Used Roll benders, manual for sale (48)

Condition: excellent (used), Year of construction: 2001, GEKA R 8 three-roll bending machine, 2040 x 1.0 mm, used - Three-roll, asymmetrically mounted, made of high-strength steel - Side stand with solid welded construction - Quick rear roll adjustment - Crowned rollers to compensate for deflection - Bending length 2040 mm - Weight approx. 300 kg - Year of manufacture 2001 Cgsb Hn Newhf T Se Syst Location: arriving at warehouse 54634 Bitburg - Available at short notice

Condition: excellent (used), Technical specifications: Working width: 2050 mm Max. bending capacity for mild steel St40: 6.0 mm Max. pre-bending for mild steel St40: 4.0 mm Top roller diameter: 170 mm Side lower roller diameter: 170 mm Middle lower roller diameter: 145 mm Cone bending device Hardened rollers Working height: 800 mm Mobile control panel Hydraulic folding bearings Cgeb Hn Nowdwiqo Syet CE mark Motor power: 2.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Weight: approx. 3 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, KR is a series of manual round bending machines for repair and one-off production. With an astonishingly high bending capacity, this machine can be used to shape sheet metal with strength and feeling. The machine with hardened rollers can bend conically and is a robust supplementary machine for metal workshops. Cob Hnsn Hthbo N Syegt

Condition: new, Year of construction: 2024, neu 2024 9743 prompt, Zwischenverkauf v Türkei 7800 € 161.46 € 1 1 1050 mm 3 mm 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg Cgob Hsulbbdon N Syet 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll hardened rolls tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN

Condition: excellent (used), Year of construction: 1976, Reinforcing steel bending machine, shaft bending machine, round steel bending machine Csb Hn N Sslk R Dnsyegt -Condition: Machine is in very good condition (was only used for training) -max. bending capacity: Ø 32 mm -Drive: 1.3/2.1 kW -Bending angle: pin controlled, two-speed, each with pins for left/right to adjust the angle -Equipment: adjustable counterholder bars standard bending tool -Dimensions: 750/660/H970 mm -Weight: 356 kg

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m Cgjb Heu Icdyen N Syjt weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm *

Condition: good (used), manufacturer: FASTI 1020X1 max plate width: 1020mm Ceb Hnsra A Hgo N Syogt max plate thickness: 1 mm roller diameter: 50mm The upper cylinder can be removed for easy workpiece removal machine dimensions: length: 130 cm core: 100cm width: 50cm weight: 240 kg

Condition: good (used), Year of construction: 1996, Technical specifications: Working length: 3100 mm Max. bending capacity: 12.0 mm Pre-bending: 8.0 mm Top roller diameter: 250 mm Bottom roller diameter: 230 mm Hydraulic folding bearing Cjb Hswbv Efen N Syegt Conical bending device Extended rollers for profile bending Control panel with digital display Motor power: 7.5 kW Dimensions (length x width x height): approx. 4300 x 1750 x 1350 mm Weight: approx. 6 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, KR is a series of manual round bending machines for repair and one-off production. With an astonishingly high bending capacity, this machine can be used to shape sheet metal with strength and feeling. The machine with hardened rollers can bend conically and is a robust supplementary machine for metal workshops. Cob Hnov Iaz Ss N Syogt

Condition: new, Year of construction: 2024, neu 2024 Cgobeuhd Dlo Hn N Syet 9722 prompt, Zwischenverkauf v Türkei 18000 € 369 € 1 2050 mm 3 mm 130 mm 3,5 m/min 2.2 kW 3200 mm 750 mm 1000 mm 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN OPTIONS: (time of delivery with options approx. 8 weeks) Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,-

Condition: good (used), Year of construction: 2012, From liquidation: Cgob Hn N Setu N Ibsyet Metallkraft RBM 1030-10 Year of manufacture 2012 Bending capacity S 235JR: max. 1.0 mm Bending capacity VA: max. 0.75 mm * Bending capacity aluminum: max. 1.2 mm Roll diameter: 56 mm Bending diameter: min. 84 mm Wire insert grooves: Ø 6 / 8 / 10 mm Dimensions (LxWxH): 1400 x 700 x 1120 mm Weight: approx. 185 kg

