Used Feed for sale (11,825)

Condition: used, machine/vehicle number: 007668, Max. panel width: 1200 mm Max. panel length: 2400 mm Dodsu Huwcepfx Ap Ieku Movement system: suction cups.

Condition: ready for operation (used), functionality: fully functional, L & Z Lathe WEILER Matador -Center height 140mm -Distance between centers 500mm -Speed range (continuously variable speed adjustment) 25-3000 RPM -Spindle bore approx. 36mm -Automatic longitudinal and cross feeds -Thread cutting / Metric / Inch, etc. -Tailstock / Morse taper MK3 -Electric chuck guard -Multifix with insert -Three-jaw chuck with interchangeable jaws -Machine feet -Change gears -Drill chuck & rotating center -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight approx. 600 kg Errors and omissions excepted. Dodpfx Ajz Nltdop Isku

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, L & Z lathe / WEILER CONDOR AC / Stepless speed control / FROM AN EDUCATIONAL INSTITUTION - CE marking - Year of manufacture: 2000 - Swing over cross slide: 180 mm - Distance between centers: 165 mm - Max. swing: 330 mm - Turning length: approx. 800 mm - Speed (stepless): max. 2800 rpm - Automatic longitudinal / cross feeds - Threading / Metric / Inch etc. - 3-jaw chuck Dedpfxez Izi Ds Ap Isku - Tailstock - Chip guard - Machine light - Multifix base and 6 inserts - Various change gears - Coolant system - Various operating tools - Documentation Dimensions: L x W x H: 1.8 x 1 x 1.8 meters / Weight: 1300 kg Errors and omissions excepted.

Condition: used, Year of construction: 2020, This is a Product Pump with the Balance tank for viscous products ie. yoghurt, pastes, cream, etc. It is designed to transfer the product from A To B without overheating or beating the product. This is located on skid with an extra high speed volume pump for the CIP wash down of the system. Control panel is included in the line. Product Pump: For viscous Products CIP: Special CIP Pump on the skid Dkedpfxsz Izh Tj Ap Iju Stainless steel: Yes Electricals: 3 phase / 400v /50-60hz Available: Immediately

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, L&Z Lathe KMUTH BASIC Plus incl. 3-axis digital display - Year of manufacture 2011 - CE marking - Three-axis digital display - Center height 150mm - Max. turning diameter 300mm Dkedpfx Apsz Hwx Es Isu - Max. turning diameter over support 178mm - Max. turning diameter without bridge 430mm - Center distance 810mm - Spindle bore 38mm - Spindle speeds (geared) 60 - 1550 rpm (9 steps) - Automatic longitudinal / facing feeds - Spindle mount - Camlock D1 - 4" - Tailstock taper MK 3 - Quill travel 100mm - Bed width 180mm - Multifix base with insert - Electric chuck guard - Work light - Coaxial center - 3-jaw chuck - 2 x steady rests - Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 550 kg Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, Weiler Matador lead and draw spindle lathe -Distance between centers: 500 mm -Swing over bed: 140 mm -Automatic longitudinal/cross feeds -Thread cutting / metric, inch, etc. -Spindle bore approx. 36 mm -Spindle head: Size 5 -Speed range: (geared) 15–3,550 rpm -Brake motor -Coolant pump -Chuck guard -Forkardt F 160 collet chuck -Quick-change tool holder Multifix & insert Dsdpfx Ajztbbtep Ieku -Drill chuck -Follower rest -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg Errors and omissions excepted

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20,000 h, functionality: fully functional, overall weight: 15,000 kg, rotor diameter: 500 mm, rotational speed (max.): 200 rpm, power: 90 kW (122.37 HP), input voltage: 400 V, type of input current: three-phase, The MeWa Universal Granulator UG 1000 is a high-performance, stationary single-shaft secondary shredder, specifically designed for the fine shredding and recycling of various composite materials and waste. The machine operates according to the principle of a guillotine shear, in which the material is cut between rotating and stationary blades. Drive power: 90 kW Cutting chamber / working width: 1,000 mm Number of blades (rotor / stator): 25/5 blades Rotor diameter (circle of rotation): 500 mm Total weight: approx. 15 tons Screen size: Flexible, interchangeable screens under the rotor determine the final particle size (typically between 10 mm and 80 mm). Dkjdpfsz Antuox Ap Isu

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, L & Z Lathe WEILER CONDOR B incl. three-axis digital display -CE marking -Machine from an educational institution / very well maintained -Center height 165mm -Swinging diameter over bed 330mm -Swinging diameter over cross slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm -Automatic / longitudinal and cross feeds -Threading / metric / inch, etc. -Bar capacity 40mm -Tailstock / Morse taper MT3 -Multifix base and inserts -Three-jaw chuck 200mm -Electric chuck guard -Spindle cover Dodpszvx A Tjfx Ap Ieku -2x Emergency stop -Coolant system -Chip guard -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1200 kg Errors and omissions excepted.

