Used Hydraulic plate shears for 10-13mm plate thickness for sale (100)

Condition: used, Year of construction: 2012, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 9 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm very well maintained condition rarely used (!!) Equipment: - electro-hydraulic & slide-guided guillotine shears - including HACO NC machine control SP 9 (as good as new) * pre-selected positioning of the rear stop Dqoryb * digital display of the actual value * electro-hydraulic cutting angle setting with digital display * programmable retraction from the rear stop * programmable cutting length limitation * 1x emergency stop switch - electro-motorized rear stop, on recirculating ball screws - manual cutting gap adjustment, adjustable from the front - finger guard at the front - 1x side stop .. 1,000 mm - 4x front support arms - rear sheet metal slide - 1x freely movable foot switch - operating instructions (PDF)

Condition: used, Year of construction: 1985, sheet width 3050 mm plate thickness 12 mm distance between columns 3400 mm cutting angle adjustment 0,5 - 3 mm cutting gap adjustment manuell, beidseitig back stop - adjustable 1000 mm angle stop 1000 mm length in total ca. 3850 mm length in width ca. 2050 mm Total height ca. 2200 mm weight of the machine ca. 8,8 t engine output 22,5 kW Cutting angle adjustment 0.5 - 3 mm manual cutting gap adjustment, on both sides motorized backgauge 1000 mm, operated from the front, fine adjustment via handwheel handwheel angle fence 1000 mm, 2 support arms Stop rail can be folded up. Cqs2Gtc3Mg very well-maintained machine, was rarely used

Condition: new, Sheet width 3100 mm sheet thickness 10 mm cutting angle 2 ° Hold down 14 pieces Stroke rate 13 strokes/min throat 350 mm Oil capacity 260 l Control CYBELEC CybTouch 8 Total power requirement 22 kW Machine weight approx. 10.550 kg space requirement approx. 4000x2250x2050 mm Equipment: - Hydraulic swing cut plate shear - touch screen controller with digital display for backgauge - automatic cutting gap adjustment via controller - backgauge control 1000 mm travel with ball screws - Swing cut machine with cutting gap adjustment - 2 backgauge arms - 1 side stop - light barrier behind the machine - cutting length limitation Cvn88O0Obp - cutting line illumination - chrome steel knives - ball rollers in the table - hinged finger guard with limit switch - foot switch - CE-sign / declaration of conformity - Operating instructions in German

Condition: new, The models from the KHT M NC series are built under a swing-beam design. The cutting bar is guided in a pivot bearing anchored in the machine body making cuts very straight without the risk of upper and lower blades jamming. The robust back gauge precisely positioned via the ESTUN 21 NC controller. N2Wikwm3

Condition: refurbished (used), AMADA PROMECAM shears Type GPS 1230 Capacity 3000 x 12 Cylinder seals changed Blades sharpened Udt07Oknwf Sheet metal press seals replaced

Condition: used, Year of construction: 1990, sheet width 3050 mm plate thickness 12 mm distance between columns 3100 mm table height over floor 900 mm cutting angle adjustment 0,5 - 3 ° no. of strokes 6 - 13 Hub/min back stop - adjustable 1000 mm down holder 18 St oil volume 350 l total power requirement 22,5 kW weight of the machine ca. 8 t dimensions of machine L x W x H 3,96 x 2,10 x 2,22 m - with adjustment of cutting gap - Accessories: electr. back gauge, spare knives Cjwnlzx2Nk

Condition: used, Year of construction: 2005, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14.0 Stück no. of strokes 9.0 - 13 Hub/min oil volume 310 ltr. cutting angle 2.0 ° throat 350 mm table height 900 mm Control ELGO total power requirement 22.0 kW weight of the machine ca. 12200 kg range L-W-H 4100 x 2300 x 2235 mm New price ~ 55.000 euros Special price on request very well maintained condition (!!) Equipment: - heavy / robust electro-hydraulic swing cut shears - NC ELGO digital control unit, model P9521 * Back stop preselection - X axis - electro-motoric back stop, travel = 1.000 mm (X axis) * on ball screws * automatically folds up at max. travel, for longer cuts - 1x side stop with mm scale - 2x front support arms with mm scale - ball rollers in the front support table - manual cutting gap adjustment, by hand lever (eccentric) - foldable finger guard, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system Ck0Jwcgb8U - rear sheet metal slides - rear safety device (light barriers) - 1x freely movable foot switch - operating instructions (PDF)

