Used Bending Roller for sale (11,530)

Condition: used, Year of construction: 2018, functionality: fully functional, roll width: 500 mm, total width: 850 mm, total height: 160 mm, total length: 2,000 mm, Manufacturer: Heber Year of manufacture: 2018 Overall dimensions (L x W x H) in mm: 2,000 x 850 x 160 Width including side rail in mm: 600 Side rail height in mm: 140 Conveyor width in mm: 500 Conveyor height in mm: 150 Curve (degrees): 90 Curve radius, inner in mm: 800 Curve radius, outer in mm: 1,200 Crodpfx Akjzd A Uvotei Direction of travel: possible in both directions Support roller shaft type: steel, internal thread Support roller diameter: 50–80 mm Support rollers per shaft: 1 Support roller material: steel – plastic-coated Roller pitch, internal (mm): 70 Roller pitch, external (mm): 120 Drive: motorised roller Motor manufacturer: Interroll Motor specifications: 24 VDC / EC310 Conveyor speed in m/s: 0.6 Net weight in kg: 60 Special features: one drive roller Condition: used / fully functional Functional test: OK

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Csdpfxezka H Aj Aktjri

Year of construction: 1981, condition: ready for operation (used), Working width: 3500mm, max. sheet thickness for roll bending: 65mm, max. sheet thickness for folding: 55mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine designed for interchangeable upper rollers up to a minimum diameter of 450mm, machine overhaul in 2009, factory inspection in 2012. Crjdpfjnvfdbjx Aktji

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Csdoyttv Repfx Akteri

Year of construction: 1986, condition: ready for operation (used), Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024. Cedpsq A Un Sefx Aktjri

Condition: new, 3-Roll Round Bending Machine ORM 2070 x 140 Technical Specifications: Special equipment included in the price: motorized adjustment of the bottom rollers hardened rollers motorized adjustment of the rear rollers digital display Sheet metal width 2070 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness 4.0 mm for pre-bending Roller length 2070 mm Roller diameter 140 mm Weight 1730 kg Dimensions L-W-H 3230 x 880 x 1100 mm Motor: 2.2 KW Equipment: Top and bottom rollers, electrically driven Top roller can be swiveled out Taper bending device Crodofig Apopfx Aktei asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable CE marking

Condition: used, Year of construction: 2007, functionality: fully functional, roll diameter: 80 mm, roll width: 620 mm, roll pitch: 70 mm, total width: 680 mm, total height: 120 mm, total length: 2,170 mm, construction width: 680 mm, construction height: 120 mm, Manufacturer: TGW Year of manufacture: 2004 Overall dimensions: approx. 2,170 x 680 x 120 mm (LxWxH) Width including side panel: 680 mm Side panel height: 120 mm Width including drive unit: 680 mm Conveyor width: 620 mm Curve (degrees): 90° Curve radius, inner: 800 mm Codpfezpabdjx Aktjri Curve radius, outer: 1,480 mm Roller type: Steel with plastic coating / conical Rollers per axle: 1 Roller length: 620 mm Roller pitch, inner: 70 mm Roller pitch, outer: 110 mm Roller diameter: inner: 50 mm, outer: 80 mm Drive type: Gravity Motor: None Direction of travel: Left/right Functional test: OK Condition: Second-hand / fully functional

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, Brand : Luna Type : 8835 18/05 Year of construction: 2004 Capacity : 1890x0.5 (250 N/mm2) Mains voltage : 3x400V / 3x230V Roll diameter : Ø 35 mm Motors : 0.75 kW max. working speed : 7.1 m/min Machine weight : 900 kg Art.no. : 6812 Codpfx Ash Ngd Roktsri Complete, well-functioning CNC plate roller for rolling thin material up to 0.5 mm plate (250 N/mm2). Especially suitable for rolling aluminum sheet. Previously used for rolling lampshades. Machine description Luna: “The 8835 is a roll bending machine for the production of small radius louvres and reflectors to meet the demands of the latest small diameter light tubes. The machine is designed with three independant bottom rolls to reduce prodcution time to a minimum. All rolls run in adjustable support bearings to permit easy roll adjustment for materials of different hardness and thickness. The top roll crowning is carried out by means of a crossbeam, which tilts to make room for the bent part. All rolls are hardened and chromium-plated with polished surfaces to avoid marking. The control system allows the programming of constant radius parts as well as parabolic shapes. 100 programs can be stored. ” Full documentation available: - Operating manual (in English) - Electrical Schematics

