Single Column Press - Hydraulic
MÜLLER CD 100.11.69

Name: MÜLLER CD 100.11.69
Brand: MÜLLER
Availability: InStock

Year of construction

1984

Condition

Used

Location

Schmölln

Single Column Press - Hydraulic MÜLLER CD 100.11.69

Machine data

Machine type:: Single Column Press - Hydraulic

Manufacturer:: MÜLLER

Model:: CD 100.11.69

Year of construction:: 1984

Condition:: used

Price & Location

Location:: Schmölln

Call

Details about the offer

Listing ID:: A16484846

Reference number:: 1010-938

Update:: 25.07.2025

Description

pressure 100 t
throat 320 mm
stroke 138 mm
Nwsdpfx Aet Dctrsiuok
table surface area 850 x 550 mm
dayligth 385 mm
oil volume ca. 500 l
ram surface 560 x 450 mm
total power requirement 30 kW
weight of the machine ca. 6,5 t
dimensions of the machine ca. 1,5 x 2,0 x 3,0 m
- Machine was overhauled in 2008
- Work area enclosure with Sick light barrier
- Installation height 580 mm
- without large ram with ejector and trunnion clamping piece
- Conversion of hydraulics to proportional valve
- Conversion of switch cabinet
- Electrical travel measurement, Siemens Soft-Start, touch panel

The following work was carried out in-house:
- Machine was technically inspected
- Machine was repainted
- Before delivery, a current UVV test with braking time measurement is carried out

Machine is safe for manual insertion work on the open mold

Seller

Registered since: 2013

83 listings online

Call

Send inquiry

Telephone & Fax

+49 34491... show

These listings may also fit your interest.

Listing

Toolholder Werkzeug- / Tool Package LK 5 36x BT 40

Oelde

7,700 km

Toolholder
Werkzeug- / Tool Package LK 536x BT 40

Call

Listing

Single Column Press - Hydraulic WMW Zeulenroda PYE 100 S1M

Germany

7,963 km

Single Column Press - Hydraulic
WMW ZeulenrodaPYE 100 S1M

Call

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm Nwodpfx Aievc Ax Njuok cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

See details

Listing

Band Saw - Automatic - Horizontal KASTO HBA 520 AU

Bühl

7,895 km

Band Saw - Automatic - Horizontal
KASTOHBA 520 AU

Call

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm Nodpfowm Rm Iox Aiujwk sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

See details

Listing

Single Column Press - Hydraulic DUNKES HZ 100

Plettenberg

7,721 km

Single Column Press - Hydraulic
DUNKESHZ 100

Call

Listing

Burbach

7,761 km

Welding robot system
Cloos

Call

Year of construction: 2011, condition: excellent (used), Cloos welding robot Qirox QRC 320 incl. control system V 6, stand base for vertical arrangement, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure amplifier 1 tilting and rotating table WPK 5000, load capacity 500 kg, 1 start pre-selection, 1 control unit for customer-supplied sliding door Nwodpfx Aisizwv Neuek Gas nozzle sensor, arc seam tracking, point editor System will be completely overhauled and serviced before delivery. A second station with another identical tilting and rotating table is possible.

See details

Listing

Germany

7,804 km

Vertical Turning Machine
HESSAPPDV 62

Call

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1000 mm swing diameter: 1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Nwsdpot Rmdzofx Aiuok Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed ??range I: 5 - 350 rpm. Speed ??range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis *

See details

Listing

Kirchheim bei München

8,144 km

Hydraulic press
DUNKESHZ 315

Call

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Nwedov Rwu Ujpfx Aiuek Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

See details

Listing

Double Belt grinding machine Weiz GmbH DBSM-3.500-4

Kürten

7,695 km

Double Belt grinding machine
Weiz GmbHDBSM-3.500-4

Year of construction: 2023, condition: new, We sell a new double belt grinder. The contact wheels can be purchased in different dimensions. Nedpok D Ex Tjfx Aiuewk Technical data: Weight: approx. 350 kg Electrical connection: see type plate of the respective drive motor Compressed air connection: 3 - 8 bar Noise level: > 85 dB(A) Contact wheels: max. Ø 350 mm x 110 mm grinding belts: max. 120 mm x 3500 mm length Suction connection: Ø 160 mm If you have any further questions, please do not hesitate to contact us!

See details

Listing

Eccentric Press - Single Column AMBOLD PEEV 40.4

Schmölln

7,995 km

Eccentric Press - Single Column
AMBOLDPEEV 40.4

Call

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm Nedpsb U Hwtjfx Aiuswk total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

See details

Listing