Used Agie Mondo Star 50 for sale (102)

Year of construction: 1997, Condition: good (used), Agie EDM sinking machine Type: Futura V1PM Mondo star 50 X-travel: 500 mm Y-travel: 350 mm Z-travel: 350 mm Bed: 750 x 550 mm Workpiece weight max: 500 KG Dimensions workpiece max: 860 x 650 x 315 mm LxWxH Dimensions tub: 1020 x 680 x 400 mm LxWxH Njlhccoldg Sgeqmscr Dimensions machine: 195x155x255 cm LxWxH Year: 1997 Included documentation, software and tools

Condition: used, table length 400 mm table width 300 mm x-travel 300 mm y-travel 250 mm z-travel 250 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm Ncelhcjvwgq Socqmor

Condition: good (used), Year of construction: 2004, A well-maintained AgieCharmilles star hole drilling machine that operates reliably. Control unit: VDF monitor All travel speeds and the high-pressure pump can be controlled via the interface keyboard. Technical specifications: Travel range X 300 mm, Y 200 mm, Z 300 mm, auxiliary axis (manual) 100 mm Bore diameter range 0.3-3 mm Maximum depth 200 mm Worktable: Dimensions 500 mm x 300 mm Maximum workpiece weight 300 kg Water tank: Tank volume 10 l Ncsleu Tvikshccqmor Machine specifications: Dimensions 1,340 mm x 900 mm x 1,940 mm Total weight 1,200 kg Power supply: 400 V, 50 Hz, 4 kVA

Condition: ready for operation (used), Year of construction: 2005, Pallet changer TOOLPAL 3 R 12 compartment Njlhjr Hngloccqmecr

Condition: good (used), The machine is in good technical condition, after previous agreement the possibility of testing. Ncelhowdyqqoccqmjr

Condition: used, Year of construction: 2015, GF Agie Charmilles Mikron HPM-450U 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. 107.37.00.587 (2015), 10 Pallet Changer System, 60 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe, Cleanmist CM800 Filtration Unit Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Ncolhewaafasccqmor

Year of construction: 2014, Condition: used, x-travel 600 mm y-travel 450 mm z-travel 450 mm Control Heidenhain iTNC 530 table weight 90 Kg b-axis -120/+45 ° c-axis 360 ° number of spindle speeds 20.000 U/min/rpm taper HSK A 63 tool diameter 125 mm workpiece length 250 mm weight of tools max. 6 kg weight of the machine ca. 8 t Centre With System 3R Workpartner 1+ Pallet/Electrode Loading System & Heidenhain iTNC 530 Control Rotating Tilting Table With System 3R Automatic Loading/Clamping System. Maximum Table Load 90kg. Axis Travel Step Tec Spindle Speed 20,000rpm (36kW Motor). Spindle Taper HSK-A63. 220 Position ATC. Maximum Tool Ø125mm, Maximum Tool Length 250mm. Maximum Tool Weight 6kg. System 3R Partner 1+ Has 115 Positions & System 3R Macro Pallets Ncolhcjvuur Eecqmer

Condition: used, TECHNICAL DETAILS - Table dimensions : 680 x 450 [mm] - Max. part dimensions : 1000 x 550 x 220 [mm] - Max. part weight : 750 [kg] - Strokes X,Y, Z : 350 x 220 x 220[mm] - Strokes U,V : 350 x 220 [mm] - Wire diameter : 0,1 à 0,33 [mm] - Max. wear : +/- 30 [°] - Three-phased supply tension : 400 [V] - Dimensions ( floor surface x height) : 3490 x 23254 x 2410 [mm] - Weight : 2700 [kg] - Welding hours : 350 [h] EQUIPMENT - CNC CHARMILLES - Touch screen LCD 19' TFT - AC CAM EASY 4.0 license - Remote control Ncjlhev Annceccqmjr - Automatic threading and re-threading - Thermo stabilisation - Anti-collision - Large coil option : 16 and 25 [kg] - Central filter unit with 4 filters - 2 de-ionisation unit - CSW 900 cooling unit - Prearranged for rotary table

Condition: used, Year of construction: 2016, GF Agie Charmilles Mikron HPM-450U 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. 107.37.00.619 (2016), 10 Pallet Changer System, 60 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe, Cleanmist CM800 Filtration Unit Ncjlhccowaabujqmor

Condition: used, Year of construction: 2017, GF Agie Charmilles Mikron Mill E 500U 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. 107.125.00.0011 (2017), 7 Pallet Changer System, 60 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Nslhewaaa Doccqmjcr

Condition: ready for operation (used), Year of construction: 2008, An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. Ncolhccju Ilbuoqmer

Condition: used, Year of construction: 1995, Functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Ncolhccqjtylpismer

Condition: used, Year of construction: 1995, Functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Ncjlhccstylpceqmer

Condition: excellent (used), Year of construction: 2011, Axes X/Y/Z ... 350/220/220 mm Movements U/V ... 350/220 mm Speed ... 0...900 mm/min Max. workpiece dimensions ... 1000 x 550 x 220 mm Max. workpiece weight ... 750 kg Nolhjwffgasccqmjcr Machine dimensions ... 2020 x 2050 x 2000 mm Machine weight ... 2450 kg