Condition: good (used), Here are the official specifications of your *BPR CP30* – 30mm spindle: Cjdszwg Rzjpfx Aktori It is a small but very versatile machine. Capabilities for mild steel: *Manufacturer's data for BPR / Eagle CP30:* - *Flat bar to flat bar:* 80 x 15 mm max - *Flat bar on edge:* 50 x 10 mm (to be verified, but standard on CP30) - *Round tube:* 60.3 mm x 2 mm (2-3/8" x .062") - *Square tube:* 38 mm x 3 mm (1-1/2" x .120") - *Round solid bar:* 30 mm max - *Square solid bar:* 30 mm also - *Gas pipe / Pipe:* 1"1/2 Sch 40, i.e. 48.3 mm - *U-channel:* 50 x 25 x 5 mm - *Angle iron:* 40 x 40 x 5 mm (external) / 35 x 35 x 5 mm (internal) d019775a *Technical specifications:* - Spindle diameter: 30 mm - 2 drive rollers (the lower 2) - Bending speed: 8.5 m/min - US speed: 12 feet/min - Weight: 210-247 kg depending on version (yours is 187 kg on the plate = older, lighter version) d019 In short, it is perfect for standard locksmithing/metalworking.

Condition: used, Year of construction: 2023, functionality: fully functional, total width: 870 mm, total length: 2,040 mm, frame height: 130 mm, frame width: 30 mm, Curve/Conveyor Curve/Rollers 70 degrees Vanderlande with drive Year of manufacture: 2023 Manufacturer: Vanderlande Model/Type: Rollers, 70-degree curve Condition: used (like new) Overall outside length: approx. 2040 mm Overall inside length: approx. 1120 mm Overall width: approx. 870 mm Conveyor width/roller width: approx. 740 mm Roller spacing/axle spacing: approx. 100/50 mm Curve consists of 22 rollers Roller manufacturer: Interroll Frame made of steel Frame height: approx. 130 mm Frame width: approx. 30 mm Including SEW motor 0.75 kW Stock quantity: 12 pieces Price per piece The conveyor system was in operation until it was dismantled. Offers will only be provided upon presentation of a valid imprint; sales are only to business customers. Internal article number: 2026071904 Thanks to the excellent workmanship of the conveyor system, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics Crodpfjzmqh Nox Aktoi For roller conveyors, belt conveyors, inclined conveyors, or telescopic devices for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking shelves or containers. Features: Condition: fully functional, with signs of use Ideal for rapid material transport Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine Cjdpfx Akecx T E Rotsri -Spare part top roller -Drawing with the pictures -Max. Sheet width: 2060 mm -Max. Sheet thickness: mm -Roller diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 325100, number of rollers: 3, shaft diameter: 100 mm, pipe diameter (max.): 120 mm, overall weight: 3,000 kg, Equipment: documentation/manual, emergency stop, I am offering for sale a profile bending machine, purchased new in 1990, manufactured by COMAC, type 3025 HV, with standard configuration including vertically arranged bending axes. It is in fully operational condition and can be demonstrated under power after prior arrangement. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Crodpfxj Af Utas Aktoi Maintenance & Condition: The machine is in excellent condition. In 2023 and 2025, it underwent extensive repair and overhaul work at a specialized workshop. The total investment volume for both measures amounted to approximately €50,000 net. Documentation & Evidence: The entire maintenance history is completely documented. Detailed evidence of the individual items, as well as all original invoices, is available and can be provided upon request. Original manual available. Enormous added value: Extensive tool and profile package included! To be able to serve customer orders in an even more flexible and individualized manner, significant investments were made in expanding the tool range. In addition to the standard tools, you will receive: a seven-page detailed list of all tools, including photos. • Tools for various round tubes Ø (57 + 60.3 + 70 + 76.1 steel + 76.1 plastic, + 80 + 88.9 + 101.6 + 108 + 114.3 + 120) mm. • Special tool for flat profiles, light axis up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for angle iron • Tools for special profiles Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documentation. Subject to prior sale. If you have any questions or require further information, please send us a message or call us.

