Used Linear Feed for sale (13,791)

Condition: like new (used), Chain feed table, used for feeding and linear transportation of roll goods or log goods. Forward/reverse run (reversing circuit) integrated, end positions are queried via roller limit switches. Iisdpotw Sm Njfx Ap Dsh Feeding length: 2200mm Feeding height: 950mm (adjustable) Drive power: 0.18kW (Getriebebau Nord) Condition: slight paint wear, otherwise as good as new

Condition: like new (used), Year of construction: 2015, operating hours: 1,000 h, functionality: fully functional, Equipment: documentation/manual, DMG MORI / SAUER GmbH ULTRASONIC 20 Machine Data Control system Heidenhain Axes 5 (X / Y / Z / A / C) Travel ranges X / Y / Z 200 / 200 / 280 mm Spindle speed max. 42,000 rpm Tool holder HSK-E32 Tool magazine 24 Rotary table Ø 190 mm Table load capacity, center 10 kg A-axis -5° / +130° C-axis 360° Rapid traverse 40 m/min Footprint L × W × H 2,020 × 2,196 × 2,385 mm Fuse rating 63 A Feed drive X / Y / Z Synchronous linear motors Feed rate max. 40,000 mm/min Input resolution 0.001 mm C-axis speed max. 150 rpm Table clamping Pneumatic / mechanical Tool length max., from spindle nose 200 mm Tool diameter max., automatic tool changer 40 mm Compressed air supply 6–10 bar Air consumption without tool blowing 12 m³/h Additional consumption with continuous tool blowing 25 m³/h Connection, weight, and dimensions Electrical connection 400 V / 50–60 Hz Machine weight 3,900 kg Tool weight max., automatic tool changer 1 kg Total weight of magazine tools max. 24 kg Compressed air connection min. Ø 12 mm Equipment and scope of supply Iiodez Tc Tvjpfx Ap Doh 15 tool holders and other related accessories as shown in the offer photos are included. Technical data is subject to change without notice. Errors and prior sale are reserved. The specifications and scope of supply agreed upon in the purchase contract shall be the basis.

Condition: used, Industrial Bowl Feeder and Linear Feeder, Lysta Vibrator, Used machine Manufacturer: Lysta Vibrator (Albertslund, Denmark) Type (Vibratory Bowl Feeder): D 600/750 (Serial number: 1874) Type (Linear Vibratory Feeder): 400 x 75 (Serial number: 472) Condition: Used, industrial execution Overall dimensions: 710 x 1360 x 1450 mm Technical and operating parameters: Bowl diameter: 450 – 750 mm Linear track size: 200 x 700 mm Electrical data (Bowl Feeder): 220 V / 230 V, 1 phase, 50 Hz, 3.5 A Electrical data (Linear Feeder): 220 V / 230 V, 1 phase, 50 Hz, 0.3 A Iodpfx Aozwdzdep Dsih Design / Operation: Electromagnetic orientation and feeding system with rotary bowl drive and linear transfer track. Suitable Application Areas: This high-precision Danish vibratory feeding system is perfectly designed for automated sorting, orientation, and feeding of small components: Assembly lines and automated cells: Feeding fasteners (screws, nuts, washers), plastic parts, or electronic components in correct orientation to assembly machines or robotic workstations. Packaging systems: Controlled, continuous, or counted feeding of small products into packaging machines. Plastics and metal processing: Orienting and singulating bulk mass components for machining, inspection, or sorting stations.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Iijdpfxjuzn Nne Ap Djh Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: good (used), Vibratory spiral conveyor – feeding system with hopper and linear conveyor SIM SF 500 SIM BB-20 SIM SF 500 vibratory spiral conveyor with SIM BB-20 belt hopper and AKB DTB-UU-750/20 linear conveyor Iodpfxjvi Hkio Ap Doih Manufacturer: SIM Type: SF 500 Vibratory spiral conveyor Diameter: 500 mm Height: 238 mm Spring angle: 18° Weight: 150 kg Direction of rotation: Right-hand rotation → clockwise Spiral conveyor attachment made of high-alloy steel/stainless steel (X5CrNi18.10) Current A, 230V: 8 A Control unit / frequency inverter: RGF - 2 Input voltage: 230 V Output voltage: 0-200 V SIM BB-20 belt hopper, 20 liters Filling volume: 20 liters Max. filling weight: 35 kg Discharge width: 80 mm Belt speeds: 0.1 - 0.6 m/min Hopper basin, discharge chute: stainless steel Drives: AC geared motor 230V / 50Hz Control unit / frequency inverter: RGF - 2 Input voltage: 230 V Output voltage: 0-200 V AKB DTB-UU-750/20 Linear conveyor Delivery without enclosure Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Brand: Nawi / Newtec Scale type: Newtec 2012 Number of weighing channels: 12 lines Weighing range: up to 2000 grams Component specifications: - Bucket tipper: with chain feed conveyor (track width 850 mm, length 2000 mm) Iedpfxjyku I Ae Ap Djih - Screw conveyor with discharge conveyor: screw diameter Ø 400 mm, length 4500 mm, discharge height 1500 mm - Infeed hopper: opening approx. 1100 x 1300 mm Floor passage is not included. The professional weighing and packing line by Nawi / Newtec is an advanced stainless steel system dedicated to precise portioning and transportation of products in the food processing industry. The heart of the set is a 12-channel Newtec scale, enabling fast and accurate weighing of portions up to 2 kg. The system is designed for full automation – from raw material loading with the bucket tipper, through efficient screw conveying, up to final weighing.

