Used punch presses with 0-35t punching force for sale (148)

Condition: used, Pressing force: 300 kN Stroke: 610 mm Quick-change device Support table with stop and folding cam Range of tools is included in the price Weight: 1,300 kg Bsdpfxjzyalqe Afxswt

Condition: used, Punching Bracket, Punching Unit SUPRA-CLAP Type C12.300 Throat Depth: 300 mm Punching Capacity: 0.3 to 2 mm material thickness, depending on cutting clearance Hole Diameter: Ø 2 to Ø 12 mm Distance between lower die and punch holder: 8.5 mm Distance between upper and lower bracket: 13 mm Punch Shank Diameter: Ø 12 mm Cutting Plate Outer Diameter: Ø 30 mm Cutting Plate Thickness: 12 mm Drop-through Opening in Punching Bracket: 14.5 mm Installation Height: approx. 145 mm - Standard punch length 70 mm with 60° head (Punch per DIN 9861 Form C) - Punch holder with spring stripper and return spring - Mounting slot 50 x 13.5 mm and 8 mm locating pin Punching Bracket Dimensions (L x W x H): 390 x 36 x 145 mm Bwsdpexbh Rdefx Afxet Weight: 4 kg Good condition 9 units available, price per unit 3 units with tool inserts (punch + die) 6 units without tool inserts (without punch + without die)

Condition: used, Punching bracket, punching unit SUPRA-CLAP / CEWE Type PAE 50 - 400 3GN 3P1 Throat depth: 400 mm Punching capacity: max. 10 mm material thickness Hole diameter: max. Ø 50 mm Distance between upper and lower bracket: 19 mm Punch holder: Ø 78 mm Cutting plate outer diameter: Ø 78 mm Cutting plate thickness: 20 mm Drop-out opening in punching bracket: 52 mm Installation height: approx. 220 mm - Punch holder as a punch unit with punch mount and material stripper with disc springs - Punch holder rotation-proof guided and spring-loaded Bsdpfx Afexbh N Texjwt - Punch length 97 mm, shank Ø 35 / 50 mm - Round hole tool: punch Ø 41 mm and die Ø 41.5 mm - Long fixing hole: 270 x 13.5 mm Dimensions of punching bracket (L x W x H): 550 x 95 x 220 mm Weight: 27.5 kg Good condition 4 units available, price per unit 3 units with Ø 41 mm punch tool 1 unit with Ø 43 mm punch tool

Condition: used, Punching bracket, punching unit SUPRA-CLAP type C7 300 Throat depth: 300 mm Punching capacity: max. 2 mm material thickness Hole diameter: Ø 2 to Ø 7 mm Distance between lower die and punch holder: 7 mm Distance between upper and lower bracket: 12 mm Punch shank: Ø 7 mm Bodpfx Afexbh N Hexowt Die outer diameter: Ø 20 mm Die thickness: 12 mm Pass-through opening in punching bracket: 11 mm Installation height: 142 mm - Standard punch length 70 mm with 60° head - Equipped with a round hole punch approx. Ø3 to 4 mm - Punch holder with stripping spring and return spring - Mounting slot 50 x 14 mm and 8 mm locating pin Dimensions punching bracket L x W x H: 390 x 26 x 145 mm Weight: 3.7 kg Good condition 13 pieces available, price per piece

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm Bwodpfxov N Hrto Afxst or 20 in 12 mm Throat 210 mm Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg • Mechanical foot release via cable pull • Hand finder • Adjustable hold-down device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2011, MODEL AMADA TOGU EU PRESCISION TOOL GRINDING MACHINE WHEEL CBN 150 MAX TOOL DIAMETER 160 Bedpozx Sixefx Afxowt MAX GRINDING DEPTH ,ONE CYCLE, 0.99 SPINDLE MOTOR 1.5KW SPINDLE MOTOR SPEED 3000 RPM VERTICAL TRAVERSE 200 MACHINE WEIGT 470 KGS PWOER CONSUMPTION 4.8 KVA

Condition: used, throat 750 mm punch diameter max. 75 mm max. sheet metal thickness 4 mm weight of the machine ca. 250 kg dimensions of machine L x W x H 1,41 x 0,75 x 1,47 m max. punch cap. in steel ø 75 in 2,0 mm, in aluminium ø 75 in 3,2 mm resp. ø 55 in 4,0 mm Bodpjtqqp Sefx Afxewt

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 25,379 h, For sale: professional CNC punching machine TRUMPF TruPunch 3000, manufactured in 2014. The machine is in very good technical and visual condition. The total operating time is only about 25,379 operating hours, which is a low number of operating hours for industrial TRUMPF machines of this age. The machine is sold together with punching tools. Currently, the unit is fully connected to the power supply, so before purchasing, you can inspect the machine in operation, check its functionality, and perform a test punching operation. Bsdpfx Afozxxhnexswt Key information: Manufacturer: TRUMPF Model: TruPunch 3000 Year of manufacture: 2014 Type: Electric CNC punching machine Working table: 3000 x 1500 mm Capacity: 18T Operating time: ~25,379 operating hours Comes with punching tools If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Unloading 1000mm Bwjdpezulx Eefx Afxot Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Condition: like new (used), functionality: fully functional, Hydraulic punching machine Brand: Boschert Model: Ecco Line EL 500 Digital Features: Punching force: 28 t Work table dimensions (width x length): 500 x 1000 mm Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Maximum number of strokes: 180 strokes/min Switch-on value: 5 kW Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 tool drawers Foot pedal Includes all the accessories shown in the pictures. Bwjdpfxjrn Swks Afxst

