Used Mechanical Guillotine Shear for sale (8,124)

Condition: used, machine/vehicle number: 739791201, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Sheet metal width: 2,040 mm Sheet metal thickness: 3.25 mm Stand distance: 2,200 mm Redpfx Ao Aa A Niefgsch Performance data Total power requirement: 7.5 kW Dimensions Space requirement: approx. 2.55 x 2.3 x 1.4 m EQUIPMENT Rear stop Front support arms Emergency stop Foot switch Piece counter

Condition: used, Year of construction: 1988, machine/vehicle number: 46922, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Sheet metal width: 2,050 mm Sheet metal thickness: 1.5 mm Frame width: 2,100 mm Frame overhang: 100 mm Table width: 300 mm Performance data Stroke rate under load: 50 strokes/min Total power requirement: 4.0 kW Machine weight: approx. 1.85 t EQUIPMENT Manual back gauge, 550 mm 1 side gauge Rcodpfx Afs Aa A T Isgeh 2 support arms Foot switch

Condition: new, Year of construction: 2026, Quick reverse movement, high cutting capacity with low power Strong steel welded frame structure Maintenance-free guides and bearings. Operating pedal, safety buttons Front material support up to 920 mm 5m 32Amp cable to power the machine CE certificate Automatic stop with digital position readout, length 0 - 750 mm with pneumatic sheet support system with rear material pick-up compressed air connection required min. 6 bar Rcsdpfx Asl Exypjfgeh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1969, machine/vehicle number: HS 205-4, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, table height: 900 mm, back gauge: 1,000 mm, input voltage: 380 V, input frequency: 50 Hz, operating pressure: 175 bar, overall weight: 2,500 kg, total length: 2,600 mm, total width: 1,950 mm, total height: 1,400 mm, Equipment: emergency stop, foot remote control, A Wila brand plate shear in very good condition. It is comparable to the Safan brand. The machine is somewhat older. The back gauge moves very smoothly, but currently needs to be adjusted manually. It does not have a drive mechanism. Rjdpfsz Dgttsx Afgech

Condition: good (used), Year of construction: 2015, machine/vehicle number: 3131151803, Offer 26255 Technical specifications: - max. working width 1350 mm - max. cutting capacity St 40 3 mm - cutting angle 2.30° - motorized back gauge 20 - 750 mm - sheet metal lifting, pneumatically assisted - rear guard with light curtain - front angle stop + support arms - stroke rate depending on cutting length up to 42 strokes/min - pneumatic connection 6 bar - drive 400 V / 7.5 kW - table height approx. 850 mm - electric foot pedal - space requirement including back gauge and rear guard, without front support arms - approx. W 1950 x H 1250 x D 1950 mm Rsdpfxe Af Igxs Afgjch - weight approx. 1800 kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 122019, Offer 25507 Technical data: - max. working width 2520 mm - max. material thickness 2.0 mm - cutting angle 2.2 ° - stroke rate up to 25 1/min - motorized back gauge with positioning control ELGO up to 750 mm - table height 850 mm - front angle stop - pneumatically assisted sheet metal lifting Rjdpfx Afe Af Ihvogsch - electric foot pedal - jog function - individual stroke can be preselected - rear safety guard - drive 400 V / 3 kW - space requirement approx. B 3450 x H 1150 x D 2200 mm - weight approx. 1600 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 00521120, MACHINE SPECIFICATION Maximum cutting thickness 1.5mm Maximum Cutting length 1030mm Shear angle 3 degrees Working pressure 7 to 10 bar Dimensions (L x W x H) 1380mm x 1210mm x 1300mm Approximate weight 195Kg MACHINE EQUIPPED WITH Squaring arm Rear guarding Trailing footswitch Rsdpfx Afszia Nzogjch

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, Colly hydraulic plate shear, type GTS 2 4006 working width 4050 mm Rcedpfj Af Ivxsx Afgoh maximum sheet thickness 6 mm motorized back gauge Elgo digital adjustment for the back gauge

