Used Extruded for sale (398)

Condition: excellent (used), Year of construction: 2017, Snack & Filled Stick/Pillow Production Line -Production capacity: 200 kg/h -Power requirement: 62 kW, 380 V / 50 Hz -Certification: ISO 9001 / 14001 / 18001, CE certified General description: Complete automatic line for the production of extruded snacks and filled sticks/pillows. The system is designed for continuous operation and includes all stages from raw material hydration to ready-to-season product cooling. All main components are made of stainless steel 304, ensuring full food-grade compliance and easy cleaning. Main components: -Corn moisturizing mixer (300 kg) with water dosing and metal impurity magnet. -Helix feeder with automatic extruder feeding and safety grid. -Extruder (200 kg/h) with 50 HP motor, LS inverter control, SKF bearings, 5 interchangeable dies, and air cooling system. -Air-current conveyor transferring product to the dryer. -Dryer (gas or electric) insulated double-wall stainless cylinder with inverter speed control. -Seasoning drum (Ø 85 cm × 3 m) with inverter speed control and spray coating system. -Two flavor & oil mixers, double-jacketed, 200 kg capacity each. Ksdexqmxfspfx Agzjnf -Flavor pump with inverter-controlled dosing. -Cutter for sticks/pillows length adjustment. -Cooling conveyor with fans for product cooling before packaging. -Butter melting tank and stuffing mixer tank, both double-jacketed, temperature-controlled. Control system: Centralized Schneider & LS electrical control panels with full motor protection, inverter speed control, and automatic temperature regulation. Overall dimensions: Approx. 15 m (L) × 3.5 m (H)

Condition: used, GS Mach approx. 6.5" extruder with Water Ring Pelletizer, with Water Ring Pelletizer, spin dryer, screen changer, and hopper, includes all control panels, 177 HP, 3 phase motor, also includes Color Feeder, in working condition, winning bidder responsible for proper disconnection and removal. Ksdpfexd D Nnox Agzjnf

Condition: used, Used Winkworth model ZX500-6 stainless steel jacketed z-blade mixer / extruder. Approximate working capacity 500 litre with total capacity 778 litre (product dependent). 304 stainless steel chamber measures approximately 1,090mm long x 956mm wide x 735mm deep. Unit has vacuum rated domed hood/lid. 304 stainless steel external jacket. Each Z-blade driven by 30kw motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Kjdpfx Asx Nixbegzjnf

Condition: used, Production line consisting of: Knedpfx Aox I I Ncjgzjf (1) Conical twin-screw extruder Technical details: Screw diameter 43 mm, capacity: max. 150 kg/h, KraussMaffei-Berstorff control system, weight 2.3 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Equipped with three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Technical details: Speed approx. 0.1 - 11 m/min, pulling force approx. 25,000 N, contact length approx. 1,500 mm, profile clearance approx. WxH 300 x 180 mm, with film application unit (1) Sawing unit Technical details: Upstroke, saw blade diameter 250–400 mm, profile clearance WxH 340 x 20 mm / diameter 115 mm, cycle max. 40 cuts/min (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: new, Year of construction: 2025, Good, used demonstration machine Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Kodpfsd Nm Sijx Agzonf Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: new, The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. - The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality can be easily processed. The one-sided swivel saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, Kedpfxou R S Hcj Agzjnf work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Year of construction: 2001, condition: ready for operation (used), This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information. Ksdpfx Agjx I S N Hszenf Application Types Extrusion

Condition: used, Polystruder Extruder with Berringer water ring Pelletizer, 250 HP, 3 phase motor, with screen changer, includes spin dryer, and hopper. Knjdpfxsxd D I Dj Agzof

Condition: excellent (used), Year of construction: 2012, Reading Bakery Systems Low Pressure Extruder Knjdpfxox Edfxs Agzof 2012, Stainless, accurate production of a wide range of products including pretzels, shapes, sticks, braids, sushki, and other co extruded products, touch screen controls, twin hopper, efficient and precise dough forming, consistent and accurate piece weights, quick and easy product changeover, jacketed extrusion housing for temperature control, lightweight plastic hoppers for easy sanitisation, bandcutter operates 275 cuts per min or in a cycle mode up to 50 cpm, capable of 1500Kgs per hour, mobile, with pallet of spares, 3Ph

