Used Extruded for sale (391)

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade manufacturing fixtures, jaws, tooling, jigs and end-use parts.  Designed for use in production, it prints parts that are stronger than machined aluminum,  at a fraction of the cost.  It combines the best surface quality, build size and reliability.  Speed up production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, available only on the X7. Technical specifications: Printer features Dcedpfxjvvldue Agdsb Process: Fused filament fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100-240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available Fibers: Carbon fiber, Carbon fiber FR, Glass fiber, Aramid fiber (Kevlar®), HSHT glass fiber Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Filling: closed cell filling: multiple geometries available Software Eiger Cloud: Slicing, parts and build job management (other options at additional cost) Security: 2-factor authentication, Org Admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 On sale from Location Condition: used Scope of delivery: (see pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 started remaining filament rolls of Onyx (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Dcedpfx Asx Hifvjgdjb

Condition: excellent (used), Extruder for 3D Printing Filament Production – 25/25 L/D We offer a high-quality extruder for the production of 3D printing filament. The system is designed for continuous industrial operation and is characterized by its robust construction, precise temperature control, and excellent material homogenization. Ideal for manufacturers, material developers, and research institutes. Djdexwvqqepfx Agdocb Technical Equipment & Features • Extruder 25/25 L/D – efficiently designed screw geometry for uniform melt quality • High-performance melting zone – precise temperature regulation for consistent filament quality • Die for 3D filament extrusion – suitable for all standard filament diameters • Cooling bath – stable filament take-off and optimized cooling section • Haul-off unit – finely adjustable pulling speed for exact diameter stability • Winding and spooling device – automatic filament winding • Optimally suited for PLA, PETG, ABS, TPU, and many technical materials

Year of construction: 2015, condition: used, max. dia. of grinding wheel 150 mm turning speeds 2850 U/min total power requirement 0,45 kW dimensions 465 x 316 x 302 mm weight 10,7 kg NEW PRICE: ~ 200.00 EURO Description - Double grinding machines from OPTIMUM - a quality product for trade and industry - Heavy-duty, durable industrial design with maintenance-free motor for continuous use - Extruded aluminum housing - Long service life and smooth running thanks to balanced rotor with high-quality ball bearings - Spark guard on each grinding wheel reduces flying sparks - Stable, adjustable workpiece support Dedpfx Aewp S U Eegdscb - Viewing windows made of shatterproof material - Vibration-damping rubber feet - Two universal corundum grinding wheels

Condition: good (used), Year of construction: 2012, functionality: fully functional, Pouch Sealing: • Flat pouches. Djdpfx Agevdptcjdecb • Doypack (stand-up) pouches. Zipper Integration: • Capability to seal all types of zipper closures. Advanced Finishing Operations: • Punching of holes, handles, and easy-open features. • Rounded corners for aesthetic and safety purposes. Branson Ultrasonic Technology: • Ultrasonic sealing of zippers, ensuring precision and durability. Additional Equipment: • Built-in screw compressor (10 bar). • Chiller for the cooling station, ensuring efficient cooling of bottom seals and zipper seals. Technology and Modular Design • The machine's modular design allows it to be tailored to various types of films, including laminated and co-extruded films, while maintaining high precision and process repeatability. • Servo technology ensures excellent control of tension and sealing time, resulting in outstanding product quality and stability. Types of Pouches Produced on the Vegaplus Pouch System: • Three-side-sealed pouches. • Zipper pouches. • Doypack (stand-up) pouches made from a single film or with a separately inserted bottom gusset. • Retort pouches with rounded corners (notch-less). • Side-gusseted pouches with zippers.

Condition: good (used), functionality: fully functional, Year of construction: 2008, Farmet extruder for soybean/rapeseed before final pressing. Used only for limited time. Motor 55kw, capacity 500-750kg/h, depending on material. Available with some spare parts. Djdpfx Asv Ub Utogdscb

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture 2021 Technical data: Working space: 380 × 380 × 420 mm (60 648 cm³) External dimensions (WxDxH): 900mm x 950mm x 1950mm Printing system: double extruder equipped with cleaning system Diameter of the filament: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 places for the filament with automatic exchange system Temperature of the print head (max.): 500°C Temperature of the print bed (max.): 180°C Temperature of the working chamber (max.): 180°C (active heating) Dcedpfxet I Dm Ie Agdjb Temperature of the filament chamber (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax

Condition: as good as new (ex-display), functionality: fully functional, mileage: 2,500 km, power: 115 kW (156.36 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,100 mm, overall weight: 3,500 kg, first registration: 07/2022, loading space length: 4,800 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: steel, number of seats: 3, Year of construction: 2022, fuel: diesel, Equipment: ABS, air conditioning, cable winch, cruise control, hydraulics, onboard computer, trailer coupling, Sliding platform COULISSALU 3.5 Hydraulic Aluminium platform 4990x2060 remote control for platform and winch Slide for winch Hydraulic Winch BULL 3500 -steel CABLE Towhook High flyer with LED lightbar LED working lights Sliding platform COULISSALU 3.5 Hydraulic Platform in high-quality extruded aluminum section 4990x2060 Profiled railings with 12 lashing points Electric tray control box with integrated fuses Manual winch and ball translation on platform 2 galvanized wheel chocks Tow hitch and towing ball with cranked ball joint and 12V 7-pin socket GRAND ARCEAU - Flyer-type rollbar with LED ramp BULL 3500 hydraulic winch Radio control of platform and winch LED work lights on roll bar Dodpfevv Hrasx Agdscb