Condition: used, functionality: fully functional, control type: manual, degree of automation: manual, actuation type: manual, sheet thickness (max.): 1 mm, Manual guillotine shear JÖRG 4111 with a robust, heavy-duty workshop construction. Designed for precise manual cutting of sheet metal. This machine is suitable for metalworking workshops, maintenance departments, small-series production, and vocational training facilities. Technical specifications: • Manufacturer: JÖRG • Model: 4111 • Machine type: manual mechanical guillotine shear • Maximum cutting length: 1,020 mm • Maximum cutting capacity in mild steel: 1.0 mm • Maximum cutting capacity in aluminum: approximately 2.0 mm • Manual operation – no electrical connection required • Robust, stable workshop construction • Compact design • New cutting blades installed Rcedpfoz Dqywsx Afgsh The machine is used and shows normal signs of previous industrial use. Overall visual condition is good. A simple, reliable, and economical machine for straight cutting of sheet steel, aluminum, and other thin sheet materials. Internal reference: 48979-113 The machine is located in Latvia and is available immediately. Loading assistance is available. Transport within the Baltic States and to other European countries can be arranged upon request. The machine is sold as shown in the photographs. Inspection is possible by prior appointment.

Condition: good (used), functionality: fully functional, FS Frank Schäffler Used Machines You are bidding on a branded sheet metal shear from the well-known German manufacturer Schechtl. Features of the machine: Cuts materials up to 2 mm thick, such as iron and aluminum (see nameplate) Usable length: slightly over 1.5 m Rear stop: 500 mm Side/angle stop Manual and foot operation See pictures; the machine has not been overhauled and comes from a school workshop. Good condition. You will receive an invoice according to §25a UStG; the value-added tax is included in the invoice amount. Optionally, a matching bending brake, as well as a manual shear, are available. I can arrange transport with a shipping company if desired. Rsdpfx Afoz Ig Aisgech Free loading as shown in the pictures. Inspection and testing are possible after scheduling an appointment by phone. Payment in cash upon collection or by bank transfer. If I can do anything else for you, please call me briefly. Thank you. Collection should take place within 8 days after the end of the auction. Location: 97261 Güntersleben Article number 260908 Schechtl 1.5 m

Condition: used, functionality: fully functional, Year of construction: 2012, control type: manual, actuation type: electric, working width: 1,250 mm, cutting angle (min.): 1.5 °, stroke rate (min.): 35 1/min, sheet thickness (max.): 3 mm, table height: 800 mm, back gauge adjustment: motor-driven, back gauge: 650 mm, back gauge travel distance R-axis: 650 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 24 V, overall weight: 1,450 kg, total length: 1,920 mm, total width: 2,130 mm, total height: 1,350 mm, number of support arms: 2, Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Year of manufacture: 2012 Cutting length: 1250 mm Sheet thickness: 3 mm Cutting angle: 1° 30' Strokes/min: 35 Working height: 800 mm Rear gauge, motor-adjustable, max. 650 mm Table width: 305 mm Motor power: 5.5 kW Length: 1920 mm Depth: 2130 mm Height: 1350 mm Connection: 400V, 13 A Weight: 1450 kg High operator safety thanks to protective guard and light barriers Activation via foot pedal, keeping hands free for positioning the sheet Rcedpfez S Hu Uox Afgeh Support arms with scale on the front for large sheets Motor-driven adjustment of the precise rear gauge via control panel Spring-mounted clamping beam with rubber plates

Condition: new, functionality: fully functional, control type: NC control, degree of automation: semi-automatic, actuation type: mechanical, working width: 1,360 mm, sheet thickness steel (max.): 3 mm, back gauge: 750 mm, control voltage: 400 V, overall weight: 1,240 kg, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Standard equipment includes a sheet clamping device, making it optimal for thin sheets. Support arms at the front facilitate the handling of large panels. The electrically driven rear gauge ensures precise movement with rolling ball screws. A clearly laid-out control panel with integrated control system. Robust steel sheet construction ensures vibration-free operation. Support table with rectangular stops on both sides. High operator safety due to protective guard and rear-mounted light barriers. Double-edged knives made from high-quality steel guarantee clean and burr-free cuts. The automatically operating hold-down device ensures secure sheet clamping. Redsyt Ia Repfx Afgsch Technical specifications: Cutting length: 1360 mm Maximum sheet thickness (mild steel): 3 mm Cutting angle: 2° 30‘ Strokes per minute: 31 Working height: 810 mm Rear gauge: 0–750 mm Table width: 390 mm Motor power: 3 kW Voltage: 400 V Dimensions (W x D x H): 1930 x 2100 x 1260 mm Weight approx.: 1240 kg

