Used Section steel shears 50 - 79t punching power for sale
5
Section steel shears, profile shears, punch, punching machine, hole punch
T8vwchnbq
-Pressure force: 40 to
-Punching
-Scissors
-to cut
-notch
-mechanical release
-Foot switch: 1
-div. Punches and dies
-Dimensions: 800/1250/H1800 mm
-Weight: 1112 kg
8
round bar steel - mm
square edge steel - mm
L-beam 120 x 13 mm
hole punhing press: pressure 60 t
hole punching press: throat 510 mm
hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm
shear: flat material 500 x 14 mm
shear: flat material 400 x 16 mm
shear: flat material 180 x 20 mm
shear: flat material 120 x 21 mm
shear: flat material 100 x 22 mm
total power requirement 7,5 kW
weight of the machine ca. 2,5 t
dimensions of the machine ca. 1,8 x 0,9 x 1,8 m
Xail9kxp
Hydraulic Section Sh...
Punching force: 600 kN (e.g. punches 24 m in 20 mm steel) Cuts 150 x 15 mm on the flat steel shears Foot switch for triggering the stroke Support table on the punching side Quick change device assortment of tools is included in the price
Fxgfxfd0g
10
pressure 60,0 / 80,0 t
punching cross-cut in cmm 27,0 in 17,0 mm
stroke 10 - 27,5 mm
throat 410 mm
shear: flat material 400 x 16 mm
flat steel oder 200 x 20 mm
square material 32 x 32 mm
round bar steel 35 x 35 mm
L-beam 120 x 12 mm
total power requirement 7,5 kW
weight of the machine ca. 2.400 kg
dimensions of the machine ca. 1000 x 1350 x 1800 mm
Furnishing:
- hydraulic, combined profile steel shears
* with release station
* with hole punching station .. punching capacity 60kN
* Flat steel ...
4
Make:GEKA
Type:Hydracrop 70 S
Year:1998
Specifications
Metric US Standard
Stroke adjustable
80 mm
Punching force
Caiy8iezna
70 T
Capacity Ø x thickness
28 x 20 mm
Table Length
800 mm
Table Width
500 mm
Throat
300 mm
Capacity L profile
130 x 130 x 13 mm
Number of strokes
40 Min.
Power
7.5 kW
Dimensions (Estimate)
Length
2000 mm
Width
1200 mm
Height
2000 mm
Weight
1800 kg
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturer...
6
combined punching machine, flat steel shear and profile steel shear for angle steel, foot pedal, all cutting stations equipped with new knives.
Machine has been repaired by specialist, checked, cleaned and is fully functional. Test run has been carried out.
flat steel: 250 x 6 mm
Angle steel: 75 x 75 mm
Muebtp
Punching pressure: 32 t
throat: 150 mm
Space requirement: 1200 x 800 x 1500 mm
Machine weight: 1016 kg
Total power requirement: 32 A
Punching: 25 in 12 mm
7
- Capacity 70 tons
- Hydraulic
- 5 stations
- Electric back gauge
- Central lubrication system
- Foot control
- Emergency stop
- With strokes
Dzhlcm
- 400V
3
round bar steel 60 mm
square edge steel 60 mm
L-beam 120 x 12 mm
Punch power 800 kN
hole punching press: throat 400 mm
hole punching press: max. length of stroke 32 mm
hole punching press: capacity (dia. x thick.) 30 x15 mm
hole punching press: capacity (dia. x thick.) 20 x 20 mm
notching: l + T material 80 x 10 mm
no. of strokes 40 / 46 Hub/min
shear: flat material 150 x 15 mm
shear: length of knifes 275 mm
total power requirement 3 kW
weight of the machine ca. 2,9 t
dimensions of machine L x W...
6
Profile steel shears and hole punch with a punching force of 700 kN, with SAT table
Omybd
10
hole punhing press: pressure 75,0 t
output 30 in 22 mm
round bar steel 50,0 mm
square edge steel 45,0 mm
L-beam 150 x 13 mm
throat 320 mm
flat steel 450 x 15 mm
stroke Stanze 0 - 70 mm
oil volume 90,0 l
Cywsn8nu
total power requirement 7,5 kW
weight 1.830 kg
range L-W-H 1540 x 750 x 1660 mm
Furnishing:
- hydraulic profile steel shear
- Punching station with support table
- Infinitely variable stroke adjustment with inching/setup mode
- Triangular notching station with support table
- Bar, pro...
4
round bar steel 45 mm
square edge steel 40 mm
L-beam 120 x 13 mm
stroke adjustable 15-40 mm
perforates: 27 Durchm in 17 mm
punching throat 510 mm
blade length 500 mm
tipping mechanism 13 mm
flat steel 300 x 18 / 400 x 16 mm
oil volume 80 l
Beocxjmdpo
Drive 7,5 kW
hole punhing press: pressure 60 t
weight of the machine ca. 2380 kg
dimensions of the machine ca. 1,8 x 0,9 x 1,9 m
Condition: ready for operation
Video available on our website.
