Width: 2,5 m Height: 3 m Lrodjwduuwopfx Akqeu Power: 10 kW, 3x400 V+N Pneumatic system: 7 bar compressed dried air: 100 L/min Should be filled and controlled: Container for lubricating oil Machine capacity: 36 blocks per minute (one type of blocks) Standard equipment: - 1 gantry robot with operator panel - 1 vacuum gripper

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 5,000 h, machine/vehicle number: 90201097-0010/2003, screw conveyor diameter: 44 mm, screw conveyor length: 2,420 mm, For sale is a twin-screw extruder from the renowned company Berstorff, manufactured in 2003, for the production and processing of demanding rubber and TPE compounds. The system was operated in a pilot plant of a research institute and was used exclusively for research and development purposes. Unlike systems used in industrial production, the extruder was therefore not used in continuous production. Accordingly, the machine has only a few operating hours. Ljdpfxsz Eqwrs Akqsru The extruder is particularly suitable for research and development departments, compounders, and companies in the rubber and plastics industry that are looking for a high-performance system for trials, recipe development, material testing, and small-batch production. The detailed technical data and the available screw elements can be found in the attached documentation. The existing equipment allows for flexible configuration of the screw for different compounding tasks.

Condition: ready for operation (used), Year of construction: 2000, SAMSYS MUS 2000 / Bar Feeder Magazine -CE marking -Year of manufacture 2000 -Country of origin: Switzerland -Bar diameter: 5 - 80 mm -Bar length: 250 - 1550 mm -Longitudinal movement: 600 mm -Height adjustment: 775 - 1175 mm Dimensions: L x W x H 2.2 x 1.1 x 1.7 meters / Weight 500 kg Subject to errors and omissions. Lsdpfx Aksz Eqwxjqsru

Condition: used, machine/vehicle number: 220.00452, power: 7.5 kW (10.20 HP), Used, functional ALUP compressor stage Air End Tri AG 51-S The stage is used and in working order. Lredpfxsz Er Edo Akqeu Art. No.: 220.00452 Motor: 7.5 kW 3970 rpm 16.5 A The price is €350 plus VAT. Freight shipping is available for an additional charge.

Condition: excellent (used), Year of construction: 2016, S016860 PROD. ATLASCOPCO Lrjdpfxez Dgbqo Akqeu TYPE GA160 S/N APF208686 YEAR 2016 POWER (kW) 164 CAPACITY (m3/min) 21 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 3 NEW/USED USED