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left Redpfx Ajzl A Rajfgech - Sliding carriage

Condition: ready for operation (used), Year of construction: 2002, Available immediately ex-yard: Hydraulic plate shear Baykal Rcodpfx Ae Afcmljfgsh Type HGL 3100 x 6 Year of manufacture 2002 Cutting length 3060 mm Steel 6 mm Stainless steel 4 mm Distance between uprights 3100 mm Hydraulic hold-down clamps 16 pieces Strokes/min 15 Controlled back gauge 6 - 1000 mm Cutting angle 1.6 degrees Drive power 19.5 kW Weight 6300 kg Price: EUR 8,500.00 plus VAT, ex-yard.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, control type: PLC-controlled, Equipment: CE marking, documentation/manual, type plate available, Capacity: 4100 x 6 mm. Stroke: 120 mm. Control: DURMA DT-7. Serial No.: 608922260. Dimensions: 5230 x 3600 mm. Height: 2150 mm. Weight: 11,460 kg. Rjdpfx Afjyrdfajgoch

Condition: used, functionality: fully functional, Sacma 3000x6 mechanical guillotine shear, motorized back gauge, throat depth 500 mm, dimensions: 390x195x200 (h) cm, weight: 9900 kg Rcjdpfewn Hfcox Afgeh

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder, in good condition. Device features: - Schröder MHSU shear - Cutting capacity: see nameplate, up to 3mm steel; significantly more for aluminum - Working length: just over 2 meters - Manual backgauge approx. 750 mm / a 1000 mm backgauge is equipped with digital display - Side/angle stop - Extension arm up to 2 meters - Reversible blades - Cutting gap lighting - Sheet metal chute - Foot pedal - Weight approx. 1.3 t We also have other machines available, such as the Schechtl MAX 200 – 2.5mm, or Schechtl MA 200 – 2mm and HA series, Schröder AKV 2mm, KSV 1.5mm, and KS 1mm, as well as folding machines and shears by RAS, etc. The current net new price is approximately 25,000 EUR. You will receive an invoice with VAT shown separately; VAT is included in the invoice amount. Shipping can be arranged if requested. Forklift available on site. Free loading as shown in the pictures. Viewing and test run possible by phone appointment. Payment in cash upon collection. If there is anything else I can assist you with, please give me a short call – thank you. Collection should take place within 8 days after the end of the auction. Rcsdoy R Efaepfx Afgsh Location: 97249 Eisingen (3 minutes from the motorway) Item number Schröder MHSU 2m 3mm 260511

Condition: used, functionality: fully functional, Year of construction: 1966, Mechanical plate shear Manufacturer: Scharringhausen, Type: KS/S 2.100x5 Year of manufacture: 1966 Technical data Manufacturer: Scharringhausen Type: KS/S-III Year of manufacture: 1966 Sheet width: 2,100 mm Sheet thickness: 5.00 mm Horsepower: 15 Voltage: 380 Rounds per minute: 1450 Dimensions: L 3,700 x W 1.20 x H 1.60 m Weight: approx. 2 tons Equipment - Wiring diagram Rsdpfxoz Ayyyo Afgoch - Foot pedal All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1996, sheet width 1350 mm plate thickness 3 mm cutting angle 1° 30' no. of strokes 35 Hub/min table height 850 mm rear stop 450 weight of the machine ca. 1200 kg dimensions ca. 1700 x 1650 x 2000 mm Rodpfx Aowngqfjfgjch manually operated back gauge 450 mm working lifght included safety gate included