Electric 380 Volt
Foot switch
Positioning rod ...
Section steel shears, profile shears, punch, punching machine, hole punch
Bnmgygzlf9
-Pressure force: 29 to
-Punching:
-Scissors:
-to cut:
-not:
-mechanical release:
-div. Punches and dies:
-Length stop:
-Installation dimensions: 1300/1570/H1900 mm
-Transport dimensions: 1300/770/H1900 mm
-Weight: 1112 kg
5
.
Technical data:
Punching pressure: 75 to
max. punching capacity: ∅ 30 x 22 mm
stroke: 70 mm
Caj3vyumi7
max. stroke rate: 42 / min.
flat steel: 450 x 15 mm or 300 x 20 mm
angle steel: 150 x 13 mm
Square steel: 44 mm
Round steel: ∅ 50 mm
.
Dimensions (length x width x height): approx. 1800 x 750 x 1700 mm.
Driving power 7,5 kW
Weight: 2,2tons
5
round bar steel 45 mm
square edge steel 40 mm
L-beam 120 x 13 mm
flat steel 500 x 12 mm
punching pressure 60 t
throat 510 mm
500 x 12 oder 400 x 16 mm
punch diameter 27 in 17 mm
punch diameter 39 in 12 mm
oil volume 80 l
total power requirement 7,5 kW
weight of the machine ca. 2,4 t
dimensions of the machine ca. 1,8 x 0,9 x 1,8 m
Bu0pp2gogl
Hydraulic machine with 5 stations so punching, notching, shearing flat iron,
angle iron, solid material, punching with hand lever, profile steel side wi...
10
punching force: 700 kN
Gxofgs
Throat: 510 mm
mass: 3000 kg
Support table Quick change device assortment of tools is included in the price
10
punching pressure 60,0 t
punching cross-cut in cmm 31 in 15 mm
square edge steel 40,0 mm
L-beam 160 x 80 mm
flat steel 400 x 16 mm
throat 400 mm
round bar steel 40,0 mm
total power requirement 5,5 kW
weight of the machine ca. 1.950 kg
dimensions of the machine ca. 1700 x 1050 x 1980 mm
Furnishing:
- Stop / support table at punching station
- Support table at the notching station
- Flat steel knife, 375 mm long, with four cutting edges,
- also for angle steel section 45°
- Material support tab...
7
round bar steel 45 mm
square edge steel 42 mm
L-beam 140 x 13 mm
flat steel 350 x 20 mm
pressure 550 kN
throat 305 mm
notching: rectangle tool mm
total power requirement 5,5 kW
weight of the machine ca. 1260 kg
dimensions of the machine ca. 1360 x 750 x 1565 mm
Hjpc2jp
2 working cylinder with 2 separated electric foot switch for 2-people-handling
New notching table, new knife for the rectangle notcher and new punching table included
For further information please see brochure.
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat / profile and bar steel shears
B0sahlj0p9
-Manufacturer: Mubea, profile steel scissors 3-fold combined type BK 11
-Pressure force: 29 to
-Accessories: including div. See photos for stamps and dies
-Dimensions: 1230/720 / H1590 mm
-Weight: 908 kg
5
pressure:60 t
B9xxc0bjjn
stroke:27 mm
flat material:200 x 18 oder 220 x 15 mm
blade length:250 mm
working range 90°:120 x 12 mm
working range 45°:90 x 90 mm
round bar steel:45 mm
square edge steel:40 mm
throat:370 mm
total power requirement:3 kW
dimensions of the machine ca.:1000 x 2000 x 1600 mm
weight of the machine ca.:2200 kg
6
round bar steel: 40 mm
square edge steel: 38 mm
angle steel: 100x100x12,5 mm
pressure capacity max.: 50-105 t
Number of working hours: 1426 h
total power requirement: ca. 6 kW
weight of the machine ca.: 2,8 t
space requirements of the machine approx.: L:2,75x1,3x1,85 m
Nt0oj
Combined Section Steel Shear hydraulic also suitable to cut wavy profile.
- hole punch: 50 t with max. 37mm in 16mm sheet
- edge shear: 45t with 76x76x8 sheet
- notching: 45t with 76x50,8x9,5mm sheet
Attention! Machine is w...
