Used Hydraulic single column presses 51-99t for sale (35)

Condition: used, Year of construction: 1977, pressure 063 t throat 250 mm stroke 8 - 100 mm no. of strokes 56 / 84 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 710 x 500 mm hole in the table 320 mm table height over floor 800 mm passage to the back 320 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 4,0 kW weight 4,1 t dimensions (W x D x H) 1,35 x 2,0 x 2,6 m year of manufacture 1964 installation of moving screen 1977 Dpsy72 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor for two speed, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual centralized lubrication, foot operation can be offered without or with putting into operation in given condition

Condition: ready for operation (used), Year of construction: 1999, Machine/vehicle number: 15914, PRESS RUNNER MACHINE TYPE: EPT63 YEAR BUILT: 1999 MACHINE NUMBER:15914 MACHINE DATA Pressing force: 630 KN Idle noise: 69.2 dB Drive power: 22+4 KW Cooling: Type air TYPE OEKA-R4/1.0 Operating pressure: 260 bar Oil quantity: 285 liters. Weight: 6000kg TRAVEL DISTANCE MEASUREMENT: Overtravel: 20mm Follow-up time: 90ms Blt3E2Uareu Safety distance: 180mm DIMENSIONS: Installation height max: 600mm Ram stroke max: 400mm Throat: 280mm Table height: 850mm Table width: 630mm Table depth: 500mm

Condition: good (used), Year of construction: 1981, pressure 63 t throat 280 mm stroke 160 mm Clxyf9U7I3 table surface area 560 x 500 mm ram surface 280 x 280 mm table height 860 mm column daylight B 125 x H 200 mm oil volume 360 l total power requirement 22 kW weight of the machine ca. 4 t dimensions of the machine ca. B 1,1 x T 1,75 x H 2,56 m - motorized depth stop in the cylinder - punching dampening - adjustable holding time in the UT - clamping pin clamping piece in the plunger - two-handed operation - footswitch - machine safe for hand inlay work The following work was carried out in-house: - Machine has been technically checked - Machine has been repainted - A current UVV test with braking time measurement is carried out before delivery

Condition: good (used), Technical data : Power 75 to Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm Saqog22Rev Ram adjustment 80 mm . new UVV-tested .

Condition: used, Year of construction: 1979, Installation height: 370 mm, Throat depth: 500 mm, Pressing force: 63 t, Hydraulic single column press MÜLLER type CD 63.12.22 Machine # 9804 Year of construction 1979 Technical data max. pressing force 63 t ram stroke 160 mm Installation height 370 mm Rkdvtir8Un throat depth 500 mm Table size 490 x 560 mm Table height 860 mm Overtravel 22 mm Overtravel time 70 ms Safety distance 112 mm Weight approx. 7.0 t Dimensions approx. 1800 x 1000 x 2700 mm With - Safety monitoring system SICK type 14 FGS acc. UVV - WANZKE gripper feed - Stroke adjustment - Cam switch unit - Linear encoder used

Condition: new, Year of construction: 2021, hydraulic press Dpfhs9

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm stroke 600 mm dayligth 700 mm table surface area 1120 x 700 mm hole in the table mm table height over floor 850 mm ram surface 700 x 700 mm feed down 300 mm/sec feed up 130 / 260 mm/sec feed under pressure 5 / 10 mm/sec oil volume 275 l total power requirement 7,5 kW weight of the machine ca. 7,3 t required space 1,6 x 2,0 x 3,7 m Vfuvu2Vm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, mechanical depth stop (motoric adjustable), controllable dependant on pressure/time and way, two-hand operation can be inspected in running condition in our warehouse - new control can be offeren on request

Condition: used, Year of construction: 2023, Press capacity: 60 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Rhljv Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 150 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1500 x 1400 x 2600 mm Weight of machine approx.: 3,5 ton

Condition: used, Year of construction: 1984, pressure 100 t throat 320 mm stroke 160 mm Bmdc0Fpn9O table surface area 850 x 550 mm dayligth 500 mm oil volume ca. 500 l ram surface 560 x 450 mm total power requirement 30 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 1,5 x 2,0 x 3,0 m Machine was overhauled in 2008 - Workroom enclosure with Sick light barrier - Large ram with ejector and pin clamp

Condition: new, Year of construction: 2024, Functionality: fully functional, The Garnet 5X machining center is a high-precision tool with 5-axis machining capabilities that allows parts to be machined with high quality and efficiency. Ideal for machine shops looking for an advanced solution for machining complex parts. It is used to perform milling operations, opening drainage channels, drilling, marking and cross-cutting on profiles. Cfa3Nmp

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Bk7Murdypf Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: used, pressure: 63 t distance between columns: 900 mm no. of strokes: ca. 75 Hub/min ram adjustment: 80 mm stroke adjustable from - to: 3-100 mm Table dimensions: 900 x 600 mm throat: 310 mm dayligth: max. 350 mm drive power: 11 kW voltage: 380/220/24 V S8V2Y3Cge frequency: 50 Hz operating pressure: ca. 150 bar oil volume: 500 l safety distance: 150 mm passage opening in table: 200 mm total power requirement: 11 kW weight of the machine ca.: 4,0 t space requirements of the machine approx.: L:1,8 x B:1,8 x H:3,7 m DIFFERENTIAL PATH PRESS HIGH SPEED PRESS - High-speed press, C-stand - Compressed air connection: approx. 5 bar Condition. Press is not under power, without switch cabinet, sale as is. - Documentation available i.D.