Condition: excellent (used), Catalog number 7828 TECHNICAL DATA - max. width of workpiece 200mm - max. height of workpiece 180mm - 2 grinding units: - top: metal roller + shoe + metal roller - bottom: metal roller + shoe + metal roller - top: - 2 feed rollers, rubber, pulling - grinding unit - 2 feed rollers, rubber, pulling - bottom: - grinding unit - side guide strip - electrically adjustable grinding height 0.37kW Dedpjzxqrlefx Ap Isku - 6 feed speed settings + right/left 2.25; 4.5; 9; 12.5; 18; 25m/min - feed motor 0.75kW - main motors 2x4kW - diameter of dust extraction nozzles 80mm - overall dimensions L/W/H 1500x740x1600mm - weight 560kg ADVANTAGES - Made in Germany - 2 units - Unpainted - DTR documentation - Used grinder, very good condition Net price: 10900 PLN Net price: 2530 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: refurbished (used), functionality: fully functional, Weiler Primus lathe with lead screw and drive spindle. Includes tailstock. The machine can be inspected while powered on prior to purchase. Shipping is possible for an additional charge. Dksdoz Nh Epepfx Ap Iou VAT can be shown separately.

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Dkjdpfxezvdk Ae Ap Iju Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, with new feed rollers used good condition cleaned Dkodpfsz I Udusx Ap Isu functionally tested Manufacturer: Holz-Her Type: ET 117 Machine No.: 7901 Motor with pole change, 2 speeds Roller diameter mm: 110 Roller width mm: 50 Number of feed rollers: 3 Speeds m/min: 4, 6, 8, 12, 10, 15, 20, 30 Weight approx. kg: 50 Location: 97447 Gerolzhofen, free loading, unpacked Handover in current condition, as inspected, without warranty or guarantee.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Dksdpfx Apjy Ez Ere Iou Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Total installed power: 204 kW Speed ​​control: Frequency converter control

Condition: good (used), functionality: fully functional, For sale: a log feeding line with a turner (Interlog AB). The complete line includes: Dkedpfx Asz Az Awsp Iou Log feeding conveyor, length 43 meters Metal detector Log conveyor Log turning device Log dropping conveyor Hydraulic unit and hydraulics All existing electrical and electronic equipment belonging to the line The line has been dismantled and packed into transport packages (a total of 3 loads). The individual components can also be sold separately. The line is located in Sweden. Please contact us, and we will gladly answer your questions and provide you with a good offer!

Condition: ready for operation (used), functionality: fully functional, WEISSER HEILBRONN Junior / L & Z lathe with Heidenhain digital control -Center height 220mm -Turning diameter over bed 440mm -Distance between centers 1000mm -Spindle bore approx. 50mm -Spindle speeds 40 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Heidenhain digital display ND 780 -Forkardt F250 3-jaw chuck -Multifix base and inserts -Electric chuck guard -Follow rest -L & Z spindle cover -Work light -Documentation Dimensions: L x W x H 2.6 x 1.3 x 1.8 meters / Weight approx. 1800 kg Dedpfx Apozwggve Ijku Errors and omissions excepted.

Condition: used, Year of construction: 2003, functionality: unexamined, center height: 300 mm, center width: 1,500 mm, turning length: 1,500 mm, The Löw W570 is a used, conventional lead and follower rest lathe, manufactured in 2003. With a center height of 300 mm and a turning length of 1,500 mm, it is a robust workshop machine for individual parts and repairs. It is equipped with a Givi Misure ME 620 digital display, and the operating manual is available. The machine is located in the Düsseldorf area. Dodpjz H Uhqofx Ap Ieku TECHNICAL DATA - Year of manufacture: 2003 - Center height: 300 mm - Turning length: 1,500 mm - Digital display: Givi Misure ME 620 EQUIPMENT AND ACCESSORIES - Three-jaw chuck (as shown in the photos) - Tool holder on the top slide (as shown in the photos) - Tailstock - Tool set - Operating manual for Löw W 490/570 series CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION For maintenance, training, prototype construction, and job shop turning, i.e., anywhere where individual parts are turned manually. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection by appointment. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact information for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: used, Year of construction: 2000, Colour: Grey Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm - Details: - └ Description: Osama glue roller is no longer available - Year: 2000 - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 Djdpswnhabofx Ap Ijku - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 120 - Heating boiler present: Yes - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Dksdpfjzyx Evex Ap Iju Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: used, Year of construction: 1973, Indexing milling cutter with 3-roller feed spindle, 30 mm diameter. Djdpfxezd Tg As Ap Ioku Location: Nattheim.