Condition: excellent (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schechtl, in absolutely top condition! Device features: - Shear model: MSB 200 - Cutting capacity: see nameplate, up to 3mm steel – significantly more for aluminum - Working length: just over 2 meters - Manual back gauge: 500 mm - Side / angle gauge - Foot pedal operation - Weight approx. 1.3 t - Schechtl MSB 200 - Bending length: just over 2 meters - Sheet thickness (steel): 3 mm – significantly more for aluminum and zinc - The machine was used extremely rarely, approx. 1-2 times per month for thin sheets at a lamp manufacturer - It shows hardly any signs of use; this condition is rare - The total price is less than half the current new price – the price list is from last year! If you have any questions, feel free to call briefly. We have this set twice, as well as other models such as the Schechtl MAX 200 (2.5mm) or MA 200 (2mm). The current net new price for both machines can be seen in the photos. Rsdpfxewfzzte Afgech You will receive an invoice with VAT shown separately. I can arrange shipping by freight forwarder if desired; a forklift is available. Free loading as shown in the pictures. Inspection and testing are possible by prior telephone arrangement. Payment in cash upon collection – if there is anything else I can do for you, please call me briefly – thank you. Collection should take place within 8 days after the end of the auction. Item number:

Year of construction: 2014, condition: used, Heizinger plate shear B13-3100 Hydraulic plate shear – Heizinger Type/Model: B13-3100 Condition: Used Year of manufacture: 2014 Technical data: Max. cutting length: 3,100 mm Max. cutting capacity in steel: 13 mm Reach: 250 mm Cutting angle: approx. 2.1° Drive: Hydraulic Rsdpfx Aj Agf Urofgjch Inquiry item: Transportation costs will be provided in a customized quote.

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Machine No.: 11644-0995 Year of manufacture: 1995 Condition: Good, operational condition TECHNICAL DATA Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Number of cuts per minute: 35 Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Rcedpfxjydk Acs Afgeh Weight: 1,255 kg EQUIPMENT/ACCESSORIES  Angle stop with ruler  Double-edged blades  Foot switch  Documentation

Condition: used, Year of construction: 1986, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1300 kg Equipment: - manual backgauge, with analog display * Adjustable from the front Rcodpsyv Nn Asfx Afgoh * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, functionality: fully functional, Year of construction: 1994, actuation type: hydraulic, cutting angle (max.): 1 °, stroke rate (min.): 6 1/min, stroke rate (max.): 10 1/min, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, input voltage: 380 V, oil tank capacity: 130 l, overall weight: 22,000 kg, Equipment: CE marking, safety light barrier, RICO HGR 606 hydraulic guillotine shear For sale: a RICO HGR 606 hydraulic guillotine shear (manufactured by Tomas Castro Silva, Lda., Portugal), year 1994. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Machine number: 823 Cutting length: 6,000 mm Cutting capacity: 6 mm carbon steel / 4 mm stainless steel Cutting angle: 1° Cutting rate: 6-10 strokes/min 31 hold-down clamps (15mm pitch) Programmable back gauge with electronic encoder, 0-1,000mm range (RD 12/15 kit) Rcodpfx Aoz Hk R Isfgsh Hydraulic oil tank: 130 l Weight: approx. 22,000 kg Main motor: 15 HP — Back gauge motor: 0.5 HP Power supply: 380V Safety: light barriers and safety relay, with a formal safety compliance assessment (RD 1215/1997) already carried out, and the corresponding safety kit already installed and operational. For technical questions or to arrange a visit, please contact us by email – we are happy to answer any questions or send further photos/videos of the machine in operation.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, sheet thickness (max.): 12 mm, overall weight: 8,000 kg, working length: 3,000 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Rcedpfx Asz Nnvbsfgsh Max. sheet thickness, steel: 12 mm Tensile strength, steel: 450 N/mm² Working length: 3,000 mm Max. feed rate: 88 mm/s Performance data Power: 22 kW Tool weight: 31.5 kg MACHINE DETAILS Power: 22 kW Input voltage: 380 V Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,600 x 2,100 mm Total weight: 8,000 kg External Reference: Zafa - Lot 12