Used Peddinghaus Blechschere for sale (128)

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm Fsdet D Nz Aepfx Aarepd shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: used, Year of construction: 2005, punching pressure 50.0 t L-beam 100 x 8.0 mm flat steel 350 x 13.0 mm blade length 370 mm work height max. 734 mm voltage 400 V weight of the machine ca. 900 kg dimensions of the machine ca. 1000 x 700 x 1700 mm Features: - Flat steel shears Cuts flat steel: up to 350 x 13 mm L-steel, 45° cut: up to 100 x 8 mm Blade cutting length: 370 mm Working height: 734 mm - Profile and bar steel shears Shear cross-section: max. 1550 m² Stroke, infinitely adjustable: 10 - 36 mm - Shears with standard blade 90° L-steel 90° cut: up to 100 x 8 mm Round steel: 32 + 17 mm Square steel: 30 x 18 mm U-steel, 90° cut: up to 100 mm Double-T steel, 90° cut: up to 100 mm Working height (center of blade cross): 1044 mm - Notcher with square notcher U-steel, in flange: 80 - 120 mm Double-T steel, in flange 80 - 120 mm Fjdowu Hkfepfx Aaropd Notch width: 44.5 mm Notch depth: 50.0 mm Working height: 1000 mm

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm Fpsdpfx Aaoyrhyusrjd table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: used, total length: 1,700 mm, total width: 820 mm, total height: 1,570 mm, Empty weight: 580 kg - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4077950107003 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 38 Fpjdpfeymfbfex Aarjd - Round bar cutting capacity [mm]: 32 - Shearing width [mm]: 300 - Max. plate thickness shearing [mm]: 15 - Options: Length stop - Transport dimensions: 1700mm x 820mm x 1570mm (l x w x h) - Transport weight [kg]: 580kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,100 mm, total width: 1,670 mm, total height: 1,900 mm, Empty weight: 1.930 kg - Documentation available: No - CE certificate present: No - Serial number: 4422758897010 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 60 - Punch throat depth [mm]: 400 - Notching width [mm]: 70 - Max. plate thickness notching [mm]: 13 - Round bar cutting capacity [mm]: 40 - Shearing width [mm]: 400 - Max. plate thickness shearing [mm]: 20 - Options: Length stop - Transport dimensions: 1100mm x 1670mm x 1900mm (l x w x h) - Transport weight [kg]: 1930kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fpjdpsymfa Ujfx Aared Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Universal profile steel shear with punch station Peddinghaus Type 210 / 16 Year of manufacture: 1977 Press force: 60 t Punch: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90°: 130 x 13 mm L profile 45°: 100 x 11 mm T profile 90°: 130 x 15 mm T profile 45°: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Priced at €1,750 plus VAT ex location Fpjdpfx Aeyta E Eoarsd

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Section Steel Shear Peddinghaus Fpsdoyta Exspfx Aared Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material; punch actuation by hand lever; section steel shear operated by foot switch. Punch depth: 510 mm Pressing force: 60 t Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punch diameter: 27 mm in 17 mm Punch diameter: 39 mm in 12 mm Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,750 plus VAT, ex works

Condition: good (used), Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) Fpsdok D Nt Depfx Aarod -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Fpedsi Duh Iopfx Aarod Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: good (used), Peddinghaus Combined Section Steel Shear Type 210/ 13 See condition Fpsdpfx Aaev D Nzyorjd

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Manufacturer: Peddinghaus Model: Peddimaster 40/60H Year of manufacture: 1987 Shearing force: 60 t Punching force: 40 t Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories Fpodpfsxp Ndhex Aarod - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, Peddiworker 500 profile steel shear Hydraulic pressing force: 50 t Weight approx. 900 kg In very good condition Fsdpoynwvqofx Aaropd Cutting data: see table in the image Can be inspected under power Loaded free on truck, D - 88433 Schemmerhofen

Condition: used, Mechanical punching tool with a punching force of 1000 kN. Fedpfof Nwqajx Aarjpd Tool holder for stamps up to 90 mm can be mounted on request. A large assortment of stamps and matrices is part of the delivery scope.

Condition: used, Year of construction: 1991, Maximum punching force: 1100 kN Maximum shearing force: 1700 kN Punching depth: 510 mm Holes 31 in 25 mm Flat steel: 500 x 22 mm Hydraulic hold-down device for the flat steel knife Square notcher Weight: approx. 5000 kg Fpjdpfx Aef Nwn Uoarod

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Foot switch Fsdpfou Ick Tsx Aarepd The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools Punches and dies i.D. *

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min Fjdsydqn Sspfx Aarepd shear: flat material 150 x 15 mm shear: length of knifes 275 mm total power requirement 3 kW weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop

Condition: used, Technical details: Fpedpexu Dx Djfx Aarjd dimension machine xH: 1,8 x 1,1 x 1,0 m

Condition: good (used), functionality: fully functional, Year of construction: 1978, Equipment: foot remote control, Performance data: Sectional steel shears: L-steel 90° cut 80 x 8 mm L-steel 45° cut 50 x 6 mm Section steel cutter: L-steel 90° cut 60 x 6 mm T-steel 90° cut 60 x 7 mm L + T steel 45° cut 50 x 6 mm Special knives: U-steel 80 mm I-steel 100 mm Flat steel 80 x 12/ 120 x 8 mm Round steel cutter: Round steel 28 mm Square steel 25 x 25 mm Fpodpfx Aashx Ekporod Flat steel shear 100 x 11/10 mm triangular notcher 8 mm strokes: 36 1/min drive: 2,2 kW weight: approx. 450Kg Incl. base frame as shown All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm Fsdpeibq Itjfx Aarjpd dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Fpedpfxewcqmao Aarsd Manufacturer: Peddinghaus Model: 210/25s Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Fpsdpfxjh Uhb Se Aarod Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: used, round bar steel 34 mm square edge steel 30 x 30 mm L-beam 100 x 10 mm flat steel 100 x 14...160 x 11 mm blade length 175 mm T-beam 100 x 10 mm notching: l + T material 10 mm hole punhing press: pressure 45 t throat 305 mm total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 0,8 x 1,5 m Fpsdpfx Asyh Rnksared * 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch * 2 foot switches * contact limit stop * various punching saddles

Condition: used, Year of construction: 1999, pressure 30 t plate thickness 800 mm Fodjvanvzjpfx Aarjpd keins weight of the machine ca. 1,3 t

Condition: good (used), Year of construction: 1988, Ja Stanzkraft 800 kN frequency 50 Hz current 17/11 A voltage 220/380 V round bar steel 32-17 mm square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm Foderyaqyspfx Aarspd total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg Fedohxzmcspfx Aarspd +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++