Condition: new, CNC Hydraulic guillotine shear New machine Manufacturer:UMS Type : PRO. 3100 x 13 CNC Technical data: Cutting length 3100 mm sheet thickness (42 kgf/mm) 13 mm sheet thickness (70 kgf/mm) 8 mm cutting angle: 0,5 - 3 mm 15 pcs. blank holder Cybelec Cybtouch 8 monoblock: steel welded construction Automatic cutting gap adjustment K8R8Ke8E Table with ball rollers High quality, hardened and ground upper and lower knives Light sensor for front side (sheet guide) Adjustable cutting stroke 1 m support arm with scale 1 m support arms ( 2 pieces ) Rear light sensor ( 10-16 mm sensor distance) Cutting line illumination Motor 30 kW throat 180 mm Cutting speed 7/13 Original Rexroth valves Rexroth hydraulic system Rexroth pump, original Eckerle Electrical parts from Siemens Operating instructions German Table height 900 mm Overall dimensions 3840x2830x2180 (WxLxH) Total weight 11.000 kg plus commissioning, training and transport Delivery time from order approx. 70 days

Condition: not inspected (used), Year of construction: 1990, overall weight: 10,000 kg, capacity 4000X10MM electric stops D7U93N0

Condition: good (used), Year of construction: 1992, back gauge: 1,000 mm, sheet thickness (max.): 10 mm, cutting length (max.): 3,050 mm, foot switch motorized arrester behind cutting angle adjustment Technische Daten / technical details: C0Faxaborw Schnittleistung / max. cutting capacity 10 mm max. Schnittlänge / max. cutting length 3050 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 9500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, sheet length: 3.200sheet thickness: 10cutting area width: 3200total power requirements: 15weight approx.: 7700messurements (LxWxH): 3800 x 1820 x 1920 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Cmj8Ipb8Og Auto-cutting (Flying cut)

Condition: like new (used), Year of construction: 2001, sheet thickness steel (max.): 10 mm, cutting length (max.): 3,000 mm, Axial Hydraulic Shear model CP 1030, 3050 x 10mm, pendulum cut, motorized stop, installed power 15Kw, weight 9 tons. Cu0D9Zlnyw

Condition: used, Year of construction: 2009, sheet width 3200 mm plate thickness 10.0 mm thickness at "Niro-steel" 5.0 mm down holder 14 Stück no. of strokes 10 Hub/min cutting angle 1 ° 50 control ESTUN E20 work height max. 800 mm oil volume 215 ltr. total power requirement 15.0 kW weight 7500 kg range L-W-H 3950 x 2325 x 1850 mm well-maintained condition (!!) current new price approx. 35.000 euros special price on request Equipment: - NC electro-hydraulic swing beam shear - including ESTUN NC control unit "E20", front left - NC electro-motorized back stop * on ball screws * positioning accuracy 0.1 mm Cgz8R0Nf3Q * travel speed 80.0 mm/sec. - manual / lateral cutting gap adjustment (eccentric) - 1x side stop, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - front light barrier (finger protection) - rear sheet metal slide - 1x freely movable foot switch - 2x EMERGENCY OFF buttons at the front

Condition: good (used), Technical data: Cpmvj8L9Sg maximum cutting width: 4050 mm maximum cutting capacity steel St40: 13 mm maximum cutting capacity stainless steel: 8 mm Cutting gap adjustment cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 4600 x 2400 x 2450 mm Weight: approx. 20 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 1984, Functionality: fully functional, machine/vehicle number: 65530, back gauge: 750 mm, cutting length (max.): 3,050 mm, total width: 1,850 mm, total height: 2,030 mm, total length: 3,510 mm, overall weight: 4,800 kg, table height: 900 mm, Max. Cutting capacity at 45/70kp/mm²: 6/4 Max. Pressure: 200bar Cutting angle adjustment: 0.5-3 degrees Number of strokes at cutting angle: 13/22 max./min Dqngsp Number of hold-down devices: 18 pcs. Main motor: 7.5 kw The complete machine documentation is available.

Condition: used, Year of construction: 1995, Technical details: sheet width: 3040 mm plate thickness: 12 mm distance between columns: 3030 mm back gauge: 1000 motorisch mm cutting angle: 3° / 43° ° control: Cybelec DNC 10 G interface: RS232 cutting gap adjustment: ja mm down holder: 17 Stück Dqoosp total connected load: 23 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 4,0 x 2,2 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m

Condition: new, sheet length: 4.200sheet thickness: 13,0cutting area width: 4200total power requirements: 18,5weight approx.: 13800messurements (LxWxH): 4650 x 2270 x 2000 T7Rjoffh Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: used, Year of construction: 2013, sheet width 3100 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 mm cutting angle 2.0 ° down holder 14 Stück no. of strokes 13 - 18 Hub/min back stop - adjustable 1000 mm Control ELGO P40T column arm 250 mm oil volume 265 l engine output 22,0 kW weight 9600 kg range L-W-H 4700 x 2300 x 2200 mm Dqkkeb New price from 56.000 euros Special price on request Furnishing: - electro-hydraulic sheet metal plate shears "oscillating cut" - ELGO NC control - model "P40T Touch", front left control panel - CNC electro-motorized back gauge, with ball screws * including retraction function selectable * Fold-out function for sheets longer than 1,000 mm - manual cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x support arms, with T-slot and mm scale - 1x freely movable foot switch with emergency stop button - Ball rollers in the support table - front finger protection - FIESSLER rear protection device - original instruction manual * Machine link: ?machineno=1008-9325300

