Used Ageo for sale (13)

Condition: used, Year of construction: 1970, pressure 1 t Stroke 315 mm Fgslhev Td Eroccqksd

Condition: ready for operation (used), Clamping force: 1000 kg Overhang: 150 mm Arbor diameter: 40 mm Table diameter: 170 mm Installation height: 300 mm Fgelszi A Tpjhccqkod Space requirement: 420 x 380 x 1500 mm

Condition: ready for operation (used), Year of construction: 1977, Pressing force: 1000 kg Stroke: 240 mm Overhang: 150 mm Table diameter: 180 mm Fslezi A I Tehccqkjgd 3 table cutouts: 16, 45 and 55 mm Space requirement: 600 x 420 x 1500 mm

Condition: ready for operation (used), Year of construction: 1969, Spindle bore diameter: 80 mm Bore: 15 mm Stroke: approx. 550 mm Overhang: 250 mm Folhcjzh Ibpocqkogd Table size: 300 x 370 mm Table cut-out: 85 mm Space requirement: 1000 x 800 x 2000 mm

Condition: used, Year of construction: 1971, pressure capacity max. 80 t Stroke 500 mm table surface area 960 x 810 mm spindle pitch 72 daylight between the columns 950 / 540 mm passage 640 mm machine weight ab. 4500 kg dimensions of the machine ca. 2,0 x 2,0 x 3,85 m Folhcovxwzkjcqkogd Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves different support frames

Condition: used, Year of construction: 1973, pressure 28 t distance between columns 510 mm dayligth 380 mm stroke 260 mm Folhsv Svc Toccqkegd weight of the machine ca. ca. 750 kg

Condition: good (used), Year of construction: 1987, Equipment:  Pressing force: 160 kN / 16 MPa  Spindle diameter: 60 mm  Spindle pitch per revolution: 32 mm  Clearance between columns: 410 mm  Max. clear height between table and ram: 270 mm  Table area: 410 x 280 mm  Weight: 335 kg Fjlhcey S Syaocqkjgd Condition: good, little use

Condition: used, Year of construction: 1960, pressure 10 t distance between columns 260 mm dayligth 210 mm Fgslhjwl N Saeccqkjd table surface area 275 x 260 mm

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Fslhccqowva I Hekogd Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Hand insertion safety – Pressing force up to 100 kN Throat depth: 210 mm Table size (W x D): approx. 500 x 400 mm Installation height with/without clamping plate: 300 mm Stroke: 100 mm Fgjlhcjy St I Secqkjd Total power: 2.5 kW Weight: approx. 2.5 t Oil fill: approx. 150 l Required space (W x D x H): approx. 0.95 x 1.5 x 1.95 m Equipment and delivery scope: Switch-over between travel / pressure Pressure control valve with gauge display Adjustable dwell time Documentation

Year of construction: 1990, condition: not inspected (used), Force: 125 tons (2x63) Speed adjustable 0-10mm/sec. Speed up: 20mm/sec Distances between columns 950x550mm Table size front 950x820mm Table size sidewise 1220x550mm Ram size see table Daylight: 700mm Stroke: 550mm Weight: 5500 kos Fgolhcegy Hzpocqkod Requested power: 18,5kw 2 precision cylinders steples adjustable strokeend

Condition: excellent (used), Year of construction: 1963, functionality: fully functional, pressing force: 28 t, manual spindle press 28 tons in very good condition Fslhccsquqpaoqkogd

Condition: good (used), Year of construction: 1991, functionality: fully functional, - Normal pressure force kN (Mp) 160 (16) - Maximum achievable pressure kN (Mp) 200 (20) - Spindle diameter 60mm Fgolevnbrxjhccqkjd - Spindle pitch per revolution 32mm - Number of guide columns 2 - Clear width between columns 410mm - Max. clear installation height between table top and ram 270mm - Ram stroke 210mm