Used Hydraulic Shear for sale (15,679)

Condition: good (used), functionality: fully functional, Year of construction: 2009, Expected in approx. 1 month: Used 4-meter CNC guillotine shear by Safan Model: M Shear 430 6 Lelhcdoycwalsw Hehb Capacity: 4300 x 6 mm High hold-down system Return to sender system Year of manufacture: 2009 Images shown are of another identical machine.

Condition: used, functionality: fully functional, Year of construction: 2014, Used 4-meter guillotine shear from Shandong Sanxin (China) Model: GS 4108 Capacity: 4100 x 8 mm Electric back gauge with Delem control Weight: 7,400 kg Lhelhjycv Ubjcdw Hsb Year of manufacture: 2014

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW Lhelhcdwjycxgmo Heb weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: good (used), Year of construction: 2020, CNC ESA blade clearance adjustment via CNC, manual cutting angle adjustment, thin sheet support. Year 2020. Lelhcdweyanqij Hehb

Condition: used, Year of construction: 2009, Technical details: sheet width: 3000 mm plate thickness: 6 mm Ljlhcdwsybbz Do Hjhb stroke: 102 mm back gauge: 1000 mm total power requirement: 11 kW dimensions of the machine ca.: 3900x1950x1700 mm weight of the machine ca.: 5650 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 3100 mm Range back gauge 1000 mm Min. cutting angle 0.5 ° Max. cutting angle 3.5 ° Number of sheetholders 17 Min. number of strokes/min. 6 Max. number of strokes/min 30 Min. blade clearance 0.1 mm Lslhcdeyag Uaow Hehb electric powerd back guage with elgo "go-to" controller plate following system at back guage

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, Hydraulic guillotine shear HACO HS 4013 capacity : 4000mm x 13mm Lolhcjyag Tiodw Hohb electric powered back guage

Condition: good (used), functionality: fully functional, Year of construction: 1998, Used 3 meter guillotine shear from Ermaksan Lhelhcjyabqpedw Hsb Model: MGM 3100 8 Capacity: 3100 x 8 mm Refurbished electric backgauge Year of manufacture: 1998

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Lhelhcdsuddh Ajw Hob Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Year of construction: 1980, condition: used, sheet width / mm plate thickness / mm distance between columns / mm Hydraulic guillotine shears Year of construction: 1980 Brand: Mengele Width up to: 3000mm Sheet thickness CS: 24mm Sheet thickness SS: 13mm Lhelog Twmhohcdw Hsb Stop max.: 1m Weight: 34 tons

Condition: used, Year of construction: 1980, sheet width 3,5 mm cutting width 3050 mm weight of the machine ca. 4,5 t Lelhcdwoyacpme Hshb

Condition: used, LVD Shear Lslhcdwex Tqtbj Hjhb Type HST C-10/31 Capacity 3000 x 10

Condition: used, Year of construction: 1990, Control Siemens Simatic OP17 weight 4,8 t cutting width 2550 mm Ljlhcex U A R Isdw Hshb sheet width - max. 4,5 mm

Condition: used, Year of construction: 1999, weight of the machine ca. 16 t sheet width 3150 mm sheet thickness - max. 16 mm sheet width - min. 1,6 mm Lolex U A Hvjhcdw Hehb voltage 400 V range - high tensile 3950x2475x2520 mm

Condition: good (used), Year of construction: 1982, sheet width . mm working width 4500 mm Ljlhcsq Dta Ijdw Hohb plate thickness . mm 8mm distance between columns . mm

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Siemens achteraanslag en snijhoekverstelling 2 voorste steunpunten van 3 meter Handmatige afstelling van de messpeling Instapbeveiliging aan de achterzijde Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Lhelhcdsv Taiasw Hjb Backgauge: 1000 mm Siemens Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Lhjlhcetvb Iusdw Hob Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: used, Year of construction: 1980, Technical data: Max. sheet width: 2500 mm Max. Sheet thickness: 8 mm Lhjlhcotvfzcjdw Hsb Weight, approx.: 6400 kg