Condition: used, Vibratory hopper, dosing hopper, storage bunker, linear vibratory feeder, sorting device Vibratory bowl feeder, spiral feeder / vibratory feeder Vibratory bowl, screw feeding with vibratory feeder for screwdriving technology Feeding system, feed device Manufacturer: MÜLLENDERS Type: MLF-G2 Year of manufacture: approx. 2000 Hopper capacity: approx. 4 liters Vibration frequency: 6000 Hz Control voltage: 24 volts DC (an external power supply is required) Mains connection: 230 volts, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24 VDC power unit). - REO control unit, type Reovib RS6 439-459, for adjustable vibration speed - Stainless steel hopper, hopper open to the rear - Base frame made from aluminum profile system Required space L x W x H: 380 x 210 x 700 mm Weight: 20.5 kg Iodpfxoy E T Dto Ap Deih Good condition

Condition: good (used), A good used linear weigher with Digiway controls - this machine is a single head weigher with 4 vibratory feed trays - loadcell technology and Digiway controls for fast accurate weighing and filling or granular free flowing products. Iiedpfsu U Ai Hox Ap Doh

Condition: used, Vibratory hopper, dosing hopper, storage hopper, vibratory linear feeder, sorting device Vibratory screw feeder, screw feeder / vibratory feeder Vibratory bowl feeder, screw feeder with vibratory feeder for screw feeding technology Iiedpfx Apoz N H Ebe Dsh Feeding system, feeding device Manufacturer: MÜLLENDERS Type: MLF-G Year of manufacture: approx. 2000 Hopper volume: approx. 18 liters Vibration frequency: 6000 Hz Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24VDC power supply). - Control unit REO, type Reovib R6 439, for adjustable vibration speed - Hopper made of stainless steel Space requirement L x W x H: 900 x 300 x 310 mm Weight: 30 kg Good condition

Condition: used, Linear feeder / Vibratory feeder / Sorting device Vibratory linear feeder, vibratory hopper, dosing hopper, storage hopper Vibratory bowl feeder, bowl feeder Iijdpfx Aexf Urvep Doh Vibratory bowl, screw feeding system with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Year of manufacture: approx. 2000 Useful load: approx. 1.5 kg Oscillation frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W = 170 x 60 x 12 mm - Mounted track length 340 mm - Overall height with base plate and oscillating plate approx. 115 mm Required space L x W x H: 400 x 280 x 400 mm Weight: 9 kg Good condition

Year of construction: 2012, condition: good (used), Linear feeder of the company Wolfgang Hörmle. In good condition for sale. Manufacturer: Hörmle Type: KF 07-1 Voltage: 220 V Conveying length: 380 mm Height: 150 mm Iiodpsif D Nzofx Ap Deh