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Dcodpfxox Apcks Agdob

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, screw diameter: 62 mm, Details: co-rotating, degassing, vacuum pump, segmented screws and cylinder, opportunity for side feeder Djdpfx Ajxu Dp Nogdjcb

Year of construction: 2025, condition: new, new PMH filament line extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) Dsdpfxech Sfqo Agdjcb with puller with filament accumulator (option) with winder and traverse guide MADE in GERMANY

Condition: good (used), Year of construction: 2001, Extruding pressing line for soybean, Instapro, made in 2001, consisted of 2 extruders, 2 presses, original AMA automatic filtration for oil, and cooler for the cake. Dsdpfxsxuahbe Agdjcb Capacity is up to 1.200kg/h.

Condition: used, dr. wiesner Type: INTEGRA DDV -1...1 bar Product description: dr. wiesner Integra leak test system Dcedpfx Aowqm Ddsgdob The classic - for all common test procedures The leak test system for industrial leak-tightness and flow tests with fully graphical color display up to three independent test circuits operable 255 test programs can be stored automatic process optimization autoTune (option) communication via flexibly exchangeable bus coupling modules freely programmable fixture control freely programmable special test procedures The device is suitable for tests according to the relative and differential pressure method with overpressure. Special versions: none Technical data: Electrical supply: 110 ... 230V~; 50 ... 60Hz (connection via power cable to plug XO) pneumatic: clean and dry compressed air max. 7 bar (to connection P) Test pressure range: 0 ... 1000 mbar, electronically regulated Measuring ranges Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Electrical interfaces: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) pneumatic: Connection test object (Test) Connection reference circuit (Ref.) Enclosure Protection class: IP40 Dimensions: 450x185x380mm (WxHxD) Weight approx. 15.5kg Condition: used (Changes and errors in the technical data, information reserved!) We are happy to answer further questions by phone.

Year of construction: 2016, condition: as good as new (ex-display), Kategorie / Category: Doppelschneckenextruder / Twin-screw extruder Nummer / Number: DE27621 Hersteller / Manufacturer: KraussMaffei Berstorff Type: ZE 110 R x 28D UTmi Year of manufacture: 2016 like new, less than 100 operating hours Screw diameter / Screw diameter: 2x Ø 127,0 mm L/D: 28:1 (extension of the processing unit possible / extention of processing unit possible) Dsdpjiux Nmofx Agdjcb Antrieb / Motor: 250,0 kW (AC) - Wasser gekühl / water cooled Details: co-rotor, screw speed: max. 300 rpm, degassing, 2x Busch vacuum pumps MM 1202 A VA3, segmented screws and barrels, 1 x Berstorff ZSFE 120 side feeder - Control system: Siemens S7 with screen control The offer does not meet your expectations? Please visit our website Plama or send us your detailed inquiry, we have the right product for almost every budget.

Condition: like new (used), set, packed in wooden box, screw and barrel for 150 mm extruder, grooved feeding bush, screw with shearing and mixing element Dedpfx Aodm Aghjgdscb

Condition: excellent (used), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm3/10 min according to international standards. Temperature range: +30 - +400°С (additionally up to 500°С). In the design of the device: - Microprocessor for automatic testing, storing test conditions (25 methods), storing and saving the results of 40 tests; Dsdpfsvx Sxdox Agdocb Automatic calculation and display of temperature value and basic rheological data RS 232 and USB connection Diagnostics Automatic rotary knife for cutting extrudate Nozzle lock Loads: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions are transferred to it. The Visual MELT program is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Methods A and B. Basic model + encoder + lift for raising and lowering the load + automatic knife for cutting the extrudate, code 7026.000 Maximum force: 1200 N Stroke mm.: 220 Volt: AC 230 50 Hz Serv: Temp. (S2 60 sec) ASS.: 1.8 A Vel. max: 10 mm/sec Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2025, condition: new, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Dcodpfxoby Rfpj Agdsb Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. Dodjk Hz Nqjpfx Agdscb 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, Used Reifenhäuser extruder Dcedpfx Agsw Np Tksdjb Type: RH-241-1-50-30 WE Grooved feeding zone With manual screen changer Fully functional

Condition: used, 3DGENCE Type: Industry F420 Technical data: Working area: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Dcodownpbgspfx Agdeb Support material: soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changing system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Work chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in the technical data, specifications reserved!) We would be happy to answer further questions by phone. Written orders possible by email or fax

Condition: new, Cylinder, packed in wooden box, cylinder with ceramic heaters for 90mm extruder Djdpfxeua Ti Is Agdocb grooved feed

Year of construction: 2025, condition: new, extruder 30 mm with die-face pelletizer, the housing, made from stainless steel, is swivelling. Dcsdpfsf Uc Ugjx Agdsb the lenght of the granules is adjustable by means of the cutting speed. optionally, we offer a transport belt for cooling the granules.

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 Dcedpfowxvadex Agdeb 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor 3 zone screw 35-25d fully functional

Year of construction: 2025, condition: new, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). Dsdpfx Aeiv H Ekegdjcb This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Year of construction: 2025, condition: new, 30 mm extruder with cross-head for smallest coating object´s, with cooling bath, puller and winder with guiding device Dcodpfsf Uc Ursx Agdeb