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Codoglaq Ijpfx Aktori Total weight of all rollers: 57 kg. Good condition.

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Outer diameter: 200 mm -for: 35 mm pipe -Bearing seat: Ø 55 mm -Bore: Ø 49 mm -Quantity: 2 rolls available Price: complete -Dimensions: Ø 200 x 81 mm Cedpfx Ajd Naw Ajktsri -Weight: 11 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 25498, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 260 mm, working width: 2,070 mm, sheet thickness (max.): 25 mm, TECHNICAL DETAILS Sheet width: 2,070 mm Sheet thickness: 25 mm Bending capacity: 18 mm Top roller diameter: 320 mm Side roller diameter: 260 mm Lower roller diameter: 320 mm MACHINE DETAILS Total power supply: 26 kW Dimensions & Weight Space requirement: approx. 4,700 x 2,000 x 2,200 mm Credoygw Ikepfx Aktsi Machine weight: approx. 8,100 kg EQUIPMENT Hydraulic lateral roller adjustment Conical bending device 2 driven rollers Hardened rollers Hydraulic drop-end bearing Mobile control panel Foot switch Safety device CE marking

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm Cedpfx Akjwk Rlxstjri weight: 240kg

Condition: used, functionality: fully functional, Year of construction: 2018, CNC PIPE BENDING MACHINE, year 2018 Made in China Excellent condition, rarely used Codpfx Ake Ahx Rvotori Liye DW 63 CNC x 2 AS CNC pipe bending machine – a hydraulic, fully automatic machine designed for precise bending of metal pipes. It provides high repeatability and is used in various industries, such as furniture manufacturing, automotive, and construction. Key technical parameters: • Model: DW 63 CNC x 2 AS • Manufacturer: Zhangjiagang Liye Machinery Co., Ltd • Power supply: 380V, 50Hz • Bending capacity (maximum diameter x wall thickness): Ø63 x 2 mm • Automation: Full (CNC) • Control: Bending axis driven by a hydraulic cylinder, feed (X) and rotation (Z) axes driven by servomotors, ensuring high precision. • Materials: Capable of bending steel, stainless steel, aluminum, brass, and copper. • Additional features: Interactive touch screen, programmable springback compensation, automatic mandrel lubrication (optional) • Condition: Used, functional

Condition: used, 3-roller bender Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Crodpfx Aksuluhwotei Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, overall weight: 6,300 kg, roller diameter: 250 mm, working length: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending length: approx. 3,100 mm Roller diameter: approx. 250 mm Cjdpfj Ahg T Hex Aktjri MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 1,800 mm Total weight: 6,300 kg

Condition: new, Year of construction: 2026, control type: manual, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, overall weight: 1,000 kg, total length: 4,200 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, Highly precise press brake for steel, copper, zinc, and aluminum sheets. These press brakes and all common spare parts are available ex stock. Credpsb Hxzyjfx Aktsi Maximum working length of the press brake: 4200 mm Bending capacity: up to 0.8 mm (steel sheet) Titanium-zinc sheet: 0.8 mm, aluminum sheet: 1.0 mm, copper sheet: 1.0 mm Bending angle of the bending machine: max. 160 degrees Cutting with the roller shear across the entire working width Bending ram thickness: 20 mm Cutting with the roller shear across the entire working width Raising of the upper beam in three positions Upper ram stroke: 80 mm Degree scale Weight of the press brake: approx. 810 kg Cutout 60 mm / 45° Roller shear 0.8 mm, additional cost: 350 Euro Manual folding machine, additional cost: 75 Euro Delivery costs: 500 Euro to Germany and Austria Delivery date: every week, Monday/Tuesday Payment upon delivery or prepayment Invoice will be issued with 0% VAT. Your VAT identification number is required for this.

