Used Extrusion for sale (348)

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Ndjdpfx Akezxxifsqsc Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Year of construction: 2005, condition: ready for operation (used), Screw diameter: 114mm, max. PVC throughput: 600 kg/h, max. screw speed: 20/min, number of heating zones for molds: 12, motor power: 76 kW, rated voltage: 3x 415V AC, rated current: 353A, rated power: 218kW, weight: 7.1t, operating hours: approx. 90,000h. Screws: Geometry designed for PVC profiles, water-cooled, cylinders: nitrided, air-cooled, equipped with a new PLC control system, vacuum pump, and power inverter for the main motor. An on-site inspection is possible. Ndedpfx Akjzh Niboqjc

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Throughput (depending on material, bulk density, and recipe): 200 - 300 kg/h Extruder type: Single-screw extruder / melt extruder Screw diameter: 145 mm Ndedpfxszr Hz As Akqoc Heating: Induction heating Heating processing temperature: over 300°C possible MACHINE DETAILS Drive Drive power: 45 kW Voltage: 380 V Frequency: 50 Hz Rated current: 84.2 A Speed: 1,480 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – continuous operation Sound level: 71 dB(A) Year of drive manufacture: 2022 Star/delta connection possible Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Operating hours: 10 h EQUIPMENT Metering device Hopper for material feed Large filter / screen changer Adapted die

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. Production line units: 1. Zhejiang Baina 150 20D 1000Kg/h cold feed vacuum extruder (Standard) 2. Zhejiang Baina EJ-PPF-150-04-00 conical die (Pneumatic) 3. Zhejiang Baina 6m infrared curing oven (width 1000mm) 4. Zhejiang Baina 6m hot air curing oven (width 1140mm) 5. Zhejiang Baina 6m hot air curing oven (width 1440mm) 6. Zhejiang Baina 6m hot air curing oven (width 1600mm) 7. Zhejiang Baina 6m hot air curing oven (width 1800mm) 8. Zhejiang Baina 6m hot air curing oven (width 2000mm) 9. Zhejiang Baina 6m hot air curing oven (width 2300mm) 10. Zhejiang Baina 6m hot air curing oven (width 2500mm) 11. Zhejiang Baina 6m hot air curing oven (width 2800mm) 12. Zhejiang Baina 36M FF-SLX-02-00 (3 layers * 12m) cooling system 13. PCM automatic longitudinal and transverse industrial cutting machine 2000mm 14. AC-15AD liquid chiller with 285 liters water tank Nsdsy Exrpspfx Akqodc If you are interested, we will send you a detailed description and data.

Condition: used, functionality: unexamined, Used BARMAG / EMS-Inventa AG extrusion and spinning-related industrial equipment available in Thailand. The equipment is currently installed at an existing industrial facility in Thailand. Ndsdpfx Aoz Hzuqskqjc The available equipment includes BARMAG and EMS-Inventa AG machinery together with various auxiliary and process equipment, including: - Extrusion-related machinery - Spinning-related production equipment - Process vessels and tanks - Feeding / dosing equipment - Pumps and auxiliary equipment - Motors and gearboxes - Heating and cooling systems - Electrical control cabinets - Process piping and auxiliary systems The equipment is offered as used machinery. The exact models, manufacturing years, technical specifications, completeness and current operating condition are subject to verification. The equipment may be available as a complete production line, individual machines or selected components, depending on the buyer's requirements. Additional photographs, nameplate information and technical details can be provided to interested buyers. The equipment is located in Thailand and can be inspected by appointment. Dismantling and transportation are to be arranged with the buyer.

Condition: used, Year of construction: 1988, operating hours: 12,345,678 h, functionality: fully functional, machine/vehicle number: 228072, clamping force: 1,600 kN, operating pressure: 200 bar, Equipment: lighting, The machine is in good, used condition, runs smoothly and precisely, and was refurbished in 2019. It has a new pump, screen control, and light grid. Due to its age, minor repairs may be necessary. Closing pressure is 160 tons. The heating plate size is 450x500 mm and is electrically heated. The injection volume is 1.3 liters. The opening stroke is 560 mm, and the core puller is hydraulically operated at the top and mechanically operated at the bottom. The machine is available immediately. Ndjdpfx Aksz N Sxmjqsc Visible items in the foreground and background are not included in the auction.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: DS 013.0091, RAW MATERIAL TOWER PME YOC 2017 TWIN SCREW EXTRUDER WEBER Type : DS 1327 YOC 2017 DIE NORDSON YOC 2017 CALANDER OMIPA Serial 09.38A24 YOC 2017 ROLL PLANA OMIPA Serial 09.38A24 YOC 2017 THICKNESS & DENSITY MEASUREMENT SEREL Serial 4031 YOC 2019 AIR BLOWERS & COOLING CHAPEL OMIPA Serial 22.10A88 YOC 2017 PULL ROLERS AND EDGERS OMIPA Serial 11.35A19 YOC 2017 2 BREAKERS TRIA YOC 2017 GUILLOTINE OMIPA Serial 16.30A19 TRANSPORTATION BELT OMIPA Serial 17.02A49 YOC 2017 10x TRANSPORTATION BELT BIELE WEIGHING BELT BIELE STACKER / ROBOT FANUC Serial E16Y3413 Type A05B-2612-B081 YOC 2016 Load 140 kg Nodpfx Asz Dt Spekqodc 2 SIDE SANDER COSTA Serial LB643001A Type KK9CCCC2200 YOC 2017 PORTAL STACKER BIELE Serial A6213-24 YOC 2017 LASERPRINTER MASCA ID TECHNICAL DETAILS Width : 2000 mm Extruder output : 1250 kg / hr ( possibly 1400 kg / hr ) Raw material PVC Raw material supply is a mixture of powders, ground recycled, micronised recycled Output is PVC plates size 2000 x 1390 x 3,75 mm Elecricity consumption : 41 000 KWH for 5 days production incl startup and stop of the line incl sander and extraction

Condition: used, Year of construction: 1982, operating hours: 1,234,567 h, machine/vehicle number: 223577, clamping force: 800 kN, operating pressure: 200 bar, Used rubber injection molding machine, 80 tons. Werner & Pfleiderer, original control system. Machine runs well, but the hydraulics have an oil leak and should be repaired. Heating plate size: 300x400 mm, electrically heated. Core puller on top and bottom, hydraulically operated. Opening stroke: 360 mm. Injection volume: approx. 400 g. Cylinder temperature control units are not included. Ndsdpfxsz N Sykj Akqsc Other visible items in front of and behind the machine are not part of the auction. Removal must be arranged by the buyer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system is available immediately! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible print cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90% RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90% RH, non-condensing Installation: Away from direct sunlight Power supply: 100–240 V AC Mains frequency: 50–60 Hz Power consumption: 350 W Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Operating weight: approx. 17 kg EQUIPMENT Dual-extrusion print head Automatic nozzle lift system Interchangeable print cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen HD camera Heated glass plate PEI print bed Spool holder with material guide Ndjdoz Tf D Depfx Akqoc Power cord Ethernet cable USB stick Operating manual CE marking Print Core AA 0.4 – 2 pieces Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: used, Year of construction: 1971, operating hours: 12,345,678 h, functionality: fully functional, machine/vehicle number: M4514, Slitting shear with adjustable table for rubber sheets. The desired cutting size can be variably adjusted, and the table feed is automatic. The shear operates smoothly. Ndsdpez Rm R Tofx Akqec

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: E2018, total length: 7,000 mm, total width: 3,500 mm, total height: 6,000 mm, Very well-maintained machine in good working condition. Capacity up to 100 kg/h. Screw diameter 60 mm. Head diameter 160 mm. Nsdpfx Aezgc Ihekqsdc New, additional set of screws and cylinder included.

Condition: used, Year of construction: 2020, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes Njdpfx Akezw D Hasqodc 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Year of construction: 1990, condition: ready for operation (used), LIQUIDATION SALE – IMMEDIATE AVAILABILITY Due to the closure of the production facility, we are offering for sale a HÄNDLE mixer and extrusion press, used in a ceramic production line. Nodpfx Aksz Sbw Seqodc Price for the mixer and press: EUR 120,000 net, EXW, negotiable. Reasonable offers will be considered. Preference will be given to buyers who can complete the transaction and collect the equipment quickly. Equipment offered: HÄNDLE MDVG 920 B mixer, manufactured in 1990, weight 6,000 kg, power 30 kW HÄNDLE PZG 56 A/50 extrusion press, manufactured in 1990, weight 7,200 kg, power 90 kW, serial no. PZ 3098 Included: control cabinet two press heads with outlets: 24 × 39 and 32 × 45 The machines were fully operational until the plant shut down in December 2025. Wear parts (press screws, mixer paddles) were replaced in March 2025 and are in good condition. The equipment is characterized by robust construction, durability, and straightforward maintenance. It is available for inspection at the plant in Panoszów, Poland. The machines are available immediately. Quick completion of the transaction and prompt collection are preferred. Additional technical information and photographs are available upon request.