Condition: used, machine/vehicle number: 007668, Max. panel width: 1200 mm Max. panel length: 2400 mm Iedpfxsu Huwcs Ap Deih Movement system: suction cups.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Iodpfez D Aqujx Ap Dsih Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 560 mm switched on hours: 78.328 h spindle hours: 38.073 h control: Heidenhain iTNC 530 tool changer with: 30 Plätze tool taper: HSK-A 63 Isdpfx Apjzp Dvrj Dsih feed speeds infinitely variable: 90 mm/min rapid traverse:: 90 m/min table-size: 950 x 650 mm table load capacity: 1000 kg total power requirement: 73 kVA Weight approx.: 11,0 t dimension machine approx.LxWxH: 4,9 x 4,3 x 3,15 m The DECKEL MAHO DMC 75 V linear is a highly precise vertical CNC machining center equipped with linear drive technology, making it ideal for 3-axis machining. *

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Iedpju Hkb Rjfx Ap Dsih Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: excellent (used), Year of construction: 2014, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 167 Nm, overall weight: 35,000 kg, Initial commissioning: December 2014 Control system: Fidia X-axis: approx. 2,200 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,200 mm A-axis: ± 100° C-axis: ± 275° Machine operating hours: approx. 68,000 h Total spindle hours: approx. 26,500 h Clamping table: 2,000 x 3,500 mm with T-slots 2-axis fork milling head Spindle power: 70 kW Spindle speed: max. 15,000 rpm Iisdeyrc Akepfx Ap Dsh Torque: max. 167 Nm Tool holder: HSK 100A Tool clamping: hydraulic Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Connection data Voltage: 400 V Frequency: 50 Hz Dimensions, weights Required space for machine without peripherals: approx. 8,000 x 6,000 x 5,000 mm Total weight: approx. 35,000 kg Additional equipment - Coolant system - 26-place tool changer - Work area enclosure - Chip conveyor Available at extra charge: - Wireless touch probe - BLUM laser Condition of the machine Fully operational, very good condition. Can be inspected under power.

Condition: excellent (used), FAM ILC-2 Linear Dicer / Slicer – Stainless Steel The FAM ILC-2 industrial dicer/slicer is designed for continuous and precise cutting of food products into dice, strips, slices, and other formats, depending on the installed blade and accessory set. Manufactured by FAM, a specialist in industrial cutting systems, the ILC-2 uses a multi-stage cutting process to obtain pieces with regular and repeatable dimensions. It is particularly suitable for processing lines that require high cutting uniformity and continuous production. Its construction primarily in stainless steel, continuous feed, and robust cutting system allow it to be integrated into professional processing lines for fruits, vegetables, and other food products. MAIN FEATURES -Manufacturer: FAM -Model: ILC-2 -Type: Industrial linear dicer/slicer -Application: cutting and size reduction -Automatic and continuous processing -Multi-stage cutting system -Configurable for different cutting dimensions -Production of dice/cubes -Option for strips and other formats depending on tooling -Continuous feed system -Interchangeable blade sets -Construction primarily in stainless steel -Driven by an electric motor -Protected cutting chamber -Robust design for industrial production -Access for cleaning, maintenance, and blade changes -Integrable into automatic processing lines CUTTING PROCESS The FAM ILC-2 receives the product and guides it towards the various cutting elements of the machine. Depending on the installed tooling, the product passes through successive cutting stages. In a typical dicing configuration, the system performs the necessary cuts in different planes until dice with regular dimensions are obtained. The final size and geometry depend directly on the configuration of blades, slice guides, and installed cutting elements. It can be used for: Dicing Strip cutting Slice cutting Uniform size reduction Product preparation before cooking Isdpfx Apsznaqcs Djih Preparation for IQF freezing Pre-packaging preparation APPLICATIONS Particularly suitable for fruit and vegetable processors, manufacturers of frozen products, canneries, and producers of prepared meals that require uniform industrial cutting. Depending on the installed tooling and the characteristics of the product, it can be used for potatoes, carrots, onions, fruits, vegetables, and other food products. The combination of FAM technology, ILC-2 model, continuous cutting, and interchangeable tooling provides a versatile solution for industrial cutting and dicing lines. Machine available for inspection. Additional technical information, dimensions, blade configuration, additional photographs, or videos can be provided upon request.