Year of construction: 2006, Condition: ready for operation (used), General Data Measurements width 2200 mm Measurements depth 2400 mm Measurements height 2540 mm Machine weight 5220 kg Main Drive Number of axis 4 Nslowfuqbehccqmocr Movement X-Axis Movement 700 mm Y-Axis Movement 500 mm Z-Axis Movement 400 mm 1-AXIS Movement 360 Workpiece Workpiece X 920 mm Workpiece Y 550 mm Workpiece Z 370 mm Workpiece weight 2000 kg Table Outer length 870 mm Outer width 550 mm This 4-axis AGIE AGIETRON SPIRIT 4 erosion machine was manufactured in 2006. It features a machine weight of 5090 kg, dimensions of 3000 x 3000 x 2540 mm, and a C-axis with full 360º rotation. Capable of handling workpieces up to 2000 kg and dimensions of 920 x 550 x 370 mm. A robust choice for precision erosion tasks. For more information about this erosion machine, please reach out to us. Application Types EDM

Condition: used, Year of construction: 2006, Diesinking / EDM Travel distance X: 700 mm Travel distanceY :500 mm Travel distance z: 400 mm max. workpiece size X: 750 mm max. workpiece size Y: 1100 mm Ncslev D Nr Eohccqmsr max. workpiece size Z: 370 mm max. electrode weight: 80 kg max. workpiece weight: 2000 kg electrode changer: 15 - time C-axis generator: 104 Ampere

Year of construction: 2014, Condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 600 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 500 mm MAX ELECTRODE WEIGHT: 50 Kg MAX  PIECE WEIGHT: 2000 Kg Nelhccqjh St D Hsmscr MAX PIECE SIZE: 1200 x 800 x 350 mm TANK SIZE: 1280 x 850 x 390 mm CONTROL UNIT: VISION 5 WEIGHT: 5500 Kg OVERALL DIMENSIONS: 1800 x 2900 x 3200 mm ACCESSORIES: C-AXIS NOTE: POSSIBILITA' DI AGGIUNTA MAGAZZINO CAMBIO ELETTRODI.

Condition: good (used), Year of construction: 2017, The machine is in good technical condition. X, Y, Z axes: 350 x 220 x 220 mm Rapid traverse (X, Y and U, V axes): 3,000 mm/min Max. bevel: ± 45/220 (± 30/220 standard) °/mm Worktable size: 680 x 450 mm Njlewd N T Ijhccqmscr Max. workpiece dimensions (wxdxh): 1,000 x 550 x 220 mm Max. workpiece weight: 750 kg Max. dielectric level: 240 mm Max. noise level: 76 db Machining time: 4,637 hours Total dielectric volume: 760 l Dimensions l x w x h: 2015 x 2200 mm x 2030 mm Machine weight: 2450 kg A working inspection is possible by prior arrangement.

Condition: good (used), Year of construction: 2004, table width: 450 mm, table length: 600 mm, overall weight: 6,000 kg, controller manufacturer: AGIEVISION, CONTROLS .. AGIEVISION TECHNICAL SPECIFICATION .. Table-size length: 600 mm .. Table-size width: 450 mm .. Adjustment of x-axis: 350 mm .. Adjustment of y-axis: 250 mm Ncolhcev Uathocqmsr ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 6000 kg Regular service by AGIE Operating hours: 122'829h Eroding hours: 23'101h SW disks available

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 253, GF Agie Charmilles, type: Agie Cut Evolution 3, CNC wire cutting machine 9KVAX50H3, serial no. 253 (2002) (GW 4400kg) Complete with power cabinet and accessories. Ncolhswcld Heccqmor

Condition: excellent (used), Agie Wire EDM Model: AGIE Cut Classic V3 Control: AGIE X – axis Travel: 500mm Y – axis Travel: 350mm Z- axis Travel: 426mm Nelhjv Hrywsccqmecr Workpiece Length: 1050mm Work piece width: 650mm Work piece height: 420mm Work piece weight: 800 kgs Dimensions: 1940 x 2300 x 2600mm high Weight: 3460 kg

Condition: used, Year of construction: 2005, Wire erosion / EDM Travel distance X: 350 mm Travel distanceY :250 mm Travel distance z: 256 mm max. workpiece size X: 750 mm max. workpiece size Y: 550 mm Nslhccevtfpxjqmjcr max. workpiece size Z: 250 mm max. workpiece weight: 450 kg with AWF ( Automatic Wire Feeding ) U / V axis: +/- 70 mm submerged Taper 30° at height 100 mm

Condition: good (used), Year of construction: 2004, Machine is in very good condition. Parts shown by hand not come. Njlhjvkuqtsccqmjcr

Condition: good (used), The machine is in good technical condition, after previous agreement the possibility of testing. Nolhcowdyq Rjcqmjcr

Condition: good (used), Year of construction: 1997, Parts shown by hand not come. Ncelhcjpy Errscqmjr