12
Punching force: 700 kN Projection: 510 mm Punches e.g. 30 mm holes in 20 mm material Cuts 500 x 18mm on flat bar shears. Assortment of tools is included Weight: 3,000 kg
B3pvq0gabi
5
round bar steel:42 mm
square edge steel:38 mm
L-beam:90° 110x10 mm
flat steel:150 x 16 mm
blade length:250 mm
notching deepth up to:12 mm
notching: l + T material:80 x 10 mm
hole punhing press: pressure:50 t
stroke:27 mm
Y7lcmmo8m
hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm
weight of the machine ca.:1,6 t
dimensions of the machine ca.:1,6 x 0,85 x 1,8 m
6
Sectional steel shear combined with hole punching and notching station
pressing force shear 130 to, pressing force punch 70 to, shear capacity 450x15 mm, knife length 475 mm, punching capacity Ø 28x20 mm, throat at punching device 500 mm, punching table size 530x1150 mm with stops, motor power 4,0 KW, with many punching tools and foot pedal, dimensions 1300x2100x1800 mm, ca. 2400 kg
B3qw8ea0bm
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears
-Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350
N3ji2
-Drive: hydraulic
-Pressure force: 35 to
-Equipment: large support table with stops for punching
-Punching
-Scissors
-to cut
-notch
-div. Punches and dies
-Dimensions: 1460/1700/H1690 mm
-Weight: 1080 kg
7
Hydraulic combined
Punching machine + sectional steel shear
Fab. Peddinghaus type. Peddiworker 501
Very good condition, year 1993
Technical data
Make: Peddinghaus
Type: Peddiworker 501
Year of manufacture: 1993
Power: 50 t
equipment:
- electric contact stop
All data without guarantee.
Jx0hfa
The machine is in good condition. A demonstration under power is possible at any time in our showroom.
2
5-fold combined sectional steel shear with notching device and hole punching machine
make MUBEA type HIW 550/510
Toltqgfj
machine # HIW550/510/94 year of construction 1999
Technical data:
Flat steel shear 350 x 13 mm
angle steel shear L-steel 90° 140 x 13 mm
L-steel 45° 70 x 7 mm
steel bar shear round/ square 45 / 42 mm
notching device 10 mm
Punching force 55 t
throat 510 mm
punches 30 in 16 mm
stroke of the punch stepless 0 - 60 mm
number of strokes of the punch at 20 mm path 42 strokes / min
d...
8
Max. punching and shearing capacity: 600 kN With an assortment of punches and dies
Puyw23
5
Geka hydraulic section shears
Punching force: 55 ton
Double cylinder with 2 foot pedal
Hole: 40 x 10 mm
Uu7nn8mv
Round: + box: 40 mm
Scissors: 300 x 15 mm
9
- Capacity 50 tons
- Hydraulic
- 5 stations
- Electric back gauge
- Foot control
B8utrsyrdo
- Emergency stop
- With strokes
- 380V
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears
-Manufacturer: Mubea, profile steel shears 3-way combined, type Profi 500
-Pressure force: 50 tons
-Punching:
Crucn3r3
-Scissors:
-to cut:
-release:
-Dimensions: 1240/720/H1350 mm
-Weight: 1206 kg
7
Hydraulic combined
Punching machine + sectional steel shear
Fab. Peddinghaus type. Peddiworker 500
Very good condition, year 1991
Technical data
Make: Peddinghaus
Type: Peddiworker 500
Year of manufacture: 1991
Power: 50 t
equipment:
- electric contact stop
- div. punches and dies
Uiocjnhz
All data without guarantee.
The machine is in a good condition. A demonstration under power is possible at any time in our showroom.
1
Data :
Hole punch : 700 kN
throat 510 mm
.
Flat steel : 500 x 18 mm
Rectangular clinker : 65 x 85 x 13 mm
section steel shear : according to enclosed data
.
with contact length stop 2000 mm
for flat steel and section shears
.
.....
B70gfd3skz
12
Max. punching force: 750 kN Including assortment of tools
3prpek3u
2
Hydr. 4-fold combined sectional steel shear make MUBEA type KLSH 550
Technical data:
Power of flat steel shear 200 x 20 / 400 x 16mm
cutting length 400 mm
Power of sectional steel shear
L-steel 120 x 13 mm
or 130 x 90 x 12 mm
round steel 35 mm
Square steel 32 mm
U steel U 160
Hole punching capacity
pressure capacity 50 t
stroke 50 mm
punches 30 in 15 / 28 in 16 mm
throat 320 mm
Notching device power
Triangular notcher
L + T - iron 75 x 8
notching depth 80mm
Notch width 40 mm
General data of the ...
9
OFFER 22076
Hydr. flat profile and bar shears with notching device and hole punching machine
Technical data:
G0u8tq7
- Flat steel shear cuts up to 450 x 15 mm.
