CNC Bending Roller
Luna 8835 18/05

Name: Luna 8835 18/05
Brand: Luna
Price: 8500 EUR
Availability: InStock

EXW fixed price plus VAT

€8,500

Year of construction

2004

Condition

Used

Location

Staphorst

Show map

Machine data

Machine type:: CNC Bending Roller

Manufacturer:: Luna

Model:: 8835 18/05

Year of construction:: 2004

Condition:: excellent (used)

Price & Location

EXW fixed price plus VAT

€8,500

Location:: Achthoevenweg 16a, 7951 SK Staphorst, Nederland

Call

Details about the offer

Listing ID:: A7181436

Update:: 01.10.2024

Description

Brand : Luna
Type : 8835 18/05
Year of construction: 2004
Capacity : 1890x0.5 (250 N/mm2)
Mains voltage : 3x400V / 3x230V
Roll diameter : Ø 35 mm
Motors : 0.75 kW
max. working speed : 7.1 m/min
Machine weight : 900 kg
Art.no. : 6812

Complete, well-functioning CNC plate roller for rolling thin material up to 0.5 mm plate (250 N/mm2).

Especially suitable for rolling aluminum sheet.

Previously used for rolling lampshades.

Machine description Luna:

“The 8835 is a roll bending machine for the production of small radius louvres and reflectors to meet the demands of the latest small diameter light tubes.

The machine is designed with three independant bottom rolls to reduce prodcution time to a minimum. All rolls run in adjustable support bearings to permit easy roll adjustment for materials of different hardness and thickness. The top roll crowning is carried out by means of a crossbeam, which tilts to make room for the bent part.

Hnjdpfx Aeh Ngd Rsbreh
All rolls are hardened and chromium-plated with polished surfaces to avoid marking. The control system allows the programming of constant radius parts as well as parabolic shapes. 100 programs can be stored. ”

Full documentation available:

- Operating manual (in English)
- Electrical Schematics

Seller

Registered since: 2015

9 listings online

Call

Send inquiry

Telephone & Fax

+31 6 550... show

These listings may also fit your interest.

Listing

Babberich

7,577 km

Trimming Bearding machine
OMERAR4 / 12

Call

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Hnedpokvnumjfx Abreh Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

SPECIAL OFFER guillotine shears Durma MS 2504

Staufenberg

7,804 km

SPECIAL OFFER guillotine shears
DurmaMS 2504

Call

Year of construction: 2024, condition: new, Make: DURMA Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Hnedpfx Absd R Er Dsrjh Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

See details

Listing

Hövelhof

7,729 km

Hydraulic press
HYDRAPHKPS8000

€3,950

fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 1975, -KOM 1002-   Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000  Hodpfx Ajg Ufvbsbrjnh Year of manufacture: 1975  effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V  Perm. load: 80000N  Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

See details

Listing

CNC vertical machining center MIKRON VCP 600

Root

8,011 km

CNC vertical machining center
MIKRONVCP 600

Call

Listing

Jelah

8,760 km

PRESSBRAKES
BAYKALAPH 3100/10

Call

Listing

Gräfenthal

7,963 km

Single side decoiler
BBTABH 2000

Call

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Hnjdpfxog U Utve Abrsh Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

See details

Listing

Concordia Sagittaria

8,373 km

360° Slewing Cantilever Crane
AXA0135

Call

Condition: new, AXA 360° swivel cantilever crane Max capacity : Kg 500. Max height : mm 2804. Max overhang : mm 1360. Easily maneuverable due to 360° rotation and high load capacity pivoting wheels with bumper supports and parking brakes. Due to the frontal footprint of only 995mm, it can be used in aisles and confined spaces. The lifting arm is extendable in 4 different positions. Hodjgypgdepfx Abronh

See details

Listing

Großbottwar

7,943 km

Shrinking machine
SMIPackBP800

Call

Condition: used, Year of construction: 2021, functionality: fully functional, The BP 800 is an automatic bundle packer. Products up to 760 mm wide and 380 mm high can be packed. - Semi-automatic bundle packer - Pneumatic piston - Swiveling PLC display - Adjustable air flow in tunnel - Transport rods made of heat-resistant fiberglass - LD-PE film 25 – 80 µm - Low energy consumption - Complies with EU standards Technical specifications Power supply: 380 V Output per minute: 10 bundles Usable sealing bar: 760 mm Maximum product height: 380 mm Maximum film roll width: 750 mm flat film Compressed air: 6 bar Working height: 945 - 1105 mm Machine dimensions: 2665 x 1410 x 2105 mm Weight: 605 kg Hedpfx Aowth Dqjbrenh Download data sheet

See details

Listing

Ahaus

7,617 km

Plate Shear - Mechanical
RAS52.31

Call

Condition: used, sheet width 3100 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 36 Hub/min cutting angle 0.9 Grad table height 800 mm table width 430 mm distance between columns 3200 mm back stop - adjustable 5.0 - 750 mm Control konv. engine output 3.0 kW weight of the machine ca. 1950 kg range L-W-H 3730 x 2070 x 1400 mm Original price approx. 45.000 euros (!!) Special price on request Features: - Robust / motorized swing-cut guillotine shears Hnsdpfx Aoxcyw Ejbrjh - Machine with manual material/backgauge * Travel range 5.0 – 750 mm stop depth * Analog position display * Manual adjustment from the front - Break-proof, torsion-free steel welded construction - Compact and clear machine design - 1x hold-down beam * Hold-down opens before the knife beam moves up * No kinking of very sensitive sheets - Manual cutting gap adjustment - Integrated sheet metal holding system for thin sheet metal cuts - Sheet metal/cut material removal at the front (operator side) - 1x side stop with mm scale - 3x table extensions - 1x freely movable foot switch - Operating instructions (PDF

See details

Listing

Częstochowa

8,372 km

Industrial robot
TIG-OTCNH52-NEFC

Call

Condition: excellent (used), Year of construction: 2017, Cell with TIG-OTC-NH52-NEFC welding robotCountry of origin of the cell: Italy Hnedpfx Abom Uyhhjreh Year of manufacture: 2017 Country of origin of the robot: Japan Brand: OTC NH5 Year of manufacture: 2016 Number of axes: 6 Reach: 866 mm Load capacity: 5 kg Control: OTC FD 11 Source: OTC DA 300-P Cell dimensions: Length 3500 mm 1900 width mm Height 2400 mm

See details

Advertise here

CNC Bending RollerLuna 8835 18/05

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

CNC Bending Roller
Luna 8835 18/05