Used Hydraulic Shears for sale (15,926)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, working width: 3,000 mm, cutting angle (min.): 1.5 °, sheet thickness (max.): 30 mm, throat depth: 100 mm, TECHNICAL DETAILS Sheet metal width: 3,050 mm Sheet metal thickness: 30.0 mm Stand extension: 100 mm Cutting angle: 1.5° - 3.5° Adjustment speed: max. 200 mm/s MACHINE DETAILS Dimensions & Weight Dimensions: 4,700 x 3,535 x 2,980 mm Weight: 36,000 kg Ncodozlg Sbepfx Alajw

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge Nedpsznngxefx Alajcw * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: good (used), Year of construction: 1996, sheet width 3050 mm plate thickness 6.5 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable 750 mm work height max. 770 mm no. of strokes 11 - 22 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 5 voltage 380 V engine output 11.0 kW weight of the machine ca. 5000 kg range L-W-H 3950 x 1750 x 1720 mm Features: - Electro-hydraulic / slide-guided panel shear - HACO NC control, Model SC 5, front left Njdpfozndq Tjx Alajcw * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction of the backgauge * Emergency stop switch - Electromotor-driven backgauge, mounted on ball screws - Hydraulic sheet metal hold-down devices - Front finger guard - 1x long side stop - 1x freely movable foot switch - Operating instructions in German (PDF)

Condition: good (used), Year of construction: 1986, Max. working width: 4000 mm Njdpoy A Eg Uofx Alascw for sheets with tensile strength of 40 kg up to: 3 mm Table width: 470 mm Backgauge adjustment: 1000 mm Fixed cutting angle: 1°30' Frame throat depth: 200 mm Hydraulic drive: 380 V, 7.5 kW Required space: 4650 x 1830 x 1420 mm (height) Weight: 5.7 t

Condition: used, LVD MVS 5050 × 6 – Technical Specifications: * Maximum sheet thickness: 6.35 mm Nodpfxozmam Io Alascw * Maximum cutting length: 5,050 mm * Back gauge range: 750 mm * Adjustable cutting angle: 0.5° – 2.5° * Adjustable blade clearance: 0.05 – 0.7 mm * Strokes per minute: 12 – 45 * Main motor: 15 HP (approximately 11 kW) * Machine weight: 12,000 kg * Power supply: 230 V

Condition: excellent (used), Year of construction: 2001, sheet width 4000 mm Ncedpfx Aey Diaholaew plate thickness 16 mm total power requirement 37 kW weight of the machine ca. 20 t dimensions of the machine ca. 4700 x 2100 x 2000 mm

Condition: used, Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Mechanically adjustable rear stop (2 speeds) up to 1000 mm with analog display Side stops and table extensions Ncsdpozl Dr Sjfx Alaew cutting length limitation Cutting edge lighting knife sharpened Weight approx. 5500 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Sheet metal shearing machine LVD CS 06/31 Manufacturer: LVD Type: CS 31/6 Ncodpfx Alszmimqsajw Year of manufacture: 9/2022 Condition: used, like new Further information available upon request.

Condition: good (used), functionality: fully functional, Year of construction: 1978, Used conventional press brake by Darley Type AP 150 3100 Ncjdpjzk Hl Esfx Alaew Capacity: 3100 x 150 tons Simple operation The front beam partially sinks into the ground Includes tooling

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used small hydraulic plate shear from OMAG Njdozk Akdepfx Alajcw Type: CEL 104 Capacity: 1050 x 4 mm Electric back gauge Year of manufacture: 1987

Condition: used, Year of construction: 2021, 2021 | Demarec DCC-30-C | Used Hydraulic Shear 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 42000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: A nice concrete crushing shear for 20-35 ton excavators. Jaw opening is 1,150mm. It has an Oilquick OQ80 quickcoupler. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41126 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Nodpfjzlrqvjx Alascw 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2008, sheet width 3050 mm plate thickness 30.0 mm column arm 100 mm cutting angle 1,5° - 3,5° adjustment speed max. 200 mm/s Ncodpfx Aozkvx Islaew weight 36.000 kg dimensions 4700 x 3535 x 2980 mm

Condition: used, Year of construction: 1996, sheet width 3050 mm plate thickness 10 mm Ncodpfx Alozl E S Hsasw 11 kW range L-W-H 4000 x 2220 x 1830 mm weight 6.300 kg

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear Ncedpozkvx Ujfx Alaow * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: used, LVD Shear Ncsdex Tqtbjpfx Alaow Type HST C-10/31 Capacity 3000 x 10

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Type: ATS 3006 Capacity: 3100 x 6 mm Electric back gauge Ncedpfx Aozi Rl Telaow Electric cutting angle adjustment Year of manufacture: 1987