Condition: good (used), Year of construction: 2011, operating hours: 46,500 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 3,600 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, nominal power (apparent): 130 kVA, controller manufacturer: Siemens, controller model: 840SE, workpiece length (max.): 3,600 mm, workpiece width (max.): 1,100 mm, workpiece diameter (max.): 1,100 mm, workpiece weight (max.): 5,000 kg, total height: 3,042 mm, total length: 9,280 mm, total width: 4,608 mm, table width: 1,100 mm, table length: 4,200 mm, table load: 5,000 kg, rotary table diameter: 1,050 mm, rotational speed (max.): 50 rpm, overall weight: 32,050 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 21,500 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 120, mount diameter: 1,050 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, DMF 360 linear, manufactured in 2011, with Siemens 840D Solutionline control 120-position tool changer HSK 63 tool interface Spindle speed 18,000 rpm Chip conveyor Coolant system, 1000 liters, 80/40 bar Work area enclosure 3D probe, Heidenhain Blum laser Handwheel Air blow through the spindle Coolant nozzle Automatic doors A-axis, Lehman EA 420 Hydraulic clamping system for rotary table Iodpez Riy Rjfx Ap Djih Robot interface Oil and emulsion mist separator

Condition: excellent (used), FAM YURAN Linear Dicing/Cutting Machine – Stainless Steel FAM YURAN industrial linear dicing/cutting machine, designed for continuous and precise cutting of food products into cubes, strips, and other geometries, depending on the blade set installed and the working configuration. Manufactured by FAM, a specialist in industrial cutting technology, the YURAN is designed for use in high-capacity processing lines, providing a regular and repeatable cut size. Its construction primarily in stainless steel, continuous feeding system, and hygienic design make it especially suitable for processing plants for vegetables, fruits, meat products, and other foods that require size reduction before subsequent processing stages. MAIN FEATURES -Manufacturer: FAM -Model / Series: YURAN -Type: Industrial linear dicing/cutting machine -Automatic and continuous processing -Product cutting into cubes -Possibility of other cutting formats according to installed tooling -Continuous product feed -Industrial blade system -Uniform and repeatable cutting -Construction primarily in stainless steel -Protected cutting area -Integrated control panel -Robust construction for industrial production -Hygienic design for the food industry -Access for cleaning and maintenance -Integrable into automatic processing lines PROCESS The FAM YURAN is designed to receive the product continuously and guide it in a controlled manner to the cutting unit. During its passage through the machine, the product goes through the different cutting stages necessary to obtain the required final format. Depending on the blade set and configuration installed, cubes, strips, or other product sizes can be obtained. Once the cutting is complete, the product is discharged continuously to continue to the next production stage. Iiedpfezxk Tcox Ap Deh It can be integrated with: Feeding systems Conveyors and elevators Product washers Peelers Inspection tables Scalders and cookers Cooling systems IQF freezing tunnels Weighing systems Filling and packaging machines APPLICATIONS Especially suitable for fruit and vegetable processors, manufacturers of frozen products, ready meals, and other food industries that require a high-capacity automatic cutting system. Depending on the installed tooling, it can be used for vegetables, fruits, and other food products, obtaining different cutting formats and dimensions. The combination of FAM technology, continuous linear cutting system, and industrial construction in stainless steel provides a versatile solution for professional food preparation and dicing lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, pneumatic linear drive or slide cylinder from Festo. Festo DGPL-18-750-PPV-A-KF-B Part number: 161977 Max. operating pressure: 8 bar The DGPL is a pneumatic cylinder without a piston rod and with integrated guidance. Compressed air drives the slide back and forth along the long guide rail. The 750 indicates a stroke of 750 mm, and the 18 indicates the size/piston diameter class. Typical applications include positioning, moving, or feeding workpieces in machines and automation systems. Festo data sheet for part number 161977 Type DGPL-18-750-PPV-A-KF-B. • DGPL = pneumatic linear drive without a piston rod with integrated guidance. In this version, it is a ball bearing guide. • 18 = piston diameter 18 mm. • 750 = in your specifically labeled unit, 750 mm stroke. According to Festo, the series can generally be configured with strokes from 10 to 1800 mm. • PPV = pneumatic end-of-stroke cushioning, adjustable on both sides. The slide is thus pneumatically braked shortly before its end positions; Festo specifies a damping length of 16 mm here. • A = version with position detection/proximity switches; in this series, sensors can detect the position or end positions of the piston. • KF = ball bearing guide (in contrast, for example, to GF, which is a slide guide). It ensures precise and robust guidance of the slide. • B = variant/series identifier of the DGPL version. Important data for your drive It is double-acting, meaning it is actively moved in both directions with compressed air. The permissible operating pressure is 2–8 bar. At 6 bar, Festo specifies a theoretical force of 153 N in both directions – approximately equivalent to the weight of 15.6 kg, although the actually usable force is lower. The pneumatic connections are M5. Permissible ambient temperature: -10 to +60 °C. Ijdpfxjzyltyo Ap Doih The two compressed air connections drive the internal piston. The piston is mechanically connected to the slide, which runs on the outside, via the longitudinal slot. This provides 750 mm of linear movement without a 750 mm long piston rod, which would have to extend an additional distance out of the cylinder.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 42,222 h, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, total width: 1,990 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 310, product length (max.): 4,500 mm, number of axes: 8, This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine is equipped with two turrets, each with 12 driven tool positions, and offers a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. The machine comes with a large and valuable set of spare parts and components. Contact us for further details. Isdpfxozhklwo Ap Dsih Control system: CNC 310 isTotal hours: 61295 hOperating hours: 42222 hMain spindle power 20/25 kWCounter spindle power 17 kWMax. main spindle speed: 5000 rpmMax. counter spindle speed: 5000 rpmMax. main spindle bar diameter: 65 mmMax. counter spindle bar diameter: 45 (65) mmCNC CONTROLLED AXESStroke X1 165 mmRapid speed X1 30 m/minAcceleration X1 5 m/s2Stroke Z1 678 mmRapid speed Z1 30 m/minAcceleration Z1 5 m/s2Stroke Y1 80 (+50/-30) mmRapid speed Y1 30 m/minAcceleration Y1 5 m/s2Stroke X2 165 mmRapid speed X2 30 m/minAcceleration X2 5 m/s2Stroke Z2 640 mmRapid speed Z2 30 m/minAcceleration Z2 5 m/s2Stroke W2 690 mmRapid speed W2 30 m/minAcceleration W2 5 m/s2Number of turrets 2Number of rotating tools each station 12 all driven positionsTool system VDI 30Max driven tool speed 4.000 rpmApprox. coolant tank capacity 650 lCoolant pump max.capacity (per each turret) 20 l/minPump pressure 7 barPower supply 91 kVALxWxH of the machine 4.500x1.990x2.300 mmApprox. machine weight 9.500 kgThe machine comes with a large and valuable set of spare parts and components.IEMCA MASTER 865 MP 43 L (4m) bar feederBase machine configuration:- Drive for slide 1 and 2 (all 12 pos.)- C-axis for main and counter spindle- Y-axis for slide 1- Swarf conveyor belt type- Counterspindle collet cleaning with coolant- Workpiece unloading including belt- Mechanical preparation for oil mist filter- Electrical and software interface for bar loader- Angular synchronism between main and counter spindle- Automatic machine shut down- 2 additional on/off outputs (4 M-functions)- Rigid tapping- Piece and time counter- Software for polygonal turning for slide 1 and 2- Constant cutting speed- Helical interpolation for slide 1- Spindle speed control- Quadruple warning light- Cooling device for electrical cabinetEquipment:Collet chuck Type MPF 65/140 without axial feed for main spindle max. diameter: 65mm.Manual collet changerDifferential pressure for counterspindle, possibility of setting two different clamping pressures.Chuck type "SMW 175-BBD" For counter spindleTool holders as visible on the turretsControl system options:I-V12060 Tool wear monitoring system Monitor for CNC FANUCI-V12070 Sister tool selection system for Tool Monitor for CNC FANUCHydraulic and filtration equipment:I-V40045 External flushing of jaws/collets with coolant on main spindle and counter spindleSpecial optionsSK001 Special clamping device with mandrel for counter spindle product HAINBUCH AXFIX 811 including 2 collets Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Linear unit, linear axis, portal axis with servo drive, synchronous servomotor, electric slide, loading unit, linear guide with servomotor and pneumatic gripper REXROTH INDRAMAT Type: MKD0771B-061-KP1-KN Identification No. 247238 0001 Year of manufacture: 2000 Iijdsgi E Hajpfx Ap Deh Axis travel: 2400 mm Slide length: approx. 500 mm Overall length: 3520 mm - pneumatic feed clamp (clamping device with 2 Festo pneumatic cylinders) - standard linear guide 65 x 25 mm - base profile made of steel - ball screw Ø 32 x 10 mm - pneumatic, with position indicator - permanent magnet servomotor Type: MKD071B-061-KP1-KN (Part No: 261989, Serial No. MKD071-50234, brake with 24 Volt DC) Overall dimensions L x W x H: 3520 x 400 x 580 mm Weight: 340 kg good condition possible drive controllers under stock number 53628 and stock number 53673