Condition: used, Year of construction: 2020, Circular saw feed mechanism as new used in top condition low usage cleaned functionally tested Manufacturer: Panhans Type: 76 Year of manufacture: 2020 CE type-tested kW: 0.14 Motor with pole change, 2 speeds Roller diameter mm: 110 Roller width mm: 2 x 50 mm, 1 x 20 mm (center) Number of feed rollers: 3 Speeds m/min: 13 + 26 New price approx.: 4800.00 Dodpfx Apsz Ebt Ro Isku Weight approx. kg: 30 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition, as inspected without warranty

Condition: ready for operation (used), Year of construction: 2012, L & Z Spindle Lathe ZMM - CU 630 RD incl. Digital Display -CE marking -Digital display -Year of manufacture 2012 -Center height 315mm -Turning diameter over guides 630mm -Turning diameter over cross slide 430mm -Distance between centers 1500mm Dodpfx Aozhx Hvep Ioku -Turning diameter with bridge removed 830mm -Spindle bore 103mm -Automatic longitudinal / facing feeds -Motorized rapid traverse in the carriage -Speed range 16 - 1250 RPM (stepless speed control) -Drive power 11Kw -Three-jaw chuck / ROTAX 315 incl. hard & soft jaws -Chuck guard -Tailstock -Steady rest -Multifix base with inserts -Coolant system -Work light Dimensions: L x W x H 3.5 x 1.5 x 1.7 meters / Weight 4000Kg Errors and omissions excepted.

Condition: used, Second-hand automatic planing and grooving machine, part of a Weinig Hydromat 2000 pre-planing line, with feed mechanism (tilting destacking). The machine has already been dismantled and is ready for loading. The images contain AI-generated sample images for illustrative purposes. The illustration may contain errors. Technical data: - Spindles: 5 - Spindle 1: Bottom / 11 kW / 50 mm / 6,000 rpm Dodpfxez Hy H Ss Ap Ijku - Spindle 2: Left / 11 kW / 50 mm / 6,000 rpm / Jointer - Spindle 3: Top / 18.5 kW / 50 mm / 6,000 rpm / Jointer - Spindle 4: Bottom / 11 kW / 50 mm / 6,000 rpm / Jointer - Spindle 5: Right / 11 kW / 50 mm / 6,000 rpm - Working width: 175 mm - Working height: 80 mm - Feed: 15 kW / 100 m/min - Control: CNC memory system - Max. workpiece length: ~ 6,000 mm

Condition: used, Year of construction: 2001, functionality: fully functional, Gassner closure feeding system with pneumatic lifting station and blower Air transport filter system Dkedpeww Hvmefx Ap Iou Special price due to warehouse clearance: €3,600 ex works Külsheim.

Condition: ready for operation (used), functionality: fully functional, WEILER COMMODOR lathe, from an educational institution -Maximum turning height 180mm -Maximum turning length 1000 mm -Spindle bore 56 mm -Speed range 56 - 2000 RPM Dkedpfx Apjzww D Ee Ieu -Automatic longitudinal/facing feeds -Threading capabilities / Metric / Inch etc. -Tailstock MK 4 -Three-jaw chuck 200mm -Multifix base with inserts -Electric chuck guard -L & Z spindle cover -Work light -Coolant system -2 x Emergency stop -Machine documentation Dimensions: L x W x H 2.5 x 1.1 x 1.7 meters / Weight 1500 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Very robust lathe with a rigid machine bed. L + Z hollow spindle lathe Manufacturer: Grutzpe Model: 2000 / 500 Super AT Turning diameter: 1000 mm Distance between centers: 530 mm Hollow spindle diameter: 140 mm Dedpfjz D Dt Djx Ap Isku Distance between centers above the compound slide: 530 mm Turning length: 2000 mm Bed width: 420 mm Chuck diameter: 315 mm Bridge Dimensions: 6500 x 2200 x 2000 mm Weight: 10,000 kg Accessories: Various Further details: see images