Condition: used, Year of construction: 1991, pressure 63 t throat 325 mm stroke 560 mm dayligth 700 mm table surface area 640 x 640 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 450 x 450 mm Fga3J9Xxc table height over floor 800 mm ram surface 560 x 560 mm oil volume 450 l total power requirement 15,0 kW weight of the machine ca. 7,0 t required space 1,2 x 2,0 x 3,1 m year of manufacture 1971 overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 2023, Press capacity: 100 ton Stroke: 400 mm B80Dpuvy Daylight: 500 mm Table surface area : 800 x 500 mm Slide area: 800 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 160 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1600 x 1700 x 2930 mm Weight of machine approx.: 5,5 ton

Condition: new, Year of construction: 2024, Functionality: fully functional, Profile machining center with CNC numerical control system, 4 axis that offers a wide range of solutions to its users by processing aluminum profiles of different sizes thanks to the spindle that can work at any angle between -90 / +90. It has been developed to perform special operations, on different profiles outside the standard ones, while simultaneously performing milling, dewatering, drilling, marking and notching operations on the profiles. It has high processing capacity 300 mm x 250 mm. Boaf8Urhj9K

Condition: new, Sheet metal forms Sheet metal forms Deep drawing moulds Hot aluminium & steel forging Automotive and spare parts Food packaging industry Electrical panels Industrial cooling white goods Construction & building Hair metal cutting dies Product Info: Izfuyw9 No pit required Steel construction body C-Channel home plate & ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Year of construction: 1993, Condition: used, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm oil volume l power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm year of manufacture1980 Modernization of control 1993 Bru0I2Xn permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: new, Year of construction: 2024, Functionality: fully functional, PRODUCT DETAILS Hydro-pneumatic movement Automatic return to the starting point of the operation. Centering system to ensure that the profiles are correctly seated at 45° mitre. Rivfy0Co Pneumatic clamps Pneumatic cutter change system.

Condition: new, Sheet metal cutting dies Sheet metal cutting dies Sheet metal forming moulds Hot forged brass Bk7Mr2Jf03 Deep drawing moulds Cold forged aluminium steel Automotive and spare parts White goods Industrial kitchen parts Industrial cooling parts Kitchen appliances Construction & building Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: new, Year of construction: 2024, Functionality: fully functional, PRODUCT DETAILS Dewatering machine with 3 motors. Motor selection according to the control panel. Independent motors for milling function. Safety clamping button for cutting operations. Bn7Ggs3Wi2G 5 mm milling cutters (3 units).

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Grhwx2Htc Cylinder remover by home plate

Condition: new, Year of construction: 2024, Functionality: fully functional, PRODUCT DETAILS - Automatic screw feeding. Rpwkb7Slsr - Automatic end of screwing cycle. - Safety switch to avoid accidental use. - Automatic clamping of the profile during screwing. - Average screwing speed: 1.7 sec/piece. - Automatic screwing with pressure clutch - Foot control for error-free screwdriving - Switch for special screw height adjustment - Profile reclining distance with adjustable support - Torque adjustment according to the screw

Year of construction: 2002, Condition: used, Used Rhodes 60ton hydraulic press for sale Four pillar hydraulic press for sale. Year/new: 2002 Nominal force: 63 tonnes Design pressure: 200 bar Bm9B9Qwfsd Maximum stroke: 250 mm Approach speed: 150 mm/s Pressing speed: 15 mm/s Return speed: 150 mm/s Maximum tool size: 800 mm x 800 mm Maximum top tool mass: 750 kg Mass of press: 7000 kg Number of lifting points: 4 Electrical supply 400-3-50 Pneumatic supply 5.5 bar Worson Die Cushion Type DDC 104 In stock and available for immediate delivery. Can quote for new hydraulic c, d and h frame presses. Free standing hydraulic press complete with hydraulic cushion.

Condition: new, Year of construction: 2024, Functionality: fully functional, Machine/vehicle number: 225/2402260011, compact machining center with parametric program templates developed to perform various drilling and milling operations on Aluminum and PVC profiles. Qhbkxe8

Year of construction: 2002, Condition: good (used), Used Rhodes 60ton hydraulic press for sale Four pillar hydraulic press for sale. Year/new: 2002 Nominal force: 63 tonnes Bdtqzn9Mzry Design pressure: 200 bar Maximum stroke: 250 mm Approach speed: 150 mm/s Pressing speed: 15 mm/s Return speed: 150 mm/s Maximum tool size: 800 mm x 800 mm Maximum top tool mass: 750 kg Mass of press: 7000 kg Number of lifting points: 4 Electrical supply 400-3-50 Pneumatic supply 5.5 bar Worson Die Cushion Type DDC 104 In stock and available for immediate delivery. Can quote for new hydraulic c, d and h frame presses. Free standing hydraulic press complete with hydraulic cushion.