Condition: used, Production line consisting of: (1) Twin-screw extruder Knsdpfx Agox I I Ilszof Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off/saw combination Technical details: Weight approx. 1.8 t, with two (2) IDE chip extraction systems ME AS 58 (1) Tilting table Technical details: Length approx. 6 m, weight approx. 300 kg

Year of construction: 1999, condition: good (used), Brand: Hans Weber GmbH Knodpfx Agox Ek Tlezof Model: ZE 20 Screw type: Single screw Year of manufacture: 1999 Screw diameter: 20 mm L/D ratio: 20 L/D Motor power: 3 kW Control voltage: 200 V Dimensions (LxWxH): 3100 x 1200 x 1280 mm Weight: approx. 300 kg Other: – Including swivel mounting arm – Including extra connection box

Condition: ready for operation (used), Extruder + electric cabinet output: 200 kg Heads not included Winder not included Knsdpox Dd Hmefx Agzjf

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 6900 mm Measurements depth 32400 mm Measurements height 4800 mm This ROLBATCH RBSDMS-IZS-678 was made in 2016. It is equipped with a Mill PLC control unit. The machine has a maximum film thickness of 0.3-1 mm. Application Types Extrusion Kedpfx Agjx I S Ngszsnf

Condition: like new (used), High-Quality Meltblown Production Line for Nonwovens A comprehensive machine inspection by the manufacturer's service department was carried out on 17 December 2025. Report to follow Operating hours: 80 hours (commissioning only) Price for a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of construction: 2021 • Last commissioning: 2022 Technical Specifications • Working width: 1,600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per metre width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min Ksdpsx Hx Rnefx Agzjnf • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating capacity of rotary beam: 65–172 kW • Winding station: Contact winder with preset reel change • Maximum winding diameter: 1,250 mm • Web width: 1,700 mm • Winding tension: 10–100 N/m Additional Equipment and Accessories • 3-component dosing system • 80 mm seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Cutting knives • Central control panel with touchscreen and data input

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 65 mm, weight 2.8 t /// Drive: Thyssen Henschel TPM 3-65-DOS-25, serial number 6333547/13, weight 710 kg (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit Technical details: Contact length approx. 1,500 mm (1) Film application unit (1) Saw unit Technical details: Upward stroke, saw blade diameter 250–400 mm, profile gap WxH 340 x 20 mm / diameter 115 mm, sequence max. 40 cuts/min (1) Tilting table Technical details: Kedjx I Itbepfx Agzjnf Length approx. 6,000 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Knedpfx Asx I Inxegzjf Technical details: four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Ksdpox I Ig Usfx Agzenf Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Length approx. 6,000 mm (1) Twin-screw extruder Technical details: Screw diameter 90 mm, max. capacity 300 kg/h, BMCsmart control panel, weight approx. 3 t /// Drive motor HENSCHEL T1MAX90 C-35L, serial number 43-220/5, weight approx. 1.5 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Year of construction: 1971, functionality: fully functional, 4-Roll Rubber Calender 1. Manufacturer • Manufacturer: Comerio Ercole 2. Machine Identification • Machine type: 4-Roll Rubber Calender • Roll dimensions: 18" × 54" – Roll diameter: 18 inches – Roll length: 54 inches 3. Year of Manufacture and Modernization • Original year of manufacture: 1971 • Modernization history: Machine regularly upgraded until 2018 4. Intended Use • Calendering of rubber compounds • Designed for continuous operation in tire and rubber production lines 5. Control and Automation • Upgraded control system implemented in 2012 • MMI system installed in 2001 • Control panel equipped with Beckhoff components 6. Mechanical and Process Upgrades Mechanical Upgrades • Installation of new calendar rolls (2018) • Optimization of the spool winding unit (2014) • Overhaul of cooling lines (2013) Process Upgrades Kjdpfx Ajx Iug Uegzenf • Gauge measurement system installed (2012) • SQ1 material width measuring system installed (2009) • Cassette winding systems with dedicated control cabinets installed (2009) 7. Drive System • Large industrial electric motor by ABB • Drive system coupled with Comerio Ercole gearbox 8. Plant Configuration • Integrated adjustment for feed extruder (installed 2012) • Cooling section included in the system • Multiple winding stations integrated into the calender line