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for rigid PVC Suitable for HFFR formulations Suitable for elastomer compounds for low-, medium-, and high-voltage cables Ndsdpfxez Ngaxj Akqjc TECHNICAL DETAILS Screw diameter: 200 mm Length from feed inlet to end: approx. 1,100 mm L/D ratio: approx. 5.5 : 1 MACHINE DETAILS Drive power: 72.5 kW Overall machine length: approx. 2,500 mm Feed inlet height: approx. 1,000 mm EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing applications

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm Nedpfx Aoya Eldokqodc CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: used, Year of construction: 2021, functionality: fully functional, Sale of complete PVC profile extrusion lines We offer for sale 6 complete technological lines for the production of PVC profiles, originating from an operational production facility. The equipment dates from 2011–2025, with some units having undergone major overhauls. The technological lines include: • twin-screw conical extruder Pol-Service Majcher PSMD 65 / PSMD 65/132, • main motor power: 37 kW, • output: approximately 120 kg/h, • calibration table with 2 vacuum tanks (Pol-Service Majcher, Polreplast or Greiner – depending on the line), • caterpillar haul-off with guillotine (Greiner or Gruber Extrusion), • stacking device, • vibrating station for unloading Big-Bags. Key information • 6 complete technological lines, • main motor power: 37 kW, • output: approximately 120 kg/h, • equipment from reputable manufacturers: Pol-Service Majcher, Greiner, Polreplast, Rawotechnik and Gruber Extrusion, • selected equipment after major overhauls, • available technical documentation and CE documentation for selected machines. Purchase options: • single technological line, • several selected lines, • complete machine park, • the entire facility with all production equipment. The price quoted is for one line. A detailed list of equipment, technical parameters, technical documentation and additional photos are available upon request. Location: Lower Silesian Voivodeship, Poland. Ndodpfxozlpabj Akqsc

Year of construction: 2025, condition: like new (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Ndodpsz Eg S Ejfx Akqjc Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 871, Completely refurbished film extruder. Capacity: approximately 50-60 kg/h. Nsdsz Hvipopfx Akqsdc Cylinder diameter: 40. Installed die head diameter: 100. Printing machine, refurbished and unused. Additionally, two complete die heads are included: Diameter: 75. Diameter: 120.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 5,000 h, machine/vehicle number: 90201097-0010/2003, screw conveyor diameter: 44 mm, screw conveyor length: 2,420 mm, For sale is a twin-screw extruder from the renowned company Berstorff, manufactured in 2003, for the production and processing of demanding rubber and TPE compounds. Ndodpfxjz Eqwrs Akqsc The system was operated in a pilot plant of a research institute and was used exclusively for research and development purposes. Unlike systems used in industrial production, the extruder was therefore not used in continuous production. Accordingly, the machine has only a few operating hours. The extruder is particularly suitable for research and development departments, compounders, and companies in the rubber and plastics industry that are looking for a high-performance system for trials, recipe development, material testing, and small-batch production. The detailed technical data and the available screw elements can be found in the attached documentation. The existing equipment allows for flexible configuration of the screw for different compounding tasks.

Year of construction: 2006, condition: used, functionality: fully functional, Complete Extrusion Line for Plastic Pipes Luigi Bandera / Graewe / Supertech Year of manufacture: 2006 For sale: Complete extrusion line for the production of plastic pipes. Installed in a mobile container setup = 3 x 40-foot sea container. (Walking Pipe system). Ideal for mobile production or limited space. Specifications: Extruder: Luigi Bandera S.p.A. Year of manufacture: 2006 Serial number: 251371 / 251372 Downstream processing / cooling line: Supertech Industrie – Walking Pipe system Saw / cut-off unit: Graewe GmbH Type: RA 250/4 Year of manufacture: 1999 Control system: Krauss Maffei Installation: fully integrated in container (plug & play concept) Description: This robust extrusion line is suitable for the production of plastic pipes (PE/PP/PVC depending on configuration). The line consists of a powerful Bandera extruder, followed by a complete calibration, cooling and transport section (Walking Pipe), and a Graewe cut-off saw. Applications: Drainage pipes Ndjdozbkkhspfx Akqec Cable protection pipes Industrial pipelines Irrigation systems 💬 Price on request 📍 Viewing possible by appointment; address = 7822 Ath, Belgium Keywords: Technical / industrial Extrusion machine Extrusion system Extrusion line Screw extruder Melt processing machine Plastic processing machine Pipe production machine Profile extrusion machine Continuous forming machine Melt and forming system