Condition: new, sheet length: 3200sheet thickness: 13,0total power requirements: 18weight approx.: 9,2messurements (LxWxH): 4000x1900x2350Our strong brand KKI CNC TAFELSCHER sliding block design Model 3210 has everything you need for perfect cutting. CNC slotted table shears KKI Thanks to durable and durable mechanics and hydraulics, precise backgauge with Ball screw and user-friendly CNC control are KKI guillotine shears highly effective production machines. Shears for sheet thicknesses from 6 mm to 20 mm and Cutting lengths of 3 to 6 m in length are part of our standard portfolio. Of course are on customer request also higher sheet thicknesses and cutting lengths possible. The guillotine shears owe their long life to their particularly robust construction with fully welded frame. The entire machine body, the cutting beam and the Backgauge are insensitive twisting and deformation and thus enable highest cut quality. By entering the sheet thickness and material type, the CNC control calculates Fully automatically the required cutting angle and kerf. Our strong brand KKI CNC TAFELSCHER sliding block design Model 3210 has everything you need for perfect cutting. Technological advantages     Fast and precise cuts     Stable, durable frame construction     Automatic kerf adjustment and angle adjustment     Easy handling     Low maintenance costs     High safety standard     Use of components from well-known manufacturers     Low unit costs Technical specifications: Sheet thickness: 10 mm Cutting length: 3,280 mm Cutting angle: 0.3 - 1.8 ° Backgauge: 1,000 mm via CNC Motor power: 11 kW Length: 3,800 mm C0Ggegie Width: 2,050 / 2960 mm Height: 2,150 mm Weight: 8,650 kg • Stage execution • CNC Control - backgauge - Cutting angle - kerf - Cutting length • Ball screws for the back gauge • balls in the table • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm • Cut line lighting • Foldable up to 1,000 mm finger protection Incl. pneumatic sheet holding We have many references!

Condition: used, Year of construction: 2003, sheet width 3050 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm cutting angle adjustment 0,5 - 2,5 ° cutting gap adjustment 0,05 - 1,0 mm back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 14 Stück strokes per minute 12 - 25 oil volume 300 Liter 0 max. 300 bar voltage 400 V main drive 18,5 kW weight of the machine ca. 10.000 kg. dimensions of the machine ca. 4080 x 2350 x 2060 mm maintained condition (!!) was serviced annually by the manufacturer TRUMPF / EHT Furnishing: - Baffle-guided metal sheet shears with automatic cutting angle adjustment - Machine frame is an all-steel welded construction * Side stands are connected to the machine table - EHT / ELGO CNC control model P-9724, front left control panel * for backgauge adjustment and program selection (4 axes) - Automatic cutting angle adjustment - Automatic cutting gap adjustment - Automatic cutting gap compensation - Support table with ball rollers * There are recessed grips between the table sheets - front, hinged finger protection - hydraulically acting sheet metal hold-down devices - rear protective device (protective grille + light barriers) Ce0Aod7L78 - 1x freely movable foot switch - original operating instructions Special accessories included: - 1x EHT extra long side stop with mm scale & feet - 1x EHT extra long support arm with mm scale & feet - 2x EHT additional support arms with mm scale * Machine link: ?machineno=1008-9325292

Condition: new, sheet length: 3120sheet thickness: 13,0total power requirements: 30weight approx.: 13500messurements (LxWxH): 3850x3160x2000 Bd3Nkjusoi

Condition: new, sheet length: 4100sheet thickness: 13,0total power requirements: 30weight approx.: 15500messurements (LxWxH): 4120x2240x2235 Our strong brand KK Kletzer                    TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  Biw9Lrgec durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 13 mm  Cutting length: 4,100 mm Cutting angle: 2.3 °  number of hold-downs 19  Backgauge: 1,000 mm via CNC  Motor power: 30 kW  Strokes per minute 8  Projection: 50 mm  Length: 5120 mm  Width: 2240 mm  Height: 2235 mm  Weight: 15500 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 4.900, -  We have many references!

Condition: new, sheet length: 4065sheet thickness: 13,0total power requirements: 30weight approx.: 18000messurements (LxWxH): 4850x3160x2360 Dwgi7Q

Condition: new, sheet length: 6125sheet thickness: 13,0total power requirements: 30weight approx.: 35500messurements (LxWxH): 7090x3185x2650 Bd0Ikh39Sx

Condition: new, sheet length: 3.200sheet thickness: 10,0total power requirements: 11weight approx.: 8100messurements (LxWxH): 4000 x 1950 x 1900 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Bdf20Xttvl Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)