Condition: used, Year of construction: 1995, functionality: fully functional, 1. Pearl Winder – Gadsden • Enclosed winding machines with yellow safety covers Knjdpfex Itz Rox Agzjf • Multiple rotating winding discs and wire guides • Integrated control panels with push-buttons, indicator lights, and emergency-stop switches • Mechanical winding stations mounted on heavy steel frames • Visible wire feed paths and guiding elements 2. Pearl Extruder – Davis • Extruder assemblies with screw and barrel sections • Downstream guiding and forming components • Control cabinets and local operator panels • Auxiliary equipment including heating/control units and material handling components • Safety devices integrated into the system 3. Carousel and Loader Robots • Articulated industrial robot arm by ABB (orange) • Rotary carousel stations with multiple indexed fixtures • Safety fences enclosing the robot working areas • Integrated control panels next to the robot cell 4. Coil Winding Equipment • Multiple wire pay-off and take-up reels arranged in series • Tension and guide rollers • Winding stations mounted on steel frames • Clearly separated parallel winding positions

Condition: used, Year of construction: 2001, functionality: fully functional, 1. Bead Winder – Gadsden • Enclosed winding machines with yellow safety covers • Multiple rotating winding discs and wire guides • Integrated control panels with push buttons, indicator lights, and emergency stop switches • Mechanical winding stations mounted on heavy steel frames • Visible wire feeding pathways and guiding elements 2. Bead Extruder – Davis • Extruder assemblies with screw and barrel sections • Downstream guiding and forming components • Control cabinets and local operator panels • Auxiliary equipment including heating/control units and material conveying components • Safety devices integrated into the system 3. Carousel and Loader Robots • Articulated industrial robot arm from ABB (orange) • Rotary carousel stations with multiple indexed holders • Safety fences enclosing robot work areas Knsdpfx Aex Itzqogzsf • Integrated control panels next to the robot cell 4. Coil Winding Equipment • Multiple wire pay-off and take-up reels aligned in series • Tension and guide rollers • Winding stations mounted on steel frames • Clearly separated parallel winding positions

Condition: used, Year of construction: 2005, functionality: fully functional, (1) Bead apexing line (1), including AFC, conveyor belt, drum applicator, grinding conveyor, extruder Kodpex Itmyefx Agzsnf

Condition: used, Year of construction: 2012, functionality: fully functional, Documented Modifications/Upgrades: Year Modification/Upgrade 2012 Installation of quadruple extrusion line no. 02 for individual treads 2012 Foundation for quadruple extruder no. 02 2012 Induction heating insert + die on quad. #02 2013 Expansion of extrusion tooling for profile/SW production 2014 2 compact asynchronous motors by Siemens 2017 Extruder screw 150 base quad 2 2019 Advanced closed-loop upgrade 2021 Advanced closed-loop upgrade 2022 New 200 mm screw for Troester extruder Control system: Modern control and visualization units (control panels, operator panels) Technical data: • Extruder screws up to 200 mm (2022) • Base screw 150 mm (2017) • Siemens asynchronous motors (2014) Knsdox Ithdopfx Agzef Maintenance/Condition: Regularly modernized and upgraded 2012–2022 Accessories / Options: Conveyor systems, heating and cooling units, monitoring and measuring stations, winding devices

Condition: used, Year of construction: 1996, functionality: fully functional, Triple extrusion line Technical details: Documented notes: The line has been modernized several times since its commissioning. Component arrangement according to diagram: • Head • Cylinder • Gearbox • Motors • Steel frame Knsdjx Itgajpfx Agzof • Triplex extruder configuration • Control system with Beckhoff interface • Operator screens for displaying extrusion parameters • Winder units designated as “Wickler” • Emergency stop button available • Industrial control cabinets installed

Condition: used, Year of construction: 1969, functionality: fully functional, Banbury Mixer No. 3 with Peripheral Equipment Documented Modifications/Upgrades: Year Modification / Upgrade 1962 Gearbox upgrade, Mixer III 1973 Weighing and feeding system for Mixer III 1981 Exhaust system for Mixer III Ksdpfxjx Itfpe Agzsnf 1985 Batch-off machine, Mixer 3 1985 Temperature control unit, Mixer 3 1995 DC motor 1500 HP, 1700 V, 1678 A 1996 Upgrade to KSBI-L270 Mixer III 2007 Hose scale for Mixer No. 3 2008 Vibration measurement system, Mixer III 2008 Column slewing crane for bale handling, Mixer III 2009 Vacuum lifting system, Kneader III 2010 CMS system for Mixer III 2013 Slab strip cutter for Kneader III 2014 Plate feeding system for Kneader III 2014 Overhead conveyor, Kneader III 2014 2 × floor scales for Kneader III 2014 New control systems for Kneader III 2014 Cooling coils MUAFAN 1+2 – cooling line mill Mixer 2+3 2015 Monitoring system (Mixer I–III) for CMS-Kneader III 2017 Mixer body, Kneader III (replacement) 2023 Rubber Kneader III KSBI-L270 Control System: New control systems 2014, CMS system 2010, DC drive/Automax, PLC batch-off & conveyor, documented AC drives Maintenance/Condition: Regular modernizations and upgrades documented 1962–2023 Accessories/Options: Batch-off machine, plate feeding unit, installation conveyor, strip cutting device, floor scales, bale handling crane, vacuum lifting system, carbon black silos and weighing system, extruder, roll die, roll head with conveyor, cooling systems (dip tank, cooling line, discharge), control systems (DC drive, AC drive, Automax, PLC)