- section steel shear
- cuts - L-steel at 90° 130 x 13 mm
- bar steel shear
- cuts round steel up to 45 mm
- square steel up to 45 mm
- notching device - with square notcher 90 x 90 x 12 mm
- punching machine - punching force 700 KN
- with stop table
- throat 500 mm
- punches in steel up to 40 mm Ø in 14 mm
- or 24 m...
4
Flat steel scissors: 180 x 20 mm
Cutting length: 410 mm
Gsaajya
Profile and steel bar shears: max. Cross section 3000 mm²
L-iron at 90/45 °: 110 x 10/65 x 8 mm
T-steel at 90 °: 90 x 10 mm
Round / square steel: 35/32 mm
Notching device with triangular and rectangular notching tool: 12 mm
Hole punch: 50 t or 500 kN
Projection: 410 mm
punches holes: 30 Ø in 15 mm
Number of strokes electr. gradual adjustable: 0 - 40 / min
electr. Connection: 380 V, 7.5 kW
Required space: 1400 x 1200 x 1800 mm
Weight...
1
Sectional steel shears PEDDINGHAUS 210 Super 13
Ltpof
various accessories, approx. 300 parts
compressive force: 60 t
flat steel processing: 150 x 16 mm
electrical connection: 380 V, 3 kW
space requirement: 1550 x 820 x 1930 mm
weight: 1950 kg
2
a used well preserved profile steel shear equipped with:
Punching table with die holder
square notcher
P2o9qn
Angle steel knife in the profile steel shear
Mitre gauge for mitre cuts
Steel bar shear
Flat steel shear
Hydraulic material clamping in profile and flat steel shear
Hydraulic finder for punching machine
Foot pedal
Special punching device SV90
Punching capacity 60 tons
Further technical data on request.
Max. punching and shearing capacity: 600 kN punches e.g. B. 31 mm holes in 15 mm steel Shears on the flat steel shears to 400 mm up to a material thickness of 16 mm steel Hydraulic hold-down device on the flat steel shears Further technical data on request With an assortment of punches and dies as desired
Bza2vq9vdl
1
5-fold combined sectional steel shear make PEDDINGHAUS type 210 Super 13
machine # 580AC015 year of construction 1979
technical data:
Flat steel 200 x 13 mm
L-steel 120 x 13 mm
U-steel 180 mm
Round steel 45 mm
Square steel 40 mm
punching force 65 t
8s3um9u
punches 27 in 19 mm
or 90 in 5,5 mm
stroke 25,5 mm
throat 370 mm
weight approx. 2100 kg
used, special price
5
Technical data:
Punching pressure: 75 to
max. punching capacity: ∅ 30 x 22 mm
07k00whf
stroke: 70 mm
max. stroke rate: 42 / min.
working radius: 510 mm
flat steel: 450 x 15 mm or 300 x 20 mm
Angle steel: 150 x 13 mm
square steel: 44 mm
Round steel: ∅ 50 mm
Dimensions (length x width x height): approx. 1650 x 1050 x 1950 mm
Weight: approx. 2.5 tons
The seller is not liable for writing or data transmission errors. The machine is in appearance, technique and wear according to the age; used machines...
8
Hydr. Flat, profile and bar steel shears with notching device and hole punch Offer number: 15229Factory: MUHR BENDERTyp: KBLH 700Machine no.: 01562869552445 Year of construction: 1986Technical data:-two separate working cylinders, - it can be worked at two working stations simultaneously - flat steel shears - knife length 520mm - for flat material 500x 18mm profile steel shears - L- steel at 90° 130x 12mm at 45° 90x 10mm - T-steel at 90° 180mm bar steel shears - round steel 65mm - square steel 6...
Strokes per minute with 15 mm stroke 34 /min.
punching force 500 kN
hole diameter and thickness up to max. 27x13 or 20x18 mm
flat steel (2 inclination) up to max. 350x10 mm
flat steel (5 inclination) up to max. 350x15 mm
Angle steel 90 degrees up to max. 80x80x8 mm
Bar steel up to max. 35 mm
Gurc3eb
Square steel up to max. 30 mm
Notching up to max. 10 mm
Bending capacity:
Pick-up up to max. 100x10 mm
Motor power 3,0 kW
net weight 950 kg
Gross weight 1150 kg
5
Round steel: 36 mm
Square bars: 30 mm
Angle steel: 100 x 10 mm
Flat steel: 100 x 18 mm
Stroke rate: 42 / min
Lifting height: 25 mm
Hole punching: without
Angle and T steel 90°: 100 x 10 mm
Shear L and T steel 45°: 70 mm x 8 mm
Steel round / square: 36 / 30 mm
Notching: 10 mm
V Jack: 50 mm
U Jack (rectangle): 50 x 30 x 8 mm
Connection: 2,5 kW
Condition: good, ready for use
Weight: 1,8 t
Size: 2,100 x 800 x 1400 mm
Betcxufxml