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 Speed : 18000 rpm Movement X/Y/Z : 3600/1100/900 mm Tool holder : HSK 63 In General: Year of manufacture:2012 Control system:Heidenhain iTNC 530 Travel range X/Y/Z:3,600/1,100/900 mm Speed:18,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Speed:18,000 rpm Max. power:35 kW Max. torque:130 Nm Tool holder:HSK 63 NC swivel head: B-axis:+/- 100° Resolution:0.001° NC rotary table: C-axis:360° Resolution:0.001° Clamping surface:1,050 mm Max. table load:1,200 kg Fixed table: Clamping area:4,200 x 1,100 mm Max. table load:1,200 kg/m Iiodpfxsz S S Ele Ap Deh Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Positioning sensors:Direct scales X-Axis:Direct drive Chip removal:Chip conveyor Coolant supply:Internal cooling system, 40 bar Tool measurement:LASER Workpiece measurement:Touch probe Set-up:Electronic handwheel

Condition: like new (used), Year of construction: 2011, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,900 mm, Here, we offer the following well-maintained, used injection molding machine for sale as part of our injection molding machine trading business. Iisdpfoz Spq Sjx Ap Doh We also purchase well-maintained injection molding machines, with a focus on models manufactured from 2010 onwards. We have been a wholesaler of used injection molding machines and peripheral equipment for injection molding applications for over 27 years. Handling unit in top condition. Manufacturer: Geiger Type: Midliner 3.O V5.0 Year of manufacture: 2011 Operating hours: approx. 20,000 hours Dimensions: X-axis, ejector stroke: 300 mm Y-axis, vertical stroke: 1000 mm Z-axis, traverse stroke: 1900 mm Includes programming unit: HT320Z Tried-and-tested line-based programming PC interface via USB Program assistant - Available for immediate loading onto the buyer's truck from our warehouse in Hanover/Germany, or available for delivery to your location with shipping costs covered – worldwide delivery possible. - The machine was tested before dismantling. - The machine is our sole property. - The requested machine is available in our warehouse in Hanover and will be offered after a functional test and can be inspected while powered on. For information about the machines we offer and our company: - We only sell machines that we have purchased from ongoing production and that are stored in our warehouse in Hanover. - All machines offered are inspected and tested before dismantling. - We do NOT sell insolvency goods. We are NOT an intermediary that deals with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course. - All machines offered can be inspected at our warehouse.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 48,000 h, functionality: fully functional, turning length: 1,080 mm, turning diameter: 600 mm, spindle speed (max.): 2,500 rpm, total height: 2,140 mm, total length: 5,300 mm, total width: 2,160 mm, overall weight: 9,000 kg, spindle diameter: 530 mm, Equipment: documentation/manual, Gildemeister CTX 620 — это тяжёлый токарно-фрезерный ЧПУ-станок, предназначенный для обработки крупных и сложных деталей. Станок оснащён гидравлическим патроном 21″, системой управления Siemens Sinumerik 840D, а также осью C, осью Y и приводным инструментом, что позволяет выполнять на одном станке токарную обработку, фрезерование, сверление, нарезание резьбы и другие операции. Большая рабочая зона, высокая жёсткость конструкции и мощный шпиндель позволяют выполнять как тяжёлое черновое точение, так и точную чистовую обработку деталей большого диаметра и длины. CTX 620 особенно хорошо подходит для серийного производства, где важно сократить количество установок детали и обеспечить стабильную точность обработки. Iisdpjz Ehgqjfx Ap Doh