Condition: used, Year of construction: 1960, Technical details: sheet width: 2000 mm plate thickness: 4 mm distance between columns: 2070 mm roll dia. top roll: Ø142 (getrieben) mm diameter of lower rolls: 1. Walze Ø 145 (getrieben) mm diameter of lower rolls: 2. Walze Ø 145 (mitlaufend) mm adjustment of lower rolls: manual/mech./hydr.: 1. Walze ca. 20 mm von Hand adjustment of lower rolls: manual/mech./hydr.: 2. Walze ca. 180 mm von Hand height over floor: 950 mm total power requirement: ca. 4,0 kW dimension machine xH: 3,0 x 1,0 x 1,2 m weight of the machine ca.: ca. 2,5 t Mechanical 3-roll plate bending machine Cjbou Icfwo Hn N Syegt Operation: Hand switch / foot switch forward/backward 2x EMERGENCY button *

Condition: new, bending length: 1250sheet thickness: 3upper roll diameter: 90 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 314,-- - Hardened rolls EURO 550,-- - Variable speed of rotation  We have many references! Csb Hed Ab Tyon N Syogt

Condition: good (used), working width: 1040 mm Cob Hn Njdt Dqws Syogt metal sheet thickness: 1,25 mm upper roller-Ø: 56 mm below roller-Ø: 56 mm weight: 190 kg space needed: 1450 x 460 x 1030 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 7200 € 149.04 € 1550 mm 2 mm 90 mm 6 m/min 1.5 kW Cjb Hnsuhd Dfj N Syogt 2130 mm 700 mm 1200 mm 545 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH OPTIONS: powered back roll EUR 1.000,- digital readout EUR 1.100,-

Condition: used, working width: 1020 mm metal sheet thickness: 1 mm Coboda I Its Hn N Syjgt upper roller-Ø: 55 mm below roller-Ø: 55 mm space needed: 1370 x 570 x 1100 mm

Condition: new, Year of construction: 2024, neu 2024 9739 prompt, Zwischenverkauf v Türkei 22300 € 457.15 € 1 1 2030 mm 6 mm 6 mm 5 mm 170 mm 4 kW 3600 mm 1020 mm 1120 mm 2400 kg Cjbevnv R Ae Hn N Syegt 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Year of construction: 1996, Condition: as good as new (ex-display), machine/vehicle number: 910/96/221, working width: 1030 mm metal sheet thickness: 1 mm Ceb Hn Nsb N Eu Ie Syegt upper roller-Ø: 60 mm below roller-Ø: 60 mm weight: 170 kg space needed: 560 x 1570 x 1080 mm

Condition: new, Year of construction: 2024, neu 2024 9738 prompt, Zwischenverkauf v Türkei 20300 € 416.15 € 1 Cgjb Hn N Ssvnv Rvoyjt 1530 mm 6 mm 6 mm 4 mm 150 mm 4 kW 3100 mm 1120 mm 1020 mm 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Year of construction: 1996, Condition: as good as new (ex-display), machine/vehicle number: 910/96/221, working width: 1030 mm metal sheet thickness: 1 mm upper roller-Ø: 60 mm below roller-Ø: 60 mm Cob Hn N Ssbpytpoyogt weight: 170 kg space needed: 560 x 1570 x 1080 mm

Condition: new, Year of construction: 2024, neu Cgjboulba Ts Hn N Syst 2024 9741 prompt, Zwischenverkauf v Türkei 6800 € 140.76 € 1 1050 mm 3 mm 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5300 € 109.71 € 1050 mm 3 mm 2 mm 90 mm 2080 mm 700 mm 1250 mm 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll Cgsb Hn N Seuhdiusyjt tiltable upper roll conical rolling device user manual in GERMAN

Condition: new, Year of construction: 2023, neu 2023 9655 prompt, Zwischenverkauf v Türkei 2400 € Csb Hsuhcuvon N Sysgt 1 1 1050 mm 1 mm 56 mm 1400 mm 700 mm 1120 mm 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 15000 € 307.5 € 1550 mm 4 mm 140 mm 3,5 m/min 2.2 kW 2700 mm 750 mm 1000 mm Cgob Hn Nsuhct Eo Syst 1420 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.500,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,-

Condition: used, Year of construction: 2021, gebraucht 2021 9502 Türkei 2100 € 1 1050 mm 2 mm 75 mm 1930 mm 700 mm 1160 mm 300 kg Cgobeuhdu Ro Hn N Syot MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH