Used Hydraulic Scissor for sale (16,917)

Condition: used, Year of construction: 2016, REF: MM6451 1 x Edmolift UK Limited TL1000XB hydraulic scissor lift. Serial no. 119233. Date of manufacture – 2016. All equipment to be removed from the factory by the Buyer. Fpedszcb Rzopfx Ahnoh

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm Fpedpjl Nbqcofx Ahnsh stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Hydr. scissor lift table TREPEL - L. A. VAN EIJLE & Co. Year of construction approx. 1980 Load capacity approx. 5 ton. Platform size 1700 x 1100 mm Lift max. 515 mm Lower table height with rail rollers 535 mm Table height without rail rollers 480 mm Table height raised with rail rollers max. 1050 mm Table height raised without rail rollers max. 995 mm Travel speed rail trolley approx. 8.5 meters/min. Motor power 4 kW Mains connection 400 Volt, 50 Hz - Manual button for up and down on the cable - Safety limit switch - Hydraulics with tank mounted in the undercarriage - Lifting scissors with two lifting cylinders - The table could be moved on rails, 4 rollers on the base frame, Ø 200 mm - Rail rollers driven by SEW geared motor with chain Space requirement L x W x H 2070 x 1350 x 1050 mm Own weight approx. 1.3 tons. good condition Fjdpfx Ahsd I Nrpjnoph

Condition: ready for operation (used), Hydraulic Self-Propelled Scissor Lift Simon Aerials (Cork) SH 120 E, Used Equipment Manufacturer: Simon Aerials (Cork) Model: SH 120 E Year: 1993 Minimum height: 1.7 meters Maximum height: 10 meters Load capacity: 700 kg Load capacity with extended platform: 227 kg Fpsdpfx Ahsu Hitfjnoh Maximum tilt angle: 3.5 degrees Electric Drive Overall dimensions: 4000 x 1800 x 2860 mm Weight: 4440 kg

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2107-BE-042286-021, Offer 26108 Technical specifications: - Operation via wired hand-held remote control - Load capacity: 2000 kg - Platform size: 2500 x 820 mm - Minimum lift table height: 205 mm Fodpfjy Tl Hcox Ahneph - Maximum lift table height: 990 mm - Lift stroke: 785 mm - Lifting speed with / without load: 25 / 15 mm/s - Lowering speed with / without load: 25 / 20 mm/s - Hydraulic drive: 400 V / 2.2 kW - Space required: approx. W 2580 x D 840 x H min. 250 mm - Weight: approx. 270 kg

Condition: good (used), Year of construction: 2022, machine/vehicle number: 2208-BE 044486-029, Offer 26105 Technical data: - Operation via hand-held remote control with cable - Load capacity: 2000 kg - Platform size: 2500 x 820 mm - Min. lifting table height: 205 mm - Max. lifting table height: 990 mm - Lifting stroke: 785 mm Fpsdpfx Ahjy Tlz Tonsh - Lifting speeds with/without load: 25 / 15 mm/s - Lowering speeds with/without load: 25 / 20 mm/s - Hydraulic drive: 400 V / 2.2 kW - Space requirement: approx. W 2580 x D 840 x H min. 250 mm - Weight: approx. 270 kg

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Fpedpfx Ahsyw Ua Tjneh Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Set includes: - Scissor lift - Hydraulic power unit - Controls (remote) 🚚 Shipping: - Pallet shipping - Local pick-up possible

Condition: good (used), Gruse ELS 2-13-9 Hydraulic Scissor Lift Table The Gruse ELS 2-13-9 is a stationary scissor lift table from the ELS series, designed for a load capacity of up to 2000 kg. It features a robust tubular scissor construction and is engineered for use as an assembly or loading table. Features and Equipment Safety Features: The lift table is equipped with a perimeter safety contact strip (safety edge) on the platform, hose rupture valves mounted directly on the cylinders, and electric check valves. Construction: It features sturdy upper and lower frames as well as maintenance-free scissor bearings. Operation: Control is provided standardly via a "dead man" handheld push-button with an emergency stop function. Load Capacity: 2000 kg. Platform Dimensions: 2000 x 1000 mm. Fpodpfjy Nxl Djx Ahnoh Effective Lift Height: 1300 mm. Closed Height (retracted): approx. 200 mm. Total Height (extended): approx. 1500 mm. Lifting Time: approx. 18 seconds. Drive System: 400 V electro-hydraulic unit with an output of approx. 2.3 kW. Weight: 800 kg. New Price: €9,175.00 You can find other scissor lift tables in various sizes—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2106-BE 042110-047, Offer 26106 Technical specifications: - Operation via hand-held remote control with cable - Load capacity: 2,000 kg - Platform size: 2,500 x 820 mm - Minimum lift table height: 205 mm Fpedpfx Ahjy Nzfyoneh - Maximum lift table height: 990 mm - Lift stroke: 785 mm - Lifting speed with / without load: 25 / 15 mm/s - Lowering speed with / without load: 25 / 20 mm/s - Hydraulic drive: 400 V / 2.2 kW - Required space: approx. W 2,580 x D 840 x H min. 250 mm - Weight: approx. 270 kg

Condition: good (used), Year of construction: 2009, Technical data: - Operation via hand-held wired remote control - Load capacity: 2000 kg - Platform size: 2500 x 820 mm Fsdpfx Aey Nzcrohnsph - Minimum lift table height: 205 mm - Maximum lift table height: 990 mm - Lift stroke: 785 mm - Lifting speed with / without load: 25 / 15 mm/s - Lowering speed with / without load: 25 / 20 mm/s - Hydraulic drive: 400 V / 2.2 kW - Required floor space: approx. W 2580 x D 840 x H min. 250 mm - Weight: approx. 270 kg

Condition: good (used), Year of construction: 2022, machine/vehicle number: 2210BE044456-036, Offer 26103 Technical data: - Operation via hand-held remote control with cable - Load capacity: 2000 kg - Platform size: 2500 x 820 mm - Minimum lift table height: 205 mm - Maximum lift table height: 990 mm - Lift stroke: 785 mm - Lifting speed with / without load: 25 / 15 mm/s - Lowering speed with / without load: 25 / 20 mm/s - Hydraulic drive: 400 V / 2.2 kW Fpsdpjy I S Agjfx Ahnjh - Required space: approx. W 2580 x D 840 x H min. 250 mm - Weight: approx. 270 kg

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Fpjdohlnznspfx Ahnsh Platform size 2000 x 1200 mm Lift max. 1280 mm Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: used, Electro Hydraulic Scissor Fork Lift Pallet Truck Scissors lift truck, pallet lift truck TOYOTA / BT type HTH 10 E serial no. 481795 year of manufacture 2005 lifting capacity 1000 kg Fpodpfxsg D H Ivj Ahneh lifting height max. 800 mm overall height lowered 85 mm Fork length 1190 mm - electric lift via 12 volt battery - manual lift via hand lever as for lift truck - TOYOTA Industrial Equipment Europe SARL (Made in France) - long stroke hydraulic cylinder - with single roller - integrated charger (mains voltage 230 Volt, with cold appliance plug) own weight 140 kg good condition

Condition: good (used), Year of construction: 2003, machine/vehicle number: 42058, Offer 20223 Technical data: - Operation via hand-held remote control with cable - Load capacity: 1000 kg - Platform size: 1250 x 800 mm - Min. lift table height: 280 mm - Max. lift table height: 950 mm Fsdpfx Ajxdivyehnoph - Lift stroke: 670 mm - Hydraulic drive: 400 V / 1.1 kW - Required space: approx. W 1300 x D 900 x H min. 280 mm - Weight: approx. 150 kg - Mobile undercarriage

Condition: new, Year of construction: 2025, Genie GS3232 NEXT GENERATION E-Drive scissor lift with hydraulic outriggers, new, used - demo machines available Fpedpfx Aorqfn Ujhnoh

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, lifting height: 1,450 mm, load capacity: 1,000 kg, total length: 1,700 mm, total width: 760 mm, input voltage: 400 V, type of input current: three-phase, height adjustment type: hydraulic, operating pressure: 180 bar, We are selling a mobile lifting platform from Trepel, Wiesbaden, which was used for loading and unloading trucks. The platform is in very good condition and operates flawlessly. Viewing is possible by appointment. Fpedpsydc Dfofx Ahnsh

Condition: good (used), Saxon Bag Sealer Fsdpfx Ahov Dm Eponoph With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel 230 Volt Power Supply Price € 3,950

Condition: excellent (used), Ideal/EBA cutting machine! In excellent condition, available for viewing and testing at our location. Comes with an extra blade! Fodpfxoy Uhlqe Ahnoph

Condition: used, HYDRAULIC PRESS SMG Fpodpfx Ahjtndu Ueneh PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: good (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Fjdpfx Ahovgnr Asneph

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. Fedpfovgnhwjx Ahneph - Arm spreader. - Hydraulic pump.

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Fpedsvgnttjpfx Ahnjh - Hydraulic pump.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH hydraulic boom crusher, also known as a hydraulic rock crusher, is designed to deliver superior performance in demanding work environments such as quarries, mining operations, and recycling facilities. With its high impact force, it easily breaks down large-sized rocks and stones, making them suitable for the crushing line. This system allows large materials entering the crusher's bunker, especially in the initial crushing stage, to be reduced in size without direct human intervention. The hydraulic boom system, which can be controlled remotely, offers the operator maximum safety, comfort, and control. Vibration and noise levels are kept to a minimum, protecting both the operator and the equipment's lifespan. Thanks to its high-quality material structure, the CONSTMACH hydraulic boom crusher maintains its durability for many years and stands out with its easy maintenance and integration with different crushing systems. This system is an excellent solution for businesses seeking efficient, economical, and safe crushing. Hydraulic Boom Crusher Technical Specifications Crusher: CHB400 Weight: 350 kg Equipment Diameter: 68 mm Pressure and Flow Rate: 100-150 bar / 50-80 liters Installation Area: 700 m² Boom System Specifications Working Angle: 360° Maximum Reach Area: 9000 mm Material: S355J2 Motor Power: 18.5 kW Control Type: Radio-controlled and manual valve control Filters: OMT 25 microns Hoses: (R2) Bezek Fsdpfx Ahoxqgv Densph Why Choose CONSTMACH Hydraulic Rock Breaker? With years of experience in the industry, CONSTMACH prioritizes quality and safety at every stage of production. Our hydraulic rock breaker systems are designed to offer maximum efficiency and minimum maintenance costs. All parts are manufactured from high-strength steel to withstand heavy-duty conditions. Furthermore, we guarantee the uninterrupted operation of your business with our spare parts and technical service support. If you are looking for a durable, reliable, and high-performance crushing solution, the CONSTMACH hydraulic boom crusher is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: like new (used), Article description: 22 pcs. unused hydraulic motors M+S Hydraulic MT/B 315C/4 ----- Fpedpfx Aeyyyadohnsh Item condition: Unused stock item. Storage marks possible. Internal number: 26.310

Condition: used, Year of construction: 1990, functionality: fully functional, Lifting table with roller conveyor and hydraulic unit Fpjdsymz Sgepfx Ahnjh Manual control Lifting capacity: 5000 kg platform length: 6700 mm platform width: 1500 mm Overall height: 630 mm Maximum height: 2200 mm