Condition: new, Year of construction: 2025, overall weight: 990 kg, opening width: 788 mm, total width: 920 mm, total length: 2,072 mm, cutting force: 40 t, pressure: 220 bar, operating pressure: 220 bar, warranty duration: 12 months, Hydraulic car body removal shears Weight: 990 kg Lhjlhcdwex Hwbls Heb - Total length: 2072 mm - Width: 920 mm - Rotation: 360 degrees - Cutting power: 40 tons - Oil flow: 50-70 l/min - Oil pressure: 220 bar - Excavator weight: 18-24 tons

Condition: good (used), Year of construction: 1992, Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine Lhslhcex Srlpsdw Hjb -Reinforced steel shear: hydraulic -Number of rods: Ø 12mm/8 pieces, Ø 16mm/4 pieces, Ø 35mm/1 piece -Foot switch: 1 -Dimensions: 1230/680/H640 mm -Weight: 419 kg

Condition: used, Year of construction: 1998, gebraucht 1998 090148 prompt, Zwischenverkauf v Lhslhcsyackwjdw Hjb Belgien 24900 € 1 3100 mm 6 mm 0.5 - 3.5 ° 9,5 kW 950 mm 4070 mm 2330 mm 3400 mm 1850 mm 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity

Condition: new, Year of construction: 2025, neu 2025 090132 prompt, Zwischenverkauf v Türkei 47500 € 798.38 € 1 41800 € 3100 mm 6 mm 4 mm 50 mm 15 1/min 1.5 ° 16 14 to 1000 mm 200 mm/s 15 kW 200 l 2 Stk. 865 mm 500 mm 3515 mm 4110 mm Lhjlhcjwiqyyjdw Hsb 2200 mm 3700 mm 2100 mm 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules WE HAVE MORE THAN 850 REFERENCES!

Condition: used, Year of construction: 2008, sheet width 3200 mm plate thickness 6 mm distance between columns 3200 mm back stop - adjustable 20 - 600 mm dimensions ca. 4010 x 1610 x 1620 mm engine output 7,5 kW Control eView weight of the machine ca. 7,2 t Lhjlhcdjqva Rzow Hjb CNC swing cut panel shears electrical components from Siemens, ABB and Mitsubishi, Pilz safety control hydraulic components made in Italy 3 support arms and 1 angle stop Ball rollers in the table Operating instructions available

Condition: good (used), Year of construction: 2008, sheet thickness (max.): 13 mm, cutting length (max.): 4,160 mm, DENER Hydraulic Shear 4100x13mm DMMH.4113 Brand: Dener Model: DMMH NC 4113 Year: 2008 Standard Control: Dener HT 071 Cutting Length: 4,160 mm Maximum Cutting Thickness: 13 mm Lhjlhcdwswi Snxs Hjb Cutting Inclination: 2º Number of Hold-Downs: 19 Motor Power: 30 kW Cuts/min.: 8 Manual Lubricator *Shear under inspection. Blades have been removed for grinding. Hold-downs have been removed for replacing seals and gaskets. Delivered fully inspected and with a 6-month warranty.

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 6 mm rear stop 10 - 750 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9 / 14 Hub/min total power requirement 7,5 kW dimensions of the machine ca. 3750 x 1600 x 2450 mm weight 4800 kg Features: - Electro-hydraulic, slide-guided sheet metal guillotine shears - Front control panel, front left - With electro-hydraulic cutting angle adjustment - With manual cutting gap adjustment, from the front (eccentric) - Electric motor rear stop 10-750 mm (ball screws) - With analog position display + hand wheel for fine adjustment - 1x side stop - 3x support arms Lslhjw S Nknjcdw Hohb - 1x freely movable foot switch - Front finger guard - Operating instructions (PDF)