Condition: excellent (used), Year of construction: 2017, Technical specifications: 2 rollers hydraulically adjustable 3 rollers driven Shaft diameter: 80 mm Lateral, hydraulically controlled arm correctors on the left and right CE marking Bending capacity, square bar: 60 x 60 x 3 mm Credpfx Akj Afby Dotoi Bending capacity, flat bar: 100 x 20 mm Bending capacity, tube: 88.9 x 4 mm Bending capacity, angle: 70 x 70 x 8 mm Round bar: 40 mm Motor power: 4.75 kW Control panel with digital display Dimensions (length x width x height): approx. 1650 x 1450 x 1550 mm Weight: approx. 1.6 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, roll diameter: 75 mm, total width: 1,000 mm, conveying length: 3,500 mm, Roller track 1000x3525mm roller line, transport track several pieces /ct1967 Manufacturer: BUDDE Fördertechnik Length: 3525 mm Width: 1000 mm Csdpoubahgjfx Aktsri Height: 250 mm Roller: 990 mm Wheel center distance: 75 mm Can be sorted, several pieces for sale

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² - Year of manufacture: 1989 Credpfx Aeylyh Doktoi Technical Data - Max. sheet width: 3500 mm - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: new, Year of construction: 2026, working width: 4,200 mm, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, sheet thickness copper (max.): 1 mm, back gauge: 1,320 mm, overall weight: 1,000 kg, total length: 4,500 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, foot remote control, Electric press brake RED-4200/0.8/150* with foot pedal and backstop. New electric precision sheet metal bending machine for 0.8 mm steel and 1 mm aluminum sheets. The main features of this sheet metal processing machine are its efficiency and precision. The bending machine enables bending operations with a maximum angle of 150 degrees. Electric control: A user-friendly control panel increases ease of use and the precision of repeatable bends. Roller shear: Enables cutting across the entire working width. Robust construction: The 18 mm thick bending beam ensures durability, while the 80 mm opening and the three-stage stroke adjustment of the upper beam facilitate material positioning. Machine equipment: electric control: upper and lower beam Foot pedal for control Electric backstop up to 1320 mm Crodoc I T Rxjpfx Aktji Control panel Additional equipment: Roller shear up to 1 mm steel sheet / 1.5 mm aluminum - 500 euros Manual folding machine - 100 euros Magnetic alignment aid, 2 pcs, 36 cm - 100 euros Shipping throughout Germany: 500 euros Invoice will be issued without VAT as an intra-community supply.

Condition: new, Year of construction: 2026, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, overall weight: 400 kg, total length: 3,440 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, The highest precision of this press brake guarantees and enables the bending of sheet steel up to 0.8mm and for all non-ferrous metals 30% more bending capacity. The Prod-Masz press brakes are characterized by high quality, robustness, optimal functionality and beautiful design! Only high-quality materials are used in the production of the folding bench. Folding machine 3.14m/0.8mm Technical specifications: - maximum working width: 3140 mm - Bending performance: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - Bending beam thickness: 24 mm Crsdpeb Hqa Nsfx Aktoi - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Passage opening: 80 mm - degree scale - angle stop - Front and depth stops - Weight: about 400 kg - The cutter (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. Price: €2050.00 The delivery costs are: PLEASE ASK Cash on delivery and bank transfer in advance Delivery within 1 week from order date We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.