Condition: used, Year of construction: 2016, functionality: fully functional, mileage: 17,500 km, 1. General Description Machine Name: QUADRUPLEX EXTRUDER No. 1 REF No.: FU-FPs 647 2. Functional Scope and System Components The overview presents the complete production line in conjunction with the quadruplex extruder, including material conveying systems, belt guidance, belt scanning, acceleration zones, cross-cutting, and cassette winding stations. 2.1 Main Assemblies - Extruder head - Multiple "swings" (pivoting arms), numbered 0 to 13 - Strip scanning systems ("Scan 1", "Tri Scan", Strip detection 1–4) Ksdjx Irz Njpfx Agzenf - Cross-cutting unit ("cross-cutter") - Cutting machine - "Cutting table" - Conveyor belts labeled BELT 1, BELT 2, BELT 3 Winding Section: - Cassette winders 1–4 - Winding stations labeled "Winder 1–4" Note: Winders 1 and 2 marked "out of service" - Cooling water tank - Cooler - Electrical peripheral equipment, TCU units (temperature control units), control cabinets ("control cabinet", "ctrl.cab.") - Steel platform structures ("platform", cooling section platform) 3. Operating Parameters 3.1 Production Speed 0–30 m/min (specified production speed range) 3.2 Acceleration Section (Acceleration Speed Q1) From the provided calculations: - Basic production speed: 30 m/min = 0.5 m/s - Rocker cycle time: 4 sec - Belt shifting cycle time: 4 sec - Gap length: 2 m - Acceleration length: 8 m - Acceleration time: 16 sec - Speed difference: 2 m/s = 7.5 m/min - Resulting acceleration speed: 37.5 m/min 4. Strip (Material) Specifications 4.1 Strip Dimensions - Strip width: 20 mm – 220 mm - Strip thickness: 1.5 mm – 16 mm - Strip temperature: 10 °C – 45 °C - Strip weight: 0.02 kg/m – 2 kg/m 4.2 Strip Lengths Along the Line (Exact lengths between defined mechanical and sensor points) - Extruder head → Swing 0: 3,997 mm - Swing 0 → Swing 1: 10,279 mm - Swing 1 → Strip detection 1: 14,400 mm - Strip detection 1 → Strip detection 2: 39,159 mm - Strip detection 2 → Strip detection 3: 1,812 mm - Strip detection 3 → Strip detection 4: 27,702 mm - Strip detection 4 → Cross-cutter: 22,032 mm - Cross-cutter → Transfer belt pos. 10: 13,956 mm Other splitting and merging sections: - From splitting point pos. 10.1 → Rocker pos. 5: 17,545 mm - From splitting point pos. 10.2 → Rocker pos. 5: 17,542 mm - From merging point pos. 10 → Belt splitting point pos. 1–4: 17,827 mm Final travel lengths to winding stations: Belt position To cassette station – belt end Position 1: 6,050 mm Position 2: 9,072 mm Position 3: 12,376 mm Position 4: 15,393 mm To Spool Core (inner core) Position 1: 6,844 mm Position 2: 10,004 mm Position 3: 13,346 mm Position 4: 16,325 mm 5. Installed and Referenced Equipment The document lists an extensive chain of equipment references from which the quadrup­lex extruder line is "derived" or which it "includes", for example: - FU-FPs 648 – Cassette winders - FU-FPs 649 – Conveyor modifications - FU-FPs 650 – Extruder modifications - Older equipment from Berstorff (1995–1996) - Triplex winding equipment - Steel structural foundations (2005, 2019) - Conveyor control desks (Erhardt + Leimer, 2019) - Axelent safety fence - Various construction and civil engineering modifications (2018–2019)