Condition: good (used), Demolition shears, demolition pliers, hydraulic demolition shears -Demolition shears: Hydraulic demolition shears, without hydraulic power unit -Opening width: 290 mm -Transport dimensions: 950/800 (H140 mm -Weight: 94 kg Ncsdpfjzkkc Iex Alaow

Condition: used, Manufacturer: DIGÉP Model: DLB 7/2550 Ncedpfex H Rzrex Alasw

Condition: used, Year of construction: 2006, sheet thickness (max.): 6 mm, Brand: DURMA Type: VS 3006 Njdpfx Ajwrx Taolaecw Year of manufacture: 2006 Maximum sheet width: 3080 mm Maximum sheet thickness: 6 mm

Condition: used, functionality: unexamined, Year of construction: 2007, control type: PLC-controlled, working width: 3,000 mm, cutting angle (max.): 3 °, sheet thickness brass (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, overall weight: 8,500 kg, SP8 control system capacity 3000 x 12 mm power 22.5 kW electric stops Ncedpfx Alsznvgmsajw weight 8500 kg

Condition: used, functionality: fully functional, Year of construction: 1985, operating hours: 27,150 h, machine/vehicle number: 2723007, control type: NC control, actuation type: hydraulic, working width: 3,000 mm, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, total length: 4,000 mm, total width: 2,500 mm, total height: 1,700 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, type plate available, This machine is still in use in the factory during the manufacturing process and is ready for demonstration immediately. Nodpfx Aezn A Epelaocw

Condition: excellent (used), Year of construction: 2013, AMADA MODEL GS 11 840 8 mm x 4050 HYDRAULIC year 2013 PROGRAMMABLE CNC SHEAR STAINLESS STEEL CAPACITY 6mm ALUMINIUM CAPACITY 10 mm CUTTING LENGTH 4050MM POWER BACK GAUGE 1000MM PNEUMATIC SHEET SUPPORTS SIDE GUAGE 1.5 METRE SERIAL NUMBER HOLD DOWN HYDRAULIC BLADE GAP ADJUSTMENT STANDARD VARIABLE RAKE STANDARD SHADOW LINE LIGHT STANDARD CENTRALISED LUBRICATION STANDARD SHADOW LINE LIGHT STANDARD STROKE COUNTER STANDARD ADJUSTABLE STROKE STANDARD Ncedpfx Aljyr H U Dsasw MOTOR 16 KW WEIGHT 11650KG

Condition: excellent (used), Year of construction: 1998, AMADA MODEL GPN 630 HYDRAULIC SHEAR PNEUMATIC REA SHEET SUPPORTS ELECTRONIC REAR SAFETY GUARD Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 2.0 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORTS SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER BLADE GAP AND RAKE ANGLE ADJUSTMENT Nodpfx Ajyypb Rslajcw ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE PNEUMATIC SHEET SUPPORTS HOUR COUNTER AUTO-DIAGNOSTICS

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, working width: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 6,500 kg, Hydraulic plate shear Manufacturer: Schrödergroup, Type: Powershear – 3000 x 6mm Year of manufacture: 2020 Technical data Manufacturer: Schröder Type: 530 - 30/6 Year of manufacture: 2020 Njdpszi Ezvjfx Alascw Sheet width: 3040 mm Sheet thickness: 6.00 mm (400N/mm) Shear gap adjustment: 0.5 – 1.8 mm Stroke rate: 24-61 strokes/min Drive power: 12.0 kW Space requirement (L x W x H): approx. L 4.00 x 3.00 x 1.96 m Weight: approx. 6.5 t Equipment - 12" touchscreen control PSC 150 on a swiveling panel - energy-efficient drive for frequency-controlled motor and pump - automatic shear gap adjustment - Adjustable clamping pressure, pre-selectable via the control unit - motorized back gauge 10-1000 mm on ball screw spindles - pneumatic sheet metal holding device - LED cutting edge lighting - programmable start and end position of the blade beam - angle stop mounted on the left, incl. electronic length measuring system, fine adjustment and side folding stop on linear guide 1000 mm - 2 stop arms with ball rollers, movable on a linear guide - table support made of stainless steel sheets, incl. ball rollers - protection of the rear side with a light curtain - scrap and small parts chute to the front, incl. "Return to Sender" function - movable table extension mounted on a guide rail - finger guard, retractable to approx. 1500 mm, incl. electrical protection All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 800 h, control type: NC control, controller manufacturer: Delem, controller model: DAC-362, working width: 4,050 mm, sheet thickness (max.): 10 mm, Delem DAC-362 NC-control programmable limit stop Ncedpszkty Aofx Alaow automatic cutting crack adjustment automatic cutting angle adjustment The machine has only 800 working hours Technische Daten / technical details: Schnittlänge / max. cutting length 4050 mm Schnittleistung / cutting capacity 10 mm Ausladung / overhang 210 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 15 kW Gewicht der Maschine ca. / weight 18000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.