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Bsdpfxszxzago Afxowt Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: excellent (used), Year of construction: 2009, Punching machine Boschert EL500 Quick tool change system TRUMPF up to tool size III = diameter 105 mm Punching force: 280 kN (28 tons) Punching arm overhang 560 mm Side stop 1000 mm right/left Stroke 40 mm Total weight 2700 kg including tool cabinet with tools and accessories Bsdpfx Asid I Hhsfxjwt completely overhauled

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die, slot die, punch and die set slot die Bwsdpfszr Exgjx Afxot -Die cutting set: punch and die set, slotted die -Size: 18.0x40.0 mm -Matrix: 18.7x40.7 mm -Transport dimensions: Ø 90 x 80 mm -Weight: 2.1 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die, slot die, punch and die set slot die Bwsdpfx Afozr Ewvexot -Die cutting set: punch and die set, slotted die -Size: 20.0x40.0 mm -Matrix: 20.7x40.7 mm -Transport dimensions: Ø 90 x 80 mm -Weight: 2.1 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die, slot die, punch and die set slot die -Die cutting set: punch and die set, slotted die -Size: 13.0x40.0 mm -Matrix: 13.7x40.7 mm Bwjdpfozr Eprex Afxst -Quantity: 2x punching tools available -Price: per piece -Transport dimensions: Ø 90 x 80 mm -Weight: 2.1 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die Bwsdpfezr Ek Njx Afxjt -Die: Punch and die Ø 46 mm / 1 13/16" -Transport dimensions: Ø 90 x 80 mm -Weight: 2.2 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Die cutting punch: Punch and die Ø 45 mm -Transport dimensions: Ø 90 x 80 mm Bwodozr Ek Ajpfx Afxot -Weight: 2.2 kg

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. Features: - Electro-hydraulic punch press with long reach - Material/sheet metal scraper - Very large material support table (!) * with adjustable depth stops - Continuously variable stroke adjustment - Freely movable foot switch, including protective cover - Side storage shelf Bjdpfx Afsznng Sjxowt - Assortment of punches and dies - Original operating instructions

Condition: good (used), Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate -Manufacturer: Mubea, cutting plate shearing tool for square steel / round steel -Item No.: Square steel: 27x27 mm / 50x50 mm -Round steel: Ø 31/56 mm -Number: 2x shearing tools available Bodpfxjznadvj Afxswt -Price: per piece -Dimensions: 185/185/H40 mm -Weight: 8.8 kg/pc.

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, counter blade only, without notching unit Bwjdpfx Aozm Tmnsfxot -Hole spacing: 200/150 x Ø 18 mm -Dimensions: 255/200/H100 mm -Weight: 14 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, notching unit -Dimensions: see photos -Dimensions: 150/130/H80 mm -Weight: 4.4 kg Bwjdpjzm Tkgsfx Afxot

Condition: good (used), Year of construction: 2002, LVD work height max. 900 mm ALPHA 1012 Control CADMAN CNC punching pressure 16 t plate thickness 8 mm plate length 1250 mm plate width 1000 mm total power requirement 13 kW weight of the machine ca. 8,3 t dimensions of the machine ca. 3600 x 2300 x 2000 mm Bwsdsyx Itcopfx Afxjt

Condition: ready for operation (used), Year of construction: 2007, operating hours: 52,506 h, punching force: 18 t, sheet thickness (max.): 6 mm, This 5-axis TRUMPF TRUPUNCH 3000 was manufactured in 2007. It features a maximum cutting force of 180 kN, making it suitable for various punching applications. The machine has undergone major contract maintenance in February 2026, ensuring its operational reliability. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUPUNCH 3000 CNC punch press we have for sale. Contact us for further details. Bwsdpezmghlefx Afxot - Operating Hours (NC): 52,506 hours (as of 09.02.2026)- Max. Cutting Force: 180 kN- Voltage: 400 V- Frequency: 50 Hz- Connected Load / Capacity: 18 kVA- Control Voltage: 24 V=- Required Fuse Protection: 3x 35 A- Compressed Air Connection: 7-14 bar- Software Version: 3.1.0- Backlash X-Axis: 0.03 mm- Backlash Y-Axis: 0.01 mm- Backlash C1-Axis: 0.01 mm- Backlash C2-Axis: 0.01 mm- Maintenance Status: Major contract maintenance performed in February 2026. Oil change for hydraulics is reported as due. Concentricity for C1 and C2 axes tested OK. Brushes/support table partially worn or warped.

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 4867, Pressta Eisele Stamping Machine HE 40 S Price: 2,000 Euros Bedpfx Afey Tizkexswt

Condition: good (used), Year of construction: 1993, Offer 23481 Technical data: - Pressure capacity 30 T - max. sheet thickness 6 mm - Max. punching diameter 105 mm Bedpfx Afsrgptioxjwt - stroke 42 mm - throat 700 mm - maximum stroke rate 200 H/min - Table dimensions W 1500 x D 1100 mm - table height 1000 mm - Drive 400 V / 4 kW - Space requirement approx. W 1600 x H 2000 x D 2200 mm - Weight approx. 3400 kg - with: - stop table with adjustable stops - Quick stamp change device - foot switch; - Emergency stop button - Various punches + dies in separate workbench