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines Ndjdpfx Aeyzh Ulskqsc - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Complete extrusion line / extrusion system including packaging technology For sale is a complete, fully operational extrusion system for food products. The system consists of several coordinated components and covers the production process from mixing the raw materials through extrusion, drying, and cooling to packaging. The mixer is designed for batches of up to approximately 300 kg. The installed single-screw extruder achieves – depending on the raw materials used, the recipe, and the process parameters – a production output of approximately 70–90 kg per hour. Scope of supply / components of the extrusion line: 1. Mixer – designed for up to approximately 300 kg 2. Single-screw extruder – output approximately 70–90 kg/h 3. Conveyor screw / conveyor system 4. 3 × product or intermediate hoppers 5. Drying oven / belt dryer – approximately 5 meters long 6. Exhaust and ventilation system 7. Cooling system / cooling drum 8. Doypack packaging machine 9. Flowpack packaging machine The system enables a largely continuous production process from raw material preparation to the finished, packaged end product. Technical design All components were manufactured in Ukraine and are CE-certified. All parts and surfaces that come into direct contact with the product during the production process are made of stainless steel. The entire production line has a length of approximately 28 meters in the configuration shown. Individual machines and components can be arranged differently if necessary, depending on the available production space. Possible applications The extrusion system is suitable, for example, for the production of: Puffed and snack products rice or grain-based products cereals and extruded products functional snacks other extrudable food products The actual production output and the final product depend on the raw materials, recipe, die, and the respective extrusion and drying parameters. Inspection of the system is possible after prior appointment. We will be happy to provide further technical information, images, and details on the individual machines upon request. It is also possible to purchase the individual machines separately. The price list is as follows: Ndedpfxeztkxbo Akqec 1. Mixer – designed for up to approximately 300 kg - €5,000.00 2. Single-screw extruder – output approximately 70–90 kg/h - €15,000 3. Conveyor screw / conveyor system - €2,500.00 4. 3 × product or intermediate hoppers - €1,000.00 per hopper 5. Drying oven / belt dryer – approximately 5 meters long - €20,000 6. Exhaust and ventilation system - €500.00 7. Cooling system / cooling drum - €2,000 8. Doypack packaging machine - €18,000 9. Flowpack packaging machine - €15,000

Year of construction: 2025, condition: excellent (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Nodpjz Eg Rzjfx Akqedc Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: R500, FiberFlow R500 Cooling Die for Sale The FiberFlow R500 Cooling Die is a specially developed solution for structuring alternative proteins in High Moisture Extrusion (HME). The cooling die is designed to produce fibrous protein structures through controlled cooling and optimized flow guidance, making it particularly suitable for applications such as plant-based meat and seafood alternatives, as well as structured convenience products. The FiberFlow R500 is designed for throughput rates of up to 500 kg/h at operating pressures of up to 70 bar. Its annular (ring-shaped) geometry ensures optimal flow distribution, resulting in uniform fiber formation and consistently high product quality. The system features a modular design and is sold as a complete unit consisting of four segments. Njdpfxey Um Tgo Akqodc Particular emphasis has been placed on hygienic design, enabling the system to meet the stringent requirements of the food industry. The construction allows for easy and efficient cleaning. The FiberFlow R500 is designed for seamless integration into existing extrusion lines and can be incorporated into continuous production processes without difficulty.

Condition: good (used), screw conveyor diameter: 45 mm, screw conveyor length: 1,125 mm, Twin-screw extruder, Weber DS45 model, for sale. This includes the complete line with water bath and pull-off unit. The machine was in use until recently and is fully functional. Includes documentation. - Twin screw - Screw diameter 45 mm - L/D ratio 25 Ndsdpfxe Adnyus Akqec - Previously used for manufacturing furniture profiles Loading with a forklift. Delivery possible by arrangement. We can prepare the export documents.